Used Combine Harvester for sale (4,319)

Condition: used, operating hours: 2,454 h, power: 210 kW (285.52 HP), color: other, total width: 6,600 mm, working width: 66,000 mm, Year of construction: 2017 Number of cylinders: 6 Serial number: 1ZOT560AH-HR110363 Engine hours: 2454H Threshing hours: 1280H Front tire size: 800/70R32, Michelin Rear tire size: 530/80R26, Michelin Transmission: Pro Drive Straw chopper Cone distributor 4-wheel drive Engine: John Deere Engine power: 285 kW Number of cylinders: 6 Documents: available First put into service: Number of tedders: 5 Equipped with: - Corn harvesting equipment: 8-row corn header Type: 608C Year of manufacture: 2011 Corn upper and lower screens Rsdpfj Adz R Hjx Airoch - Grain equipment Cutting bar Type 622R Year of manufacture: 2009 Working width: 6600 mm Transport trailer for cutting unit Grain sieve Camera system Overall dimensions of combine harvester without attachments: approximately 9000 x 3650 x 4000 mm Remarks: signs of wear Online auction of agricultural, earthmoving, and landscaping equipment, including the FENDT 720 Vario, 828 Vario and Favorit 816 Turboshift tractors, NEW HOLLAND T7.260 and T8.420 tractors, MASSEY FERGUSON 9S.425 EX/DYNA-VT tractor, JOHN DEERE 6210R and 7280R tractors, PÖTTINGER Novacat V10000 ED CL rotary mower, JOHN DEERE T560i combine harvester, CLAAS Quadrant 2200RC baler and Rollant 455 RC UNIWRAP baler-wrapper combination, HITACHI Zaxis 160 LC-3 / 180 LC / 300 LC / 350 LC excavators, HITACHI ZW180-6 wheel loader, SCHAEFF / TEREX TW95 tracked excavator, GEHL AL750 wheel loader and RT105EU skid-steer loader, FAUN AFT 50-3 mobile telescopic crane, XCMG XGA16E articulating boom lift, JLG aerial work platforms, RECORD P33T dump truck, KUHN HR6004 rotary harrow, LEMKEN Polaris fertilizer spreader, AMAZONE and KVERNELAND precision seeders, GREENTEC HS252 hedge trimmer, UNI CARRIERS reach trucks, MITSUBISHI electric pallet trucks, AGRINOVA scarifiers, FERRARI garden tractors, STIHL and AMBROGIO robotic mowers, and various other agricultural, construction, gardening, and warehouse machines, etc. The online auction opens Tuesday 20 October and closes Tuesday 17 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: - Tuesday 24 November - Thursday 26 November Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2007, operating hours: 2,000 h, power: 283 kW (384.77 HP), Equipment: air conditioning, cabin, * Engine manufacturer: John Deere Equipment: Air conditioning, straw chopper, cutterbar carriage, hillside compensation, onboard computer/monitor, throughput control, yield measurement, reel horizontal adjustment, hydrostatic drive, reversing device, cutterbar, loss measurement Rcsdpfoil Hadsx Aireh Shaker with JD625R cutterbar with a working width of 7.60m, transport trailer, and rape seed table ENGINE IS MAKING NOISE.

Condition: new, functionality: fully functional, Year of construction: 2026, power: 136 kW (184.91 HP), motor manufacturer: Mercedes, gearing type: hydrostat, fuel type: diesel, fuel consumption per hour: 9 l/h, maximum speed: 25 km/h, color: green, overall weight: 6,000 kg, front tire size: 32, rear tire size: 12.5, total height: 3,000 mm, total length: 8,000 mm, total width: 3,200 mm, working width: 4,000 mm, machine/vehicle number: 1, Equipment: additional headlights, air conditioning, cabin, front power take-off, hydraulics, lighting, Custom-made chamomile harvesting attachments for Claas combine harvesters. Rcsdjz E Aylepfx Airsh Available for Claas Dominator, Mega, and Medion models. Each unit is manufactured to order and can be adapted to the customer’s combine model and specific requirements. Header width is optional. The recommended working width is 4 meters. The price depends on the customer’s requirements and specifications. The complete combine harvester shown in the photos is priced at 150,000 EUR. Custom-built to order Suitable for chamomile harvesting Adaptable to different Claas models Robust and reliable construction Dimensions and mounting system made according to agreement For more information, price details, and production specifications, please contact me via message or phone. More photos and videos of the machine in operation are available upon request.

