Used Wollmer Chp for sale (194)

Year of construction: 2025, condition: new, functionality: fully functional, Complete - New MWM and CAT GAS generator set, CHP as option, Generator 10500V/50Hz. Bledpfsv Uag Iox Agkod

Condition: excellent (used), Year of construction: 2013, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, Cutting machine CEVISA - CHP-12 MACH-ID 9404 Make: CEVISA Type: CHP-12 Year: 2013 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm X Bevel K Bevel V Bevel Y Bevel Bjdpfxsyi Txks Agkold High average cutters lifespan around 1000 M Self feed Zero maintenace Min. Beveling angle: 22.5° Max. beveling angle: 45° Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2020, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, sheet thickness (max.): 40 mm, Cutting machine CEVISA - CHP-12 MACH-ID 9406 Make: CEVISA Type: CHP-12 Year: 2020 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm Bljdpfx Aeyh U Ubogked   X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Self feed Zero maintenace Min. Beveling angle: 22.5° Max. beveling angle: 45° Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 20, controller model: GE FANUC 15-MB / 4 axis, spindle speed (max.): 12,000 rpm, number of axes: 4, TECHNICAL DETAILS Number of axes: 4 Number of pallets: 7 Pallet size: 320 x 320 mm Number of tools: 96 Tool holder: ISO 40 Max. spindle speed: 12,000 rpm MACHINE DETAILS Bjdpfeyhnc Uex Agksld Control: GE FANUC 15-MB / 4 axis Connection: 50 Hz 3x 380 V EQUIPMENT Coolant system Through-spindle coolant (IKZ) Tool breakage monitoring Chip conveyor Spindle cooling

Condition: used, Year of construction: 2012, operating hours: 1,01,000 h, functionality: fully functional, machine/vehicle number: MAN E 0836 E 312, fuel type: gas, power: 48 kW (65.26 HP), output voltage: 400 V, output frequency: 50 Hz, Used BIOGAS CHP unit with protective cover. A cylinder head service was performed in 2023 at 81,000 operating hours. Bsdpfewmld Uox Agkold

Condition: ready for operation (used), Year of construction: 2018, operating hours: 60,000 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, power: 3,028 kW (4,116.93 HP), empty load weight: 10,000 kg, fuel: domestic gas H, control cabinet height: 2,000 mm, control cabinet length: 600 mm, control cabinet width: 800 mm, nominal power: 2,679 kW (3,642.42 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, GE Jenbacher JMS 616GS-N.L Gas CHP Unit Fuel Type: Natural Gas Electrical Output: 3,065 kW Thermal Output: 2,420 kW Total Efficiency: 85.6% Electrical Efficiency: 42.9% Thermal Efficiency: 42.7% Voltage: 690 V Frequency: 50 Hz RPM: 1,500 Engine Configuration: V16 (60° angle) Bljdpfxjwptfro Agkjd Bore x Stroke: 190 mm × 220 mm Displacement: 99.8 L Fuel Consumption: Approx. 597 Nm³/h (at LHV 9.5 kWh/Nm³) Noise Level: 101 dB(A) at 1 metre Dry Engine Weight: approx. 10,000 kg Dimensions (L×W×H): 8,300 × 2,200 × 2,800 mm ⚙️ Included Equipment Turbocharged engine with intercooler STAMFORD LVSI 804 W alternator (rated 3,555 kVA) LEANOX control system Electronic ignition system Full lubrication system (pump +filters) Heat exchangers for coolant and oil Control panel with visual interface Pre-heating system Gas train according to DIN-DVGW standards

Condition: used, (14) Unused Man UPB 12-L-W-E3262E302 CHP cogeneration units with capacity 130kWel and 226 kWTh made in 2022 and designed to be fed by wood gas. Project was dropped so the equipment was never installed or commissioned. Plant includes the following major equipment: - Man 12 cylinder engine rated 273 kW, 50Hz, 1500 RPM - Marelli MBX-E 250 MA4 generator rated 169 kVA, 400V, 50Hz, 1500 RPM - AFR Air-Fuel Ratio control system by Motortech - Generator control system by ComAp Bljdpsyhc T Iefx Agkod (14) units available.

