Used Combine Harvester for sale (3,492)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1500x2900x850 mm Weight 650 kg Total power requirement 3 kw Fgedpfx Adovz E S Aodek

Condition: used, Kirchner Leipzig triple-spindle combined table saw, mortising and milling machine. Without milling arbor. engine: 3 kW Fgodpfxowzbcvj Addjk

Condition: used, Combined planer-thicknesser - 2-knife cutterhead - 510 mm Fjdpfx Aox E A Uujddjgk - 3 kW - Main motor + feed motor - Robust design MARGIN TAXED (VAT on the margin)

Condition: new, Multipurpose combination machine with aluminum sliding table for sawing, milling, surface and thickness planing, and optional long-hole boring Torsion-resistant steel and cast iron construction Machine table made of cast iron, hardened and ground Smooth-running anodized aluminum sliding table, 10-year SCM warranty on slideway wear Large crosscut frame with extendable aluminum telescopic fence and flip stops Combination saw and mitre fence with 45° quick adjustment Max. saw blade diameter 315 mm with optional scoring unit, tiltable from 90° to 45° Helical steel feed roller for consistent timber feed during thickness planing Four spindle speeds, manually selectable Standard with forward/reverse spindle rotation Three independent motors for each working unit Sliding table with ball contact system Fitted with the proven million-fold SCM ball contact system Consistently smooth operation due to hardened and ground guides Not susceptible to dust and dirt thanks to minimal contact point between ball and trapezoidal rail The extraction ports for surface and thickness planing are located on the same (right) side, so the same extraction hose can be used for both planing operations. Helical steel infeed rollers for constant and even workpiece feed Massive anti-kickback pawls for operator safety 3-knife cutterblock ensures optimum planing results Crosscut length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100/79 mm Max. crosscut width left of blade: 1660 mm Cutting width at rip fence: 800 mm Saw shaft speed: 3500 rpm Saw blade tilt: 90° - 45° Working width: 300 mm Surface table length: 1260 mm Cutterblock diameter / number of knives: 72 mm / 3 pcs Table dimension: 300 x 450 mm Min. / Max. working height: 3 mm / 220 mm Max. stock removal: 4 mm Feed speed: 7 m/min Spindle diameter: 30 mm Usable spindle length: 100 mm Max. retractable tool diameter: 180 mm Spindle speed: 3500/6000/8000 rpm Motor power: 3 x 4 kW, 400 V, 50 Hz Extraction port diameter: 4 x 120 mm Saw blade guard extraction port Ø: 60 mm Fgsdpfx Aoiiyppjddsk Weight: 430 kg OPTIONS: - Professional fences EUR 300.-- Saw fence with quick lock and micrometric adjustment Surface planer fence 90° ÷ 45° continuously adjustable - Scoring unit incl. blade EUR 292.-- - Handwheel with digital readout for thickness table positioning EUR 129.-- - Mobility kit EUR 119.-- - 2 additional handwheels for unit adjustment EUR 45.-- - TERSA cutterblock, diameter 72 mm EUR 212.-- - Xylent spiral cutterblock with 3 rows of knives EUR 717.-- - Aluminum long-hole boring device EUR 390.-- - 2 flip stops for crosscut fence EUR 150.--

Condition: excellent (used), Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear -Manufacturer: Mubea, hydraulic profile steel shear type HIW1000 -Drive: hydraulic -Pressure force: 100 tons -Equipment: large support table with stops for die-cutting, various stamps and dies -Production: Punching, shearing, cutting, notching -Dimensions: 2360/760/H1800 mm -Weight: 2700 kg Fgedpfx Asx Dclbsddjk

Condition: used, Year of construction: 2010, BOTTERO COMBINED CUTTING LINE BOTTERO 341 BCS-J - Year: 2008 Max Dimensions: 6000 x 3210 mm Thickness: 2-25 mm | 2 + 0.38 PVB + 2 mm (545 VMXE-37) Fjdpfx Adoxn Nxcedogk Description: Straight and shaped cutting table for monolithic glass with tilting table, sheet lifting arms, belts for transporting sheets, 3 + 1 breakout bars, LOW-E removal wheel, interconnection module for optimization with the Office. Fixed table with belts for transporting sheets between monolithic and laminated processing. BOTTERO 545 VMXE-37 - Year: 2010 Max Dimensions: 3800 x 3210 mm Thickness: 2 + 0.38 PVB + 2 mm Description: Straight cutting table for laminated glass with three operation modes: Manual - Semi/Automatic. Features: Super-fast heating lamp, breakout, separation, blade cycle, crosspiece rotation, LOW-E removal wheel, interconnection module for optimization with the Office, and sheet descent arms at the end of the cycle.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x2070x1135 mm Weight 320 kg Fodpfsvz E Siox Addogk Total power requirement 2,2 kw