Condition: used, Year of construction: 1990, operating hours: 2,946 h, power: 115 kW (156.36 HP), Equipment: air conditioning, cabin, INTERNAL VEHICLE NUMBER: M662 ----CLAAS DOMINATOR 88 SL ----HOURS: 2,946 ----YEAR OF MANUFACTURE: 1990 ENGINE: PERKINS 6-CYLINDER WITH TURBO (4-STROKE DIRECT INJECTION) WATER-COOLED MAXIMUM SPEED: APPROX. 25 KM/H CUTTING UNIT: 3.90 METERS RAPS TABLE THRESHING DRUM WIDTH: 1300 MM THRESHING DRUM DIAMETER: 450 MM STEPLESSLY ADJUSTABLE FAN FOR CLEANING FUEL TANK PIPE: HYDRAULICALLY SWIVELING TIRES NEW NUMBER OF SHAKERS: 5 SHAKERS HYDRAULIC DRIVE GRAIN TANK CAPACITY: 4600 L STRAW SPREADER TRANSPORT LENGTH: 10 METERS TRANSPORT HEIGHT: 3.85 METERS UNLADEN WEIGHT: APPROX. 8500 KG HEATING AIR CONDITIONING (COMPRESSOR MISSING) 3D LEVELING SYSTEM HYDROSTATIC TRANSMISSION WITHOUT CUTTING UNIT WAGON THE HEADER DRIVE HAS BEEN COMPLETELY OVERHAULED NEW BASKET NEW BELT NEW BLADE Contact us directly via WhatsApp: Why Autohaus Mat GmbH? 1. Attractive trade-in: We handle the process quickly and fairly. With our trade-in bonus, you maximize the value of your vehicle and benefit when purchasing a new model. 2. Individual financing solutions: Would you like to finance your new vehicle? We offer customized financing solutions tailored to your needs: with or without a down payment * Flexible terms * Top conditions 3. Personal customer service: Our experienced team will support you from the initial consultation to vehicle handover. 4. Our additional services: In addition to vehicle purchase, we offer exclusive services for a smooth process: Worldwide vehicle sales: Support with purchase and export, wherever you are. Transfer registration plates: Provision of export or short-term registration plates for transport. Customs clearance: We take care of all formalities for export abroad. Delivery of your vehicle: Safe and timely delivery directly to you. Important: All offers are subject to availability. The vehicle description serves as a guide; only the information in the purchase contract or order confirmation is legally binding. For vehicles with VAT, net sales for export are generally possible if all required documents are available. Net sales within the EU are now only conducted with VAT deposit and proof of registration in the destination country (Confirmation of Arrival), provided that all necessary documents are present. For our export customers, we offer the following services: Export license plates for up to 30 days * Short-term license plates (5 days) * Preparation of the export declaration Rcjdpfx Aez Sdvwjirsh Contact us directly via WhatsApp: Staff on-site during opening hours. Please call in advance to make a reservation. We look forward to your call Your team from Autohaus MAT in Waibstadt

Condition: used, Year of construction: 2011, front tire size: 650/75R32, rear tire size: 480/80R26, Reinforced floor plate Automatic cutterbar speed control Automatic reel speed control 2 short / stalk dividers Upper grain splash guard Zürn rapeseed header cutterbar / Performance package Univeral concave electric sieve adjustment Semi-automatic / trailed pre Rcjdpfx Aiet Etq Rorsh

Condition: used, Year of construction: 2023, front tire size: TRAKRIDE 30 ZOLL, rear tire size: 620/70R26, SuperFlow 12.20 704000145 Cutterbar trailer Ziegler PowerCarrier 4208868 40 / km/h version Air compressor Working light Full-LED VarioGuide RTK NovAtel / IDEALharvest Cutterbar drive variable hydr. cutting angle adjustment / Fendt cutterbar Rodpfot Hrzwex Airsch

Condition: used, Year of construction: 1995, Equipment dossier Motan Rcjdpfx Aijxfv Eweroh

Condition: used, Year of construction: 2008, Row spacing 75 cm foldable with HZ under-mounted forage harvester automatic / picking plate verses sunflower kit - reconditioned - suitable for Fendt 9470X / Rsdpfx Aistq Tbasrsch

Condition: used, Year of construction: 2023, front tire size: 650/75R32, rear tire size: 600/70R24,

Condition: used, Year of construction: 2022, front tire size: 800/65 R32, rear tire size: 540/65 R24,

Condition: used, Year of construction: 1967, power: 21 kW (28.55 HP), * Working width of cutting unit (cm): 175 * Weight without cabin (kg): 0 * Grain tank capacity (hl): 6.5 * Model: MF30-6 * Serial number: 0D7758 * Year of manufacture: 1967 ---- Internal vehicle number: 8144 ---- Errors and prior sale reserved. WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Rcjdpovhvf Tjfx Airoh Whatsapp Whatsapp

