Used Cold former for sale (1,146)

SDI Select 60 Dry Ice Blast Cleaner

Call

Condition: excellent (used), Year of construction: 2013, Operating hours: 108 h, Dry ice cleaner with only 108 operating hours and flexible use of all types of dry ice Ice blasting unit ColdJet SDI 60 Select from year of manufacture 2013 With blasting hose, blasting gun (applicator in industrial version with lighting), grounding cable, round nozzle 11mm and flat nozzle 45mm with integrated 3-stage scambler power supply 230Volt maximum dry ice capacity of the container approx. 27kg dry ice consumption adjustable from approx. 0 to 160kg per hour blasting pressure range from approx. 1.4 bar to 17 bar compressed air requirement depends on the nozzle used Czd20cfgfd Very practical is the gun with integrated light and the possibility to switch between air only and air + ice The unit can be used with 3mm dry ice pellets, or optionally with ice blocks, discs and nuggets, in which case the required ice is scraped off. So you can flexibly use any available dry ice. Instruction manual in English Dimensions approx. 620 x 800 x 1100mm (LxWxH). Weight approx. 166kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

more

Listing

Wiehl

6,963 km

Cold Jet RDS 500 CUB

Cold Jet INC RDS-500-CUB

€7,900

ONO VAT not applicable

Call

Condition: excellent (used), Sold is a dry ice blasting machine from the company Coldjet in very good condition with only 328 blasting hours. The machine is sold including three blasting nozzles, blasting gun, three connection cables (power), blasting hose and air hose for connection to a compressor. Questions will be gladly answered and an inspection is possible with prior appointment. The machine is located in 51674 Wiehl. Gkkz2g

more

Listing

Lünen

6,968 km

Cold Jet SDI Select 60

Call

Condition: like new (used), Year of construction: 2013, Operating hours: 294 h, Dry ice cleaning device Cold Jet SDI 60 with only 294h operating hours and flexible use for all types of dry ice. With blasting hose, blasting gun, grounding cable, round nozzle and flat nozzle with integrated 3-stage scambler -Power supply 230 volts -maximum dry ice capacity of the container approx. 27kg -Dry ice consumption adjustable from approx. 0 to 160kg per hour -Blast pressure range from approx. 1.4 bar to 17 bar -Flexible and can be used for any available dry ice. -operating manual -The SDI Select 60 can be used with 3mm dry ice pellets and optionally also with ice blocks, slices and nuggets. Compressed air requirement depends on the nozzle used Dimensions approx. 620 x 800 x 1100mm (LxWxH). Weight approx. 166kg Dkcczv

more

Auction

Nižní Lhoty

6,179 km

Cold/Spline Rolling Machine

Escofier Flex 40

61 days left

Details

Condition: good (used), Year of construction: 2011, Functionality: unexamined, Several machines of this or similar types are available. We offer various production lines for the machining and manufacture of 6-speed transmission components. All machines are currently in production and will be available from March 2024. Register for the auction to stay up to date. For more information on bidding and selling, please visit the auction website. Technical data: Birze9ehgd7 Capacity 40 tons, diameter of roller shaft 80 mm, length of roller shafts 250-300 mm, max. roller diameter 320 mm, PLC Siemens S7, LxWxH, approx. 2.5x2x2m (1400047)

more

Listing

Europa

6,478 km

PROFIROLL BAD DUEBEN Rollex L HP

Call

Condition: used, Year of construction: 2011, machine/vehicle number: 0146, rolling capacity max.:2-20 t workpiece diameter:100 mm total power requirement:2 x 8,5 kW weight of the machine ca.:11 t Cjdgdqdeyw dimensions of the machine ca.:7,1 x 5,15 x 3,9 m Description of the manufacturer: The ROLLEX® is more than an innovation offered by Profiroll in the field of Spline Rolling. This flexible machine type enables a rolling of splines onto most different types of shafts. The CNC-control combined with symmetric circular dies allow a manufacturing of splines with highest quality demands. Likewise the ROLLEX® is able to coldform profiles, threads and to perform finishing rolling due to its reliable Profile Rolling process. Circular Die Process circular dies for kinematic rolling with symmetric geometry this correlates to a rolling rack of infinite length a workpiece specific calibration phase achieving least tolerances is the result lowest changeover times due to compact circular dies up to 5 sets of dies mountable in one tooling layout Process description Workpieces are to be positioned inside the work area, clamped between centers. The rolling slide infeed starts whereas the Circular Dies on the slides penetrate the workpiece and coldform the requested spline profile. After forming all profiles the workpiece is getting retracted from work area to be replaced by Operator. Features: special drive chain for spline rolling controlled workpiece acceleration Multiaxes CNC 2-Rolling Slides Graphical user interface Process visualization Data management User guidance machine sizes for different applications HP (High Precision) version with servomechanical drives

