Used 5 X Combo for sale (91,898)

Year of construction: 1955, condition: used, Union model L.2.A.S. 5" x 24" Lathe. Backgeared and Screwcutting lathe with a detachable gap bed. A practical and characterful old lathe that works well and has plenty of capacity in a compact size. Bedsz Hifdopfx Andjdi From the family agricultural engineering workshop, which is now sold, hence the lathe is for sale. 3-phase 415v, so ideal for conversion to variable-speed drive from a 1-phase to 3-phase inverter (not included). 3-jaw chuck, faceplate and a collection of changewheels for screwcutting. It works. I can send a video of it running. Buyer to arrange and fund the shipment. Foklifting onto your van / truck may be possible with the agreement of the new property owner. Please contact me if you would like to arrange this. Location is near Kings Lynn, Norfolk, UK. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), functionality: fully functional, Cutting length: 2020 mm Max. sheet thickness at 400 N/mm²: 5 mm Bdedpfx Asz Sqmzondei Max. sheet thickness at 750 N/mm²: 3 mm Cutting angle approx.: 1.5° Strokes per minute: 40 strokes/min Back gauge approx.: 750 mm Stand throat depth: 200 mm

Condition: good (used), Year of construction: 2007, HAAS VF-3BHE vertical machining center, 5-axis Year of manufacture: 2007 Specifications: Axis travel: X-1016mm, Y-508mm, Z-635mm Table: 1219 mm x 457mm Table load: 1814 kg Spindle taper: SK40 Spindle speed: 10000 rpm Bjdpfs Ahn N Uex Andjdi Distance from spindle nose to machine table: 107 - 742 mm Drive power: 22.4 kW Rapid traverse X/Y/Z = 24.5 m/min Tool changer capacity: 40 positions Weight: 6500 kg Dimensions LxWxH = 3400 x 2400 x 2600 mm Accessories/options: - 4/5 axis, TR210 rotary/tilting table - Renishaw OMP40 touch probe - Renishaw TS27 tool measuring unit - Swarf conveyor - Programmable coolant nozzle - Automatic door opening closing PLC possibility - Tool holders with tools, 17 pieces - Coolant tank Run time: 12233 hours Tool changes: 208476 Under power in our warehouse, possible to test it anytime!

Condition: good (used), Year of construction: 2001, functionality: fully functional, Lead screw and feed spindle lathe Bjdpfx Anj Ahkc Nsdsdi Manufacturer: Konventa Model: 500 x 2000 mm Year of manufacture: 2001 Center height: 250 mm Turning length: 2000 mm Rapid traverse 1 closed steady rest 1 open steady rest Lighting Tailstock, MK 5 The machine is still very accurate.

Condition: used, Year of construction: 2000, sheet width 3020 mm plate thickness 5 mm Bsdpfsyk Dicjx Andsdi distance between columns 3020 mm Control Simatec OP7 stroke 450 mm back stop - adjustable 2000 mm work height max. 900 mm total power requirement 22 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 4200 x 1600/2900 x 2000 mm Features: - Motorized rear stop, 1000 mm - Hydraulic upper beam adjustment - Motorized lower beam adjustment - Hydraulic tool clamping - Side guard - Foot switch - Operator's manual

Condition: good (used), Year of construction: 2002, GALLUS T 180 S by Graficon 5-Color Flatbed Screen Printing Machine with Hot Foil and Die-Cutting Dear Sir or Madam, We are pleased to offer the following Gallus T 180 S by Graficon, a highly versatile narrow-web label printing and converting machine equipped with five flatbed screen-printing units, hot-foil capability, lamination, and flatbed die-cutting. The machine is currently installed at the owner’s production facility and is offered for sale due to the planned acquisition of a new machine. Additional photographs and production videos are available upon request. _____ Machine Summary Description Details Manufacturer Gallus / Graficon Bdedszmhkujpfx Andoi Model T 180 S Year of manufacture Approx. 1992 Complete overhaul 2002 by Graficon Printing process Flatbed screen printing Number of printing units 5 Maximum web width 200 mm Maximum printing width 180 mm Current condition Installed in factory, described as being in good condition Availability Subject to final confirmation Selling price EUR 49,000 Delivery terms Loaded on truck / ex current location, subject to confirmation FGT condition rating ★★★★★☆☆☆ 7/10 – _____ Why This Machine Is Interesting The Gallus T 180 S is a specialized narrow-web production system designed for high-value labels and technical products requiring strong ink coverage, high opacity, and tactile effects. The five flatbed screen-printing units allow the production of applications such as: • High-opacity white printing • Pharmaceutical and cosmetic labels • Industrial and technical labels • Security labels • Special-effect and tactile coatings • Metallic and decorative labels • Premium wine and beverage labels • Heat-resistant and durable labels The additional hot-foil, embossing, laminating, and die-cutting equipment makes this machine suitable for the complete production of finished labels in one production line. A major advantage is the extensive overhaul carried out by Graficon in 2002, during which the machine was reportedly rebuilt to an “as-new” condition. The printing units were also upgraded with servo drives, improving register control and production stability.