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,706 h, power: 366 kW (497.62 HP), gearing type: hydrostat, fuel type: diesel, maximum speed: 30 km/h, first registration: 07/2017, next inspection (TÜV): 07/2026, rear tire size: 500/85 R24, machine/vehicle number: YHG233775, Equipment: air conditioning, cabin, hydraulics, lighting, rape cutter, trailer coupling, On behalf of an authorized party, we are offering the following used item for sale: Case-IH combine harvester AF 7240 with ST rotor Chassis number: YHG233775 Longitudinally arranged ST rotor 30 km/h version 6-cylinder Power: 366 kW (497 hp) Front wheels: Track drive, sprung, 610mm Rear wheels: 500/85 R24 HID work light package AC FAN automatic fan speed adjustment Adjustable discharge spout Cross-flow transverse flow fan Hydraulic drive Redekop chopper Xtra Chop Accu Guide complete Steering on Egnos – retrofitted with existing RTK antenna LED work light package, 4 x rear, 1 x grain tank inlet Additional cameras Yield and moisture measurement Radio, two-way radio Last inspection before the 2025 harvest, approximately 300 ha Minor scorching above the tank, damaged cables have been repaired Header 9.15 m, Series 3050, steplessly adjustable Type: 306 Year: 2017 Serial number: 868112015 Hydrostatic reel drive Automatic adjustment of reel speed Reel horizontal adjustment Hydraulic multi-quick coupler Short stubble divider Hydraulic rapeseed knife Rabolon ear lifter Header wagon TAM Leguan quattro 30 Type: SWW 30FT VIN: WEGTP28F3HAAA3318 Year: 2018 2-axle 25 km/h LED lighting set Tires: 10.0/75-15.3 Price upon collection. Rcsdpozabtdjfx Aireh The item is located in 49419 Wagenfeld-Ströhen and must be collected from there by the buyer. This offer refers exclusively to the described item. Other items that may be shown here are possibly part of a different offer. Errors and omissions excepted. Inventory number: 2926-26

Condition: used, Year of construction: 2011, Cutterbar with rapeseed equipment Cutterbar is BJ 2022 Cutterbar Claas Vario / 930 / Rsdpfx Aiot Twuisrsch

Condition: used, Year of construction: 2021, front tire size: TRAKRIDE 30 Zoll, rear tire size: 620/70R26, SW Fendt 9.20m SuperFlow VarioGuide Standard Trimble SmartConnect Hectare: 770 / crawler track Reversing camera AGCOPower engine 451 hp / Rcedpfx Aisr Uavkeroh

Year of construction: 2011, condition: ready for operation (used), A complete Facma/Cerquetani hazelnut harvesting and processing line for processing hazelnuts from crop reception through sorting, cleaning and grading is available. 1) Facma hazelnut harvester. 2) Ditta Cerquetani Antonio collection and transport trailer. 3) Facma combined processing, cleaning, rotary screen and screening unit. 4) Facma washing and wet cleaning unit. 5) Drying system with drying silo, blower and electrical control cabinet. 6) Facma inclined conveyor with feed hopper. 7) Facma horizontal conveyor and selection belt. 8) Facma sorting, inspection and grading table. Including various peripheral equipment and accessories. Documentation available. Inspection on site is possible. Rcedpeznx Ndsfx Airoh

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Rcedpfxjz D Ihfs Airjh

Condition: good (used), Code: 0507 Brand: SCM MINIMAX - ITALY Model: CU 350 K - CE Standard Universal 5 works combined machine for joinery workshops, craftspeople, furniture makers, bespoke furnishings, doors, wooden joinery, DIY, panels and various applications – CE Standard Technical data: Base consisting of a single, fully welded steel monoblock Cast iron worktable Wide worktable surface area Three-phase motors V 380/50 Hp 3 each Surface planer: Working width 350 mm Total length of tables 1800 mm N° 3 blades Anodised aluminium guide adjustable from 90° to 45° Thickness planer: Table dimensions 600 x 350 mm Max/min working height 230/3 mm Max removal depth 5 mm Spindle moulder: Spindle length 136 mm Max rotational speed 8000 rpm Max tool diameter extending below the table 180 mm Circular saw: Carriage made of anodised extruded aluminium with a sliding system on steel guides Carriage stroke 1500 mm Max blade diameter 300 mm Blade tilting 90°–45° Cutting width at parallel guide 900 mm Squaring frame complete with guide, stops and a guide adjustable in both directions from 90° to 45° for angled cuts on panels Workpiece clamping presser N° 3 suction inlets diameter 120 mm Rcodpfx Ae Afwxleireh Overall dimensions of assembled machine mm 2000 x 2400 x 1100 h Transport dimensions mm 2000 x 1400 x 1200 h Weight kg 600