more

Listing

MECAN EUROPA Ipematic 525/S (Sägeblatt 525 mm)

Staufenberg

6,818 km

MECAN EUROPA Ipematic 525/S (Sägeblatt 525 mm)

Call

saw blade diameter: 525 mm, cutting capacity: 180 mm, cutting range round at 90°: 180 mm, Condition: used, Year of construction: 1991, Semi-automatic mitre circular sawing machine MECAN EUROPA OMP Italy Type Ipematic 525/S, make # 6291, year of manufacture 1991 Technical data: Birzvxsltjr max. saw blade diameter 525 mm Cutting height 180 mm Cutting height manually adjustable at the front Angle adjustment right 0 - 90 Angle adjustment left 0 - 90 Sawing range adjustment by 145 mm Max. sawing range 90° round 180 mm rectangular 180 x 180 mm flat 360 x 100 mm max. sawing range 45° round 160 mm rectangle 160 x 180 mm flat 300 x 100 mm Spindle speeds 700 - 1400 rpm. Cutting speeds 11 - 22 rpm. Vertical cutting speed 11-22 g/1U Material clamping vertical hydraulic Pole-changing drive motor 2.1/ 3.75 kW Motor power coolant unit 1.1 kW Electrical connection 380 V External dimensions approx. 1200 x 1500 x 2000 mm high Weight approx. 1500 kg With - coolant device - Quantity counter - Control panel on top right of machine - Electronic saw blade protection - vertical long-stroke vice (approach maneuvering with pushbutton and push button and automatic opening of the piston of 5 mm) - hydraulic pump 1.5 HP, hydraulic pressure 10 - 70 bar Used

more

Listing

Emskirchen

6,733 km

Roll Laminator Cold/Hot

GBC Ultima 65

Call

Condition: used, Year of construction: 2018, machine/vehicle number: PGG0734, Rollen-Laminiergerät - Roll Laminator GBC Ultima 65Year 2018 - Serial-No. PGG0734 Formatbreite / Size width max. 650mm Heiß-/Kaltlaminierung / Hot and Cold laminationSpecifications Operation Mode Roll film laminator Heating System 2 heated rollers Laminating Speed (variable) max. 3000mm/min Max. Pouch Thickness max. 2 x 250 micron rolls Photo friendly Warm up Time 10min Power Supply 220/240 V/AC Laminating Thickness max. 6.0mm Laminating Width max. 685mm Anti-Jam Technology 8ubhtb9y0x Manual Reverse Approx. lamination time (A4) 6 secs (A4 75 microns) Dimensions (WxHxD) 889 x 355 x 533mm Weight 62.4Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

more

Listing

Cugir

5,747 km

cold rolling machine

Felss burger Manuelle Rollieranlage

Call

Condition: used, Year of construction: 2011, machine/vehicle number: 10-0680B, Please state your offer price. Price without packaging and transportation; Payment in advance. The hand over will be at our location Bm93bvnt Terms of delivery: EXW Cugir, Romania

more

Listing

Wasbek

6,816 km

KNUTH Werkzeugmaschinen KHK 350

€2,390

Cold/wedge rolling machine

Call

Condition: reconditioned (used), Year of construction: 2018, Affordable circular saw with split vise and pneumatic part clamping. Our complete data sheet with all details and technical data can be found here under Documents as a PDF download. D7qk8ckrv

