Used Cold Pilger Rolling Mill for sale (17,706)

Year of construction: 2015, condition: good (used), Carl Wezel Cold Rolling Mill BW500/420 – Refurbished Strip Rolling Mill Carl Wezel Cold Rolling Mill BW500/420, refurbished strip rolling mill Manufacturer: Carl Wezel Maschinen- u. Werkzeugfabrik Model: BW500/420 Year of manufacture: 1975 Machine type: Cold rolling mill / Strip rolling mill Modernisation: Bühler-Würz Kaltwalztechnik GmbH Type: Wezel rolling mill Year of modernisation: 2015 Operating voltage: 3AC 400 V Frequency: 50 Hz Ledsyvgi Sepfx Abcjhd Total connected load: 25 kVA Total current: 36 A Control voltage: DC 24 V

Year of construction: 1975, condition: excellent (used), daylight width: 70 mm Lodpfx Aep E Efvobcohd speed: approx. 15 m/min working direction: any work roll diameter: 80 mm

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm speed: approx. 25 m/min working direction: any work roll diameter: 120 mm barrel length: 150 mm Lodop E Eglspfx Abcohd backup rolls: backup block/chain

Condition: excellent (used), strip width: 6 - 200 mm strip thickness: 6 – 0,5 mm speed: max. 100 m/min working direction: any Ledep E Ed Ropfx Abcohd work roll diameter: 250 mm barrel length: 250 mm roll core for rolling rings: 190 mm

Condition: good (used), Year of construction: 2008, functionality: fully functional, filling opening width: 1,400 mm, total width: 4,950 mm, total height: 4,443 mm, total length: 8,093 mm, type of input current: three-phase, stroke length: 60 mm, For sale is a used but technically well-maintained machine, which was in reliable operation until the end of June 2024. The machine is in full working order and is ideally suited for immediate re-use or as a solid base for custom modifications. Technical Features & Equipment: Modern belt feed The machine is equipped with a contemporary belt feed system, ensuring efficient and precise material handling. Drive couplings with bell-type sleeves Robust bell-type sleeves in the drive couplings provide reliable power transmission – easy to maintain and built for longevity. Large couplings, final stage version The machine is already fitted with the upgraded large-size couplings according to the latest machinery specification, offering enhanced stability and performance. Standardized compaction units The installed compaction units meet current industry standards, delivering consistent and powerful processing. Lhjdswzkuzepfx Abced Kneading rollers – good profile, used condition The kneading rollers are in a used but fully functional condition, with good tread profile remaining. Conveyor belts – used, but in good condition The conveyor belts show typical signs of wear but remain fully functional and well-preserved. Note: The Makrolon viewing windows should be replaced as they display age-related signs of use. The machine is currently dismantled but can be inspected on site. This machine offers an excellent combination of reliability and modern technology, ideal for operations seeking a proven solution with up-to-date equipment features. For further questions or to arrange a viewing appointment, please do not hesitate to contact us.

Condition: used, Year of construction: 1991, functionality: fully functional, total height: 3,888 mm, total length: 10,207 mm, total width: 4,498 mm, type of input current: three-phase, filling opening width: 2,200 mm, stroke length: 60 mm, For sale is a used but technically well-maintained machine, which was reliably in production operation until the end of June 2024. Despite its age, it still provides a solid foundation for use in manufacturing applications. Technical Details and Features: Year of manufacture / Last use: In production until the end of June 2024 Control system: Original condition, fully functional Condition: Used, but in good technical condition Strip feeder: Modern strip feed for efficient material handling Drive: Equipped with robust drive couplings Clutches: Fitted with large clutches featuring cup seal technology, as found in the latest machine design – ensuring reliable power transmission Compaction: Compaction units correspond to proven standard design Crimping rollers: Used profile and condition, but well maintained – no major damage Conveyor belts: Used, but in working condition Viewing panels: Made from Makrolon, should be replaced Lhjdpfowzk Alox Abcsd The machine is currently dismantled but can be inspected. Summary: This machine is ideally suited for companies seeking proven and reliable technology at an attractive price. Thanks to the modern strip feed and up-to-date clutch technology, efficient production processes remain possible. With manageable maintenance requirements (e.g. replacement of the Makrolon panels), the machine can be quickly integrated into existing production lines. Inspection by appointment possible.