Condition: used, Year of construction: 1996, Technical details: turning diameter: 500 mm turning length: 1500 mm turning diameter over bed slide: 290 spindle bore: 71 mm turning speed range: 3 - 2800 U/min rapid speed: 10 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 22 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 3,0 x 1,6 x 2 m Bdsdpfx Ajwwlvlsndei with Teach In controll R&D MTC-K PARAT toolpost 1 fixed steday dia. 100 mm 4 jaw face plate dia. 500 mm coolant attachment *

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Bedpfx Anowiatijdsdi Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour. Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Condition: excellent (used), Year of construction: 2022, operating hours: 8,703 h, functionality: fully functional, machine/vehicle number: G2713-0032, overall weight: 6,800 kg, Hello. I have a 5-axis CNC milling center, a HYUNDAI KF3500/5A, for sale. The machine is connected and operational. It is in perfect technical condition!!! Low operating hours!!! Only 8703 hours. I have owned the machine since it was new!!! I am the first owner!!! Bsdj Adqltspfx Andodi _ Type: 5-axis Milling Center Manufacturer: HYUNDAI Wia Model: KF3500/5A _ 5-Axis Control: HYUNDAI WIA FANUC i Series _ SMART Plus Country of origin: South Korea Year of manufacture: 2022 _ Machine parameters: – Number of axes: 5 – Work table dimensions (length x width): Fi-400 x 335 mm _ 250kg – Maximum spindle speed: 15,000 [rpm] – Tool magazine: 30 pcs. BT40 – Tool measurement probe – Workpiece measurement probe – Spindle power: 18.5/11 [kW] – Axis travel (X/Y/Z) mm: 600/655/500 – A-axis travel = 150° – C-axis travel = full 360° – Rapid traverse speed (X/Y/Z) [m/min]: 36/36/30 – Total power: 25 kVa – Total weight: 6800 kg – Chip conveyor – Oil mist separator