more

Auction

Nižní Lhoty

6,179 km

Profiroll Rollex HP

61 days left

Details

Condition: good (used), Year of construction: 2011, Functionality: unexamined, Several machines of this type are available. The range includes various production lines for the machining and manufacture of 6-speed transmission components. All machines are currently in production and will be available from March 2024. Register for the auction to stay up to date. For more information about bidding and selling, please visit the auction website. Technical data: Bipjqbe8zeu max. diameter 70 mm, rolling force 20 - 200 kN, rolling spindle diameter/tilting/stroke 120 mm / +/- 3 degrees / 90 mm, center height 200 mm, max. tool diameter 300 mm, workpiece clamping length 180 (300) mm, speeds 0-50 rpm, spindle drive 2 x 5.8kW / 700Nm, CNC Siemens Sinumerk 840D, 400V 55Hz 43kW, space requirement LxWxH 5.6x5x3m, weight 11to

more

Listing

Wiesbaden

6,914 km

KALTENBACH KKS 370

Call

Condition: ready for operation (used), machine/vehicle number: 24017, Functionality: fully functional, disk of circular saw-Ø: 370 mm cutting area at 90° round: 105 mm cutting area at 90° square: 300 x 30 mm cutting area in mitre at 45° round: 105 mm cutting area in mitre at 45° square: 140 x 70 mm cutting speed: 11/22 m/min engine: 380 V, 1,2/2 kW Biqpiwtqckg space needed: 1050 x 1000 x 1650 mm weight: 875 kg

more

Listing

Schwabach

6,707 km

Trennjaeger , ST 251

Call

Condition: good (used), Technical data : Motor power 1.2 / 1.5 kW Saw blade size 275 mm 2 speeds 22 / 44 rpm Mitre angle 45° Dimensions, W x D x H approx. 0.8 x 0.9 x 1.8 m Weight approx. 270 kg . Including : - Additional clamping arm for low-burr cuts - 3 additional used saw blades - Coolant device Binxxpf2voi .

more

Listing

Emskirchen

6,733 km

Roll Laminator Cold/Hot

GBC CATENA 35

Call

Condition: used, Year of construction: 2018, machine/vehicle number: PCG0226, Rollen-Laminiergerät - Roll Laminator GBC Aquila 65Year 2019 - Serial-No. PCG0226 Formatbreite / Size width max. 650mm Heiß-/Kaltlaminierung / Hot and Cold laminationSpecifications Operation Mode Roll film laminator Heating System 2 heated rollers Laminating Speed (variable) max. 3000mm/min Max. Pouch Thickness max. 2 x 250 micron rolls Photo friendly Warm up Time 10min Power Supply 220/240 V/AC Laminating Thickness max. 6.0mm Laminating Width max. 330mm Anti-Jam Technology Manual Reverse Approx. lamination time (A4) 6 secs (A4 75 microns) Dimensions (WxHxD) 685 x 330 x 457mm Weight 37.8kgsOnline-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect D7pwvs0 On Stock Emskirchen / Nürnberg - Can be test

more

Listing

Cugir

5,747 km

cold rolling machine

Felss Stauchen MEC-single

Call

Condition: used, Year of construction: 2017, machine/vehicle number: 16-3715B, Please state your offer price. Price without packaging and transportation; Payment in advance. Gs2vokoy The hand over will be at our location Terms of delivery: EXW Cugir, Romania

more

Listing

Wasbek

6,816 km

KNUTH Werkzeugmaschinen KHK 350

€2,490

Cold circular saw can be swiveled 60°

Call

Condition: reconditioned (used), Year of construction: 2019, Affordable circular saw with split vise and pneumatic part clamping. Our complete data sheet with all details and technical data can be found here under Documents as a PDF download. Iv7n99fi

more

Listing

Wiefelstede

6,930 km

Berg & Schmid VKS 315

Call

Condition: used, Year of construction: 2010, Cold circular saw, metal circular saw, metal crosscut saw, miter saw -Manufacturer: Berg & Schmid, cold circular saw metal circular saw type VKS 315 -Motor: 1.5/1.8 kW / 1400/2840 rpm -Saw blade: Ø 295 mm / max. Ø 315 mm, swiveling -Mitre: left 60° and right 45° -Cutting height: max. 130 mm -Cutting width: max. 160 mm -Cutting speed: speed 33/66 rpm -Vice: Double clamping arm for low-burr cuts with quick lateral movement -Coolant device: Bipugsomehs -Dimensions: 780/700/H1700 mm -Weight: 373 kg

more

Listing

Iserlohn

6,958 km

1-Clamp Perfect Binder Cold Glue

KALTENBACH MSK 400

€3,200

ONO plus VAT

Call

Condition: good (used), Year of construction: 1976, Semi-automatic cold circular sawing machine KALTENBACH Type : MSK 400 Year 1976 with roller table. Cutting range E8k28wzsf Round mat. max: 135 mm Flat mat. max : 200 X 80 mm Machine in good condition, operating instructions available.

