Used Great Cnc Milling for sale (16,039)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 1,10,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC Lodpfx Anjyahv So Iohi CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: excellent (used), Year of construction: 2006, For sale: A reliable vertical CNC machining center Yamazaki Mazak Nexus VCN-510C – a high-end production machine from the renowned Japanese manufacturer MAZAK, known for its precision, durability, and stable operation in industrial manufacturing environments. Lhsdpjyha Ivofx An Iji The VCN-510C is ideally suited for machining steel, aluminum, and workpieces requiring high accuracy and repeatability. Thanks to the MAZATROL 640M control, the machine offers intuitive operation and rapid production setup. Technical specifications: Year of manufacture: 2006 Control: MAZATROL 640M X-axis travel: 1,050 mm Y-axis travel: 510 mm Z-axis travel: 510 mm T-slot table Automatic tool changer (ATC) Central lubrication Electrical cabinet Weight: 7,100 kg Low operating hours

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, table width: 700 mm, table length: 2,000 mm, Control: HEIDENHAIN TNC-426 Travel of the X-axis: 2000 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Ledpfxsvfr Hbj An Iehi Taper tip: ISO 50 Speed range: 20 - 3000 rpm Spindle power: 17 kW

Condition: used, Year of construction: 2024, operating hours: 118 h, functionality: fully functional, turning length: 2,050 mm, turning diameter over cross slide: 600 mm, turning diameter: 550 mm, spindle motor power: 15 W, spindle speed (min.): 4,000 rpm, spindle bore: 116 mm, travel distance Z-axis: 2,050 mm, 2024 MODEL CNC LATHE HYUNDAI WIA 400 LMC Lhsdpfx Ajzlux Nsn Iji C-AXIS (4 LIVE TOOLS) OPERATING HOURS: 118 HOURS BAR CAPACITY: 116 MM MACHINE IS CLEAN AND WELL-MAINTAINED. NOTE: THE MACHINE WILL BE AVAILABLE IN STOCK IN ISTANBUL ON JULY 20TH.

Condition: used, Year of construction: 2008, machine/vehicle number: 220028, CNC control: HEIDENHAIN iTNC 530, travel ranges: X-axis 4300 mm, Y-axis 1500 mm, Z-axis 1300 mm, table size 4970 mm x 1200 mm, max. table load 15,000 kg/m, tool holder ISO 50, multi-angle milling head 45°, automatic angular positioning of axes B and A, spindle motor power 22 kW, hydraulic rotary lock, working feed rate 10,000 mm/min, rapid traverse rate 20,000 mm/min, with coolant system, total spindle operating hours: 25,496 hours. Lhodozn A U Repfx An Ioi

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° Lodjvt D D Uspfx An Iohi - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: used, Year of construction: 2007, turning diameter 300 mm turning length 600 mm control FANUC, 18i-TB turning diameter over bed slide 230 mm travel x1 165 mm travel z1 700 mm travel x2 190 mm travel z2 720 mm travel -y axis +/- 50 mm main spindle bore 76 mm main spindle speed 5.000 U/min main spindle drive 22 kW max. torque on the spindle 208 Nm sub spindle bore 76 mm sub spindle speed 5.000 U/min sub spindle drive 22 kW max. torque on the spindle 208 Nm tool turret 2 x 12 Stat. number of driven tool stations 2 x 12 speed of driven tools 5.000 U/min max. torque 47 Nm tool taper BMT 55 C-axis resolution 0,001 ° rapid traverse x + z axis 20 / 40 m/min rapid traverse y-axis 7,5 m/min work piece power 5,5 kW total power requirement 68,4 kVA Accessories: collet fixture make KITAGAWA, CRS 66, on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, bar loader make HYDRAFEED, model MULTIFEED MX-1B for Ledsy Tpliopfx An Ishi bar dia. 3 - 80 mm and bar length up to 1650 mm, chip conveyor, coolant with belt filter device