Condition: used, Year of construction: 2009, cutting height (max.): 102 mm, cutting width (max.): 800 mm, saw blade diameter: 315 mm, planing width: 310 mm, total length of planing tables: 1,500 mm, total width: 2,120 mm, total length: 2,600 mm, total height: 1,300 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 10,000 rpm, overall weight: 900 kg, chip removal: 5 mm, chip removal for surfacing (max.): 5 mm, number of planer blades: 4, spindle speed (max.): 10,000 rpm, spindle speed (min.): 3,000 rpm, Equipment: scorer, No. 04501 Fedpsxzk Thsfx Addegk 5-fold combined machine Felder CF 531 Used, year of construction 2009, very good condition Circular saw tiltable - table router tiltable - surface planer / thickness planer - preparation for long hole drilling support / long hole drilling device Circular saw Motor power 3 kW Scoring unit Sliding table 2500 mm long Manual saw blade tilting 90° - 45° Saw blade diameter 250 - 315 mm Spindle diameter 30 mm Cutting height max. 102 mm Cutting width approx. 800 mm Outrigger table with telescopic cross-cut fence Pivoting cross-cut fence with degree scale Moulder Motor power 3 kW Moulder table opening diameter 180 mm Maximum cutter diameter 300 mm Spindle diameter 30 mm Manual spindle swivel 90° - 45° Speed 3000 / 6000 / 8000 / 10000 rpm Planer Motor power 3 kW 4-knife planer shaft Planer Table length 1500 mm Planer Table width 310 mm Chip removal max. 5 mm Parallel fence pivotable 0° - 45° Thicknesser Table length 540 mm Thicknesser width 306 mm Thicknesser height 4 - 220 mm Switchable feed rate 6 m/min Preparation for long hole drilling support / long hole drilling device With travel device and handlebar Machine CE-compliant, GS-tested Technical documentation available as .pdf file Transport dimensions approx. 2600 x 2120 x 1300 mm LWH Weight approx. 900 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 1986, round bar steel - mm square edge steel - mm L-beam 120 x 13 mm hole punhing press: pressure 60 t hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm shear: flat material 500 x 14 mm shear: flat material 400 x 16 mm shear: flat material 180 x 20 mm Fsdst D Nz Aspfx Addegk shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic Section Shear - Combined

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, TERSA cutterhead with 4 knives, 5.5 kW motor, 400 V, 50 Hz, electronic start and brake unit. Thickness table adjustment with buttons for rapid or slow feed, as well as fine adjustment accurate to 1/10 mm. Integrated operating hours counter. Thickness table mounted on 4 support spindles and 4-way guided. Two feed speeds: 7 and 14 m/min. One rubber feed-in and one rubber feed-out roller. Two extraction ports Ø 160 mm. Slide for top extraction. Planer guard system SUVAMATIC. Motor power 7.5 kW. Positioning control including sensor monitoring. Fgjdpfox Ey Tzsx Addsk

Condition: good (used), Year of construction: 1996, For sale is a used Mini Max ST3W panel saw-spindle moulder with a cutting length of 2100 mm. The machine is in good condition and has been inspected and serviced by our qualified personnel. Technical specifications: - Cutting length: 2100 mm - Cutting width: 950 mm - Cutting height: 95 mm - 4 spindle speeds - Direction of rotation switch - Height-adjustable and tiltable - Circular saw with dust extraction Ø 120 mm - Twin motor, each 3 kW - Year of manufacture: 1996 The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: panel saw, moulder, spindle moulder, circular saw-moulder, combination machine, combi machine Reference: R-K0ACV Fedexxkrxspfx Addjgk