Condition: excellent (used), Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, Bosch CHP Complete System (1 Set) – CHP CE 140 N (Year 2016) including Cabero Heat Exchanger/Dry Cooler (Year 2017) For sale is 1 complete, homogenous CHP unit consisting of 1× Bosch CHP Module CE 140 N (gas-powered CHP) including the corresponding peripherals as well as 1× Cabero heat exchanger/dry cooler. The unit is operational and in very good condition. Sale only as a complete package. Bodsycl Abopfx Agksld 1) CHP / CHP Module Manufacturer: Bosch KWK Systeme GmbH Model: CHP CE 140 N Year of manufacture: 2016 Engine: MAN 2867 E 218 (gas-powered Otto engine) Performance data (CE 140 NA / typical as per datasheet series): Electrical output (nominal, 90/70°C): 70 – 140 kWel Thermal output (nominal, 90/70°C): 106 – 212 kWth Gas input: 192 – 384 kW Modulation range: 50 – 100 % Net efficiency: electrical 36.5 %, thermal 55.2 %, total 91.7 % Power supply: 400 V / 50 Hz, 3-phase Own energy consumption (electrical): 2,500 W Max. operating pressure (heating circuit): 6 bar Acoustics / emissions (CE series): Module noise level: 71 dB(A) NOx (dry, 5% O₂): ≤ 0.250 g/Nm³ CO (dry, 5% O₂): ≤ 0.300 g/Nm³ Dimensions (CE 140 NA – indicative values): Width W ≈ 1,160 mm Length L ≈ 3,850 mm Required room height min. ≈ 2,900 mm Wall clearance A > 900 mm 2) Cabero Heat Exchanger / Dry Cooler (1 unit) Manufacturer: Cabero Designation / Item No.: GCDD099MB-2X7-64-S D (EB) EC AXI A Version / Standard: PED / DIN EN 14276-2:2011 Year of manufacture: 2017 Heating surface: 2,742.65 m² Medium: Ethylene glycol 34% / Water 66% Fluid Group: 2 Max. allowable pressure (PS): 12 bar Test pressure (PT): 17.16 bar Permitted temperature range (TS): −40 / +60 °C Volume: 439.5 L Pressure test date: 03./04.07.2017

Condition: excellent (used), Year of construction: 1994, VOLLMER CHP 025 with Hollow face teeth and cheap breaker teeth device Bodpfxsx Rrilj Agksld

Condition: new, Year of construction: 2025, pressing force: 2,500 t, table width: 1,800 mm, table length: 2,600 mm, stroke length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 2500 H-Type Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type hydraulic presses are engineered for heavy-duty forming, deep drawing, and spinning applications that require extremely high tonnage. With its 8-guided H-frame construction, the press provides maximum rigidity during operation; parallelism and perpendicularity tolerances are reliably maintained throughout the full stroke length. The CHP 2500 model, featuring large bolster dimensions, a multi-cylinder main pressing structure, and a high-capacity hydraulic system, is specifically designed for the automotive, heavy industry, defense, and high-tonnage tooling sectors. The frame structure is stress-relieved by vibration to ensure durability and reliable long-term operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Stress-relieved frame via vibration method - Bronze Zr14 slide bearings - Welding applications certified by WPQR and WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and production in accordance with CE standards - PLC-controlled hydraulic system - 7” touchscreen panel (DELTA) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 2500 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 2500 tons Moving Bolster Size: 1800 × 2600 mm Fixed Bolster Size: 1800 × 2600 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Weld Stress Relief: Vibration method Welding Certification: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1/2017) Max. Operating Pressure: 250 bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Moving Bolster Fast Descent Speed: 150 mm/s Moving Bolster Drawing Speed: 12 mm/s Moving Bolster Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø565 mm – Ck45 (4 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6,500 mm Approx. Press Width: 3,950 mm Approx. Press Depth: 2,600 mm Lower Table Height from Floor: 1,500 mm Primary Filling Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Displacement Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 120 tons Production Note Bsdpfx Aex N T S Eogksld This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 2,000 t, table width: 1,500 mm, table length: 2,500 mm, stroke length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 2000 H-Type Hydraulic Press – 8-Guided Slide General Description The CRONOSSTECH CHP series H-type hydraulic presses are designed for heavy forming, deep drawing, spinning, and die applications requiring very high tonnage. The rigid H-frame structure with 8 guiding slides ensures maximum rigidity during pressing operations and maintains parallelism and perpendicularity tolerances throughout the full stroke. The CHP 2000 model, featuring large table dimensions, a high-capacity hydraulic system, and a powerful motor, offers a reliable and durable solution for the automotive, defense, heavy industry sectors, and high-tonnage production lines. The frame is stress-relieved via