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Ljdpfx Aoutuyisn Ijhi Weight approx. 8 tons good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Lhodpfx Anju Tln Ne Iei Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Lhedjv R E Rdopfx An Ioi Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Lhsdpfx Anjhik Ezs Iji Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA Ledpoxcgtgofx An Iohi - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Ledpfx Anow A Af Is Iohi Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Lhodpfot Ac Efox An Iei Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: used, CNC milling machine ABENE, Type VHF-360TI Serial No. 36084 Year of manufacture 2008 CNC control HEIDENHAIN TNC 320 Travel ranges X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle mount SK 40 Spindle speed 55 - 3000 rpm, 2 speeds Feed rate 30 - 4000 mm/min, stepless Rapid traverse rate (X + Y-axis) 4000 mm/min. Rapid traverse rate (Z-axis) 2000 mm/min. Distance spindle nose to table 20-495 mm Motor power spindle drive 7.5 kW Power supply 400 Volt, 50 Hz - CNC path control HEIDENHAIN TNC 320 with interfaces RS232, USB and LAN - Electronic handwheel for X, Y and Z axis - Mechanical handwheels for X and Y axis - Spindle speed can be manually switched with 2 gear stages (Stage 1 = 55-700 rpm) + (Stage 2 = 701-3000 rpm) - Inclined bed design with side-mounted, swiveling spindle head +/- 50° - Inclined bed adjustment manually via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication Ledpety A Ehsfx An Ijhi - Coolant system with electric coolant pump located beside the machine - Machine light - Control cabinet firmly attached to the machine - Operating hours read on control system when switched on = 14780 hrs. - Operating hours read on machine when switched on = 12980 hrs. - Operating hours read on program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Condition: good (used), FANUC 31i-B control system C-axis on both spindles Milling drive on the upper turret Lhedpozncrcsfx An Ioi Milling drive on the lower turret B-axis on the upper turret: +/- 91° Y-axis on the upper turret: +/- 40 mm Y-axis on the lower turret: +/- 32.5 mm Larger main spindle: A5 Bar diameter: 51 mm Larger counter spindle: A5 Bar diameter: 51 mm Polygon turning function Unloading with gripper hand on the upper turret Intelligent handwheel AME inclined bed filter system 10-70 bar

Condition: like new (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, turning length: 1,070 mm, turning diameter: 460 mm, spindle motor power: 22 W, spindle speed (max.): 3,500 rpm, travel distance X-axis: 265 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, ONLY 10 HOURS !!!!! There are 8 Doosan CNC Turning center Like this in our warehouse 1 Set DOOSAN GT2600 LM CNC Turning center With C Axis - 12 inç - 10 Hours Lsdpfozk I Rvsx An Iehi 2 Set DOOSAN GT 2600 CNC Lathe 12 inç 10 hours 2 Set DOOSAN GT2100 CNC Lathe 10 inç 10 hours 3 Set DOOSAN Lynx 2100 CNC Lathe 8 inçh 10 Hours you can visit and check all machine

