Used Cold Water for sale (8,361)

Condition: used, functionality: fully functional, mileage: 34,000 km, power: 161.81 kW (220.00 HP), axle configuration: 4x4, fuel: diesel, Year of construction: 1995, Equipment: additional headlights, all wheel drive, trailer coupling, Are you looking for a reliable and affordable emergency vehicle for your fire department? Then you have come to the right place! From our immediately available stock of used vehicles, we offer: Water Tank Firefighting Vehicle TLF 16/25 ALL-WHEEL DRIVE 4x4 Magirus on IVECO 135E22 The TLF 16/25 is the proven combination of the advantages of crew fire engines and water tank firefighting vehicles. With a squad crew and ample space for firefighting and rescue equipment, the vehicle is prepared for most operational scenarios. General Data: • Year of manufacture: 1995 • Mileage: approx. 34,000 km Chassis: • IVECO 135E22 4x4 with 220 HP (159 kW) • Diesel engine with manual transmission Cab: • Standard, spacious crew cab (1+5) in RAL 3000 (fire red) • Mounts for 2 self-contained breathing apparatus in the crew compartment Bodywork: • Manufacturer Magirus Eurofire • TLF 16/25 body according to DIN standards • Three large lateral equipment compartments each side • Extendable steps for the front side equipment compartments • Brackets for standard equipment load • Mounts for 2 additional breathing apparatus • Roof compartment Fire Pump / Water Tank: • Magirus FPN 1600-8 centrifugal fire pump • Capacity 1,600 l/min at 8 bar • Water tank 2,600 l Firefighting Equipment: • Fixed rapid action hose reel, 50 m, in upper compartment G6 Safety and Lighting: • 2 rotating beacons at the front and 1 at the rear • Pneumatic special signal system (Martin horn) • Rear-view camera • Hygiene board available on request Kedpfsxk T Efex Adwell We are happy to provide you with a specific offer and can present the vehicle to you in detail at our premises in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Year of construction: 1999, condition: good (used), For sale is a water treatment plant of make ENVOTECH and type 0320 from 1999. Kodpjpl Tqtsfx Adwell In 2016 a new reaction tank of the brand Leiblein, made of stainless steel, with the dimensions of 500*500*400 mm was added. The plant is fully functional and the contact details of the competent service technician are available and can be forwarded at the time of purchase. Technical data & information: - Executed in stainless steel - Including oil separation by coalescence principle - Including automatic cleaning - Built-in pump for waste water, concentrate and distillate - Frequency control of the compressor motor - Type: 0320 - Rated capacity l/h: 320 Energy consumption - In operation: 25 kW - Maximum power: 35 kW Supply voltage: 3*400 V - 50 Hz Dimensions lxwxh: 245x155x265 Face: ca 2600 kg Sound pressure level: 75 dB All data refer to operation with water On request, loading and shipping can be organized throughout Europe. Prices plus VAT Viewing by appointment possible. Contact us, our team is happy to help you. Ch3mj0l3eg Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: like new (used), Volume 22 liters Good working condition. Please check out our other listings as well. Klsdpfjhwtv Ssx Adwsl

Condition: new, axle configuration: 3 axles, first registration: 05/2024, suspension: air, color: grey, Year of construction: 2024, Equipment: ABS, = Additional Options and Equipment = - Alloy wheels = Notes = Pezzaioli New 5 stock Livestock trailer - Water & Ventilation - Loadlift MY: 2024 - New 5-deck livestock trailer Floor 1: 22.1m² Floors 2-5: 34m² each Water supply & ventilation system Hydraulic tail lift Folding decks = Further Information = Suspension: Air suspension Rear axle 1: Twin tyres; Lift axle; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 2: Twin tyres; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 3: Twin tyres; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Gross vehicle weight (GVW): 39,000 kg APK (Main Technical Inspection): New TÜV on delivery Klsdjx Tp D Sopfx Adwsl Overall condition: Very good Technical condition: Very good Visual condition: Very good

