Used Cogeneration Chp for sale (635)

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- Dsdpfx Ajl Dw U Djddjwf 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: new, empty load weight: 140 kg, maximum load weight: 610 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 1,400 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Car trailer UNITRAILER Garden Trailer 230 KIPP [with support wheel, 110 cm high tarpaulin and high bows] Transport trailer UNITRAILER Garden Trailer 230 KIPP is the latest product from UNITRAILER. It is currently our largest car trailer with a maximum permissible weight of up to 750 kg. The trailer has a folding tailgate, which enables loading and unloading in just a few minutes. By using a tiltable drawbar, it can be placed vertically on the rear wall. We will take care of all the formalities associated with the purchase for you. The trailer will be delivered to the address you specify within 5 working days together with the registration documents. Once you have received the trailer, you only need to register and insure it to be able to use it in full. Height of the side walls: 30 cm Height of the tarpaulin: 110 cm Total height of the loading area: 140 cm Advantages of the Garden Trailer 230 KIPP car trailer If you decide to buy our new car trailer, you will receive a 2-year warranty so that you can use it without worrying about damage. Each product is sent with a user manual and a warranty booklet. All important documents will be sent to you together with the purchased Garden Trailer 230 KIPP. Furthermore, you always have the option of purchasing additional equipment in the form of a jockey wheel or anti-theft device or additional drop sides. If you have any questions or problems when using the trailer, you can contact our advisors at any time. They will be happy to provide you with all the information you need and explain everything to you. Our car trailer can also be used thanks to its tiltable drawbar. This makes it much easier to load and unload goods that you would normally have to lift or put down. This solution is also most often found in much more expensive trailers, which significantly affects the better feeling of using them. Another advantage of this solution is the ability to hold the trailer vertically with the drawbar folded in and resting on the rear dropside. So you don't have to worry about the trailer taking up a lot of space in the garage or not fitting because of the protruding drawbar. You can even put it on the front of the building or anywhere! Dwsdpfx Adet Iv Abedjf

Condition: excellent (used), working width: 250 mm, planing height: 140 mm, spindle diameter: 50 mm, planing width: 250 mm, working height: 140 mm, power of feed motor: 30,000 W, spindle speed (max.): 6,000 rpm, height adjustment type: hydraulic, type of input current: three-phase, number of spindles: 9, input frequency: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 30 kW / 6 - 100 m/min, Spindle arrangement: 1-bottom (11 kW) - with hydraulic clamping 2-Right (9 kW) 3-left (11 kW) 4-Right (9 kW) 5-Top (15 kW)- with hydraulic clamping 6-Bottom (7.5 kW) - with hydraulic clamping 7-Top (7.5 kW) - with hydraulic clamping and straight jointer 8-Top (11 kW) - with hydraulic clamping and straight jointer Dodjq Au Tlspfx Addswf 9-bottom (11 kW) - with hydraulic clamping and straight jointer 11 driven rollers in the table

Condition: excellent (used), Year of construction: 2011, functionality: unexamined, overall weight: 2,500 kg, total length: 4,500 mm, total width: 2,000 mm, total height: 350 mm, 2 x white sandwich panel 350 x 2000 x 4500 mm with hydraulically extendable wheels, design type 5 Dwedpfowxwcmjx Addef

Condition: excellent (used), two bottom heads one side - right head heads with 21 spindles spindles span 32mm motors 3x1,1kW 2 pneumatic pressure regulation of span between heads right/left spindles Dwsdpfx Adow Ad Tgedjf

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: T1-507510.RR TAP1, center height: 180 mm, 4th and 5th axis - with automatic spindle clamping, pneumatic connection only - with compact support bearing (unclamped) Dwjdpfexbb Nysx Addsf - fully sealed IP67 - Sensors with LEDs, data logger, and microprocessor, e.g., for - Condition monitoring and display - Service indicator - Data history for root cause analysis - Remote diagnostics - Axis signals 'Limit+ / Limit-' (e.g., for rotary axis) - Data output via USB slot (Currently mounted on a Haas VF2SSYT and ready for operation) (Includes Lang Quickpoint, without the pictured Lang vise accessories)