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Ljdpfx Asznmbusn Ijhi

Condition: used, Year of construction: 2004, emco VMC 300 D - CNC Milling Machine - SIEMENS Sinumerik 810D CNC Control - Tool magazine for 12 tools - CNC dividing head / 4th axis - Coolant system - 41,300 operating hours - Year of manufacture: 2004 Technical data Working area: - Travel in X-axis: 420 mm - Travel in Y-axis: 330 mm - Usable travel in Z-axis: 240 mm - Workpiece dimensions L x W x H: 400 x 300 x 190 mm - Distance between spindle nose/table surface: 210 - 450 mm Milling table: - Clamping area L x W: 850 x 325 mm - Max. table load: 150 kg - 3 T-slots according to DIN 650: 14 mm - T-slot spacing: 100 mm Milling spindle: - AC motor, power (100/60% duty cycle): 9 / 11 kW - Speed range (continuously variable): 0 - 5000 rpm - Sound pressure level at 5000 rpm: 72 dB A - Max. torque: 100 Nm Machining performance: - Milling performance in steel (16 Mn Cr5 - 790 N/mm²): 220 cm³/min - Drilling performance in steel: ø 25 mm - Thread cutting performance in steel: M20 Feed drive (AC motor with individual drive + ball screw): - Feed rate in X/Y/Z axes: 0.01 - 12000 mm/min - Rapid traverse in X/Y/Z axes: 12 m/min - Feed force in X/Y axes: 6000 N - Feed force in Z axis: 8800 N - Resolution: 0.001 mm - Positioning accuracy X/Y/Z: 0.004 mm Tool system: - Tool magazine: Drum with direction logic - Number of tool stations: 12 - Insertion force: 6000 N - Max. permissible tool weight: 5 kg - Total permissible tool weight in magazine: approx. 36 kg - Max. tool diameter: 100 mm - Max. tool length: 220 mm - Chip-to-chip time according to VDI 2852 T1/T2/T3: 8.9 / 7.0 / 7.0 s - Tool change time (without traverse movements) T1/T2/T3: 5.8 / 3.9 / 3.9 s Lubrication system: - Guide rails & ball screw: automatic central oil lubrication - Main spindle bearing: grease lubrication Coolant system: - Tank capacity: 100 l - Max. flow rate: 10 l/min - Max. delivery pressure at 50 Hz: 3.7 bar - Coolant supply: 4 nozzles, external Electrical connection: - Power supply: 3/PE 400 V 50/60 Hz - Connected load: 15 kVA Pneumatic connection: - System pressure: 5 - 10 bar - Required minimum air flow (related to 1 bar): 750 l/min - Average air consumption (related to 1 bar): 180 l/min Dimensions: - Dimensions W x H x D: 2300 x 2450 x 2400 mm Lodpfxozl D Awo An Iohi - Weight: approx. 2900 kg

Condition: defective spare-parts repository (used), Year of construction: 2003, machine/vehicle number: 07400001041, Sales location: Landgrafenstraße 45, 41069 Mönchengladbach TWIN 102 Year of manufacture: 2003 Siemens 840 D Powerline Main spindle 33 KW, 3200 1/min Counter spindle 21 KW Travel distances: Saddle 1 X-axis 300 mm Y-axis 80 mm Z-axis 600 mm Turret, 12 positions, VDI 30, 12 driven Saddle 2 X-axis 180 mm Z-axis 650 mm Turret, 12 positions, VDI 30, 12 driven Saddle 3 X-axis 175 mm Z-axis 670 mm Tailstock Known faults: Lsdpfx Anezn H D As Iohi Z3-axis defective

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 04780000161, Sales location: Landgrafenstraße 45, 41069 Mönchengladbach Machine: Twin 500 Lhsdpfx Ajzn H Dvjn Iei Machine number: 04780000161 Year of manufacture: 2001 Siemens 840 D Main spindle: 45 kW, 3200 rpm, swing: 610 mm, spindle distance: 1850 mm Counter spindle: 45 kW, 320 rpm Travel ranges: Saddle 1 X-axis: 605 mm Y-axis: 210 mm B-axis: 240° Z-axis: 1470 mm Turning/milling spindle: 10 kW, HSK 63, 12000 rpm Saddle 2 X-axis: 267 mm Z-axis: 1440 mm Turret Saddle 3 Z-axis: 1460 mm Tool magazine: 80 positions

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1114S49, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, bar passage: 26 mm, total height: 1,700 mm, total length: 7,000 mm, total width: 2,000 mm, overall weight: 3,000 kg, feed force Z-axis: 310 N, controller manufacturer: FANUC, controller model: SERIES 18i-TB, MANURHIN KMX 3260 CNC turning center - Stroke of the moving spindle carriage: 160 mm - Type of cross slide: two turret heads, 6 positions - Number of tool stations: 12 - For external machining: 1 - 12, for internal machining: 1 - 11 Lodpfxezdzfao An Ijhi - With workpiece ejector - Stroke of the cross slide: 35 mm - Max. cross-section for external tools: 16 x 16 mm - Diameter of the internal tool holder: 25.4 mm - Ball screw diameter: 25 mm - Pitch: 5 mm - With C-axis - Driven tools - Incl. bar feeder FMB, type: TURBO 3-36 Note: The item must be collected between August 4th and August 13th, 2026, on a date to be confirmed. FCA D-79268 Bötzingen - loaded onto a truck.