vibration to ensure stable operation. ⚙️ Standard Equipment - Steel construction, H-frame body with 8 guided slides - Vibration stress-relieved body structure - Bronze Zr14 slide bearings - TÜRK-AK accredited WPQR and WPS certified welding procedures (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch screen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 2000 - Type: Steel construction, H-frame body with 8 guided slides - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 2000 Tons Bodpfx Asx N T Srsgkjld - Moving Table Size: 1500 × 2500 mm - Fixed Table Size: 1500 × 2500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Min. Daylight: 200 mm - Max. Daylight: 1200 mm - Weld Stress-Relief: Vibration stress-relieved - Welding Application: WPQR and WPS certified by TÜRK-AK, according to EN ISO 15614-1/2017 - Max. Working Pressure: 250 Bar - Total Motor Power: 180 kW – IE3 - Main Pump: 140 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Inner Diameter: Ø720 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units - Approx. Height of Press: 6300 mm - Approx. Width of Press: 3850 mm - Approx. Depth of Press: 2500 mm - Lower Table Height from Floor: 1500 mm - Main Fill Valve: NG 200 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Distance Transducer: NOVATECHNIK or TURCK - PLC System: DELTA - Touch Panel Display: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 95 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 1,500 t, table width: 1,500 mm, table length: 2,400 mm, stroke length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 1500 H-Type Hydraulic Deep Drawing Press – 8 Guides General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are engineered for deep drawing, forming, and heavy-duty shaping applications that require high tonnage. The 8-guide H-frame structure delivers maximum rigidity and stability during pressing operations, ensuring parallelism and perpendicularity tolerances are maintained. The CHP 1500 model, equipped with a large bolster, robust hydraulic system, and high stroke capacity, provides a reliable solution for sectors such as automotive, defense, heavy metal forming, and industrial production lines. The frame is stress-relieved by vibration, guaranteeing long-lasting and stable operation. ⚙️ Standard Equipment • Steel construction, 8-guide H-frame press structure • Vibration stress-relieved main frame • Bronze Zr14 slide bearings • WPQR and WPS welding applications approved by TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing in compliance with CE standards • PLC-controlled hydraulic system • Touch screen panel (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Cooling system • Off-line filtration • Operator safety protection systems • SIEMENS/SCHNEIDER electrical components 📐 Technical Specifications – CHP 1500 Type: Steel construction, 8-guide H-frame press Frame Material: St52 – ERDEMIR Slide Bearings: Bronze Zr14 Capacity (Ram): 1500 Ton Moving Bolster Size: 1500 × 2400 mm Fixed Bolster Size: 1500 × 2400 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Bljdpfx Ajx N T R Uegked Min. Daylight: 200 mm Max. Daylight: 1200 mm Stress Relief: Vibration stress-relief Welding: WPQR and WPS certified by TURK-AK, EN ISO 15614-1/2017 Max. Working Pressure: 250 Bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø620 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approximate Height: 6250 mm Approximate Width: 3750 mm Approximate Depth: 2500 mm Lower Table Height from Floor: 1500 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 70 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 1,200 t, table width: 1,500 mm, table length: 2,000 mm, stroke length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are specifically designed for deep drawing, flow forming, shaping, and heavy-duty pressing operations. Thanks to its eight-slide H-frame construction, it provides maximum rigidity, stability, and precision under high tonnage. The CHP 1200 model offers reliable and long-lasting performance for industrial production lines requiring high force. The frame structure is stress-relieved via vibration, ensuring that loads generated during pressing are distributed evenly to maintain parallelism and squareness tolerances. ⚙️ Standard Equipment - Steel construction, 8-slide H-frame press design - Vibration-relieved stress body structure - Bronze Zr14 slide bearings - WPQR and WPS welding applications certified by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards Bledpsx N T Rujfx Agksd - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1200 Type: Steel construction, 8-slide H-frame press design Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 1200 tons Movable Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Squareness Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: Vibro-stress-relieved Welding Application: WPQR and WPS applications certified by TÜRK-AK in accordance with EN ISO 15614-1/2017 Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cc – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø560 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6100 mm Approx. Press Width: 3550 mm Approx. Press Depth: 2400 mm Lower Table Height From Ground: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 60 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 1,000 t, table width: 1,500 mm, table length: 2,000 mm, stroke length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 1000 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications requiring high tonnage. The 8-guided H-frame structure distributes the high forces generated during pressing evenly, ensuring maximum rigidity, precision, and long service life. The CHP 1000 model has been developed to deliver reliable and stable performance for heavy industry production lines. CHP Series – Structural Features CHP series presses are engineered with heavy-duty industrial conditions in mind. The frame and main carrier constructions are stress-relieved by vibration. Thanks to bronze Zr14 slide bushings, even load distribution and high precision are achieved throughout ram movement. Bedpex N T Rbefx Agksld ⚙️ Standard Equipment - Steel construction, 8-guided H-type press frame - Vibrationally stress-relieved frame structure - Bronze Zr14 slide bushings - WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via display - Cooling system - Off-line filtration - Dual-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 1000 - Type: Steel construction, 8-guided H-frame press type - Frame Material: St52 – ERDEMİR - Slide Bushings: Bronze Zr14 - Capacity (Ram): 1000 Tons - Movable Table Dimensions: 1500 × 2000 mm - Fixed Table Dimensions: 1500 × 2000 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relieving: Vibration stress relief - Welding: TÜRK-AK accredited WPQR and WPS certified EN ISO 15614-1/2017 welding applications - Max. Operating Pressure: 250 Bar - Total Motor Power: 75 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Movable Table Rapid Down Speed: 150 mm/sec - Movable Table Forming Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Main Cylinder Inner Diameter: Ø500 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units - Approximate Press Height: 6000 mm - Approximate Press Width: 3450 mm - Approximate Press Depth: 2400 mm - Height of Lower Table from Floor: 1450 mm - Pre-fill Valve: NG 200 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Sensor: NOVATECHNIK or TURCK - PLC: DELTA - Touch Panel Display: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approximate Weight: 55 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 800 t, table width: 1,500 mm, table length: 2,000 mm, stroke length: 800 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 800 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for heavy-duty sheet metal forming, straightening, assembly, and high-tonnage pressing applications. The 8-guided slide H-frame construction ensures balanced distribution of high forces generated during pressing, providing maximum rigidity and long service life. The CHP 800 model has been developed targeting reliable and stable performance for high-capacity production lines. CHP Series – Structural Features CHP series presses are engineered considering heavy industrial conditions. The frame and main supporting components are stress-relieved using vibration methods. Bronze Zr14 slide bearings ensure even load distribution and precise movement throughout the ram stroke. ⚙️ Standard Equipment • Steel construction with 8-guided slides in H-type press frame • Stress-relieved frame structure by vibration • Bronze Zr14 slide bearings • Welded joints approved with WPQR & WPS certified by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing in compliance with CE standards • PLC-controlled hydraulic system • DELTA 7” touchscreen panel • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter contamination warning system • On-screen monitoring of hydraulic oil temperature and system status • Cooling system • Off-line filtration • Dual-hand control system • Light curtain (standard for operator safety) • SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 800 • Type: Steel construction, 8-guided slide H-frame press • Frame Material: St52 – ERDEMİR • Slide Bearing: Bronze Zr14 • Capacity (Ram): 800 tons Bsdpfx Aex N T Nkjgkjld • Movable Table Size: 1500 × 2000 mm • Fixed Table Size: 1500 × 2000 mm • Parallelism Tolerance: 120 micron/meter • Perpendicularity Tolerance: 60 micron/meter • Stroke (Ram): 800 mm • Min. Clearance: 100 mm • Max. Clearance: 900 mm • Welded Structure Stress Relief: Vibration stress relieving • Welding Process: WPQR and WPS certified by TÜRK-AK (according to EN ISO 15614-1:2017; inspected by certified welding coordination engineers per EN ISO 14731) • Max. Working Pressure: 250 Bar • Total Motor Power: 75 kW – IE3 • Main Pump: 70 cm³ – REXROTH or PARKER • Movable Table Fast Approach Speed: 150 mm/sec • Movable Table Drawing Speed: 12 mm/sec • Movable