more

Listing

Peetri

6,058 km

cold saw

IMET GBS 185

Call

Condition: new, Manual bandsaw or with gravity lowering mitre cutting from 0° to 60° left. Vice with quick clamping. Easy stops at 0°, 45° and 60° left, graduated plate to identify different angles. Adjustment of the blade tension from the front side of the sawframe, checked by an end-stroke. Band guides with bearings for blade alignment, pulleys with 260 mm diameter. Start-button inside the handle. Floor stand with door and room inside. Cast iron sawframe inclined to 42°, in order not to strain excessively the blade. Bzre9aeldi High tension blade 1000 kg/cm², through front screw, which allows a greater cutting accuracy and a bigger execution speed. Cutting capacity at 90° round till 185 mm., square till 180 mm. and rectangular till 200 x 150 mm.

more

Listing

Emskirchen

6,733 km

Müller Martini Econobinder EB II

Call

Condition: used, Year of construction: 1973, machine/vehicle number: 4700.1, 1-Zangen Klebebinder Kaltleim - 1-Clamp Perfect Binder Cold Glue Müller Martini Econobinder EB IIYear 1973 - Serial-No. Serien-Nr. 4700.1 Speed (mechanic) 800-2400 tact/hour Format min. 90 x 60 x 3mm without cover Format min. 90 x 80 x 3mm with cover-Online-Video-Inspection by Skype-Video- B98qovuxsz -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nürnberg - Can be test-

more

Listing

Wijchen

(dealership location)

7,087 km

Veneer press door press Cold Italpresse BN-25-F

Italpresse BN-25-F

Call

Condition: used, Cold Veneer Press Italpress BN-25-F Press surface 2500x1200mm Crsgkcb Max opening 480mm 4 cylinders380V

more

Listing

Staufenberg

6,878 km

EXCELLO XK 275

Call

Condition: used, Year of construction: 2001, machine/vehicle number: 109956, workpiece diameter:38 mm workpiece length:500 mm rack milling length - max.:610 mm profile width:92 mm module range:0,3-1,3 slide stroke:760 mm drive motor: kW electrics - voltage/frequency:380/50 V/Hz Crxc3f2rje total power requirement:24 kW weight of the machine ca.:10 t Spline/cold Rolling Machine EX-CELL-O XK 251 with automatic loading device FELSOMAT PE03, fitted in 1999 and tailstock. A cold rolling machine, intended for non-cutting shaping of profiles, such as plug type gearing (straight or diagonal), spiral gearing, oil grooves

more

Listing

Freising

6,652 km

Cold sterile filtration

Pall GmbH

Call

Condition: used, Year of construction: 1995, Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Permissible operating temperature: 105 °C Volume: 1456 l Current: 10 A Voltage: 220 V Water: cold water: min. 150 hl/h; hot water (max 65 °C): min. 150 hl/h Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Weight: 3450 kg Cf0w7zq0k2 Base construction: basic frame with control and measuring components and filter container; cleaning module Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet The Pall CFS system is designed as a single unit and can be installed directly in front of the filling line without the need for a buffer system. It is a completely independent process unit consisting of the following components: filter vessel Piping and connections Membrane cleaning system (CIP) integrity check Switchboard The hygienic design, the simple integrity test and the full automation ensure the microbiological safety of the system and usually allow the operation of the filling staff. Cluster filtering groups filter elements into clusters. Each cluster has its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization and integrity testing are performed per cluster. Advantages of the CFS principle; Longer life Integrity testing on site Integrity diagnostics per cluster Special rinsing High specific flow rate Short flush times Constant flow in all candles Minimal water consumption Quick replacement of filter elements Controlled backwash Minimal beer loss High biological safety Constant availability With this filter system only preclarified products may be filtered, which have normally filterable properties in their composition.

more

Listing

Wasbek

6,816 km

KNUTH Werkzeugmaschinen KHK 350

€2,690

Krones Topmatic Cold Glue Labeler (2001)