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Lhodpfxeh A S Hts Abcsd Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: used, Year of construction: 2000, functionality: fully functional, 1x Used Bühler MDDL / MDDK Rollers are worn and can be re-grooved at an additional cost. Ljdpfxjyudt Ns Abcshd Complete mill is already dismantled. Includes 4 drive motors. Spare parts can be supplied at extra cost.

Condition: used, Year of construction: 2018, Rollen-Laminiergerät - Roll Laminator GBC Ultima 65Year 2018 - Serial-No. PGG0734 Formatbreite / Size width max. 650mm Heiß-/Kaltlaminierung / Hot and Cold laminationSpecifications Operation Mode Roll film laminator Heating System 2 heated rollers Laminating Speed (variable) max. 3000mm/min Max. Pouch Thickness max. 2 x 250 micron rolls Photo friendly Warm up Time 10min Power Supply 220/240 V/AC Laminating Thickness max. 6.0mm Laminating Width max. 685mm Anti-Jam Technology Manual Reverse Approx. lamination time (A4) 6 secs (A4 75 microns) Dimensions (WxHxD) 889 x 355 x 533mm Weight 62.4 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Lsdpfx Aemk Nc Dobcohd On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2018, Rollen-Laminiergerät / Roll Laminator Cold/Hot GBC CATENA 35Year 2019 - Serial-No. PCG0226 Formatbreite / Size width max. 650mm Heiß-/Kaltlaminierung / Hot and Cold laminationSpecifications Operation Mode Roll film laminator Heating System 2 heated rollers Laminating Speed (variable) max. 3000mm/min Max. Pouch Thickness max. 2 x 250 micron rolls Photo friendly Warm up Time 10min Power Supply 220/240 V/AC Laminating Thickness max. 6.0mm Laminating Width max. 330mm Anti-Jam Technology Manual Reverse Approx. lamination time (A4) 6 secs (A4 75 microns) Dimensions (WxHxD) 685 x 330 x 457mm Weight 37.8kgs Online-Video-Inspection by Skype-Video Ljdpjmk Nc Iefx Abcehd We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1998, condition: ready for operation (used), A hydraulic 3-roll plate rolling machine Omcca is available. Working length: 2050mm, max. plate thickness rolling/pre-bending: 8mm/6mm, roll diameter: 200mm. Machine dimensions X/Y/Z: approx. 3200mm/900mm/1500mm, weight: approx. 3300kg. On-site inspection is possible. Lhodpfoycwrzjx Abcod

Year of construction: 1974, condition: ready for operation (used), A Schwabenthan laboratory rolling mill is available. Roll width: 110mm, roll length: 350mm, roll diameter: 110mm, roll speed: 27rpm, bottom-roll axle distance: approx. 1200mm. On-site inspection is possible. Ljdewmqw Tepfx Abcohd

Year of construction: 1973, condition: ready for operation (used), A Troester mixing mill is available. Including strip cooler, year of manufacture: 1993. An on-site inspection is possible. Lhsdpfsxdc Uisx Abcsd

Condition: ready for operation (used), A two-roll plate rolling machine Fasti is available. Roll diameter: 130mm, working width: 2150mm, max. sheet thickness: 3.5mm. Machine dimensions X/Y/Z: approx. 2900mm/650mm/1100mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Ledpsx U Dwvefx Abcehd

Condition: used, Year of construction: 2016, Technical details: Lsdjudf Evopfx Abcjhd weight: 22 t

Condition: excellent (used), Vollmer rolling mill Model: VWM 40U Lsdpsmxi Swofx Abcohd A rolling mill for gang saws In good condition.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1974, power: 450 kW (611.83 HP), workpiece diameter (max.): 21 mm, total length: 30,000 mm, ROLLING MILL - 2 rolling pass - power 450 KW - raw material: wire road low carbon dimensions from fi 5.00 to fi 21.00 mm - capacity depending on the size of 1200 kg/h - finished products: flat bars from 8x2 to 30x3 mm round bars from fi 5 to fi 16 mm square bars from 5x5 to 14x14 mm triangle bars from 10x10 to 20x20 mm Ljdpfox I Nbmsx Abcehd angle bars from 10x10x2 to 20x20x3 mm equal angle bars from 15x10x2 to 20x12x4 mm If you have additional questions or need more information, feel free to send us a message or call us.

