Used Fat for sale (10)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12389, Equipment: documentation/manual, We are offering this used FAT T1 regeneration system, manufactured in 2013. 1. Brief Description For sale is a thermal sand regeneration system from the German manufacturer FAT Förder- und Anlagentechnik GmbH. The system is currently in operation and is being sold solely due to a capacity expansion at the site. The sale is not due to any technical or economic deficiencies. The system has only been operated in a production hall and is in very good technical and visual condition. 2. Technical Data Manufacturer: FAT Förder- und Anlagentechnik GmbH Psdpfx Alozhvagowerb Type: T1 Factory Number: 12389 Year of Manufacture: 2013 Fuel: Natural Gas Thermal Output: 350 kW Regeneration Temperature: approx. 850 °C Throughput: approx. 850 to 1,300 kg/h Sand System: PEP-SET / Cold Resin Systems Volatilization Loss: up to approx. 0.1% Installation: Production Hall Availability: Dismantling from mid-September 2026 3. Scope of Supply The scope of supply includes:  Frequency-controlled sand dosing via screw conveyor  Sieve  Magnetic Separator  Thermal Regeneration Furnace  Cooler Sand/Air Cooler (Recuperation) Air/Water Cooler Chilling Unit  Control Cabinet  PLC Control  Electrical Equipment  Pneumatic Components  Original FAT Documentation Not included in the scope of supply:  Dust extraction system, as it is connected to a central extraction system  Sand conveyor after the cooler The system is currently connected to the existing central dust extraction system of the plant. 4. Performance Features The system was designed for the regeneration of chemically bonded molding materials and achieves excellent regeneration results. Special Features:  Volatilization loss up to approx. 0.1%  High regenerant quality  Economical natural gas operation  Robust FAT construction  Proven industrial continuous operation  Complete technical documentation available 5. Documentation Scope The following documents are complete:  Operating Instructions  Maintenance Instructions  Circuit Diagrams  Pneumatic Diagrams  Installation Plans  Layout Drawings  Water Installation Plans  FAT Construction Drawings  Technical Documentation (2 folders) + Switchgear Planning The completeness of the documentation has been verified. 6. System Condition The system is in continuous production operation until dismantling. Advantages for the buyer:  Functional demonstration possible during operation  Inspection possible by appointment  Documented system condition  Weather-protected hall installation  Weather-independent dismantling and loading 7. Dismantling and Availability Dismantling is expected to be possible from mid-September 2026. The system is located inside a production hall and is very easily accessible for dismantling and loading operations. 8. Reason for Sale The system is being sold solely due to a capacity expansion at the production site. The existing system meets all technical requirements and is in functional condition. 9. Inspection Inspections and functional demonstrations are possible by prior appointment. Qualified interested parties will be provided with further technical documents, drawings and photo documentation upon request. If you have any questions or require further information, please send us a message or call us.

Condition: reconditioned (used), Year of construction: 2026, operating hours: 100 h, machine/vehicle number: BMWF241003, Professional Rebuild and Retrofit of Heavy CNC Lathes: Niles, Weiler, Gildemeister, TOS, TURMN The offer is for a TUR MN 560 CNC lathe. Max turning diameter: 560mm, max turning length: 960mm. Equipped with a 4-position Sauter turret. All wear parts have been replaced; the machine has been repainted and retrofitted with a new Siemens 828D. We specialize in restoring full operational capability and performing digital modernization of heavy machine tools that form the foundation of rigid and efficient production. We combine the legendary durability of heavy cast iron with state-of-the-art Industry 4.0 control systems. Why choose our retrofitted machine? Performance of a New Unit at 50% of the Price: We offer machines with the performance and accuracy of new machining centers at a fraction of the cost of a new investment. Unrivaled Rigidity: We rely on proven machine bases from brands such as Niles DFS 4 (slant bed, 17 t weight) or TOS SUA (load capacity up to 8 tons), which outperform modern, lighter designs in terms of vibration damping. Modern CNC Heart: We install the latest systems (Siemens Sinumerik ONE / 840D sl / 828D), ensuring full availability of spare parts, remote diagnostics, and ease of programming. ​ ​ Warranty and Support: Every machine after complete mechanical overhaul (DIN 8605 accuracy class) and electronic retrofit is covered by a 12‑month warranty. Our specializations: Niles DFS 3/4: Comprehensive rebuilds of multi-axis centers (C, Y, B) for the most demanding applications. Weiler E Series: Restoring legendary precision and intuitive cycle operation for premium toolrooms. Gildemeister NEF 710: “Smart Retrofit” of the control system, giving a second life to these reliable German designs. TOS SUA 80/100: Complete overhauls for the heaviest shaft and large-part machining. TURMN 630/800/1100: General overhauls and “Smart Retrofit” CNC control upgrades. Our offer goes beyond selling ready-made machines. We provide full flexibility and consulting throughout the investment process: Purchase on Request: At the customer’s request, we search for the optimal machine base on European markets (e.g. Germany, Italy, Poland). We use our experience in evaluating “dead CNC” machines to buy units at a price close to mechanical scrap value, while preserving their full potential for rebuild. Evaluation and Pricing of Market Machines: If the customer finds a machine independently, we offer a professional mechanical inspection (bed geometry, spindle play) and preparation of a detailed cost estimate for overhaul and retrofit. Predpfxsv R Dlys Alwsb Overhauls of Customer-Owned Machines: We carry out complete modernization of machines already installed in the customer’s machine park.

