Used Turning And Milling Centre for sale (22,832)

Condition: used, Year of construction: 2010, turning length: 6,500 mm, turning diameter: 880 mm, spindle bore: 165 mm, controller manufacturer: Siemens, controller model: 840 D, _____ In General: Year of manufacture:2010 Control system:Siemens 840 D Rotation diameter:900 mm Turning diam.: 880 (750) mm Turning length:approx. 6,500 mm Gbjdpfxsx Axyls Ah Heg Spindle bore: 165 mm Tool holder:Capto C 8 Spindle: Speed:1,600 rpm Power: 60 kW Torque:4,472 Nm C-axis: 0,001° Spindle boar:165 mm 3-Jaw Chuck: SMW Autoblock KNCS-N-630-165 Tool carrier (X/Y/Z): Technology:Swivel head with milling spindle Speed:6,000 rpm Power:30 kW Tool holder:Capto C 8 Torque:315 Nm X-axis:920 mm Y-axis:500 mm (-200/+300 mm) Z-axis:6,870 mm B-Axis: 200° (-110° / +90°) Tailsstock + Steady rest: Quill diameter:180 mm Quill stroke:200 mm Steady rest slides: 2 pieces, 400 mm wide Steady rest I: SMW Autoblock SLU (45-310 mm) Steady rest II: SMW Autoblock SLU (125-460 mm) Tool magazin I: Technology: Wheel magazine (double) Number of stations: 72 Tool changer: Double gripper on shuttle Tool diameter max.: 110 mm (250 mm) Tool length max.: 800 mm Tool weight max.: 25 kg Tool magazin II: Technology: Pick-up magazine Max. usable length: 1,550 mm Max. usable weight: 150 kg Equipment: Tool magazine:72 stations Chip disposal:Chip conveyor Coolant supply:Internal coolant system Coolant temperature control:Immersion recooler Workpiece measurement: Touch probe Steady rest:2x SMW Autoblock Lynette 3-Jaw chuck: SMW Autoblock KNCS-N-630-165 Tool holder: Various Capto C8

Condition: refurbished (used), Year of construction: 2008, WFL Millturn M120X/3000 WORKING RANGE centre distance = 3000mm Swing over bed = 1220mm Swing over slide top = 1140mm Longitudinal travel (Z) = 3330mm Face travel (X) = 920mm Distance spindle nose to tailstock tip = 3812mm ROTATING SPINDLE Spindle head DIN 55026 form size A15 spindle bore 165mm MAIN DRIVE AC-drive with 2-stage gearbox Drive power 100% ED 60kW Max. Spindle speed 1600 1min Max. Spindle torque 100% ED 4472 NM Gbjdpfel Smhlsx Ah Heg C-AXIS. SERVO-CONTROLLED MAIN SPINDLE Smallest programmable increment 0.001°. Max. Speed 20min-1 Max. Torque on spindle 100% ED Nm 3000 Holding torque of disc brake Nm 6000 FEED DRIVE Cross slide, rotary drilling-milling unit: AC servo drive Feed force longitudinal (Z) kN 30.0 Feed force plane (X) kN 31,5 Feed force Y-axis 55kW kN 25.0 Rapid traverse speed: longitudinal (Z) m/min 15.0 plane (X) m/min 15.0 Y-axis m/min 12.5 Rapid traverse B-axis °/s 90 BALL SCREW LENGTH (Z axis) ø x pitch mm 63X20 PLAN (X-axis) ø x pitch mm 63X10 RIDGE STOCK Quill diameter mm 180 Quill stroke mm 200 Quill force (adjustable) N 5400-40000 Quill with built-in bearing MK 6 TOOL CARRIER (single tool carrier, rotary drilling-milling unit) AC drive, drive power 100% ED kW 55 Spindle speed max. min-1 3200 Max. Torque at spindle 100% ED Nm 730 Travel perpendicular to X/Z plane (Y axis) 55kW mm 650(-300/+350) Tilting angle of the milling spindle (B axis) ° -110/+90 Spindle head for tools according to DIN 69893 HSK-A100 Milling spindle diameter in front bearing mm 130 TEMPERATURE STABILISATION through controlled cooling circuit with compressor - cooling unit EXTERNAL TOOL MAGAZINE: Number of Storage spaces (space-coded) Size HSK100 pcs 90 Max. Tool length mm 500(800) DIMENSIONS Length(max. tool magazine with chip conveyor) m 13 Height m 4,1