Table Return Speed: 170 mm/sec • Main Cylinder Inner Diameter: Ø390 mm – Ck45 (2 units) • Auxiliary Acceleration Cylinders: 2 units • Approx. Press Height: 6000 mm • Approx. Press Width: 3350 mm • Approx. Press Depth: 2700 mm • Lower Table Height from Floor: 1450 mm • Pre-fill Valve: NG 200 • Hydraulic Unit: REXROTH or PARKER • Cooling System: EMMEGI – CIESSE – PARKER • Off-line Filtration: REXROTH or PARKER • Linear Position Scale: NOVATECHNIK or TURCK • PLC Application: DELTA • Touchscreen Panel: DELTA 7” • Electrical Components: SIEMENS – SCHNEIDER • Approximate Weight: 45 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 600 t, table width: 1,200 mm, table length: 1,500 mm, stroke length: 800 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 600 H-Type Single-Acting Hydraulic Press – 8-Guide General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial machines developed for sheet metal forming, straightening, assembly, and heavy-duty pressing applications. The 8-guide H-frame structure ensures an even distribution of the high forces generated during pressing, providing long-lasting and stable operation. The CHP 600 model is designed to deliver reliable performance for production processes requiring high tonnage. CHP Series – Structural Features The CHP series presses are engineered for demanding heavy-duty conditions. The frame and supporting components are stress-relieved by vibration. Bronze Zr14 guide bushings provide smooth load distribution and high precision during ram movement. ⚙️ Standard Equipment - Steel construction, 8-guide H-type press frame - Vibratory stress-relieved frame structure - Bronze Zr14 guide bushings - WPQR & WPS certified welding applications by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 600 - Type: Steel construction, 8-guide H-frame press - Frame Material: St52 – ERDEMİR - Guide Bushings: Bronze Zr14 - Capacity (Ram): 600 tons - Moving Table Dimensions: 1200 × 1500 mm - Fixed Table Dimensions: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Min. Clearance: 100 mm - Max. Clearance: 900 mm - Stress Relief: Vibration stress-relief - Welding Application: WPQR and WPS certified welding by TÜRK-AK accreditation with EN ISO 15614-1/2017 certificate (supervised by welding coordination engineers certified per EN ISO 14731) - Max. Working Pressure: 250 Bar Bsdpfx Aex N T Iaogkold - Total Motor Power: 55 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Rapid Descent Speed: 150 mm/s - Moving Table Forming Speed: 12 mm/s - Moving Table Return Speed: 170 mm/s - Main Cylinder Inner Diameter: Ø550 mm – Ck45 - Die Cylinder Inner Diameter: Ø320 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approximate Press Height: 5900 mm - Approximate Press Width: 3250 mm - Approximate Press Depth: 2300 mm - Distance from Floor to Lower Table: 1400 mm - Pre-filling Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Displacement Transducer: NOVATECHNIK or TURCK - PLC System: DELTA - Touch Panel Screen: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 28 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 500 t, table width: 1,200 mm, table length: 1,500 mm, stroke length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 500 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guided H-frame structure ensures stable and repeatable operation by evenly distributing the high loads generated during pressing. The CHP 500 model is designed for long-lasting and reliable performance in heavy-duty manufacturing processes requiring high tonnage. CHP Series – Structural Features CHP series presses are engineered with heavy-duty operation in mind. The frame and supporting components are stress-relieved using vibration methods. Bronze Zr14 slide bearings provide uniform load distribution and long-term precision throughout the ram movement. ⚙️ Standard Equipment - Steel construction, H-type frame with 8 robust slide guides - Vibration stress-relieved frame and carrier components - Bronze Zr14 slide bearings - WPQR & WPS certified welding applications, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine body designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination alert - On-screen hydraulic unit oil temperature and system status monitoring - Cooling system - Off-line filtration - Dual-hand control system - Light curtain (operator safety standard) - SIEMENS – SCHNEIDER electrical components Bjdpsx N T H Aefx Agkold 📐 Technical Specifications – CHP 500 - Type: Steel construction, 8-guided H-type press frame - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 500 tons - Moving Table Dimensions: 1200 × 1500 mm - Fixed Table Dimensions: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Min. Daylight Opening: 100 mm - Max. Daylight Opening: 1100 mm - Stress Relief: Vibration stress-relieving - Welding Application: WPQR and WPS certified by TÜRK-AK under EN ISO 15614-1/2017, welding applications supervised by certified welding coordination engineers in accordance with EN ISO 14731 - Max. Operating Pressure: 250 bar - Total Motor Power: 45 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø500 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approx. Height: 5800 mm - Approx. Width: 3250 mm - Approx. Depth: 2200 mm - Bottom Table Height from Floor: 1400 mm - Front Fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC: DELTA - Touch Panel Display: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 23 tons Manufacturing Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 400 t, table width: 1,200 mm, table length: 1,500 mm, stroke length: 800 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 400 H-Frame Single-Acting Hydraulic Press – 8-Guide General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die press applications. Thanks to the 8-guide H-frame construction, high loads generated during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 400 model is designed to deliver long-lasting and reliable performance for heavy-duty applications that require high tonnage. Bljdpfxsx N T Hpe Agked CHP Series – Structural Features The CHP series presses are engineered with heavy-duty conditions in mind. The frame and supporting components are stress-relieved through vibration. Bronze Zr14 slide bearings contribute to long-term precision by ensuring uniform load distribution during ram movement. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Stress-relieved frame and carrier components by vibration - Bronze Zr14 slide bearings - TÜRK-AK accredited WPQR & WPS certified welding applications (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and production in compliance with CE standards - PLC controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - Monitoring of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 400 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 400 Tons Movable Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 microns/meter Squareness Tolerance: 60 microns/meter Ram Stroke: 800 mm Min. Clearance: 100 mm Max. Clearance: 900 mm Stress Relief: Vibratory stress relief Welding Application: TÜRK-AK accredited WPQR & WPS certified EN ISO 15614-1/2017 welding application certificate (supervised by certified welding coordination engineers in accordance with EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/sec. Movable Table Forming Speed: 12 mm/sec. Movable Table Return Speed: 170 mm/sec. Main Cylinder Internal Diameter: Ø450 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Machine Height: 5600 mm Approx. Machine Width: 3250 mm Approx. Machine Depth: 2200 mm Lower Table Height from Floor: 1400 mm Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Ruler: NOVATECHNIK or TURCK PLC: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 19.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 300 t, table width: 1,000 mm, table length: 1,200 mm, stroke length: 600 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 300 H-Type Single Acting Hydraulic Press – 8-Guided Sliders General Description The CRONOSSTECH CHP series H-type single acting hydraulic presses are high-rigidity, industrial press solutions developed for sheet metal forming, straightening, assembly, and die-stamping applications. The 8-guided H-frame construction ensures that the high loads generated during pressing are evenly distributed, resulting in stable and repeatable operation. The CHP 300 model is designed to provide long-lasting and reliable performance for medium to high tonnage production requirements. CHP Series – Structural Features CHP series presses are engineered considering heavy-duty conditions. The frame and carrier components are stress-relieved via vibration methods. Bronze Zr14 slide bearings ensure even load distribution during ram movement, contributing to the preservation of precision over extended periods. ⚙️ Standard Equipment - Steel construction, H-type frame press with 8 guided sliders - Stress-relieved frame and carrier components by vibration - Bronze Zr14 slide bearings - Welding applications certified by TÜRK-AK with WPQR & WPS approval (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - 7'' DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - Monitoring of oil temperature and system status of the hydraulic unit via display - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 300 Type: Steel construction, 8-guided H-frame press Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 300 Tons Movable Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relief: Vibration stress relief Welding Application: Welding applications certified by TÜRK-AK with WPQR and WPS approval per EN ISO 15614-1/2017 (inspected by certified welding coordination engineers in line with EN ISO 14731) Max. Operating Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/s Movable Table Forming Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø390 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approximate Press Height: 4400 mm Approximate Press Width: 3250 mm Approximate