Used Colchester Mastiff 1400 for sale (65)

Condition: good (used), Year of construction: 1995, operating hours: 18,282 h, functionality: fully functional, turning diameter over cross slide: 246 mm, spindle bore: 54 mm, turning diameter: 400 mm, turning diameter over bed slide: 400 mm, center height: 585 mm, turning length: 1,250 mm, feed length X-axis: 210 mm, feed length Z-axis: 1,250 mm, quill stroke: 155 mm, quill diameter: 73 mm, total length: 2,740 mm, total width: 1,650 mm, total height: 1,560 mm, metric thread diameter (max.): 40 mm, swing diameter over top slide: 246 mm, bed width: 318 mm, Turning diameter in gap: 585 mm, rotational speed (max.): 2,750 rpm, rotational speed (min.): 6 rpm, overall weight: 2,300 kg, rapid traverse Z-axis: 6,000 m/min, quill mount: MK 5, spindle mount: MK 4, CNC lathe fully functional and ready for operation. All detailed technical documentation available in German. Programs, software, and zero point setting on USB stick. Accessories and tools included. FANUC control system. The lathe can be tested and is ready for use. Sale due to lack of utilization within the company. Invoice with separate VAT can be issued. Loading facility available. Kdodpfx Adjxr Ua Tjwsg

Condition: good (used), Year of construction: 2000, Equipment: documentation/manual, LATHE TORNADO COLCHESTER 200 CNC FANUC GE Series DIAM. AUTOCENTRATING MANDRIN : 250 mm CORSE : Kdodpfx Aetuut Usdweg X : 215 mm Z : 400 mm TOOL MAGAZINE : 12 POSITIONS INCLUDING VARIOUS TOOL HOLDERS AND TOOLS BAR WIDTH : 65 mm TAILSTOCK IN CYCLE CHIP EVACUATOR INCLUDING ALL DOCUMENTATION

Condition: ready for operation (used), functionality: fully functional, spindle bore: 42 mm, center height: 165 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 30 rpm, overall weight: 900 kg, Ladies and Gentlemen, We are selling a Colchester Master 2500 lathe with Heidenhain digital readout. The machine is fully functional and can be tested on site. Availability: immediately Center width: 635 mm Center height above bed: 165 mm Ksdpfxju St S Ao Adwodg Center height above support: 105 mm Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm. 16 steps Inner tailstock taper: MK 3 Drive power: 3.7 kW Space requirement: (LxWxH) 1700 x 880 x 1200 mm Weight: approx. 850 kg

Condition: new, Year of construction: 2025, 0330 mm 210 mm 1000 mm 167 mm 40 mm Kdedpfxowp Tq Uj Adwog 2,2 kW

Condition: ready for operation (used), Year of construction: 2008, Year of manufacture: 2008 Control system: Fanuc Maximum length of the turning: 650 mm Max. turning diameter: 350 mm Spindle bore: 42 mm Maximum rotary speed of the spindle: 3500 1/min Length: 2400 mm Width: 1700 mm Height: 1500 mm Weight: 1800 kg Accessories/options: 3-jaws chuck lots of jaws Kdodpfev Tpanjx Adwog collet type chuck collets steady faceplate Parat type tool holders Under power in our warehouse.

Condition: new, Year of construction: 2025, 0400 mm 246 mm 1250 mm Kdodpfxoxcyxcs Adweg 195 mm 54 mm 7,5 kW

Condition: excellent (used), Year of construction: 2013, Alpha 1550XS - Cycle lathe incl. accessories Center distance is 1500 not 2000 Multifix holder 16 pieces Year of construction 2013 Top condition (really in top condition) Various interchangeable jaws (soft jaws) Kodpsunruyefx Adwsdg steady rest face plate Spindle bore 104mm Turning over bed 550mm Three-jaw chuck 315mm

Condition: good (used), Year of construction: 1999, Parts shown by hand not come. Kdedpow Uiguofx Adweg Technical details shown on picture.

Condition: used, machine/vehicle number: 1457, Outer-Ø: 205 mm Height: 59 mm Kedpfeb Nxhmjx Adwjdg Camlock receptacle DIN 55029: size 3

Condition: excellent (used), Year of construction: 1999, • FANUC 210i - T control (cycles) • Max. distance between centers: 1,250 mm • Max. turning diameter: 400 / 585 mm in offset • Spindle speed: 12 . . . 2,500 rpm • Spindle bore: 54 mm Kdsdpfx Adjw S E R Rjweg • X-axis: 210 mm • Z-axis: 1,181 mm • Cutting gap adjustment: 0.05 – 0.8 mm • Motor power: 7.5 kW • Weight: approx. 2,700 kg

Condition: good (used), Year of construction: 1999, All additional equipement from pictures will come. Kdedpfx Asww Irisdwsg Technical details shown on picture.

Condition: good (used), Year of construction: 2004, Technical details shown on pictures. Ksdeww Haxepfx Adwedg Parts shown by hand not come.