Call

Condition: reconditioned (used), Affordable circular saw with split vise and pneumatic part clamping. Sccqbaslc Our complete data sheet with all details and technical data can be found here under Documents as a PDF download.

more

Listing

Menslage

(dealership location)

6,942 km

Krones Kaltleimetikettierer

Call

Condition: used, Year of construction: 2001, Overview The machine was manufactured in 2001 by the German company Krones. The Topmatic was completely overhauled and equipped with new dosing units. This machine can be put into operation immediately. Technical data Capacity: 30.000 revolutions per hour Running direction: RM left run Feeding: Normal from left (in) to right (out) Cold glue unit: PWL 370 and PWL 300 PSL aggregate 3 x PSL aggregate Bottle table: Servo controlled Guide: Linear Label L=: min. 40mm, max. 130mm Bottle diameter: min. 50mm, max. 110mm Bottle height (H): min. 150mm, max. 350mm Voltage: 230/400V Electricity: 3PH/PEN Rated frequency: 50 Hz Control voltage: 24 V Label: paper label: body, neck and back, PSL: 3 labels Machine dimensions: L=2400 W=1950 H=2300 Cbpprc3x

more

Listing

Wiener Neudorf

(dealership location)

6,311 km

Cold Circular Saw

IMET Record 350

€5,101

EXW ONO plus VAT

Call

Condition: new, Year of construction: 2022, neu 2022 6232 prompt, Zwischenverkauf v Italien Bymnfyzw 5101 105.59 1 350 mm 350 x (2)2,5 x 32 mm 30/60 U/Min 45 ° 45 ° rund 125 mm, Quadratprofi rund 105 mm, Quadratprofi rund 70 mm, Quadratprofil 1,8/2,5 kW 600 mm 1220 mm 1060 mm 206 kg very robust construction suited to cut metal profiles and solids (steel with resistance up to 70 kg/mm²) vice with quick clamping device and additional clapming strip for reduced cuttinag burr reduction gear and clutch to save the gear and sawing blades coolant equiptment sawing blade protection material stop thermic and magnetic motor protection 90° longitudinal cuts are possible thanks to the rotating vice pedestal 1 saw blade users manual in GERMAN

more

Listing

Hessisch Lichtenau

6,811 km

Cold circular mitre saw

KALTENBACH KKS 400 NA

€5,000

Call

Condition: used, Year of construction: 1983, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Qq8lgjs2 Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

more

Listing

Staufenberg

6,878 km

EXCELLO XK 275

Call

Condition: used, Year of construction: 2004, machine/vehicle number: 109987, workpiece diameter:38 mm workpiece length:500 mm rack milling length - max.:610 mm profile width:92 mm module range:0,3-1,3 slide stroke:760 mm drive motor: kW electrics - voltage/frequency:380/50 V/Hz total power requirement:52 kW weight of the machine ca.:10 t Cii73esszl Spline/cold Rolling Machine EX-CELL-O XK 251 with automatic loading device FELSOMAT PE03, fitted in 1999 and tailstock. A cold rolling machine, intended for non-cutting shaping of profiles, such as plug type gearing (straight or diagonal), spiral gearing, oil grooves

more

Listing

Freising

6,652 km

Cold sterile filtration

Pall GmbH

Call

Condition: used, Year of construction: 2001, Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Permissible operating temperature: 105 °C Volume: 1456 l Current: 10 A Voltage: 220 V Water: cold water: min. 150 hl/h; hot water (max 65 ° C): min. 150 hl/h Cooy2doy Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Weight: 3450 kg Base construction: basic frame with control and measuring components and filter container; cleaning module Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet The Pall CFS system is designed as a single unit and can be installed directly in front of the filling line without the need for a buffer system. It is a completely independent process unit consisting of the following components: filter vessel Piping and connections Membrane cleaning system (CIP) integrity check Switchboard The hygienic design, the simple integrity test and the full automation ensure the microbiological safety of the system and usually allow the operation of the filling staff. Cluster filtering groups filter elements into clusters. Each cluster has its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization and integrity testing are performed per cluster. Advantages of the CFS principle; Longer life Integrity testing on site Integrity diagnostics per cluster Special rinsing High specific flow rate Short flush times Constant flow in all candles Minimal water consumption Quick replacement of filter elements Controlled backwash Minimal beer loss High biological safety Constant availability With this filter system only preclarified products may be filtered, which have normally filterable properties in their composition.