Condition: good (used), Year of construction: 2012, 750mm Swing, Gbodpfx Aexqyg Nsh Hog 500mm max. machining diameter, 1300mm max turning length, 3000rpm main spindle, 65mm bar capacity, 8,000rpm milling 20kW, C axis 0.001 degrees, Y axis - 90/+120mm, 40 station ATC, , milling speed 4,000rpm, 30kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant, tool setter, parts catcher, barfeed unit.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 302652, overall weight: 4,670 kg, Equipment: documentation/manual, MAZAK machine for sale, available for inspection in CZ-69613 Sardice always between 8 am and 2 pm. The selling price is excluding VAT and excluding transport and dismantling. Gsdpfowrbikex Ah Hsbg

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min Gbodpfjxd Ay Ejx Ah Heg X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool Taper Capto C6 Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, CNC-Turning and Milling Centre - Horizontal / Brand: DOOSAN Type: PUMA 5100 XLYB / Year of construction: 02/2022 (Start-up: 07/2022) Universally applicable, highly stable, horizontal turning centre with high performance. For heavy-duty machining of medium and large parts. Operating hours (August 1st, 2025): 592 h Condition: As new / ready for immediate use. The machine can be inspected by appointment under power. TECHNICAL DATA: - Swing over bed: 880 mm - Swing over saddle: 817 mm - Recom. turning diameter: 380 mm - Max. turning diameter: 550 mm - Max. turning length: 3.040 mm Capacity: - Chuck size: 533 mm - Chuck work weight (incl. chuck): 1.400 kg - Shaft work weight (incl. chuck): 5.700 kg - Bar working diameter: 165,5 mm Power source: - Electric power supply (rated capacity): 68,79 kVA Machine dimensions: - Length: 7.303 mm - Width: 2.632 mm - Height: 2.937 mm - Weight: 16 tons EQUIPMENT: - CNC-Control: FANUC i PLUS - Steady rest, Brand: SMW-Autoblok - Tailstock, MK5 - Tool magazine - Chip conveyor (hinged belt) - Flushing gun - Documentation - CE marking A wide range of additional accessories can be additionally purchased. There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale - Godpfjw Hg Riox Ah Hebg Detailed technical data sheet and information on equipment available on request.

Condition: used, _____ Description: Year of manuf. : 2022 Control : Okuma OSP-P300 SA Turning diam. : 650 mm Turning length : 1000 mm Main spindle: Technology:Motor spindle Speed:4,200 rpm Power:22 kW Torque:427 Nm spindle bore:91 mm Hollow clamping cylinder:86 mm C-axis:High precision package Chuck:SMW KNCS-N 275-86 K8 Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:22 kW Torque:420 Nm spindle bore:80 mm Hollow clamping cylinder:77 mm C-axis:High precision package Chuck:SMW BHD-FC 210-52-3 Tool carrier X/Y/Z/B: Technology:Milling spindle Speed:12.000 rpm Power:22 kW Torque:120 Nm Tool holder:HSK 63 Gbodowu I Iropfx Ah Hsg Y-axis:250 mm (+/- 125 mm) B-axis:240° Tool magazin: Number of stations:80 Equipment: Measuring systems:Direct in X/Y/Z axis (glass scales) Chip disposal:Chip conveyor Coolant supply:IKZ system, 70 bar Coolant temperature control:Deltatherm E4 Chip rinsing:working area, manual gun Accuracy package:C-axis high accuracy Software package:5-axis auto-tuning Software option:Multifunction tool Gear cutting software package:Gear hobbing, gear peeling Control extension:Dialogue programming Workpiece measurement:Renishaw measuring probe Tool measurement:Tool setter Tool breakage monitoring:Renishaw TRS2 B-axis:NC function and turning function Bar loader:LNS Quickload Servo III+ Automation preparation:Robot interface Work area door:Automatic Set-up mode:Electronic handwheel

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 WORKING RANGE center distance mm 2000 swing over bed, turning diameter mm 690 Gbsdpfxsu Hl R Tj Ah Hjg MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 TAILSTOCK quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 quill with installed live center MK 5 TOOL HOLDER (single tool holder, turning-boring-milling unit) AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3

Condition: good (used), Year of construction: 1999, operating hours: 1,887 h, functionality: fully functional, machine/vehicle number: 142031, spindle speed (max.): 5,000 rpm, Mazak Super Quickturn 200 (1999). Gbedpotz A Dfofx Ah Heg Serial Number: 142031. Date: 1999. Weight: 5000kg/11,000lbs. Mazak tooleye measuring system. Tailstock. Swarf Conveyor. Parts Catcher. 12 Station Turret. Mazatrol PC-Fusion- CNC 640T control panel. Main Spindle Max 5000RPM. Collet Chucks and Collets. Hydrafeed barfeeder NOT included. This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs.

