Used Cogeneration Chp for sale (630)

Condition: ready for operation (used), Brinkmann TC 260 / 460 MV + 210 submersible pump 250 L / min No. 003, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Djdpfxei D Hmwe Addola

Condition: ready for operation (used), Year of construction: 2006, A blank turner for sheet metal blanks is available. Max. Blank dimensions X/Y: 1600mm/1100mm, max. blank stack height: 190mm, max. stack weight: 1500kg, max. stack inclination: 15°, cycle time with pallets: approx. 30s, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2500mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible. Dodpfev I Dcgex Addsla

Year of construction: 2025, condition: new, Screening drums suitable for all common screening machines such as Doppstadt SM 314/ SM414 / SM518 / SM618 / SM620 / SM720 / SM 725 Terra Select T4-T7, Komptech Maxx, Mustang, Nemus , Cribus , Pronar , Terex Neuenhauser and others - Manufactured according to your specifications: - Perforation (also variable within the drum) - Square or round perforation - offset or straight - Smallest webs - Welded-in helix - in various material thicknesses - Sharp-edged perforated sheets of the highest quality - Perforated sheets made of special steel Dljdpfx Asw Ebb Heddja We deliver our drums free of charge. Many models in stock with no waiting time.

Condition: used, Year of construction: 2014, operating hours: 10,000 h, functionality: fully functional, Extraction table from Pötter with connected extraction by Ruwac (Ex protection) Dedpfx Aewy Rursddjla

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1500 (maximum part processing length 1500 mm), with 1 PES/3 polishing station and a control cabinet. Dlsdpfx Asw Au A Ejddja The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: new, mileage: 50 km, power: 162 kW (220.26 HP), overall weight: 11,900 kg, fuel type: diesel, color: white, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space width: 2,500 mm, loading space length: 5,900 mm, loading space height: 2,700 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, Engine: MAN D0834 LFLAH 162 KW Automatic transmission MAN TipMatic 06.10 OD MAN Idle Speed Driving MAN TipMatic Efficiency MAN Easy Start Start MAN Tronic on-board computer MAN BrakeMatic MAN EBA emergency brake assistant Multifunction display Cruise control Lane keeping assistant Air conditioning Central locking EDC, ASR, ESP Emergency Brake Assist 2 ECAS Tank 180L AdBlue 35L Wheelbase 4200 mm Tachograph DSRC TollCollect preparation Lane Guard IV system RIO Box Connectivity System Bluetooth AUX/USB CB radio Radio MAN Media Truck with color display Air-suspended suspension seat Air suspension on the rear axle Daytime running lights Empty weight: 6475 KG Djdpfxevm N Ulo Addela Payload: 5425 KG Premium body: Box with Tail lift Side door lockable Tail lift 1500 KG dHollandia Internal dimensions in mm L/W/H 5900/2500/2700 14 pallet spaces Tool box 60L Roof spoiler Didn't find the right vehicle? Configure your own vehicle! Whether equipment, body or engine variant. Everything at a fair price! You can also buy just the bodies for your existing vehicle from us! Don't hesitate to contact us! * Pictures may show special equipment that is not included in the basic price. * ---- *The information provided on the Internet is non-binding descriptions. It does not represent guaranteed properties. The seller is not liable for tips and data transmission errors / changes / input errors. Please check the accuracy of the equipment features directly on the vehicle before purchasing. Errors / subject to prior sale. This advertisement is to be understood as an invitation to submit an offer.

Condition: ready for operation (used), Grundfos SPK2-15 / 8X A-W-A-CVUV submersible pump SN:64812211001 with MG71A2-14FT85-B motor, used, normal signs of use, 100% functional, scope of delivery as per photos Dsdpfelcf Nzsx Addjla

Condition: good (used), Year of construction: 1997, Ref. no.: 18142 Hersteller: DEMAG Type: Ergotech pro 50-270 Year of construction: 1997 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Distance between tie bars: 355 x 355 mm Mould height min.: 210 mm Dlsdpfxewm Iz Ae Addea Platen size (h x v): 540 x 540 mm Injection unit Screw diameter: 35 mm Injection volume: 106 cm³ Shot weight: 95 g Injection pressure: 2573 bar Measurements and weight Dimensions: 3,65 x 1,15 x 1,18 m Machine weight: 3600-2500 kg

Condition: new, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 3225716, Touch panel and PC for Weber extruder, new and unused Manufacturer: RMA Maschinenautomation GmbH Type: Touch Panel PC PSQ - ET PC-115-PSQ Year of manufacture: 2017 Serial no.: 3225716 Dlodjvmm Ayspfx Addoa Dimensions: appr. 400 x 310 x 80 mm, (WxHxD), incl. Front panel Weight: appr. 5.5 kg The touch panel including PC was purchased in 2017 from Weber - Kronach as a spare part. After that, the touch panel incl. PC was no longer used.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Djdpfxsv Ivn Ue Addela Weight approx. 480 kg + 130 kg lighting module