Press Depth: 2200 mm Bottom Table Height from Floor: 1350 mm Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Encoder: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 10.5 Tons Blodpfxex N T E Ee Agkjd Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 250 t, table width: 1,000 mm, table length: 1,200 mm, stroke length: 600 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 250 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet forming, straightening, assembly, and die pressing applications. Thanks to the 8-guide H-frame design, loads formed during pressing are distributed evenly, ensuring stable and repeatable operation. The CHP 250 model is designed to deliver durable and reliable performance for medium-to-high tonnage production processes. CHP Series – Structural Features CHP series presses are engineered for heavy-duty applications. The frame and supporting components have been stress-relieved by vibration. Bronze Zr14 slide bushings contribute to long-term precision by ensuring smooth load distribution during ram movement. ⚙️ Standard Equipment - Welded steel construction, H-type press frame with 8 slides - Vibration stress-relieved frame and structural components - Bronze Zr14 slide bushings - Welding applications approved by TÜRK-AK accredited WPQR & WPS (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and manufacture compliant with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Display of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 250 - Type: Welded steel construction, 8-guided H-frame press - Frame Material: St52 – ERDEMİR - Slide Bushings: Bronze Zr14 - Capacity (Ram): 250 Tons - Movable Table Size: 1000 × 1200 mm - Fixed Table Size: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 600 mm - Min. Daylight: 100 mm - Max. Daylight: 700 mm - Stress Relief: Vibration stress-relieved - Welding: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1/2017), supervised by welding coordination engineers certified to EN ISO 14731 - Max. Operating Pressure: 250 Bar Bsdsx N T Elepfx Agkold - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Movable Table Rapid Descent Speed: 150 mm/sec - Movable Table Pressing Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø360 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Machine Height: 4200 mm - Approx. Machine Width: 3250 mm - Approx. Machine Depth: 2200 mm - Lower Table Height from Floor: 1350 mm - Pre-fill Valve: NG 125 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC System: DELTA - Touchscreen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approx. Weight: 9.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 200 t, table width: 800 mm, table length: 1,000 mm, stroke length: 600 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 200 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial press solutions developed for sheet metal forming, straightening, assembly, and die stamping applications, offering high rigidity. Thanks to its 8-guided H-frame structure, loads occurring during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 200 model is specifically designed for medium to high-tonnage applications, providing reliable performance and long service life. CHP Series – Structural Features The CHP series presses are engineered considering heavy-duty operational conditions. The main frame and supporting parts are stress-relieved by vibration. Bronze Zr14 guide bushings ensure smooth ram movement and long-term precision. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 guides - Stress-relieved main frame and carrier parts by vibration - Bronze Zr14 guide bushings - WPQR & WPS welding applications approved by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination indicator - Monitoring of hydraulic unit oil temperature and system status via the screen - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER control components 📐 Technical Specifications – CHP 200 Type: Steel construction, H-frame press with 8 guides Frame Material: St52 – ERDEMİR Guide Bushing: Bronze Zr14 Capacity (Ram): 200 Tons Movable Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relief: Vibration stress relief Welding Application: WPQR and WPS approved by TÜRK-AK, with EN ISO 15614-1/2017 welding certificate (supervised by certified welding coordination engineers per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Rapid Down Speed (Movable Table): 150 mm/sec Bumping Speed (Movable Table): 12 mm/sec Return Speed (Movable Table): 170 mm/sec Main Cylinder Inner Diameter: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Blsdpfxsx N T D Us Agkjd Approximate Press Height: 3800 mm Approximate Press Width: 2950 mm Approximate Press Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Control Components: SIEMENS – SCHNEIDER Approximate Weight: 8 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 150 t, table width: 800 mm, table length: 1,000 mm, stroke length: 500 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 150 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial machines designed for sheet metal forming, straightening, assembly, and die pressing applications. Featuring a rigid steel frame and an 8-slide H-body structure, they ensure stable, balanced, and repeatable operation during pressing tasks. The CHP 150 model is specifically developed to deliver reliable performance and long service life for medium-capacity applications. CHP Series – Structural Features CHP series presses are engineered for heavy-duty industrial use. The frame and supporting components are stress-relieved by vibration. Bronze Zr14 slide bearings provide precise load transfer and extended operational stability. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 guide slides - Stress-relieved frame and support components by vibration - Bronze Zr14 slide bearings - WPQR & WPS approved welding applications with TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in accordance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination alert - Display of hydraulic unit oil temperature and system status on the screen - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 150 Type: Steel construction, H-frame with 8 guide slides Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 150 Ton Moving Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/m. Perpendicularity Tolerance: 60 micron/m. Stroke (Ram): 500 mm Min. Daylight: 100 mm Max. Daylight: 600 mm Stress Relief: Vibration stress relief Welding Application: WPQR and WPS certified by TURK-AK; EN ISO 15614-1:2017 welding certificate (audited by certified welding coordination engineers according to EN ISO 14731) Blsdox N T Dzopfx Agksd Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/s Moving Table Forming Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø280 mm – Ck45 Approx. Height: 3650 mm Approx. Width: 2950 mm Approx. Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 7 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 100 t, table width: 800 mm, table length: 1,000 mm, stroke length: 500 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 100 H-Type Single-Acting Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial presses with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guideway H-frame design, they provide high stability and repeatable precision during pressing operations. CHP Series – Structural Features CHP series presses are engineered with heavy-duty operation in mind. The frame and carrier components are stress-relieved by vibration. The bronze Zr14 material used in slide bearings ensures long service life and stable operation. Highlighted Advantages - 8-guideway H-frame design - Vibration stress-relieved steel construction - Welding applications in accordance with ISO standards - PLC control with touchscreen interface - Operator safety and process stability oriented design ⚙️ Standard Equipment - Steel construction, 8-guideway H-type press frame - Vibration stress-relieved frame and carrier components - Bronze Zr14 slide bearings - Welding applications certified by TÜRK-AK accredited WPQR & WPS (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and production in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring via screen - Cooling system and off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 100 Type: Steel construction, 8-guideway H-frame press Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 100 Tonnes Moving Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/mtr Perpendicularity Tolerance: 60 micron/mtr Ram Stroke: 500 mm Min. Clearance: 100 mm Max. Clearance: 600 mm Stress Relieving: Vibration stress relief Welding Application: WPQR and WPS certified welding process accredited by TÜRK-AK (certified welding supervised by engineers in accordance with EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Pressing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Diameter: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Height of Press: 3400 mm Approx. Width of Press: 2950 mm Approx. Depth of Press: 2000 mm Table Height from Floor: 1250 mm Pre-Fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 6.5 Tonnes Bjdpfxsx N Tx Ss Agkeld Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: ready for operation (used), Hydraulic fixed angle notching machine COMA CA MOD. CHP 260. Two workstations: notching machine + punching machine. Blade length: 260 mm. Bodpfx Agewhpg Asksld Work surface: 850 x 700 mm. Workable thickness: 6 mm No. 4 blank holder pistons. Punching: Power T 14 Weight: 1300 kg Use and maintenance manual.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: A05L503370, continuous power (apparent): 350 kVA, continuous power: 280 kW (380.69 HP), protection type (IP code): IP23, 2 Stamford generators No.1 year of manufacture: 2005 Bljdpfx Agjx Sp Twsksd No.2 year of manufacture: 2015 dismantled can also be sold individually Were part of a Schnell Scania CHP unit (250 kW) Professionally refitted and thoroughly cleaned by a specialist company