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840 Dsl Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2013 Control system:Siemens 840 Dsl Turning length:1,185 Swing diameter:540 mm Bar capacity:75 Main spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush Sub spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush + flush through spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on traveling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:Capto C6 X-axis:450 mm Y-axis:200 mm Z-axis:1,200 mm B-axis:+/- 110° Position sensors:Direct scales (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Gsdpfx Ahoxl Nfqe Hobg Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Automation: Technology:Portal loader with stacking magazine Workpiece diameter:50 - 200 mm Max. workpiece height:230 mm Max. workpiece weight:15 kg Number of stacking attachments:20 Max. load capacity per stacking attachment:40 kg Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 80 bar Tool magazine:Chain magazine, 120 stations Workpiece measurement:Renishaw touch probe Tool breakage monitoring:Swivel wire Automation:Portal loader with stacking magazine Emulsion mist separator:Mechanical Setup operation:Electronic handwheel Workspace door:Automatic Chuck:2x SMW KNCS 260 Tool holders:Various Capto C6 holders

Year of construction: 2007, condition: refurbished (used), CNC-TURNING-BORING-MILLING CENTRE M35 MILLTURN WITH TAILSTOCK AND CONTROL SINUMERIK 840D PL WORKING RANGE center distance mm 2000 max. turning diameter mm 420 longitudinal travel (Z) mm 2150 cross travel (X) mm 550 distance spindle flange to center mm 2300 turning length mm 2090 URNING SPINDLE spindle head DIN 55026 form A size 8 spindle diameter in front bearing mm 160 spindle bore mm 77 MAIN DRIVE Built in motor Gbsdpfx Ahem H Tute Hjg drive power 100%(40%) duty cycle kW 29(33) max. speed min-1 4000 max. torque at the spindle 100%(40%) duty cycle Nm 550(630) AILSTOCK - MECHATRONIC Movement via AC-servodrive,mechatronic function Rapid traverse motion m/min 10 Feed force programmable daN 1200 Installed live center MK 5 TOOL HOLDER (single tool holder, Turning-Drilling-Milling Unit) C-drive drive power 100%(40%) duty cycle kW 15(20) speed range max. min-1 9000 max. torque at the spindle 100%(40%) duty cycle Nm 125(165) max. torque at the B-axis Nm 900 travel vertical to the X/Z-plane (Y-axis) mm 250[-100/+150] pivot capability of the milling spindle (B-axis) ° +/-110 tool accommotation suitable size 63 spindle diameter in front bearing mm 80

Condition: excellent (used), Year of construction: 2007, operating hours: 2,770 h, machine/vehicle number: 199581, Mazak Vertical Centre Nexus 510C-II (2007) 4th axis Serial number: 199581 Low working hours: 2770 Matrix Nexus control Kitagawa 4th axis EIA/Mazatrol Control Mazatrol tool length measuring system Gjdpfev D E Iijx Ah Hjbg Through coolant CAT40 tooling 12,000 rpm main spindle Full set of manuals This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs.

Condition: used, _____ Description: Year of manuf. : 2009 Control : Siemens C200-4D SL In General: Year of construction:2009 Gbedpfxjvxmy Ns Ah Hsg Control system:Siemens 840 Dsl (C200-4D SL) Bar capacity:65 mm Milling spindles:18,000 rpm Main spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° Z-axis:390 mm Bar capacity:65 mm Clamping cylinder:Hollow clamping cylinder Chuck:3-jaw chuck Sub spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° X-axis:600 mm Z-axis:390 mm Bar capacity:65 mm Chuck:3-jaw chuck Tool carrier I: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 X-axis:350 mm Y-axis:160 mm (+/- 80 mm) B-axis:230° Tool carrier II: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 Y-axis:160 mm(+/- 80 mm) B-axis:230° Tool magazin: Technology:Chain magazine Number of stations:80 pieces Tool changer:Double gripper Tool length max.:180 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system with filter Parts removal:Gantry-type pick-up Bar loader interface:Electrically prepared Tool monitoring:Drill breakage monitoring