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved Dwedpfx Aoib Dadeddsf for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Condition: new, empty load weight: 140 kg, maximum load weight: 610 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 1,100 mm, operation weight: 750 kg, Car trailer UNITRAILER Garden Trailer 230 KIPP [with support wheel, blue high tarpaulin and high bows] Dwsdpst Iv Dlofx Addjf Transport trailer UNITRAILER Garden Trailer 230 KIPP is the latest product from UNITRAILER. It is currently our largest car trailer with a maximum permissible weight of up to 750 kg. The trailer has a folding tailgate, which enables loading and unloading in just a few minutes. By using a tiltable drawbar, it can be placed vertically on the rear wall. We will take care of all the formalities associated with the purchase for you. The trailer will be delivered to the address you specify within 5 working days together with the registration documents. Once you have received the trailer, you only need to register and insure it to be able to use it in full. If you decide to buy our new car trailer, you will receive a 2-year warranty so that you can use it without worrying about damage. Each product is sent with a user manual and a warranty booklet. All important documents will be sent to you together with the purchased Garden Trailer 230 KIPP. Furthermore, you always have the option of purchasing additional equipment in the form of a jockey wheel or anti-theft device or additional drop sides. If you have any questions or problems when using the trailer, you can contact our advisors at any time. They will be happy to provide you with all the information you need and explain everything to you. Our car trailer can also be used thanks to its tiltable drawbar. This makes it much easier to load and unload goods that you would normally have to lift or put down. This solution is also most often found in much more expensive trailers, which significantly affects the better feeling of using them. Another advantage of this solution is the ability to hold the trailer vertically with the drawbar folded in and resting on the rear dropside. So you don't have to worry about the trailer taking up a lot of space in the garage or not fitting because of the protruding drawbar. You can even put it on the front of the building or anywhere!

Condition: used, functionality: unexamined, Year of construction: 2009, LSV1169 Complete Package: GFU HP200 Upset Press - Used Upset Press GFU HP200 Year of manufacture: 2009 Operating hours: approx. 23,000 h (as of 05/2024) Machine decommissioned: 23 May 2024 Original purchase price: €52,360.00 Accessories included: - Tool lubrication - Extraction system - Hydraulic unit - Induction - Central lubrication - Specific tools for WK2-WK20 Spare parts included: - Spindle - Transformer - Block cylinder - Complete cylinder - Cylinder bearing - Various bushings Location: The machine is still installed in a production facility at 98596 Brotterode-Trusetal, Thuringia and must be dismantled and collected by the buyer. Machine weight: approx. 8 tonnes The sale is for the complete package. Dodpsw Uv Ifofx Addewf Machine inspections on site are possible by appointment. The machine is currently out of operation and in storage. More photos available on request. We are open to price proposals. Reasonable counter-offers will be considered. Please include your full contact details with all enquiries! Feel free to visit and inspect the offer on site – just call us to arrange an appointment. This item originates from insolvency proceedings and therefore shows signs of use. Maintenance and professional cleaning are the responsibility of the buyer. The sale is made without any warranty or guarantee. Liability, reduction, or rescission are expressly excluded. Pre-inspection is strongly recommended, as the item is sold as seen. All information provided is without guarantee. Subject to errors and change. The object is sold as viewed on site, in used condition, subject to retention of title and exclusion of any guarantee for visible or hidden defects, in particular regarding technical condition, quality, performance, or usability. Due to time constraints, only serious enquiries and price offers will be answered! This is strictly an advertisement for informational purposes only. Viewing strictly by appointment! Best regards

Condition: good (used), Year of construction: 2011, Vibratory feeder for sale, price is for one unit Dwedpowydkgjfx Addjf

Year of construction: 2024, condition: new, Manufacturer of Drumscreen. We can build all of drumscreens, All models available on the market. Many in stock ! Doppstadt - SM518 - SM618 - SM620 - SM720 - and other models Farwick Komptech - PRIMUS - MAXX - MUSTANG - NEMUS - CRIBUS Eggersmann Terra Select - T4 - T5 - T6 - T7 PRONAR - MPB 18.47 - MPB 20.55 - MPB 20.72 Djdpfx Aethl T Uoddowf Any mesh size square 10x10 15x15 20x20 30x30 40x40 50x50 60x60 70x70 80x80... round diameter 10 20 30 40 50 60 70 80 mm... hexagon 10mm 20mm 30mm 40mm 50mm 60mm 70mm 80mm Drums made of special steel!