Condition: good (used), Year of construction: 1987, For sale is a used Felder BF5-41 4-in-1 combination machine with a cutting length of 1200 mm. The machine has been inspected and refurbished by our service team. Technical data: - Cutting length 1200 mm - Cutting height 95 mm - Max. saw blade diameter 300 mm - 3 milling speeds - Planer width 410 mm Rcjdpfx Aiez Symkjrjh - 4-knife cutterblock - 3 motors, each 3 kW / 4.1 hp - Year of manufacture 1987 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, multi-function machine, planer, thicknesser, circular saw Reference: R-E28JC

Condition: used, Used TriumphPH 400 three-phase woodworking machine combination Used Triumph PH 400 three-phase. Planer tables are 204 cm long and 400 cm wide. Rjdpfx As Agvuqsirech The planer cutterblock consists of three knives. The machine is in a three-phase version with a 4 horsepower motor each, with the spindle motor starting in star and delta configuration. The cast iron miter gauge table measures 240 cm x 110 cm, with an adjustable bevel gauge from 0 to 45°. The planer table thickness allows for a maximum thickness of 23 cm. The cast iron table of the mortiser is 57 cm x 30 cm, while the cast iron table of the spindle saw is 110 cm wide and 34 cm long. The maximum blade diameter that can be mounted is 315 mm. Internal spindle housing diameter is 280 mm. Spindle arbor diameter is 270 mm. The planer and saw motors start in star and delta configuration; the spindle motor has two speeds.

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. Rjdpfx Aez Hngmjirjch The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: new, Catalog number: S 0335 - New machine, in stock - CE certificate Rcodpfxe Af I Die Airjh PLANER: - Dimensions of the work table: 1500 x 320mm - Max. cutting depth: 5mm - Dimensions of the aluminum guide rail, mm: 1100 x 155 THICKNESS PLANER: - Dimensions of the work table: 316 x 600mm - Max. cutting depth: 3mm - Cutting speed: 7m/min - Material thickness: 4 - 230mm - Motor power: 3kW - Spindle speed, rpm: 5600 - Dimensions (L/W/H): 1500/600/1050mm - Weight: 315kg * Cast iron worktops with a ground surface, * Tables with precise adjustment for longitudinal planing, * Stable aluminum guide rail with the possibility of tilting from 90° to 45°, * Spindle guard, * Work table of the thickness planer with a central guide column and carriage, * Power on/off without stopping the machine, * Mortising machine with left-hand rotation. Net price: 8900 PLN Net price: 2120 EUR Net price calculated according to an exchange rate of 4.20 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: good (used), Year of construction: 1999, For sale is a used Hammer C3-31 Trend 4-in-1 combination machine with a cutting length of 1250 mm. The machine has been inspected and refurbished by our service team. Technical data: - Cutting length 1250 mm - Cutting height 103 mm - 3 milling speeds - 3 system cutterhead shafts - Planing width 310 mm - Max. passage height 230 mm - 3 motors, each 3 kW / 4.1 hp - Year of manufacture 1999 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thicknesser, thicknessing machine, circular saw Rcjdpsz Sthusfx Airoh Reference: R-J0001