more

Listing

Wasbek

6,816 km

KNUTH Werkzeugmaschinen KHK 350

€2,390

Cold Forging Press Boltmaker

Call

Condition: reconditioned (used), Affordable circular saw with split vise and pneumatic part clamping. Our complete data sheet with all details and technical data can be found here under Documents as a PDF download. L72swfiycz

more

Listing

Schwabach

6,707 km

Cold saw

Trennjaeger VC 320

Call

Condition: used, machine/vehicle number: IA2060, Technical data : . Saw motor, pole-changing approx. 1.0 / 1.8 kW Saw blades 360 mm 6 cutting speeds : 16 / 20 / 25 m/min 32 / 40 / 50 m/min . . Lr2vtxhvyt

more

Listing

Wiener Neudorf

(dealership location)

6,311 km

Cold Circular Saw

KASTO KASTO GKS 400 U

€5,800

EXW ONO plus VAT

Call

Condition: used, Year of construction: 1991, gebraucht 1991 6243 prompt, Zwischenverkauf v Deutschland 5800 1 400 mm Hvrtz9h 0 - 60 ° 0 - 90 ° rund 130 mm, rechteck 240 10 mm 10 mm 10 - 20 mm 1050 mm 1,6/2,5 kW 1230 mm 1205 mm 1980 mm 1160 kg 5 kW 11 - 22 m/min rund 130 mm, rechteck 180 rund 90 mm, rechteck 130x For straight and mitre cuts Hydraulic vertical and horizontal vice Table rotation range 150° with Saw blade, (HSS Saw blade 400 x 3 x 40 mm 180Z, Split 7, Pin 12 mm) User manual in German COMPLIES WITH GERMAN UVV & AUSTRIAN AMVO

more

Listing

Korschenbroich

7,032 km

HATEBUR BKA 3

Call

Condition: excellent (used), Year of construction: 1976, Multi-stage cold press with a shearing device and four successive press stations 7f9utmvwu

more

Listing

Butzbach

6,882 km

Cold circular saw aluminum

ZF 3 M 2211

Call

Condition: used, Year of construction: 2004, machine/vehicle number: 3M22 11 2130, rolling capacity max.:6,1 t Sw2ru8 workpiece diameter:160 mm workpiece length:25 mm total power requirement:14 kW weight of the machine ca.:4000 kgs dimensions of the machine ca.:2,5 x 2,5 x 2,1 m Internal rolling machine for transmission shift sleeves

more

Listing

Enschede

7,014 km

Aluminium afkortzaagmachine TOSMACH

Call

Condition: good (used), - Saw blade 500 mm Dja7zf - Double miter - 4 pneumatic clamps - protective cap - 400V

more

Listing

Wijchen

(dealership location)

7,087 km

Veneer press door press Cold Orma S6 3000x1300mm

Orma S6

Call

Condition: used, Year of construction: 1996, Cold veneer press Press surface 3000x1300mm Opening 500mm 6 cylinders 380V 30T Joejosjm Total dimensions 3500x1500x1800mm (LxWxH), weight +/- 1500kg.