Condition: used, color: other, Year of construction: 2013, Winch parts of an HMF 6020 with Jib = More information = Year of manufacture: Jan 2013 = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U Dljdow D Dflepfx Addsa - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: new, Product description: The EPS 80 Touch automatic length gauging system, which can be easily mounted on a new or existing machine tool. With this system, products of different materials and various lengths can be measured easily, quickly and accurately. EPS 80 Touch is a length gauging system which is widely used in the wood, plastic, aluminum and light steel industry. The system is very easy to operate and accepts entries in millimeters and/or tenths of a millimeter. It can be set up to the left or right of the machine tool. The system is available from 1 meter and is expandable to 14 meters. Specifications of the EPS 80 Touch: Speed : up to 40 meters/min. Holding force : 1800N Accuracy : +/- 0,25 mm Voltage : 230V, control current 24V Buttons : Start, Stop, reference, measuring tongue on/off, parameter button Displays : actual value, set value Dsdpfotd Tndjx Addola Emergency stop : this button immediately stops the EPS 80 Touch Display : touch screen with large displays and clear key layout Attachment : very easy to turn on and off for short stretches Software : fully proprietary, kept up-to-date in-house Components : industrial components and maintenance free Cables : cables including chain conveyor are supplied up to a maximum of 14 meters. Our ads are compiled with the utmost care, type and specification errors reserved.

Condition: ready for operation (used), Brinkmann TC 25 / 810 + 001 submersible pump 10 L / min No. - 002, used, slight signs of wear, 100% functional, scope of delivery as per photos Dsdpfx Adoi D Hmdedola

Condition: used, COMPLETE ILKWANG SANDWICH PANEL LINE TECHNICAL DATA Dlsdpfxsw Aht Ro Addja Line capacity: 400 m2/h Panel length: 2.000 mm - 15.500 mm Panel thickness: 50-75-100-125 mm SCOPE OF SUPPLY Top roll forming line - Coil loading table & Single expandable mandrel Uncoiler - 12-step roll forming line - 12m strip support & guiding unit - Steel structure frame for supporting all above equipment Bottom roll forming line - Coil car - Single expandable mandrel uncoiler - Protecting film application - 22-step roll forming line Pre-heating electric furnace Foaming unit type PUR - PIR 20m double belt conveyor Automatic spacer feeding system Flying saw: bandsawing unit with dust exhaust system Cooling / Exit roll conveyor Rotating cooling system Automatic panel stacking system Orbital wrapping line Complete hydraulics, pneumatics & electric system Existing tanks for chemical Documentation Existing tooling and spares Line capacity: 400 m2/h Panel thickness: 50-75-100-125 mm Panel length: 2.000 - 15.500 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 19,000 h, Munch Pellet Mill with 2 only 200 hp motors (total 400 hp) electric controls and 60 hp centrifugal cooling fan also second 2011 model 650 pellet mill and 2 skids of new rolls and dies and spare parts. Second mill 2011 has no motors. It is working machine ready for use in case 2012 machine had problem. Dljdexc Nt Njpfx Addea

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module Dljdjv Ivn Iopfx Addoa

Condition: ready for operation (used), Grundfoss MTR15-29 /7 A-W-I-HOOV submersible pump Model: A9+6574235P10510 SN:0001, used, normal signs of use, 100% functional, scope of delivery as per photos Dledpfx Aji D Ia Usddsa

Condition: used, SANDWICH PANEL LINE FOR DOORS AND WALLS : 610mm width Made by METECO This sandwich panel production line is designed to manufacture doors & walls panels up to 610mm with an annual capacity of 1.500.000 m panel/year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1.500.000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz SCOPE OF SUPPLY 1. Upper sheet metal treatment section - 10 T upper unwinder with coil carriage - Pinch-Roll and roller passage - Upper reel steel frame - Polyethylene film applicator - Embossing machine for texture pattern - Press for decoration pattern - Profiling machine with upper rollers (12 stands) - Steel upper frame for profiling machine - Upper sheet guide 2. Lower sheet treatment section - Lower 10 T double unwinder with reel carriage - Polyethylene film applicator - Corona treatment machine - Embossing machine - Lower roller forming machine (12 stands) - Rollway - Operator desk for entry line 3. Panel forming section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foaming portal - Foaming booth - Side sealing system and tape applicator - Double press conveyor - Double belt heating system - Double belt press - Outfeed roller conveyor - Sawing machine for cutting - Soundproof cabin - Dust extraction unit - Operator Control desk 4. Stackable section - Automatic panel tilter - Stackable conveyor - Extraction conveyor - Packaging section - Styrofoam spacer feeding system - Infeed conveyor - Packaging machine - Extraction conveyor - Wrapping machine 5. Panel production equipment - Top roller forming tools - Bottom roll forming tools 6. List of additional machines - Container station for polyol, isocyanate and additives Dljdpfxsvtpcis Addja - Pentane tank and accessories Width: 500 - 610 mm Thickness: 40 - 80 mm Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1.500.000 m panel/year