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Bodjvvi N Iepfx Andodi

Condition: used, Year of construction: 2017, machine/vehicle number: 1000020374, functionality: fully functional, operating hours: 5,484 h, power: 12.8 kW (17.40 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: DC, travel distance X-axis: 3,280 mm, travel distance Y-axis: 1,660 mm, travel distance Z-axis: 240 mm, number of axes: 5, number of slots in tool magazine: 16, controller manufacturer: Biesse, actuation type: pneumatic, Equipment: CE marking, documentation/manual, We are selling a 5-axis machining center, Biesse Rover A 1632 Smart, manufactured in 2017. The machining center is in very good condition due to relatively infrequent use since its purchase. We are the first owner. I have attached the file "Cartellino_1000020374" to the listing below. This is a manufacturer's document describing the configuration of the offered machine according to Biesse standards. Technical specifications of the machining center: ‣ Working areas *: X = 3280 mm; Y = 1580 to 1660 mm, depending on operating conditions. Z = 200 mm (configuration with 5-axis unit, drilling head, and H=74 mm modules). Z ​​= 240 mm (configuration with 5-axis unit, drilling head, and H=29 mm modules). ‣ Configuration 2 ‣ 6 ATS tables – 18 carriages ‣ Rear row stops with 115 mm travel and 25 mm extension. ‣ Intermediate row stop located at coordinate 1190 mm with 140 mm travel. ‣ 4 side stops with 140 mm travel (2 right + 2 left) with pneumatic system. ‣ Sensor to verify stop retraction. ‣ 4 support bars for H=74 mm modules. ‣ Claw-type vacuum pump with 250 m³/h capacity. ‣ Vacuum module – Size 132x146 – H74 mm with high-friction surface and pre-installed vacuum seal. ‣ Vacuum module – Size 132x75 – H74 mm with high-friction surface, pre-installed vacuum seal, and pre-installation for locating pins. ‣ Vacuum module – Size 132x54 – H74 mm with high-friction surface, installed vacuum seal, and pre-installation for locating pins. ‣ Automatic lubrication system. ‣ Sawdust and chip removal conveyor. ‣ 5-axis interpolating machining unit, 13 kW (17.4 HP), HSK F63 tool holder, liquid-cooled. ‣ Coolant supply unit. ‣ Additional Z-carriage for machining units, controlled by an independent Z-axis. ‣ BH 17 L drilling head. ‣ 16-position rotary tool magazine on the X-carriage. ‣ 12-position linear tool magazine mounted on the machine frame. ‣ HSK F63 adapter with integrated flange for saw blades used in 5-axis units. ‣ 300 mm diameter saw blade for integrated-flange mounting. ‣ bSolid software. If the information above is insufficient, please contact me and let me know what you would like to know. Upon request, I can provide a document in English with a detailed description of our machining center's layout. Best regards, Ihor Balychev. Bjdpfxjz R I U Ij Andodi

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, blade shaft diameter: 240 mm, coil weight: 25,000 kg, type of input current: three-phase, input voltage: 400 V, product width (max.): 1,650 mm, sheet thickness stainless steel (max.): 5 mm, Stainless steel slitting line with NLT slitter-setup-robot — fully functional and in excellent condition. Basic Technical Specifications: - Material: Stainless steel - Material thickness: 0.3–3.5 (5 mm) - Material width: 400–1,650 mm - Line speed: max. 250 m/min. - Coil weight: max. 25 metric tons (unwinding and rewinding) - Coil outer diameter: max. 1,820 mm (unwinding and rewinding) - Coil inner diameter: 508 / 610 mm (rewinding with attachment) - Slitting shaft diameter: 240 mm - Blade diameter: max. 380 mm - Slitter drive: 201 kW - Rewinding recoiler drive: 212 kW Cutting capacity – stainless steel (max.): Thickness 0.3–1.0 mm: 25 strips Thickness 1.0–1.5 mm: 20 strips Thickness 1.5–2.5 mm: 14 strips Thickness 2.5–3.0 mm: 5 strips Thickness 5 mm: 2 strips System consists of: - 4-fold coil magazine - Coil car - Uncoiler with snubber roll – uncoiler movable - Paper winder - Strip edge control - Inserting device with bending roll - Pull-off stand - 5-roll straightening machine - Crop shear with scrap cart - Laminating frame Bdjdpfjztykgjx Andei - Slitter - Edge trimmer - 4-position blade changer - NLT slitter-setup-robot PRCS20 - Loop - Braking unit (plate) - Transfer table with separating shaft (automatic) - Recoiler - Coil car - 4-fold turnstile

Condition: used, Year of construction: 1985, sheet thickness: 2,25total power requirements: 1,1sheet length: 2025 Working length: 2025 mm Bsdpfsvaatfjx Andjdi Kl. Tail width: 5 x s Kl. Inner radius: 1.5 - 2 x s Adjustability of the lower and bending beams: 90 mm for round bends: 90 mm Highest working position of the upper beam: 190 mm large opening width of the upper beam: 290 mm Duration of a workflow: 7.0 sec. External dimensions approx.: 3000 x 1000 x 1650 mm with: - Control panel on the right side of the machine - Simple bending angle adjustment on the control panel - Choice of switching to automatic, semi-automatic or typing mode - Potentiometer for degree adjustment -Foot switch used, in good condition

Condition: used, Year of construction: 2020, carrying capacity 5000 kg length 5000 mm width 2000 mm height 500 mm weight 1250 kg length in total ca. 6300 mm transport measurements ca. 5900x2000x500 mm Like new, only used 3 times Heavy-duty trailer with double swivel steering - Small turning circle - Tilt-proof thanks to steering angle limiter Bedpfow I Hqwsx Andjdi - Robust, low maintenance - Reversible drawbar - 30 mm impregnated wooden support. - Coupling eye diameter 40 mm - Tire dimensions approx. 425 x 260 mm