Condition: as good as new (ex-display), CNC Engraving Machine, CNC Milling Machine, CNC 3020 Desktop Engraving Machine / Mini CNC Milling Machine – 200 × 300 mm Working Area, Used Machine Manufacturer Engraving Machine Model 3020 Overall Dimensions Width: 400 mm Depth: 530 mm Height: 400 mm Controller Dimensions Width: 290 mm Depth: 325 mm Height: 175 mm Shipping Dimensions 500 × 400 × 390 mm 410 × 345 × 280 mm Technical Specifications Machine Type: Engraving Machine / Mini CNC Milling Machine Model: 3020 Serial Number (SN): 2501053020CZ12-11 Effective Working Travel: X-axis: 200 mm Y-axis: 300 mm Z-axis: 50 mm Power Supply: AC 200–240 V, 50 Hz (operates from a standard 230 V household/workshop power supply) Manufacturer Information Manufacturer: Changzhou Huajiang Electrical Co., Ltd. (China) European Importer / Distributor: CNCworld Group Sp. z o.o. (Jednia-Letnisko, Poland) Certifications CE Lsdpfx Anszka R Uj Ijhi RoHS FCC

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 15995729164, spindle speed (min.): 24,000 rpm, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, overall weight: 3,400 kg, controller manufacturer: Siemens, controller model: 840D, workpiece length (max.): 2,340 mm, workpiece width (max.): 1,650 mm, workpiece height (max.): 2,500 mm, 2013 DMG Mill Tap 700 Made in Germany. Ljdjzmggnjpfx An Ishi Equipped with below options 24000rpm spindle, 25 tool station (5th Axis) LEHMANN EA-507 CNC Rotary Table Production package TSC 20bar Chip conveyor Renishaw probe OMP 60 + OTS tool setter Main Spindle needs repair Technical Specifications Year of Manufacture: 2013 Control Unit: Siemens 840D Solution line X-Axis Travel: 700 mm Y-Axis Travel: 420 mm Z-Axis Travel: 380 mm Table Size: 840 x 420 mm (Max load: 400 kg) Spindle Taper: BT 30 / BBT 30Spindle Speed: 24,000 rpm Tool Changer (ATC): 25-station pick-up system Rapid Traverse (X/Y/Z): 60 / 60 / 60 m/min Machine Weight: Approx. 3,400 kg Overall Dimensions: 1,650 x 2,340 x 2,500 mm Included Accessories / Equipment pL LEHMANN EA-507 CNC Rotary Table (5th Axis) with complete cabling/integration.

Condition: used, Year of construction: 2007, turning diameter 65 mm turning length 150 mm control Siemens 840D spindle passage 75 mm turning length 150 mm c-axis 2x 0,001 ° gripping station 65 mm speeds 5000 U/min rapid traverse 30 m/min turret (x-stations) 3x12 Number of axles 10 St. number of toolholder-holes 36 chip conveyor ja / yes kW coolant filtering unit ja / yes kW Number of working hours 35000 h total power requirement 22 kW weight of the machine ca. 9 t dimensions of the machine ca. 4,4 x 2 x 2,3 + Iemca m DMG Sprint 64 Linear CNC lathe, built in 2007, 10 axes, 2 spindles, 3 turrets with Iemca Master 880 loading magazine Accessories: Lhedpfx Anozdk Evj Ioi a large number of tool holders in total 104 off, 24 of them are driven tool holder