Condition: ready for operation (used), Year of construction: 2010, FAT TUR 630AMN x 2000 CNC Siemens 840D Yom: 2010 Turning diameter: 630 mm Turning diameter over top slide: 370 mm Turning length: 2,000 mm Psdjw Ecuuepfx Alworb

Condition: used, Year of construction: 1996, functionality: fully functional, turning diameter: 710 mm, turning length: 3,000 mm, Universal lathe FAT Poland Podpfoxxm A Hex Alwerb Model: TUR 710 x 3000 Year of manufacture: 1996 Accessories: Digital readout 3-jaw chuck Tool holder Steadies Live centre

Condition: new, Year of construction: 2025, machine/vehicle number: 0000, We offer complete revised FAT Lathes, in factories geometry, bed ground by FAT, new electrics, TUR 630 M x 2000 or TUR 630 M x 3000 TUR 630A x 3000 or TUR 630 A x 4000 spindlebore 140mm , 2 chucks 400 mm Bison Psdsnqzaispfx Alwjrb Machine deliverytimes 3 - 4 Months after written order Accescories as per Customer specifications

Condition: reconditioned (used), Year of construction: 2026, functionality: fully functional, spindle bore: 140 mm, turning diameter: 630 mm, turning diameter over bed slide: 380 mm, center width: 3,000 mm, turning length: 3,000 mm, technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: in stock, under power, ready for technical acceptance. Technical specifications: - distance between centers/turning length: 3000 mm - turning diameter over bed: 630 mm - dual spindle system - turning diameter over support: 380 mm Prjdpod Eafdsfx Alweb - spindle bore diameter: 140 mm - maximum workpiece weight between centers: 1500 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 18 - 1800 - range of feeds (mm/rev): longitudinal: 0.05 – 3,26 transverse: 0.25 – 1,63 - engine power: 15 kW - overall dimensions: total length: 4900 mm width: 1420 mm height: 1500 mm total weight: 3650 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 10-140 mm, with rollers - Steady rest, 10-180 mm, with rollers - Steady rest, 140-300 mm, with rollers - MULTIFIX quick change tool post

Condition: ready for operation (used), Rotation diameter over bed/slide: 560mm/300mm, max. workpiece weight between centers: 2500kg, max. workpiece weight in chuck: 800kg, center width: 1000mm, machining length: 980mm, feed: 8m/min, bed width: 433mm, tool positions: 8, tool holder: VDI40. Machine dimensions X/Y/Z: approx. 3000mm/2300mm/1800mm, weight: approx. 3700kg, control: Siemens 810D Manual Turn. Documentation available. On-site inspection is possible. Prodpowynvtofx Alwob

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 90 mm, turning diameter: 630 mm, turning diameter over bed slide: 630 mm, turning diameter over top slide: 380 mm, turning length: 3,000 mm, quill diameter: 90 mm, total length: 4,900 mm, total width: 1,420 mm, total height: 1,590 mm, rotational speed (max.): 1,800 rpm, rotational speed (min.): 18 rpm, overall weight: 3,700 kg, workpiece weight (max.): 1,500 kg, spindle mount: MK 6, The universal lathe FAT TUR 630M/3M has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: in stock, under power, ready for technical acceptance. Technical specifications: - distance between centers/turning length: 3000 mm - turning diameter over bed: 630 mm - turning diameter over support: 380 mm - spindle bore diameter: 90 mm - maximum workpiece weight between centers: 1500 kg - number of spindle speeds: 21 Prjdpfxsd Eaa Ee Alwsb - range of rotational speeds (rpm): 18 - 1800 - range of feeds (mm/rev): longitudinal: 0.05 – 3,26 transverse: 0.25 – 1,63 - engine power: 15 kW - overall dimensions: total length: 4900 mm width: 1420 mm height: 1500 mm total weight: 3650 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 10-140 mm, with rollers - Steady rest, 10-180 mm, with rollers - Steady rest, 140-300 mm, with rollers - MULTIFIX quick change tool post

Condition: new, functionality: fully functional, Spare parts for machines manufactured in Poland. AFM Andrychow, FUM Poreba, FAT Wrocław, AVIA Warszawa, Jafo Jarocin, ZM Tarnow, FAMOT Pleszew. Spare parts for Polish lathes, including: TUM 25, TUM 35, TUJ 50, TUJ 63, TUJ 560, TUJ 630, TUR 50, TUR 63, TUR 560, TUR 630, TPK 90, TRP 93, TRP 110, TR 115, TR 135. Spare parts for Polish milling machines, including: FND 25, FND 32, FND 40, C20, D36, D40, FF series, FR series. Prsdsum Ixxopfx Alweb

Condition: new, New tool holders for the FAT Wrocław TUR-50, TUR-560, TUR-63, TUR-630, TUR-710, and TUD 40/50 lathes. Spare parts for 4-way tool holders and many other mechanical parts and electromagnetic clutches for metalworking machines are also available for sale. Predpfxewak Dto Alwjb The largest selection in Europe. We ship our parts worldwide.