Condition: excellent (used), max. wheel diameter 250 mm gear width 40 mm max. module 6 min. module 1 number of teeth 8 - 100 cone distance 310 mm Bedjz Dbzropfx Andedi pressure angle 15 - 30 ° blade cutter head diameter 450 mm pivoting angle 0 - 90 Grad total power requirement 16 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 2,2 x 1,7 x 1,7 m Change gears, chip conveyor, cutting heads, knifes,...

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: blank Ø 460 x 5 mm -Inside: Ø: 50 mm -Bolt circle: Ø 100 x 18 mm -Number of teeth: 54, see photo Bdsdsvzni Rjpfx Andji -Weight: 5 kg

Condition: excellent (used), Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter, ventilation filter -Manufacturer: UCC, Air Filter Air Breather Filter Bsdpfx Ajvyqvqondjdi -Type: 40 5 -Number: 4x air filters available -Price: per piece -Dimensions: Ø 77 x 65 mm -Weight: 0.2 kg/piece

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, total length: 8,635 mm, load capacity: 5,000 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, Abus overhead crane – Type: single-girder – Capacity: 5,000 kg – Lifting height: 6 m – Year of manufacture: 2006 – Hoist type: wire rope hoist – FEM/ISO hoist: 2m Dimensions – Span: 8,635 mm center-to-center – Overall length: 8,785 mm – Installation height: 900 mm – Width of wheel set including bumpers: 2,400 mm – Width of wheel set excluding bumpers: 2,200 mm – Wheelbase: 1,900 mm – Suitable for crane rail: 50×30 mm – Dead weight: approx. 2,075 kg Speeds – Hoisting: 5/0.8 m/min (2 speeds) – Trolley travel: 20/5 m/min (2 speeds) – Crane travel: 40/10 m/min (2 speeds) Features – Control: wired control panel; radio control optional – Crane manual available: yes, newly prepared – Electrical diagram available: yes – Condition: in good condition, dismantled but in working order Bdsdszi Thwopfx Andsi – Dismantled: yes, available immediately

Condition: excellent (used), machine/vehicle number: JK-00316, Year of construction: 2009, lifting height: 4,700 mm, free lift: 1,620 mm, fuel type: electric, mast type: triplex, battery manufacturer: R&W, battery voltage: 80 V, fork length: 1,200 mm, Lifting capacity: 3.000 kg Maximum passing height: 222 cm CE mark: yes Technical condition: very good Bodpfx Anex Itf Asdsdi Visual appearance: very good Fork carriage: Sideshifter Latest inspection: 2025-11-03 Please contact Johanny Hendrikse for more information

Condition: used, Year of construction: 2007, Technical details: x-travel: 1000 mm y-travel: 1000 mm z-travel: 500 mm B-axis (table): 360 ° spindle taper: HSK A63 working spindle range of revolution per minute : 15000 U/min Bjdpju Idm Nofx Andedi rotary table: 260 mm control: Andronic 2060PKM feed: 1 - 5000 mm/min rapid traverse X,Y: 15 m/min. rapid traverse Z-axis: 12 m/min total power requirement: ca. 42 kW weight of the machine ca.: 6,0 t dimensions electric cabinet LxWxH: 2,4x0,6x2,2 m dimension machine xH: 3,5x2,4x3,2 m 5-axis BAZ in parallel kinematics suitable for prototypes. i.D. *

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,250 kg, total length: 82,200 mm, total height: 5,000 mm, clearance between the columns: 3,300 mm, shelf height: 5,000 mm, number of shelf rows: 6, clear span: 3,300 mm, frame height: 5,000 mm, frame width: 1,100 mm, load per truss pair (max.): 3,250 kg, shelf length: 82,200 mm, support length: 3,300 mm, 2 single-row pallet racking systems + 2 double-row pallet racking systems (8 x M50113313-4) each 13.7 m long, 5 m high, 1.1 m deep, each with 4 bays, 3.3 m wide, each with 3 beam levels, load capacity 3250 kg. Bodpfszhi Scjx Andedi - 30 upright frames (RM5011 - RAL5019) - 80 base plates, shims, and fasteners - 20 spacers/connectors for double rows (ZAbh20) - 120 floor anchors (ZZBA1210) - 144 single beams (T33135 - RAL2008) - 0 impact protection/collision guard (ZRS40901) - 6 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after payment receipt - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout Germany; excluding islands! Deliveries to EU countries are subject to individual agreement.