Condition: used, Year of construction: 2024, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2024 Control : Siemens 840 Dsl - Operate Turning diam. : 400 mm Turning length : 1100 mm Main spindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):17 kW Godpfx Ahex Ih Rtj Hsbg Torque (max.):345 Nm Clamping cylinder:Hollow clamping cylinder Bar capacity:67 mm Workpiececlampig:3-Jawchuck, Schunk Rota THW 315-104 Sub spindle: Technology:Motorspindle Speed:5,000 rpm Power (max.):17 kW Torque (max.):345 Nm Clamping cylinder:Partially hollow clamping cylinder Workpiececlamping:3-Jawchuck, SMW Autoblok 250 BB Movement in Z:1.200 mm Thrustforce (Tailstockfunction):2,5-6 kN Tool carrier (X/Y/Z/B): Technology:Travelling column with millingspindle Speed:12.000 rpm Power (max.):10,5 kW Torque (max.):90 Nm Taper:HSK-A63 Swivelrange in B:+/- 120° In general: Toolmagazine:Chainmagazine, 60 Stations Movement in X/Y/Z:750/200/1.100 mm Rapid travers in X/Y/Z:40 m/min Equipment: Positionsensor:Direct scales in X/Y Chip disposal:Chip conveyor Coolant supply:Internal coolant with Paperbeltfilter and Highpressure, 20 bar Workpiecemeasurement:Renishaw RMP 40 Toolbreakagecontrol:Blum Z-Nano Toolmonitoring:Easy Tool Monitor Automation:Automationpackage (Automatic Door, electrical Interface Robo2Go) Emulsion mist separator:Meachanical extraction, AFS 1100 :Set-up operation. Electronic handwheel Technology cycle:Alternating speed Digital Manufacturing:IoT Connector Further Equipment:Spindlechiller, Rinsing pistol

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, DOOSAN VC3600 YEAR 2018 TWIN PALLET Gjdpfx Ajw Tangeh Hjbg 3 AXIS 20 TOOLS BT40 12K SPINDLE 22 KW SPINDLE THROUGH SPINDLE COOLANT X TRAVEL 520 MM Y TRAVEL 360 MM Z TRAVEL 465 MM MACHINE CAN BE VIEWED RUNNING VIA APP FOR VIEWING PLEASE CONTACT ME AT THE OFFICE OR IF YOU WANT A WALK ROUND VIDEO LEAVE YOUR MOBILE WITH LYNDSAY IN THE OFFICE

Condition: used, Year of construction: 2002, functionality: fully functional, turning diameter: 1,600 mm, spindle motor power: 45 W, spindle speed (max.): 1,500 rpm, travel distance X-axis: 1,200 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, Daewoo Doosan PUMA V-1200M CNC vertical lathe, year 2002, equipped with FANUC Series 18-T control, designed for machining large and heavy workpieces, ideal for heavy-duty and industrial sector applications. Main technical specifications: Maximum swing and turning diameter: Ø 1,600 mm Maximum turning height: 1,200 mm Maximum workpiece weight: 6,000 kg Chuck diameter: Ø 1,200 mm RAM axes: X (horizontal): 1,200 mm Z (vertical): 900 mm C axis: 360° rotation, minimum positioning increment 0.001° Main spindle: Speed: 2 ÷ 320 rpm (2 ranges) Gbedpfswt S Rhsx Ah Hog Power: 37/45 kW RAM driven spindle: Taper ISO-50 Speed: 15 ÷ 1,500 rpm RAM section: 240 x 240 mm Tool turret: 16 stations, with BT-50 type tools Max. tool diameter: Ø 400 mm Max. tool length: 450 mm Max. tool weight: 50 kg Maximum tool weight in magazine: 600 kg Feeds: Rapid traverse X/Z axes: 10,000 mm/min Working feeds X/Z axes: 3,000 mm/min Included accessories: Chip conveyor Coolant tank with pumps Spindle line air conditioner Various fixed and driven tool holders Manuals, electrical diagrams, CE declaration Solid and high-performance machine for vertical machining of large workpieces with high precision.