Condition: good (used), mileage: 1,63,850 km, power: 115 kW (156.36 HP), fuel type: diesel, Year of construction: 2008, Year of construction: 2008 Max. front axle load: 3800 kg Max. rear axle load: 5700 kg Number of cylinders: 4 Engine capacity: 4.249 cc GVW: 8.600 kg Wheelbase: 302 cm Ksdpfex Tpchjx Adwell

Year of construction: 2011, condition: ready for operation (used), A compact ammonia refrigeration system GEA with evaporative condenser and pump-operated plate evaporator is available. Design: split design, refrigeration capacity: 247kW, compressor speed: 1450rpm, evaporation temperature: 0.7°C, condenser capacity: 300kW, wet-bulb temperature: 21°C, max. condensing temperature: 35°C, refrigerant: NH3, max. operating pressure high pressure/low pressure: 23bar/16bar. Secondary refrigerant: electrolysis water, secondary refrigerant temperature inlet/outlet: 6°C/2°C, secondary refrigerant volume flow: 54m³/h, secondary refrigerant pressure drop: 53kPa, refrigerant charge: 50kg, oil charge: 20l, compressor: Grasso 410. Machine dimensions X/Y/Z: approx. 4300mm/2000mm/2800mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Ksdpex Sywaofx Adwell

Condition: good (used), Year of manufacture 2008, 3,160 operating hours, newly serviced, very well maintained, NEW HD pump by FALCH Kledpfxewy Ellj Adwol

Condition: ready for operation (used), Year of construction: 2015, A lightly used Clayton quick steam generator including water treatment in container design is available. Operating overpressure: 10bar, operating temperature: 184°C, pressure vessel volume: 235l, heating surface: 27.5m², steam capacity: 1253kg/h, output: 786kW, test pressure: 15bar, fuel: natural gas H, fuel heating value: 33200kJ/Nm³, burner output min./max.: 281kW/843kW, max. gas pressure regulator/burner: 40mbar/25mbar, nominal gas flow: 91.4Nm³/h. Overall system dimensions X/Y/Z: approx. 6300mm/2450mm/3000mm, weight: approx. 6000kg, operating hours: under 4000h. The system was tested at the end of 2023 and in mid 2024. Documentation available. On-site inspection is possible. Kljdpox Srphefx Adwsl

Condition: excellent (used), mileage: 8,01,058 km, power: 315 kW (428.28 HP), first registration: 01/2006, fuel type: diesel, tire size: 385/55 R22,5, axle configuration: 6x2, wheelbase: 6,700 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro3, suspension: other, total length: 10,240 mm, total width: 2,530 mm, Year of construction: 2006, Equipment: ABS, air conditioning, airbag, cruise control, electric window regulation, power assisted steering, = Additional Options and Equipment = - DAB radio - High beam headlights - Air-suspended seats - Panoramic roof - Radio/CD player - Sleeper cab - Sun visor - Pre-heating system = Remarks = TRANSPORT TO ANTWERP 590 EURO = Further Information = Kljdpfxoxvlu As Adwel Technical details Number of cylinders: 6 Engine displacement: 12,580 cc Axle configuration Brakes: Disc brakes Front axle: Tyre size: 385/55 R22.5; Max. axle load: 7,500 kg; Suspension: Parabolic springs Rear axle 1: Tyre size: 295/80 R22.5; Twin tyres; Max. axle load: 11,500 kg; Suspension: Air suspension Rear axle 2: Tyre size: 295/80 R22.5; Twin tyres; Lift axle; Max. axle load: 7,500 kg; Suspension: Air suspension Weights Unladen weight: 14,764 kg Payload: 11,736 kg Gross vehicle weight: 26,500 kg Condition Technical condition: very good Visual condition: very good Identification Reference number: 80