Condition: new, Year of construction: 2025, Walec mechaniczny W11G 1,2x1530 Napęd mechaniczny, wbudowany w 3 cylindryczne, specjalne opcje do obróbki cienkich blach. Dane techniczne: Model `` W11G 1,2x1530 Marka ACL firmy ANFAN Moc silnika, kw, 1.5 Maksymalna grubość blachy (mm), mm, 1,2 Lsdpfsfwxunex Abcjhd ilość walców, szt,, 3 Długość, mm, 2700 Szerokość, mm, 600 Wysokość, mm, 900 Waga, kg, 500

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Lhjdpjt Hw D Defx Abcsd Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 109987 - 2800015, workpiece diameter (max.): 38 mm, workpiece length (max.): 500 mm, stroke length: 1,950 mm, Suitable for chipless cold forming of profiles such as splines (straight or helical), spiral gears, oil grooves, CV joints, threads and knurls TECHNICAL DETAILS Workpiece diameter: 38 mm Workpiece length: 500 mm Rack length – max.: 610 mm Max. slide stroke: 1,950 mm Max. rolling bar length: 1,400 + 330 mm Max. profile external diameter (standard): 60 mm Max. profile width (standard): 175 mm Rollable profiles for involute gears (module range): 0.3–2.0 MACHINE DETAILS Machine weight: 10 t Total power requirement: 52 kW Current type: 3 Ph Frequency: 50 Hz Operating voltage: 400 V Rated current: 99 A Overall width: 5,014 mm Machine width: 4,560 mm Depth without boom: 2,541 mm Depth with boom: 4,165 mm Height: 2,100 mm Total weight (without automation): 14,500 kg Ledpswm Hqvofx Abcjhd Drive power: 45 kW Hydraulic tank capacity: 1,000 l EQUIPMENT - Machine in horizontal design - Complete enclosure - Tailstock - Hydraulic system - Oil system

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 109853 - 280028, workpiece diameter (max.): 38 mm, workpiece length (max.): 500 mm, TECHNICAL DETAILS EX-CELL-O Cold Rolling Machine with Felsomat (1999) Design: Horizontal Area of application: Chipless cold forming of profiles such as splines (straight or helical), spiral gears, oil grooves, CV joints, threads, and knurls Workpiece data Workpiece diameter: 38 mm Workpiece length: 500 mm Profile width: 92 mm Profile outer diameter (standard): 50 mm Profile width (standard): 125 mm Rollable profiles for involute gears: 0.3 - 1.25 m Rolling bar length: 610 mm Travel movements Slide stroke: 760 mm Cycle times Tailstock forward (at approx. 300 mm stroke): 1.0 s Rolling bars forward: 3.0 s Tailstock retraction (at approx. 300 mm) Stroke): 1.5 s Rolling bars return: 3.5 s Loading/unloading (manual): 5.0 s Cycle time: 14.0 s Gear cuts/hour at 100% Ne: 260 Ledpfx Aswmb Trebcohd MACHINE DETAILS Overall width: 5,014 mm Machine width: 2,360 mm Depth without boom: 2,541 mm Depth with boom: 4,165 mm Height: 2,100 mm Machine weight: 10 t Electrical design – Voltage/Frequency: 380/50 V/Hz Total power requirement: 24 kW Drive power: 22 kW EQUIPMENT - Complete enclosure - Tailstock - Hydraulic system - Oil system