Condition: excellent (used), Year of construction: 2009, - Digital display. - Accessories available. Tips Height 170 mm Tip width 650 mm turning diameter over the bed 350 mm over the cross slide 196 mm in the offset 535 mm Width in front of the front plate 165 mm Spindle Spindle bore 42 mm Spindle nose D1-4" Camlock Morse taper in bushing no. 3 MT Spindle speeds 3 speed ranges 0 - 3250 rpm Main motor 7.5 kW (10 HP) Bed Slide guide width 318 mm Guide type V-shaped and flat Cross slide Width and length 180 - 850 mm Travel 250 mm Top slide Width 90 mm Travel 130 mm Tool holder 20 x 20 mm Quick-action tool lock Dickson No. 2 Tailstock Diameter of quill (nominal value) 63 mm Travel 145 mm Morse taper no. 4 M.T. Offset ±12 mm Lead screw Diameter 32 mm Thread 6 mm pitch or 4 T.P.I. Thread Metric Pitch 0.2 - 14 mm (51) Inch thread T.P.I. 2 -56 (56) Module thread pitches 0.2 - 3.5 (20) Diametrical pitch (D.P.) 8 - 56 (20) Feed rate Metric (R10 series) 0.018 - 1.2 mm/rev Inch (R10 series) 0.0007 - 0.048"/rev Face feed = approx. half of the longitudinal values Machine height Floor to spindle center 1070 mm Total length Kjdpfx Aotr Ud Sedwjdg 1250 mm Machine 2500 mm Total width 1100 mm Height over all 1300 mm Cooling pump Type AQ 3MG Headstock oil pump Type Interlube three-phase 27662-131 Weight 1250 mm between tips approx. 1450 kg

Condition: used, Year of construction: 2000, operating hours: 17,200 h, functionality: fully functional, machine/vehicle number: T 90077, turning length: 450 mm, turning diameter: 230 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 450 mm, rotational speed (max.): 4,000 rpm, overall weight: 2,800 kg, - Year of manufacture: 2000 - Single owner, used in-house - Fully functional, under power, ready for demonstration - Operating hours: 17,200 h - X-axis travel: 200 mm - Z-axis travel: 450 mm - Turning diameter: 230 mm - Turning length: 450 mm - Spindle speed: 4,000 rpm - Spindle bore: 52 mm - Spindle motor power: 11 kW Kjdpexgtrksfx Adwjdg - Control: Fanuc 21 i - Tailstock - 12-station VDI 30 turret - Chip conveyor - Weight: 2,800 kg Net price ex-works, unloaded, from location Luckenwalde (Germany), excluding transport

Condition: new, Year of construction: 2025, 0460 mm 270 mm 1500 mm 230 mm 76 mm 11 kW Kedpfewrma Ujx Adwedg

Condition: new, Year of construction: 2025, 0330 mm 1000 mm 167 mm Kedowp Tqzspfx Adwsdg 40 mm 3000 U/min DIN 55029 D1-4

Condition: new, Year of construction: 2023, 0460 mm 1500 mm 230 mm 78 mm 400 mm 2200 U/min D1-8 DIN 55029 95 mm 145 mm Kdjdpfx Aewp Th Tedwog

Condition: new, Year of construction: 2025, 0330 mm 210 mm 0635 mm 167 mm Kdedpfx Adowp Tfxsweg 40 mm 2,2 kW

Condition: new, Year of construction: 2024, 0350 mm 196 mm 0650 mm 170 mm 42 mm Kdsdpfowp Tpkex Adweg 7,5 kW

Condition: used, Year of construction: 2008, max. swing diameter over bed 510 mm max. turning diameter 260 mm Max. Turning length 540 mm travel -x axis 240 mm center height over bed 260 mm control FANUC 21i-TB spindle bore 77,5 mm no. of tools in turret 12 x tool taper VDI 40 CNC Lathe | COLCHESTER - TORNADO T8 The machine is in good condition. Please refer to further technical details in the attachement of the offer. Kdedovzcqpopfx Adwsg A machine video will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T 8 | T-8

Condition: used, Year of construction: 2010, functionality: fully functional, turning length: 450 mm, turning diameter: 220 mm, spindle bore: 64 mm, travel distance X-axis: 200 mm, helix angle: 60 °, TECHNICAL DETAILS Swing diameter: 440 mm Turning diameter: max. 220 mm Turning length: 450 mm Travel x-axis: 200 mm Control: Fanuc 18i-TB Helix angle: max. 60° Spindle Spindle nose: A2-5 Spindle height: 950 mm Chuck size: 170/210 mm Kjdpfx Adovtpwtowodg Spindle bore: 64 mm Draw tube for bar diameter: 54 mm Inner diameter of spindle bearing: 95 mm Max. spindle speed: 3500 rpm Spindle drive: 15 kW Axes "X" axes ball screw [Ø x pitch]: 32 x 8 mm "X" axes rapid traverse: 25 m/min "X" axes pressure force: 3.75 kN "Z" axes Ball screw [Ø x pitch]: 2 x 10 mm "Z" axis rapid traverse: 30 m/min "Z" axis pressure force: 4.44 kN "C" axis resolution: 0.001° Turret Tool holder: VDI 30 Number of stations: 12 Tool shaft size: 20 x 20 mm Max. boring bar Ø: 32 mm Driven tools: 12 Max. speed: 5000 rpm Max. power: 3.75 kW Connection coupling: DIN 5480 (16 x 0.8) MACHINE DETAILS Max. energy consumption: 28 kVA Space required: 3.9 m² Machine weight: approx. 4500 kg

Condition: good (used), Year of construction: 1999, functionality: fully functional, CNC lathe tornado A90 after renovation in 2024 tool head VDI30 equipment bar feeder collet chuck on E173 Kodjwavqxepfx Adwodg The machine is working can be seen in production

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, CNC cycle lathe Year of manufacture: 2003 Control: Fanuc 210i-T Kdsdowww Ndjpfx Adwjg Spindle bore: 102 mm Chuck: 315 mm Turret: 4-position Travel: X 300 mm / Z 2,000 mm Turning diameter over bed: 500 mm Turning diameter over support: 300 mm Tool package: 32 tool holders Various accessories, documentation

Condition: excellent (used), Lead and tension spindle lathe spindle bore 76 mm Center height 220 mm turning length 3.00 m Multifix steel holder with 5 cassettes Coolant device Ksdpfx Aeva Ef Tsdwedg Operating instructions

Condition: ready for operation (used), lathe Colchester Master Kedpfx Asd Hdqvsdwedg