Condition: excellent (used), plastic strapping, strapping tape, packaging tape, tensioning tape, plastic tape -Strapping band: Plastic strapping band 8 rolls Ovp -Type: 5 x 0.5 mm core 200 mm -Width: 5 mm -Roll: Ø 395 x 190 mm -Price/Delivery: complete -Transport dimensions: 800/800/H390 mm Bodpfjwpgf Ssx Andjdi -Total weight: 87 kg

Condition: used, functionality: fully functional, machine/vehicle number: WKEAZ000001090051, empty load weight: 2,850 kg, maximum load weight: 15,150 kg, overall weight: 18,000 kg, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 04/2023, next inspection (TÜV): 04/2027, suspension: air, tire size: 345/45/19,5, tire condition: 85 %, trailer brake: trailer braked, Year of construction: 2023, Equipment: ABS, sturdy frame, KTL-coated – some minor surface rust Extendable drawbar, length 1,800 - 2,300 mm BPW axles with disc brakes, 370mm, ABS/EBS Air suspension with long air springs Suitable for 7.15 and 7.45-meter wheelbases, 7.15-meter wheelbase flush at the rear Riding height approx. 1.05 m Parking height 1.02 - 1.32 m Electrical connection: 15-pin plug Lighting with partial LED design Tires 445/45 R 19.5, tread depth: 7 - 13 mm Valid MOT until 04/2027 Valid safety inspection until 10/202 1 storage box on the left ADR sign on the rear 2 work lights (center and rear) 5 for sale For questions, please call 0171 8600862 Bodpoz Enp Esfx Andedi Best regards, M. Irmer

Condition: good (used), mileage: 4,76,184 km, power: 272 kW (369.82 HP), first registration: 10/2014, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, fuel: diesel, gearing type: automatic, number of gears: 12, emission class: euro6, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Equipment: AdBlue, air conditioning, central locking, cruise control, fog lights, onboard computer, soot filter, = Additional Options and Accessories = - Front work lights - Heated mirrors - Windshield - Enclosed cab - Cab - Air suspension - Particle filter - Power take-off (PTO) = Notes = Volvo FM370 6x2*4 - HIAB X-Hiduo 188 E-5 Crane with remote - Euro 6 Year of Manufacture: 2014-10-23 Mileage: 476184 YV2X922C1EA768827 HIAB Crane with remote Steering rear axle Euro 6 I Shift Sideboards = Additional Information = General Information Year of Construction: 2014 Bodpfx Anoy Hq A Ajdedi Transmission Transmission: I shift, 12 gears, Automatic Axle Configuration Front Axle: Tire size: 385/55R22.5; Max. axle load: 9000 kg; Steered; Tire tread depth left: 40%; Tire tread depth right: 40% Rear Axle 1: Tire size: 315/70R22.5; Double tires; Max. axle load: 11500 kg; Tire tread depth left (inner): 50%; Tire tread depth left (outer): 50%; Tire tread depth right (inner): 50%; Tire tread depth right (outer): 50% Rear Axle 2: Tire size: 385/55R22.5; Max. axle load: 7500 kg; Steered; Tire tread depth left: 50%; Tire tread depth right: 50% Weights Unladen weight: 14,363 kg Payload: 13,636 kg GVW: 27,999 kg Functional Body manufacturer: HIAB X-Hiduo 188 E-5 Condition Technical condition: good Optical condition: good

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, 1 used steam boiler ----- - mounted on frame - Manufacturer: LOOS, International Type: UL-S Bsdextnf Espfx Andedi Capacity: 5,000 kg/h Operating overpressure: 18 bar Max. steam temperature: 204°C Year of manufacture: 1993 Equipped with Weishaupt gas burner G50/2-A, ZM, gas control line, separate control cabinet, feed water pump, and the available coarse and fine fittings.