Condition: good (used), Oil-water separation system, oil-water separator, condensate separator The cost-effective and permanently reliable solution to the problem is usually oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge. -Number: 1 filter available -Price: per piece Klodpsctla Hofx Adwel -Dimensions: 460/500/H950 mm -Weight: 32 kg

Condition: good (used), Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer: Alarm clock, oil-water separation system oil and water separator type WO 2 -Dimensions container: Ø 470 x 740 mm -Total dimensions: Ø 590 x 1160 mm -Weight: 27kg Kledpfxeq Ei Dbs Adwol

Condition: used, Temperature: Ambient to 85Deg C Dimensions: W32 x H30 x D35 cm Klodsxx Ndajpfx Adwjl We have 2 units in stock! Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, New Brunswick Scientific G76 Water Bath Shaker. New Brunswick Scientific water bath shakers are equipped with a one-piece seamless water bath of deep-drawn stainless steel which is easy to keep clean. Model G76 is equipped with a triple-eccentric Gyrotory drive which is precision-machined and stabilized to rotate the shaker platform in a 13 mm diameter circular orbit. The gyrotory shaker is engineered to handle any workload from 25 mm test tubes to 1,000 mL flasks with equal ease. Features: Reliable, Sophisticated and Convenient Platinum RTD Sensor Precise Temperature Feedback Regulation Triple-Eccentric Gyrotory Drive Kodoupvtijpfx Adwsll Good working condition. Please check out our other listings as well.

Year of construction: 2006, condition: like new (used), Details on request Kodpfx Aofla Emsdwsll

Condition: good (used), Year of construction: 1987, Saw blade Ø: 400 mm Cutting range round: 130 mm Rectangular: 305 x 40 mm Mitre cut at 45° round: 130 mm Rectangular: 245 x 40 mm Klodpfx Adsx Ir Rwswjl 2 cutting speeds via pole-switchable motor: 9 and 18 m/min Feed rate hydraulically steplessly adjustable: 0 - 1000 mm/min Saw drive: 380 V, 1.7/2.6 kW Weight approx.: 800 kg Space requirement without roller conveyor: 1100 x 1000 x 1900 mm

Condition: good (used), Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Kjdpsb A Ib Hjfx Adwsll Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge

Condition: good (used), MIG/MAG welding machine -Max. welding power: 400 A -Four-roller feed -Water-cooled -Hose package Kedpfsb A Igbex Adwsll -with removable wire feeder -incl. ground cable -Gas valve

Condition: good (used), Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable Kledpfx Aob A Iy Hsdwel The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge -Weight: 70 kg

Condition: good (used), Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Kledpfx Adjb A I Dvjwol Purified water meets legal requirements Regulations for sewer discharge -Dimensions: 500 x 1000 mm -Weight: 50 kg

Condition: good (used), Year of construction: 1980, functionality: fully functional, Good working kaltenbach saw machine Gearbox has been overhauled Safety hood mounted Kljdpjumb E Eofx Adwel Machine has been overhauled Installation and trade-in possible If interested, please call! Kenta Industrial Tools and Service Ambachtsstraat 3 7951 ZA Staphorst

Condition: new, mileage: 1 km, power: 325 kW (441.88 HP), fuel type: diesel, tire size: 295/80 R 22.5, axle configuration: 6x4, wheelbase: 4,800 mm, fuel: diesel, fuel tank capacity: 590 l, color: white, driver cabin: day cab, gearing type: semi-automatic, number of gears: 16, emission class: euro3, suspension: steel, loading space volume: 20 m³, Year of construction: 2023, = Additional options and equipment = - PTO (power take-off) = Further information = General information Year of manufacture: 2023 Technical information Number of cylinders: 6 gross weight: 33,500 kg Axle configuration Tyre size: 295/80 R 22.5 Brakes: drum brakes Suspension: leaf spring suspension Front axle: Max. axle load: 7,500 kg; steered Rear axle 1: Max. axle load: 13,000 kg; reduction: external planetary axles Klsdpfjxvz Sqsx Adwjl Rear axle 2: Max. axle load: 13,000 kg; reduction: external planetary axles Functional Body brand: EFEMMAK Number of chambers: 1 Pump: Yes High-pressure pump: Yes Water installation: Yes Hoses: Yes

