Used Coil for sale (1,177)

Condition: used, Year of construction: 1990, material width coil line 650 mm coil weight 2 x 3,5 t coil internal diameter 460 - 530 mm coil external diameter 1500 mm material thickness coil line 0,8 - 3,0 mm no. of straightening rolls 7 no. of rolls at in- and outlet 4 roll diameter 80 mm feed length 0 - 500 mm Guedevuuduepfx Anxjb power requirement 10,0 kW weight 10,0 t dimensions of the coil line 8,8 x 4,0 x 2,55 m Straightening machine Dimeco, 1676 EV with inlet table and pre-shaping roll, hydraulic loading bridge Double decoiler Dimeco 2382 FFPS with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device elektronic roll feed Microfeed 1140 E with DC-drive, pneumatic intermediate lifting of the rolls can only be offered without putting into operation - video at seller's site before dismantling available

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Width of expansion jaws: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system Gujdpfjhx R Etox Anxeb - Hydraulic pressing arm with hydraulically driven double pivot roller - Coil car with 12 ton lifting capacity and 300 mm lift - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Good condition – not electrically operational

Condition: used, Decoiler, pivoting decoiler GSW SCHWABE Type LHD 50/800 Sond Double decoiler, double mandrel decoiler Factory No.: 5775 Year of manufacture: approx. 1995 Coil weight: 50 kg per side Coil width: max. 130 mm Coil inner diameter: 155 - 445 mm Coil outer diameter: 850 mm Support discs: Ø 850 mm Start rings: Ø 850 mm Godpfx Ajhubgwenxjub Distance from center of mandrel shaft to base: 980 mm - Manual 180° rotatable decoiler assembly with locking positions - Central expansion via rotation lever adjustment - Mechanical disc brake, adjustable brake shoes with knurled screw Required space (L x W x H): 1000 x 850 x 1500 mm Weight: 190 kg Good condition

Condition: new, Year of construction: 2021, Layout: Round bale grab Empty weight: 7.500 kg Attachment suited for: Lifting equipment Guodpfopa Rmkjx Anxjb Capacity: 32 M.T. Jaw Aperture(min-max): 160mm/2400mm Jaw Teeth Length: 200mm Open/Close Time: ~7,5 sec Axial Rotation Time: ~30 sec Axial Rotation Time: 270° Weight: 7500kg Crane Hook Type: DIN 15401 No:40 hook Ambient Temperature: 45 ºC Max. Coil Temperature: 1100 ºC Energy Supply Voltage: 400 VAC, 3 Faz, 50 Hz

Year of construction: 2020, condition: new, Type: Loader/unloader Crane: Yes Selling price: € 250, US$ 263,3 Crane load capacity: 40000 kg Lifting Capacity: 40 tons Maximum Open: 2350mm Maximum Close: 540 mm Close Velocity: 4 m/min Turning Speed: 2.3 rpm Power Unit: 3×400V , 50 Hz OperationalTemperature: 900°C Coil – 700°C Environment Gujdpfx Asph Rm Isnxsb

Condition: good (used), functionality: fully functional, Year of construction: 2002, control type: manual, degree of automation: manual, actuation type: hydraulic, pipe diameter (max.): 60,90,115 mm, tube wall thickness (max.): 3 mm, number of axes: 3, working height: 700 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 200 bar, pressure (max.): 200 bar, number of digital displays: 3, Equipment: CE marking, documentation/manual, emergency stop, quick-change device, Limpet coil roller hydraulic to form half round pipe from flat stainless steel strip and bending into wanted radius with spiral continuous. Gusdpoyik Hcjfx Anxob -Shafts output 80 mm -Interchangeable set of rollers on the shafts for the different size of pipe 60 mm , 90 mm , 115 mm -Coil holder for the reel metal strip with guide-way bench uncoiling and alignment the steel strip to the rolling machine -Pinching lower central roll adjustable to form the half pipe -Digital position readout to determine the bending diameter of the coil, the pitch of the coil, the half tube shape forming -hydraulic arm movable in 3 directions to set the pitch of the coil roll -Upper vertical support hydraulic operated to hold in position the formed diameter and collect the coils from diameter 700 to diameter 3000 mm -Operator console electric with push buttons and digital position readouts for the coil length, the bending radius and the forming load. -Service manuals and operation books along with the machine

Condition: new, type of cooling: air, For sale: 8x Nordmann AT4 humidifiers. Brand new units, immediately deployable and easy to refill. Suitable for industrial applications and HVAC systems where precise humidification is required. Gsdpfx Anetncckjxoub Quantity: 8 units Condition: New Immediately available Note: Sale as a set Transport available on request