Year of construction: 2009, condition: ready for operation (used), Combined automatic float and laminated safety glass (VSG) cutting line manufactured in 2009. This LISEC Combined VSG & Float Glass Cutting Line features a robust configuration with breakout, transport, and trimming modules. It is currently installed and running in active production, allowing for turnkey inspection. If you are looking to get high-quality glass processing capabilities, consider the LISEC Combined VSG & Float Glass Cutting Line we have for sale. Contact us for further details. Rjdpfs Agixyex Airsch - Plant Configuration: Combined automatic float and laminated safety glass (VSG) cutting line with breakout, transport, and trimming modules- System Manufacturer: LISEC Austria GmbH / LISEC Maschinenbau GmbH- Years of Manufacture (Line Integration): 2009 & 2016 (mixed installation)- Operational Status: Currently installed and running in active production (turnkey inspection possible)- Standard Line Voltage: 400 V / 50 Hz (3/N/PE~ 400V, Control: 24V AC/DC)- Operating Compressed Air: 6.00 – 8.00 bar- Total Cumulative Installed Weight: > 28,400 kgMODULE BREAKDOWN & INDIVIDUAL SPECIFICATIONS:1. VSG (Laminated Safety Glass) Processing Section:- Pos 01: LISEC PTV-60/30RE (YOM: 2009) * Type: Laminated glass cutting machine (Verbundglasschneidanlage) * Weight: 5,640 kg | Electrical: 400 V / 50 Hz- Pos 02: LISEC VZ Linie 2 (YOM: N/A) * Type: Assembly unit / line connection section- Pos 03: LISEC LKT-45/45TS (YOM: 2009) * Type: Processing / support air-cushion table * Weight: 3,200 kg | Connected Load: 61.28 kVA | Air: 8.00 bar- Pos 04: LISEC VB-33 (YOM: 2009) * Type: Laminated glass line sub-assembly * Weight: 2,200 kg | Connected Load: 17.00 kVA | Air: 6.00 bar- Pos 05: LISEC FASV-33 (YOM: 2016) * Type: Automated protruding PVB film trimmer/remover * Weight: Not specified | Connected Load: 0.83 kVA | Air: 6.00 bar- Pos 06: LISEC VB-33 (YOM: 2016) * Type: Cutting machine for laminated glass * Weight: 2,200 kg | Connected Load: 18.83 kVA | Air: 6.00 bar | Max Load: 43 kg/m²- Pos 07: LISEC AL-32/33N (YOM: 2016) * Type: Glass stop locator and positioning section * Weight: 1,830 kg | Connected Load: 25.88 kVA | Air: 6.00 bar- Pos 08: LISEC BTA-20/26 (YOM: 2016) * Type: Horizontal belt transport conveyor * Weight: 1,020 kg | Connected Load: 6.08 kVA | Air: 6.00 bar | Max Load: 50 kg/m²2. Float Glass Processing & Transfer Section:- Pos 09: LISEC BTA-20/26 (YOM: 2016) * Type: Horizontal belt transport conveyor * Weight: 1,020 kg | Connected Load: 6.08 kVA | Air: 6.00 bar- Pos 10: LISEC BTA-40/26 (YOM: N/A) * Type: Horizontal transport / support table * Weight: Not specified | Electrical: Not specified- Pos 11: LISEC BTA-20/26 (YOM: 2016) * Type: Horizontal belt transport conveyor * Weight: 1,020 kg | Connected Load: 9.05 kVA | Air: 6.00 bar- Pos 12: LISEC BTS-37/33 (YOM: 2016) * Type: Manual breakout table with integrated breaking bars * Weight: 1,543 kg | Connected Load: 15.75 kVA | Air: 6.00 bar- Pos 13: LISEC LKT-10/33 (YOM: 2016) * Type: Horizontal air-cushion transfer table * Weight: 250 kg | Connected Load: 4.50 kVA | Air: 6.00 bar | Max Load: 33 kg/m²- Pos 14: LISEC BTA-40/26 (YOM: 2009) * Type: Horizontal belt transport conveyor unit * Weight: 1,154 kg | Connected Load: 2.30 kVA | Air: 8.00 bar | Max Load: 50 kg/m²- Pos 15: LISEC TBY-26/12 (YOM: 2009) * Type: Intermediate transport module * Weight: 255 kg | Connected Load: 0.00 kVA | Air: 6.

Condition: good (used), Year of construction: 1983, functionality: fully functional, Used, compact LUREM C 260 EN2 surface planer and thicknesser from 1983. The machine is suitable for surfacing and thicknessing solid wood. It features a planing width of approximately 260 mm, adjustable surfacing tables, and a swiveling fence. The thickness is adjusted mechanically via a handwheel. Robust and compact machine, well-suited for carpentry shops, workshops, and ambitious users. Technical data / Features Manufacturer: LUREM Rcsdpfx Aszzah Isireh Type: C 260 EN2 Year of manufacture: 1983 Machine no.: C.J. 0.17 Working width / planing width: 259 mm Motor power: 2.2 kW Max. speed: 6,400 rpm Thickness planer feed height: 140 mm Power connection: 400 V / three-phase Jointer cutter block Surfacing and thicknessing function Adjustable surfacing tables Fence included Height adjustment of the thickness table via handwheel Dust extraction connection available The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Transport is possible for an extra charge! Technical data and features may vary. Errors, prior sales, and changes are subject to change. All information is without guarantee.

Condition: excellent (used), Year of construction: 1995, Surface planer and thicknesser combination machine Manufacturer: Elektra-Beckum Model: HC 410 Year of manufacture: 1995 Working width: 410 mm Max. planing height: 230 mm Power: 5.5 kW Rcedpfx Aoz Uxmzjireh Number of knives: 3 Knife type: Strip-type planing knives Feed rate: 7 m/min Surface table length: 1,700 mm Weight: approx. 300 kg Includes infeed/outfeed roller table.