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 109 956, workpiece diameter (max.): 38 mm, workpiece length (max.): 500 mm, TECHNICAL DETAILS Workpiece Rack Length: max. 610 mm Workpiece Diameter: 38 mm Lodpfxswx H R Tj Abcshd Module Range: 0.3 – 1.3 Max. Slide Stroke: 1130 mm Max. Rolling Bar Length: 915 mm Max. Profile Outer Diameter (Standard): 50 mm Max. Profile Width (Standard): 125 mm Gear Cutting (Rollability): 0.3–1.25 Machine Cycle Times Tailstock forward (approx. 300 mm stroke): 1.0 s Rolling bars forward: 4.2 s Tailstock return (approx. 300 mm stroke): 1.5 s Rolling bars return: 4.8 s Loading/Unloading (manual): 5 s MACHINE DETAILS Weight & Dimensions Total Weight (without automation): 12,200 kg Overall Width: 5,014 mm Machine Width: 3,104 mm Depth without cantilever: 2,564 mm Depth with cantilever: 4,166 mm Hydraulic System Hydraulic Tank: 1,000 l Hydraulic Operating Pressure: 80 bar Electrical Equipment Operating Voltage: 400 V / 3 phases Frequency: 50 ±1 Hz Coolant System Tank Capacity: 260 l Pump Pressure: 3 bar Pump Flow Rate: 24 l/min Cooling Water Supply for Hydraulic Tank (Quantity): 10 l/min Cooling Water Connection for Hydraulic Tank (Temperature): 20 °C EQUIPMENT Full enclosure included Tailstock included Hydraulic system included Oil system included

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, workpiece diameter (max.): 160 mm, rotational speed (max.): 300 rpm, workpiece length (max.): 25 mm, TECHNICAL DETAILS Description: Hydraulic internal rolling machine for tapered or cylindrical back rolling of profiles on sliding sleeves, sliding gears, or similar parts. Workpiece Data Workpiece diameter: 160 mm Workpiece length: 25 mm Workpiece internal gearing, adjusted approx.: 85 mm Workpiece external: 75 - 140 mm Workpiece width approx.: 16 - 36 mm Workpiece external pressure ring, adjusted: 160 mm Travel and setting data Maximum travel of the rolling carriage: 60 mm Center distance between workpiece and rolling wheel: 22 mm Rolling wheel speeds, continuously adjustable: 30 - 300 rpm Rolling pressure, continuously adjustable (at 100 bar): 6.1 t Control system: SIEMENS PLC Monitoring control: LAUER PCS 900 / BRANKAMP C 90 with screen display MACHINE DETAILS Machine weight approx.: 4,500 kg Lsdpfx Abswmb Rkocjhd Space required approx.: 2.5 x 2.5 x 2.1 m Spindle drive approx.: 6 kW Total drive: 14 kW Total power requirement: 14 kW Operating voltage: 400 V Frequency: 50 Hz EQUIPMENT - Workpiece carousel loading device for 18 workpieces with workpiece inspection station - Workpiece transport device - Changeover time to a different workpiece size: 30 min / Machining time per workpiece approx.: 25 s - Workpiece storage for intermediate storage - Separate hydraulic system - Separate control cabinet - Coolant system Note: Working areas are approximate and depend on the workpiece and tool conditions.

Year of construction: 1998, condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 Ljdpfx Asfnk Ehebcshd New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Capacity: Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Technical Data Grinding/Workpiece Diameter: up to approx. 300 mm (partially up to 350 mm) Grinding Length/Stroke: approx. 550 mm (slide travel) Module range (for hobbing cutter resharpening): min. module approx. 0.5 to max. module approx. 25 Number of flutes: typically 1–99 pieces (depending on tool set) Grinding wheel diameter: approx. 150–300 mm Grinding wheel speed: up to about 2,700 rpm Centre distance (workpiece spindle): typical range 400–800 mm Swivel/Pitch range: e.g. grinding wheel head swivel 0–15° Machine weight and space requirement: approx. 4.2–4.9 t weight; space approx. 3 × 2.6 × 2.3 m Lsdpjxtiunefx Abcshd Electrical data: operating voltage e.g. 380 V three-phase, control 24 V, auxiliary voltage 220 V