Condition: used, power: 45 kW (61.18 HP), WATER JET MACHINE INTENSIFIER PUMP JET CUT 45 KW Klsdpfx Asx U Ax Sodwsl WORKING ORDER. large capacity pump that is capable of running single or multi head machines. spares package as shown

Condition: good (used), 1. Pagomat – professional industrial labeling machine. Automatic label application on a conveyor line. Removed from production and immediately ready for use, transferred to storage. €2,500. 2.Stainless steel containers – inox vessels for liquid storage, stable and durable. Price per piece: €600. Kjdpfx Adoxxvqmowell 3.Receiving unit – balance tank / air separator with pipes. Stainless steel, stable construction, equipped with a control box. €500. 4.Grater/shredder – metal construction with motor. Stable build, suitable for workshops and food processing. €800. 5.Kačkavaljka – inox mašina za obradu i mešanje kačkavalja, sa upravljačkom tablom i kompletnim cevnim priključcima,500l kapacitet iz rada prebacena  u magacina.  8500 EUR 6.Pagomat – machine for packaging in rigid trays, with the option of inert gas flushing. Removed from production and transferred to storage, complete unit. €6,000. 7.Pagomat – professional labeling unit, complete with mounts and control unit. €2,500. 8.Plate heat exchanger – maximum water flow 3,000 L per hour. €500. 9.Water filters – set of two units, with fittings and housing. Suitable for industrial and food-processing use. €100. te heat exchanger – Alfa Laval. Compact multi-plate model, ideal for cooling and heating liquids in food-processing and industrial applications. €4,500.

Condition: used, Year of construction: 2021, operating hours: 1,231 h, functionality: fully functional, total width: 720 mm, total length: 950 mm, total height: 800 mm, pressure: 500 bar, operating pressure: 450 bar, type of input current: three-phase, overall weight: 175 kg, high-pressure hose length: 20,000 mm, volume flow: 0.96 m³/h, empty load weight: 175 kg, input voltage: 400 V, hose length: 20,000 mm, High-pressure washer/sandblaster DENJET CE 20 COMPACT 500 - Pressure: 500 bar - Flow rate: 16 l/min - Power supply: 15 kW - Voltage: 400 V - Current: 28 A - 20 m wear-resistant high-pressure hose with ½” BSPP female swivel couplings (extension hose). - 15 m oil-resistant 4-core electric cable. - Dry shut-off trigger gun with 0.85 m stainless steel lance. - Straight jet nozzle Ksdpfxoyak Tyo Adwell - CEE electric plug. - Rotating nozzle. - Sandblasting kit with boron carbide nozzle. - Mobile abrasive container. - Personal protective equipment: helmet with eye protection, waterproof coverall, protective apron rated for up to 1000 bar, protective boots size 43.

Condition: excellent (used), Weiss Type: SWT 200/400 Weiss spray and splash water test cabinet The penetration of water into the housing is tested. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. According to DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation device means that water consumption can be reduced to a minimum. Features Glass door with wiper Pneumatic drive of the swivel tube Adjustable swivel angle Replaceable swivel tubes Nozzle holder swivels and can be replaced Adjustable water volume flow and measurement Control of the test duration Data for mechanical stress Max. load with test material (evenly distributed over the surface) Permissible test material weight for test material carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection class tests Kjdpovzz A Refx Adwoll Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Data for operation Voltage: 3/N/PE AC 400V ±10% 50hz Rated power 1.5 KW Rated current 6.0 A Weight: 375 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.