Condition: new, Year of construction: 2002, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 13347, Brand new showroomodel: Technical specifications: · Automatic feeds and rapid traverses adjustable by DC motor and PLC control · Hardened and ground main spindle gears · Hardened and ground slideways with central automatic lubrication · Automatic gearbox lubrication, main spindle equipped with electric brake · All controls on one side of the machine · Hardened and ground ball screw spindles for precise movement · Automatic hydraulically operated tool release and automatic clamping · for longitudinal, transverse, and vertical movement · Clamping surface (hor) fixed angle table 800x400 mm · 7 T-slots 14mm, 50mm center-to-center · Max. workpiece weight 400 kg · Mounting surface (vert) base slide 1000x260 mm · 5 T-slots 14mm, 50mm center-to-center 50 mm Longitudinal travel of base slide/automatic 500 mm Cross travel of main spindle slide/automatic 350 mm Vertical travel of base slide/automatic 400 mm Clamping surface (hor) universal tilting rotary table 700x400 mm Hor. rotation of universal table 360° Tilt left-right universal table 30° Tilt front-back universal table 30° Number of automatic feeds: infinitely variable Automatic longitudinal and cross feed range: 10-1000 mm/min Automatic vertical feed range: 10-1000 mm Rapid traverse, longitudinal and cross travel: 1500 mm/min Rapid traverse, vertical travel: 1500 mm/min Speed range: vert./hor. Spindle 50-2500 rpm Number of speeds: 18 Gbsdpsxxkn Hofx Ah Heg Main spindle motor power: 4 kW Feed motor power: 2.2 kW Hydraulic motor: 0.8 kW Lubricator motor: 0.04 kW Cooling pump: 0.04 kW Power supply: 380 V 3 Ph 50 Hz Machine dimensions: 1020 x 1640 x 1710 mm Machine weight: 2600 kg · Universal 2-sided tilting swivel table · Fixed angle table · 3-axis digital readout: Yeef GSW3 · Cooling system · 24 V work light · Vertical head with quill and spindle feed

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Gedpfxsu Dahno Ah Hobg Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: ready for operation (used), Year of construction: 2011, Feeler QMP-23A 5 Axis Vertical Machining Centre Model: QMP-23A Fanuc Series Oi-MD Control Remote Electronic Handwheels 5 Axis Trunnion Table Travels: X: 580mm (48m/min) Y: 420mm (48m/min) Z: 510mm (48m/min) Spindle Nose to Table Surface: 80 – 590mm Spindle Centre to Column Surface: 510mm Table Surface to Floor 820mm Table Centre to Column Surface: 245 – 665mm GANRO TR-150S (TRS Range) Y Axis Tilting Rotary Table 150mm Capacity YOM: 2015 *For sale with Jet Machinery Ltd* Stock No: 79001 Serial No: VKC064 Price: £24,950.00 + VAT Godpfexxbzwex Ah Hsbg Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 Godsh U Nvkjpfx Ah Hsbg MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 16,296 h, functionality: fully functional, machine/vehicle number: R9B190201, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 50 mm, bar passage: 77 mm, counter spindle speed (max.): 4,000 rpm, distance between spindles: 1,300 mm, The original price of the machine was over €500,000! Turn-mill center with 2 turrets including milling drive and 2 Y-axes! TECHNICAL DETAILS Spindle distance: 1,300 mm Y-axis travel range: ± 50 mm Main spindle (BigBore 77) Main spindle speed range: 0 - 4,000 rpm Main spindle drive power: 29 kW Main spindle mount (DIN 55026): A2-8 Gbodpfx Asx Iz U Seh Hjg Main spindle bar capacity max.: 77 mm Max. torque: 250 Nm Main spindle draw tube connection: M85 x 2 Sub spindle (BigBore 77) Sub spindle speed range: 0 - 4,000 rpm Sub spindle drive power: 29 kW Sub spindle mount (DIN 55026): KK 8 Max. torque: 250 Nm Max. chuck size: 250 mm Sub spindle draw tube connection: M85 x 2 BMT turret (upper right) Max. speed BMT turret (upper): 12,000 rpm Max. drive power BMT turret (upper): 10 kW BMT turret (lower) Max. speed BMT turret (lower): 12,000 rpm Max. drive power BMT turret (lower): 10 kW MACHINE DETAILS Operating hours: 16,296 h Power-on hours: 20,707 h EQUIPMENT Hollow clamping cylinder incl. draw tube Parts ejector Through-spindle coolant in sub spindle Sinumerik 840D-sl/OPERATE control 22" multi-touch display IPC with 240 GB SHOPTURN conversational programming USB interface Network drive / Ethernet 3D simulation 2x 12-position BMT tool turrets C-axis for main and sub spindle TRANSMIT software Chip conveyor Minimum quantity lubrication Electrical cabinet air conditioning unit Hydraulic power unit Machine light 230 V socket at control panel 5 leveling elements Documentation