more

Listing

Hydraulic Press For Engineered Flooring Deck Art CP 300/2500(3800) MK3 Digital

Vrbas

6,028 km

Cold Press for Multi layer Parquet

Hydraulic Press For Engineered Flooring Deck Art CP 300/2500(3800) MK3 Digital

Call

Condition: new, Year of construction: 2023, Introducing Deck Art Machines Digital Flooring Press: Our Cold Hydraulic Gluing Press MK3 Digital Series is more than a machine – it's a testament to engineering excellence. Created specifically for the engineered flooring landscape, these machines encapsulate efficiency, precision, and simplicity in one sleek package. Dive into a realm where every output is nothing short of perfection. Standout Features: • Intuitive Operation: Navigate seamlessly with a 15'' touchscreen interface. • Precision Guaranteed: Digital pressure monitoring ensures immaculate lamination each time. • Adaptive Pressure Mechanism: Modify pressure settings to suit varying flooring dimensions. • Automated Mastery: Automatic pressure adjustments and clamp releases to enhance workflow. • Eco-Driven Performance: Our hydraulic pump prioritizes power efficiency without compromising on performance. • Stay Connected: Remote online control and diagnostics to keep your operations smooth. • Versatility in Gluing: Multiple gluing cycles, complemented with stop valves for varied flooring lengths. • Consistency in Every Press: Self-aligning plates and hydraulic beams ensure every lamination is impeccable. • Adjustable Back Supports: Our specially designed back supports keep the material centered, enabling even pressure distribution for different flooring widths on a single press. • Motorized Conveyor System: The built-in motorized conveyor system effortlessly transports material from the glue spreading machine to the press, with digitally controlled speed for precise operation. For those who envision the future of flooring, the Deck Art Machines Digital Flooring Press is your answer. Join hands with us, and let's shape the flooring industry's next chapter together. - Max gluing widths - 310 mm (Up to 500 mm upon order) - Max gluing length - 2560 mm to 7680 mm (Unlimited upon order) - Max gluing height - 800 mm - Working height - From 800 to 850 mm - No of pressing cylinders (total) - From 16 to 24 pcs (Unlimited upon order) - No of independent pressing cycles - From 4 to 8 cycles (unlimited upon order) - Pitch between pressing cylinders - 320 mm - Each cylinder has its own stop valve - Yes C8ten7xxm - Single stroke - 80 mm - Single cylinder pressure - 9.100 kg - Cylinder pressure in total - From 145.600 kg - 218.400 kg (Unlimited upon order) - Working pressure - Adjustable - Max working pressure - From 14 kg/cm2 (For 200 mm width) to - 10 kg/cm2 (For 300+ mm width) - Pressing plate type - Self Aligning! - No of front aligning beams - 4 pcs (Unlimited upon order) - Front beams type - Hydraulic - Front Beam Pressure - Up to 1000 kg; adjustable - Max system pressure - 18 Mpa - Motorized material transfer conveyor - Yes, on both sides, independent - Speed of material transport - Up to 30 m/min - Speed regulation of transfer conveyor - Yes, both sides, independent - Power of hydraulic pump - 5.5 kW (1 pc) - Power of motor for transportation - 2x0.18 kW - geared - Voltage - 3x400v/50 Hz - Electricity protection IP 54 Apart from our standard models of presses, depending on the buyer's needs and budget, we are able to offer you custom-designed, bespoke presses with various parameters. (Either one-sided or two-sided presses; up to 500 mm max gluing width; unlimited max gluing lengths;...) Feel free to contact us for more information! Deck Art Machines

more

Listing

Wiener Neudorf

(dealership location)

6,311 km

Cold Circular Saw

IMET Sirio 370

€5,600

EXW ONO plus VAT

Call

Condition: used, Year of construction: 2021, gebraucht 2021 6222 prompt, Zwischenverkauf v Italien 5600 1 370 mm 370 x 3,0 x 40 mm 15/30 U/Min 60 ° 45 ° rund 120 mm, Quadratprofi rund 120 mm, Quadratprofi rund 120 mm, Quadratprofi 2k3tpqis rund 110 mm, Quadratprofi mm 925 mm 1,5/2,2 kW 810 mm 1020 mm 1850 mm 390 kg DEMO MACHINE / MINT CONDITION circular saw to also cut high strength steels linear guide of sawinghead with manual feed by hand lever manual machine vice, moveable sideways with additional clamping strip for reduced cutting burr coolant equipment sawing blade protection material stop extractable chip drawer chip brush stopr at 0° and 45° left and right thermic motor protection user manual in GERMAN 1 saw blade

more

Listing

Wiefelstede

(dealership location)

6,929 km

Cold storage lock

STUV 3.16.416.2 Links

€75

Call

Condition: used, Cold room lock, cold room lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock unused in original packaging -Type: 3.16.416.2 Links Bh9veuusvad -Quantity: 10x door lock available -Price per piece -Dimensions of box: 260/150/H40 mm -Weight: 1.1 kg/pc.

more

Listing

Scerne

6,455 km

Cold press

Italpresse

€1,000

Langguth E206 Cold Glue Labeler (2004)

Call

Condition: good (used), Cold press 2vdzz3 Plaen dimension : 2200 mm x 1000 mm

more

Listing

Menslage

(dealership location)