Condition: used, Wire feed rollers for MIG / MAG hose package, feed motor for inert gas welding device, inert gas device Dwsdpfx Adjcgan Isdjf -with: Euro plug-in coupling -Number: 4x wire feed rollers available -Price: per piece -for a surcharge: gear motor, electric motor, direct current motor are also available -Dimensions: 285/90/H180 mm -Weight: 2.5 kg

Condition: new, Brinkmann TS 21/300-MV+211 submersible pump SN:0412003832-92658001 ,unused, 100% functional, scope of delivery as per photos Dwedpfsur A Uxex Addof

Year of construction: 2022, condition: new, Manufacturer of Drumscreen. We can build all of drumscreens, All models available on the market. Many in stock ! Doppstadt - SM518 - SM618 - SM620 - SM720 - and other models Farwick Komptech - PRIMUS - MAXX - MUSTANG - NEMUS - CRIBUS Dwodpjd Tgzdefx Addjf Eggersmann Terra Select - T4 - T5 - T6 - T7 PRONAR - MPB 18.47 - MPB 20.55 - MPB 20.72

Condition: used, Electrician workbench ESD workplace -Dimensions: 1500/750/780 mm -Conductive table top with Anka-Plast covering -for workplaces where electrostatically sensitive components and assemblies are processed. Dwodpfx Adjb A Hk Uedef -Discharge resistance: according to DIN 51953

Condition: ready for operation (used), Schmalenberger TH17-32-08/2 50Hz multi-stage submersible pump SN:2014010905/10, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dwsdpfour Dbmox Addef

Condition: used, Power supply unit, converter, power supply, switching power supply, fire protection control -Manufacturer: Ströbich, protronic -Product: control panel for power supply fire protection control RZ7 NT24-BMZ2 Dsdofmm A Iopfx Addowf -Dimensions: 180/130/H2 mm -Weight: 0.1 kg

Condition: ready for operation (used), Grundfos SPK8-5/3 A-W-A-AUUV exchange pump D3HNH0403P31126 SN: MK116551 with MG71B2-14FT85-C pump motor No. 85805103,used, good condition, 100% functional, scope of delivery according to photos Dwodpfx Ajmq H R Sjddsf

Condition: used, machine/vehicle number: 12469, Hydraulic press, two-column press, oil hydraulic press -Press force ram: 65 to -Hydraulic unit: max. 330 bar -Clamping table: 440 x 250 mm -Max. Insertion height: 295 mm -Max. Width: 300 mm -Max. Stroke: 220 mm -with safety cage Dodpfx Aob I Dqaoddswf -Max. Feed speed: 3 mm/sec -Retraction speed: 6 mm/sec -Dimensions: 1680/500/H2300 mm -Weight: 980 kg

Condition: ready for operation (used), Schroff 31006-403 Switchpac 30W, used, normal signs of use, 100% functional, scope of delivery as per photos Dwodpfx Adsi Ec Ifjdef

Condition: used, 2 component gun, multi-function gun, cartridge gun, cartridge press, double cartridge dosing gun, 2K mixing gun -Manufacturer: Plunger, double cartridge dispensing gun Mixpac Strap Kit -Number: 2x cartridge gun available Dwjdpfou Aigkex Addsf -Price: per piece -Dimensions: 300/210/H85 mm -Weight: 1.2 kg

Condition: ready for operation (used), Grundfoss MTR5-32 / 32 A-W-I-HUUV submersible pump Model: A96518681P2 0506, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dodpfx Adsi D Ibcsdowf

Condition: ready for operation (used), Schneider Electric XBTGT5330 10.4" Color Touch Panel SN:085960E0240371, the article was only used for test purposes, new condition, 100% functional, scope of delivery as per photos Dwsdpepf Ar Rofx Addsf

Condition: ready for operation (used), Grundfos MTR15-9 / 2 A-W-I-HOOK submersible pump Model: A99371564P31750 SN:0001,used, normal traces of use, 100% functional, scope of delivery according to photos Dwsdpolmtawjfx Addef

Condition: new, Schneider Electric XBTGT5330 10.4" Color Touch Panel TFT / Magelis Advanced Panel SN:085960E025714, unused in opened original packaging, 100% functional, scope of delivery as per photos Dwsdpfx Adspf Atcjdjf