Condition: not inspected (used), functionality: unexamined, ⚠️ Important Notice: For Business Customers Only (B2B) This sale is exclusively intended for entrepreneurs as defined by § 14 BGB (commercial operators, self-employed persons, freelancers). Sale to private individuals (consumers) is excluded. By submitting a bid or making a purchase, you expressly confirm your status as a business entity and that the acquisition is for your commercial or self-employed professional activities. _____ For sale is a strip coating line. The system originates from insolvency assets and was in successful operation until the facility was closed. Technical specifications & capacities: Guodsyw Hiyspfx Anxeb • Material: Suitable for aluminum and stainless steel coils. • Strip width: 80 mm up to max. 600 mm. • Material thickness: 0.1 mm to 2.0 mm (for aluminum). • Processing speed: approx. 20–25 m/min. • Coil weight: Max. 3,000 kg. • Inner diameter: 400 mm (expandable to 500 mm with available adapter chucks). • Coating options: From narrow color stripes (starting at 7 mm) up to full-surface coating. • Temperature range: Oven operation at approx. 250°C. System design & components: • Infeed: Expandable decoiler with height-adjustable coil transport cart (load capacity 3,000 N). • Coating unit: Double coater for precise paint application using steel roll deflection. • Drying: Drying and firing zone with two Eclipse gas burners and control panel. • Safety & Environment: FID probe for continuous monitoring of solvent concentration in the oven, including control unit. • Cooling: Cooling section with fresh air supply before exiting the oven. • Post-processing: Integrated slitting device for strip longitudinal cutting (incl. slitting knives and spacer rings). • Outfeed: Hydraulic strip guiding, friction plate brake, and transfer arms at the recoiler. Scope of delivery: • Complete system as described. • Accessories (spacer rings, slitting knives, adapter chucks). Inspection & transaction: • Condition: Used, fully operational up to decommissioning. • Location: Wuppertal. • Dismantling/transport: Dismantling and transport to be carried out by the buyer at their own expense. • Invoice: You will receive a proper invoice with VAT shown separately. Terms of sale and delivery: • Condition: The system is sold as is from its current location. • Disclaimer: As this is a B2B transaction between professionals, the sale is made to the exclusion of any warranty and guarantee. • Inspection: On-site inspection is expressly recommended.

Condition: used, Heavy-Duty Coil Transport Cart Very robust custom-built construction Load capacity: approx. 5 tons Length: 1500 mm Width: 1300 mm Height: 460/660 mm Ground clearance: approx. 250 mm Overall length with fork sleeves: 1780 mm Fork insertion distance: 580 mm Maximum fork width: 200 mm Maximum fork thickness: 75 mm - 4 steel swivel castors, each with 2 wheels (wheel outer diameter approx. 220 mm) (steel wheels) - Equipped with fork pockets for easy handling with a forklift truck - Safety pins for locking the fork sleeves Designed for transporting coils, shafts, bushings, etc. using a forklift. The cart can be fully loaded and moved within the facility using a small forklift. Guodpfxjf Axnme Anxsb Unladen weight: 585 kg Total length: 175 cm Total width: 130 cm

Condition: used, empty load weight: 7,743 kg, axle configuration: 3 axles, first registration: 09/2018, suspension: air, Year of construction: 2018, Equipment: ABS, Poids à vide: 7743kg, Suspension pneumatique, Dispositif anti- encastrement, Système de freinage électronique EBS, Fiche de raccordement 1x15 et 2x7 broches, Anti-spray, Vous trouverez un aperçu de tous nos véhicules disponibles sur notre site web . Besoin d’un financement ? Nous proposons des financements individualisés, ainsi que du full-service ou un service télés serons heureux de vous conseiller personnellement. Guedpfx Aoyw Amzenxjb

Condition: good (used), axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,680 mm, loading space width: 2,470 mm, loading space height: 2,690 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2023, Equipment: ABS, = Additional Options and Equipment = - EBS - Lifting roof = Notes = Number of axles: 3, Own weight: 7,804 kg, Gross weight: 39,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Build year: 2023, Lifting roof, Sliding roof, Axle type: SCHMITZ = Further Information = General information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tyre tread left: 7 mm; Tyre tread right: 7 mm Axle 2: Tyre tread left: 11 mm; Tyre tread right: 15 mm Axle 3: Tyre tread left: 5 mm; Tyre tread right: 3 mm Weights Unladen weight: 7,804 kg Payload: 31,196 kg Gross vehicle weight: 39,000 kg Functionality Sliding roof: Yes Environment Emission class: Euro 0 Condition Technical condition: Good Optical condition: Good Damage: None = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European makes, model years, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing selection • Recognisable quality • Competitive pricing • Reliable business dealings • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Professional technical services • The security of 'recognisable quality' • And more… Please visit our website for special offers and the complete inventory: Guodpfsyk Sc Rsx Anxeb Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Ask directly about our European warranty package.