6,942 km

Langguth Kaltleimetikettierer

Call

Condition: used, Year of construction: 2004, Overview The machine was built in 2004 by the German manufacturer Langguth and is completely overhauled. The pictures do not correspond to the actual machine, but are well comparable and representative. Technical data Gluing height up to 210mm Completely overhauled as shown on the pictures, but with base frame made of steel. Including 2 bottle formats+ 2 label formats Optional with take off turntable Dkdxqh

more

Listing

Wijchen

(dealership location)

7,087 km

Circular Cold saw, Saw machine Eisele VA-L 094,

Eisele VA-L 094

€2,900

ONO VAT not applicable

Call

Condition: used, Year of construction: 1989, Circular Cold saw, Saw machine Model: Automatic Manufacturer:&nbsp Eisele Type: VA-L 094 Cw9pkpiwzy Saw-diameter:&nbsp 350mm Capacity:&nbsp 115mm Material-length: 5-600mm Machine-dimensions: 1850x1150x1750

more

Listing

Oberrohrdorf

6,906 km

FOM 40_Panda 400

Call

Condition: ready for operation (used), Year of construction: 1996, machine/vehicle number: 004408, Code: XZ 10084 Connection: 380 V / 50 Hz Melpee9pk9 Speed: 3500 rpm Country of origin: Italy

more

Listing

Mörsdorf

6,664 km

Cold saw

MEP Falcon 315

Call

saw blade diameter: 315 mm, cutting capacity: 110 mm, overall weight: 250 kg, Condition: used, Cross-cut saw MEP type Falcon 315 Serial # 131290/19 G Lbfyqdxmdz Saw blade diameter 315 mm Cutting capacity: square at 90° 8 5x 85 mm round at 90° 110 mm flat at 90° 120 x 70 mm square at 45° 70 x 70 mm round at 45° 90 mm flat at 45° 85 x 60 mm 2 saw blade speeds 30 + 60 rpm Total power requirement 1.85 kW Machine weight approx. 250 kg External dimensions L x W x H approx. 1000 x 1000 x 1500 mm With - saw blade - base frame - pneumatic workpiece clamping used, in good condition

more

Listing

Wiefelstede

(dealership location)

6,929 km

Cold storage lock

STUV 3.16.416.1 KRT Schloss V2A

€75

Call

Condition: used, Cold room lock, cold room lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock unused in original packaging -Type: 3.16.416.1 KRT lock V2A -Quantity: 6x door lock available -Price per piece -Dimensions of box: 260/150/H40 mm -Weight: 1.1 kg/pc. Cb9qbyg

more

Listing

Lambsborn

6,970 km

Cold saw

Eisele VMS 3-s / 430

€2,800

Anker - Cold Glue Labeler (1999)

Call

Condition: excellent (used), Cross-cut saw with roller conveyor Type VMS3 430 2 speeds Bh0cailxveu year of construction 1984 Saw blade 325/350 Ø 200 x 90 mm Cutting range approx. 550 kg Roller conveyor 4000 mm left, 6000 mm right of fence

more

Listing

Menslage

(dealership location)

6,942 km

Anker Kaltleimetikettierer

Call

Condition: used, Year of construction: 1999, Overview The machine was built in 1999 by the German manufacturer Anker and is overhauled. The machine has run only a few hours a year and is therefore in good condition. Technical data Front label (belly+ chest wet glue), back label (wet glue) Running direction: right - left Complete documentation With a new bottle format and 2 new label formats Freely selectable label dimensions Efr9uvyk

more

Listing

Wijchen

(dealership location)

7,087 km

Veneer press door press Cold Schubert 1300x1800mm

Schubert HHM3

€1,950

ONO VAT not applicable

Call

Condition: used, Veneer press Schubert HHM3 Cvvas9cagt Press dimensions 1300x1800x600mm Transport dimensions: 2500x1400x2540mm, weight 1000kg

more

Listing

Rietberg

6,907 km

Fixed price VAT not applicable

Trennjaeger ST 251/256

€200

Call

Condition: ready for operation (used), The machine is in operation. Dmdjfn

more

Auction

Ulm

6,783 km

Cold Storage

52 days left

Details

Listing

Wiefelstede

(dealership location)

6,929 km

Cold storage lock

STUV 3.16.415.2 Links

€75