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, cutting height (max.): 104 mm, cutting width (max.): 800 mm, saw blade diameter: 315 mm, overall weight: 400 kg, input voltage: 400 V, power: 5.52 kW (7.51 HP), The powerful sliding table saw with tilting spindle moulder Standard Equipment: - 3x 400 V motor voltage - 50 Hz motor frequency - 7.5 HP (5.5 kW) with star-delta starter - Direction of rotation switch - Circular saw with saw blade tilting 90°–45°, max. cutting height 104 mm with 315 mm blade diameter, speed 4800 rpm - Cutting width 800 mm, min. transport width 800 mm - Parallel fence with digital readout - Extraction duct for 800 mm cutting width - Spindle moulder tilting 90°–45°, speeds: 3500/6500/8000/10,000 rpm - Spindle table opening (mm): 230 - Manual spindle tilting 90°–45° - Spindle fence 230 for max. tool diameter 230 mm, fence rails 400 mm - EURO spindle guard - MULTI-adjustment system for spindle fence “230” - Fence rails anodised aluminium - Sliding table, cutting length 1550 mm - Sliding table anodised - Outrigger table 1100 for sliding table 1300–2000 mm - Cross-cut fence 1100 mm, extendable to 2000 mm - Working height (mm): 890 - Min. transport width (mm): 800 - Extraction connection diameter (mm) saw/saw guard: 50 - Extraction connection diameter (mm) fence/under-table moulder: 120/80 - Weight (with standard equipment): 400 kg Special equipment included in the price: Fsdpfx Adjx D Tk Iodjgk 008 7.5 HP (5.5 kW) 010 Star-delta starter 201 Electric height and angle adjustment for saw blade with LED display 119 Electric height and angle adjustment for spindle moulder with LED display 076 Cutting width 800 mm with full table length, min. transport width 800 mm 103 Spindle moulder shaft D=30 mm, 115 mm working height above table

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x1800x1200 mm Weight 650 kg Fedpevz E Rxsfx Addogk Total power requirement 3 kw

Condition: ready for operation (used), functionality: fully functional, Peddinghaus Peddycut 275 6-way combined section steel shear Available immediately from site: Peddinghaus section steel shear Type Peddycut 275 Year of manufacture 1987 Pressure capacity 27 tons Table 400 x 250 mm Thrust 90 mm Power 10 mm Drive 1.5 kW Strokes/min 15 Fgedjwfdbpopfx Addsk Flat steel 50 x 15 mm Angle steel 65 x 6 mm Round steel 28 mm Square bar 25 mm Knife pitch 175 mm Punch stroke 24 mm Punches 20 mm in 19 mm or 30 mm in 6.5 mm sheet Foot switch Various punches Transport: from site

Condition: excellent (used), Saw-milling-jointing-thicknesser-Technical data: Jointing planer: -Max. working width 400 mm -Swivelling joint stop 90C-45C tersa planing knife Thicknesser: -Max. working width 400 mm Passage height 230 mm Circular saw: -Max. Cutting length 3000 mm -Max. Scoring unit Stable boom with angle-adjustable telescopic ruler extendable up to 285 mm with 2 folding stops-Sliding table with prism guide, milling machine: Fedpfjvk Sqdox Addegk -Spindle diameter 30 mm -Milling stop with stop ruler You can call or write to us. We can speak and write German and Russian. You can also send messages in English.

Condition: excellent (used), Year of construction: 2017, For sale is a used Hammer C3-31 4-function combination machine with a cutting length of 2100mm. The machine is in very good condition and has been serviced and inspected by our specialist staff. Technical data: - Cutting length: 2000mm - Cutting width: 650mm Fgsdpjxxi Irsfx Addjk - Cutting height: 103mm - 4 spindle speeds - Direction selector switch - Hammer system planer cutterblock - Planing length: 1400mm - 3 motors, each 3 kW - Year of manufacture: 2017 The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Related terms: combination machine, combined machine, planer, thicknesser, thicknessing machine, circular saw Reference: R-L08SV

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x1800x1200 mm Fgodpfxjvz E Rro Addek Weight 650 kg Total power requirement 2,2 kw

Condition: excellent (used), Year of construction: 2020, For sale is a used Hammer C3-31 4-function combination machine with a cutting length of 1300mm. The machine is in very good condition and has been serviced and inspected by our specialist staff. Technical data: - Cutting length: 1300mm - Cutting width: 650mm - Cutting height: 103mm - 4 milling speeds - Directional switch - Silentpower spiral cutter block - Planing length: 1400mm - 3 motors, each 3kW Fodpfx Adjxxi Dtjdogk - Year of manufacture: 2020 The machine is located in A-5431 Kuchl and can be inspected by appointment during our business hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thicknesser, thicknessing machine, circular saw Reference: R-L0B8S

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2540x2900x850 mm Fgsdpjvz E Ikefx Addsk Weight 1200 kg Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3000x2900x850 mm Weight 1280 kg Total power requirement 5,5 kw Fgodpfx Aovz E Ecoddjk

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1480x580x1120 mm Weight 280 kg Fgsdpfxsvz E Drj Addsk Total power requirement 2,2 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1800x740x1000 mm Fsdpfxevz Expo Addjgk Weight 420 kg Total power requirement 4 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1800x740x1000 mm Weight 420 kg Fgjdpfx Aovz Ewleddsk Total power requirement 4 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1480x580x1120 mm Fodpsvz Eqxefx Addegk Weight 280 kg Total power requirement 2,2 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x745x1100 mm Weight 580 kg Fjdpfx Adjvz Emyedegk Total power requirement 4 kw