Condition: used, For sale: Trane 6CWQ5R2 glycol fan coil unit with an estimated cooling capacity of approx. 6–8 kW. Suitable for applications with a glycol/water circuit and deployable for various cooling and climate solutions. Brand/Model: Trane 6CWQ5R2 Medium: Glycol (water/glycol) Capacity: approx. 6–8 kW Gsdoyluw Topfx Anxeub Important: This product is sold strictly as-is. Ex stock / shipping available upon agreement. Contact us for more information, additional photos, or to arrange a viewing.

Year of construction: 1996, condition: used, functionality: unexamined, machine/vehicle number: 2566, Marsilli coil winding machine with 6 spindles, No. 437 Guedpjyuthijfx Anxob Type WM 2002/6 - 100, serial no. 2566

Year of construction: 1996, condition: used, functionality: unexamined, machine/vehicle number: Nr. 960104, Spool winding machine DAK Graupner No. 418 Godpfx Aeyuthcjnxjub Graupner spool winding machine, winding shaft for EI 135/52 Wire 1: 0.3 to 2.0 mm diameter Wire 2: 1.0 to 4.0 mm diameter

Condition: used, functionality: unexamined, machine/vehicle number: 2045, Coil winding machine Frieseke & Höpfner type FW 200, machine no. 2045, no. 417 Godpjyutgxjfx Anxsub

Year of construction: 2019, operating hours: 500 h, condition: like new (used), functionality: fully functional, If you request technical details about line can share more details !! Aluminium Coil&Sheet Perforation Machine as feasible for working different Aluminium coil&sheet raw material. This machine lines for desired eact final perforated sheet solution. Aluminium Coil&Sheet Perforating Machine Main Units: – Press Feeding Unit – Stucco Embossing Unit – Punching Unit – Cutting Unit – Stacking Unit – Recoiling Unit – Cut to Length Unit Gjdpfxow Hw T Is Anxjub – Automatic Packing Unit GENERAL FEATURES Material : Aluminum and Alloys Max. Coil Weight : 5 Tons Max. Product Thickness : 2,0 mm Min. Product Thickness : 0,4 mm Max. Coil Width : 1000 mm Min. Coil Width : 400 mm Max. Coil Outer Diameter : 1600 mm Min. Coil Outer Diameter : 1000 mm Included Three Round Hole Preforation Tools : 3x5 5x8 10x15

Condition: used, axle configuration: 3 axles, first registration: 05/2014, color: other, Year of construction: 2014, Empty weight: 7.720 kg Guodpfx Aoyvfv Ienxjb Axle 1: left 10 mm right10 mm Axle 2: left12 mm right 12mm Axle 3: left 8 mm right 8 mm

Year of construction: 1991, condition: good (used), coil weight: (2 x 15 t) / 1 x 30 t coil width: max. 1.900 mm coil OD: max. 1.900 mm Gusdpfx Anjlimrmexjb

Year of construction: 2002, condition: excellent (used), V dimensions: 1.200 x 700 mm coil weight: 25 t Gusdpslimtkjfx Anxjb stroke: 700 mm

Year of construction: 1990, condition: good (used), coil weight: max. 15 t Gusdpfx Aelimuhsnxsb coil OD: max. 1.800 mm

Year of construction: 1991, condition: good (used), coil weight: (2 x 15 t) / 1 x 30 t Gusdpfsbh Dg Sjx Anxsb coil width: max. 1.900 mm coil OD: max. 1.900 mm

Year of construction: 1990, condition: good (used), coil weight: max. 15 t coil OD: max. 1.800 mm Gedpfx Anebibu Tsxoub

Year of construction: 1994, condition: good (used), coil width: max. 2.000 mm Guedpfxjd Ha Hce Anxeb coil weight: max. 30 t stroke: 1.000 mm

Year of construction: 2017, condition: excellent (used), coil width: 1.650 mm coil weight: 15 t stroke: 600 mm Gjdpfxeinupvs Anxjub year: unknown / overhauled in 2017

Year of construction: 2002, condition: excellent (used), V dimensions: 1.200 x 700 mm coil weight: 25 t stroke: 700 mm Gedpfxjlimqto Anxoub