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Dsdpfx Adjv Ivnzjdsla Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: good (used), functionality: fully functional, KUKA AG KCP2 Teach Pendant Control Panel, Version 0 / L=8.5 m, 00 130 547, 00 130 180 Model: 00130547 Type: 00130180 Condition: Used Dlsdpfxjxpu U So Addea Technical data: 24V DC 0.5A

Condition: used, Pneumatische Buchpresse - pneumatic Book Press Kokkelink BP 40 1 Pressplatte  / 1 Press Palte Pressfläche / Press Size max. 400 x 400mm Presshöhe / Press high max. 350mm Presshöhe stufenlos regelbar / Press high steppless adjustable Gewicht / Weight 250kg Dlsdpfov D Rgkox Addsa Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2007, load capacity: 200 kg, arm reach: 2,400 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots are the obvious choice for a wide range of applications – e.g. handling or spot welding. Dljdpfxjw H A A Is Addoa Model: KR200 COMP Payload: 200 kg Reach in mm : 2400 mm Condition: Used & Tested Year: 2007 (Multiple options available) Included: Manipulator + KRC2 ed05 Cabinet + Teachpendant + All Wire Sets Shipment expenses are not included in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.We also offer custom engineering services and design for your specific production needs. (Source: Kuka's Website)

Condition: used, Year of construction: 2023, load capacity: 7,000 kg, lifting height: 34,700 mm, fork length: 1,200 mm, total length: 10,300 mm, - Lenkart: 2-rad Lenkung, 4-rad Lenkung, Krebsgang - Stützentyp: Dreifach-Teleskop - Steuerung mit Stützen: Stützenbefehle einzeln oder gleichzeitig - Motornorm: Stage V / Stufe 4 - Nennleistung Verbrennungsmotor / Leistung (kW) 211 Hp / 155 kW - Max. Drehmoment / Engine rotation (min) 805 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie 2 x 12 V - Battery capacity 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with CVT - Getriebe Speedshift - Max. travel speed 40 km/h - Zugkraft 9300 daN - Parkbremse Automatische negative Parkbremse - Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen: 29 % / 38.70 % - Pumpenart: Verstellpumpe - Hydraulikfördermenge: 185 l/min - Hydraulikdruck: 350 bar - Motoröl: 13 l - Hydrauliköl: 300 l - Fassungsvermögen des Kraftstofftanks: 320 l - Abgasnachbehandlung für Diesel (AdBlue®): 24 l - Geräuschpegel im Fahrerstand (LpA): 68 dB Dlodpsx Edw Usfx Addsa - Außenschallpegel (LwA): 109 dB - Vibrationswert an Händen/Armen: < 2.50 m/s² - Lenkräder (vorne / hinten): 2 / 2 - Steuerungen: 2 Joysticks - Sicherheit Zulassung der Kabine: Kabine ROPS - FOPS Stufe 2 - Anbaugeräte Erkennungssystem (E-Reco): Standard

Condition: ready for operation (used), Year of construction: 2018, operating hours: 752 h, General Data Measurements width 1340 mm Measurements depth 1900 mm Measurements height 2380 mm Machine weight 3300 kg Main Drive Pressing force 360 kN Bending length 1020 mm Stroke 120 mm Movement Y-Axis Rapid Traverse 25 mm/s This TRUMPF TruBend 7036 press brake was manufactured in 2018. It features a press force of 360 kN and a bending length of 1020 mm. The machine includes a Touchpoint TruBend operating interface and offers a maximum stroke of 120 mm. Dimensions are 1900 mm in length, 1340 mm in width, and 2380 mm in height, weighing 2600 kg. If you are looking to get high quality bending capabilities consider the TRUMPF TruBend 7036 machine we have for tact us for more information. Dlodpsx D Elqjfx Addja Application Types Bending

Condition: excellent (used), Year of construction: 2006, load capacity: 200 kg, arm reach: 2,600 mm, controller manufacturer: KUKA, controller model: KRC2, Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots are the obvious choice for a wide range of applications – e.g. handling or spot welding. Model: KR200 COMP Payload: 200 kg Reach: 2400 mm Condition: Used & Tested Year: 2006 (Multiple options available) Dedpfxjw Hrtcs Addola Included: Manipulator + KRC2 Cabinet + Teachpendant + All Wire Sets Shipment expenses are not included in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.We also offer custom engineering services and design for your specific production needs. (Source: Kuka's Website)