Condition: ready for operation (used), Year of construction: 2011, operating hours: 52,298 h, functionality: fully functional, machine/vehicle number: 22/620, spindle speed (max.): 5,000 rpm, travel distance X-axis: 207 mm, bar passage: 65 mm, workpiece diameter (max.): 344 mm, Equipment: bar feeder, Submitting a bid obligates you to collect the item by 31/01/2026 at the latest! TECHNICAL DETAILS Maximum swing diameter: 370 mm Maximum machining diameter: 344 mm Maximum bar capacity: 65 mm Axis travel X1 Axis travel: 207 mm X2 Axis travel: 141 mm Y1 Axis travel: 100 mm Y2 Axis travel: 70 mm Z1 Axis travel: 760 mm Z2 Axis travel: 815 mm Main spindle Speed range: 5,000 rpm Main drive power (40% ED / 100%): 22 / 15 kW Spindle bore: 76 mm C-axis resolution: 0.0001 degree Gsdpfxsx Ezvks Ah Hsbg Sub spindle Speed range: 5,000 rpm Drive power (25% ED): 22 / 15 kW C-axis resolution: 0.0001 degree Turret Number of stations: 2 x 12 Tool shank height: 25 mm Boring bar holder diameter: 40 mm Driven tools Speed: 6,000 rpm Drive power: 5.5 kW MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3510 x 2810 x 2480 mm Machine weight: 12,500 kg Operating hours Total operating hours: 69,718 h Automatic cutting hours: 52,298 h Pure cutting Rev. 1: 26,775 h Pure cutting Rev. 2: 15,905 h FEATURES Bar feeder interface LNS Sprint 565 bar feeder Additional coolant nozzles on main and sub spindles Signal lamp (yellow) Hainbuch Spanntop Nova Axfix SK 65 (main spindle) Kitagawa B-208 (sub spindle) Workpiece unloading device with conveyor belt C-axis sub spindle: 0.0001 degree High-pressure coolant: 70 bar Mayfran Consep 2000 II chip conveyor, ejection to the right

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: MC-100, turning length: 350 mm, turning diameter over cross slide: 380 mm, turning diameter: 350 mm, spindle motor power: 12,000 W, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 50 mm, Hard Turning Lathe Gsdpfjvl S Dysx Ah Hjbg High precision accuracy 0.0001mm Hydrostatic technology Spindle runout 0.15μm X/Z axis positioning accuracy 1μm X/Z axis repeated positioning accuracy 0.2μm System resolution 0.01μm Quality Guaranteed

Condition: used, Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, overall weight: 14,400 kg, Mazak Integrex 300 3 ST Control -Mazatrol 640 mt pro 2 Spindles 1500mm No CE 2005/05 in very good condition Turret lathe.....10 tool ATC.....40 tool Maximum Swing 33.5″ 850.9 mm Maximum Swing (Y-axis use) 26″ – 33.5″ 660.4 mm – 850.9 mm Maximum Swing over Cross Slide 33.5″ 850.9 mm Gbjdpjx Rkvqjfx Ah Hog Maximum Swing over Lower Turret 16.5″ 419.1 mm Located in Israel under power and ready for inspect . This CNC made in Japan and definitely needs a permit of MATI

Condition: good (used), Year of construction: 2008, functionality: fully functional, There is 5 pieces for sale, (2010 - 2008 - 2004 - 2002 - 2001) All of them has C-Axis. All of them has Automatic Part Loader. All of them has Live tools of different amounts. (Please ask for exact amount) Gbjdpfx Ajx Rw Itoh Hjg We can send videos of the machines. X-Axis Travel : 245mm Y-Axis Travel : +-35mm Z-Axis Travel : 240mm Spindle Speed Range: 60-6000 1/MIN Max. Bar Diameter on Main Spindle 70mm Max. Bar Diameter on Sub Spindle 80mm Spindle inner diameter 46mm