Used Compounding for sale (148)

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Njdpsi Dtbijfx Aa Iown Visit us at our Wuppertal plant. Trail-run with your material-mix possible, darte and details uopn request.

Year of construction: 2003, condition: refurbished (used), Theyson Compounder High torque machine Nwedpfonpxqlex Aa Ijn 2x45 mm, with side feeder, and underwatergranulating. New (Beckhoff) PLC is fitted, but need to be programmed.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control Nwodji Dtb Aopfx Aa Ijn OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Nwodpfxsi Dtbue Aa Ion Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: new, Year of construction: 2025, operating hours: 2,846 h, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Screw diameter 73 mm Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW Njdpfji Dtbqex Aa Iown L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant.

Year of construction: 2025, condition: new, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Njdpfx Ajd Hqa Ioa Iown Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LDscrew speed up to 625 r.p.m. adjustable Capacity +/- 800 kg/h depending material specifications Drive from 197 kW up to 350 kW possible, optional by appoinment FLENDER gear-box L/D 34 - 40 LD , by appointment , due to your material formula needs 1x venting port new control board optional - equipment against additional price: screen-pack-changer / melt-filtration unit pelletizing material feeding , loss-in-weight blenders pellet classifier Nsdeh Eyduopfx Aa Iown screw configuration and more Please inform about your needs to send you a detailled quotation, thank you All ex our stock Wuppertal-Germany available

Year of construction: 1996, condition: reconditioned (used), No.: 2590k 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: 1x gravimetric ( loss-in-weight ) blending unit 5-Components SITECOM incl. control board 1x Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. Nedpfoh Eyd Aox Aa Iswn 1x Side feeding extruder TSD 75 twin-screw with 3 kW 3x venting ports 1x Melt-Filter Type K –HS- Y 176 mm incl. Hydraulic Pack 1x Melt-Pump with motor 22 kW 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Inspection visit / demonstration shortly possible - date on appointment You´re welcome. More compounding pelletizing lines ex pour workshop available, find our most-recent stock-list online on our homepage.

Year of construction: 1996, condition: reconditioned (used), No.: 2590k 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: Extruder Twin-screw THEYSOHN Type TSK 90 Nodpfx Aogbffvja Iown Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. 1x Side feeding extruder TSD 75 twin-screw with 3 kW 3x venting ports 1x Melt-Filter No. 1 type K –HS- Y sieve/Mesh 176 mm incl. Hydraulic Pack 1x Melt-Pump with motor 22 kW 1x Melt-Filter No. 2 type K-SWE 180 RS back-flush self-cleaning 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Inspection visit / demonstration shortly possible - date on appointment You´re welcome. More compounding pelletizing lines ex pour workshop available, > find our most-recent stock-list online on our homepage.

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LD Capacity 800 kg/h depening material specifications Drive from 197 kW up to 350 kW possible , optional by appoinment L/D 34 - 40 LD , by appointment > due to your material formula needs drive up to 230 kW - 350 kw optional against add.price 1x venting port new control board optional - equipment against additional price: screen-pack-changer pelletizing material feeding , loss-in-weight gravimetrci blenders pellet-classifier and more Please inform which equipment you need for a detailled quotation, thank you. Nwedpfx Aaec Rukwo Ion All ex stock available

Year of construction: 2017, condition: used, screw size 30 mm Nwodjb Niqhspfx Aa Ijn Capacity 1000 kg/h Drive 240 kW L/D

Condition: new, functionality: fully functional, Year of construction: 2025, A compound cone crusher is a type of crusher used in mining and aggregate industries to break down rock into smaller pieces. It combines the advantages of both traditional cone crushers and modern technology to achieve higher efficiency, better product shape, and reliable operation. Here are its key features, working principles, and typical usages: ### Key Features: 1. Combination of Crushing Technologies: - Integrates both spring and hydraulic cone crushers to offer improved performance. 2. High Crushing Ratio: - Capable of crushing materials into fine and uniform sizes with high reduction ratios. 3. Durability: - Built with robust materials and components for long-lasting operation. 4. Adjustable Settings: - Allows for easy adjustment of the crusher settings to control the size of the output material. 5. Efficient Crushing Chamber: - Designed to minimize material clogging and ensure continuous operation. ### Working Principles: 1. Material Feeding: Nodjtxhybopfx Aa Iown - Raw material is fed into the crusher through a hopper. 2. Crushing Process: - The material enters the crushing chamber, where it is crushed between a fixed cone (outer shell) and a moving cone (inner shell). - The moving cone is supported and driven by an eccentric shaft, which rotates and gyrates to crush the material against the fixed cone. 3. Adjustment Mechanism: - The gap between the moving cone and the fixed cone can be adjusted to determine the size of the output material. 4. Discharge: - Once crushed, the material exits the crusher through the bottom discharge opening. ### Typical Usages: 1. Mining Industry: - Used for crushing various kinds of ores and rocks, particularly in secondary and tertiary crushing stages. 2. Aggregate Production: - Ideal for producing gravel, sand, and crushed stone for construction and infrastructure projects. 3. Recycling: - Utilized for crushing construction waste and recycling materials to create reusable aggregate. 4. Construction Industry: - Applied in producing concrete and asphalt aggregates, road base, and other construction materials. Types of Cone Crushers Standard Cone Crusher: Suitable for medium crushing tasks. Short Head Cone Crusher: Used for fine crushing applications. Hydraulic Cone Crusher: Equipped with hydraulic systems for improved operation. Multi-Cylinder Hydraulic Cone Crusher: Provides better control and higher productivity. Spring Cone Crusher: Uses springs to protect the machine from overloading. Applications of Cone Crushers Mining: Crushing of ores for further processing. Construction: Producing aggregates for roads, bridges, and buildings. Quarrying: Breaking down rocks for use in gravel or crushed stone products. Recycling: Processing of demolition debris and concrete. In summary, a compound cone crusher is a highly efficient, versatile, and durable piece of equipment ideal for various crushing applications in the mining, aggregate, recycling, and construction industries.

Condition: used, ? Polygonmach PVB150 Mobile Concrete Plant | Cold asphalt plant, RCC mixing plant, soil compound mixing plant. Emulsion mixing plant ? Polygonmach PVB150 is a next-generation mobile concrete plant designed to meet the demands of modern construction projects for speed, flexibility, and cost-efficiency. It offers dual-mode production – both Volumetric and Batch type operation – on a single platform, delivering perfect compatibility for all project types. ✅ Dual-Mode Flexibility: • Volumetric Mode: On-demand, instant production up to 200 m³/hour directly at the site • Batch Type Mode: Precision recipe-based production up to 100 m³/hour ✅ Key Features: • Fully Automatic or Manual Operation: User-friendly control panel allows seamless control • Precision Weighing System: Ensures accurate dosing, minimizes material waste • Multiple Mix Recipes: Easily switch between different mix designs • Separate Storage Bins: 3x8 m³ aggregate hoppers, 5-ton cement silo, water & additive tanks • Filling Conveyor: Fast and efficient loading • Quick Setup: Ready to operate in just 10 minutes • Fully Mobile: Maximum ease in site-to-site transportation • Low Logistics & Transport Costs: On-site production eliminates ready-mix losses • Sustainable Production: Mix only what you need, when you need it • Recycling-Friendly: Supports the use of recycled materials when needed ⸻ ? Multi-Purpose Capability – One Platform, Many Solutions: In addition to concrete production, the PVB150 is engineered to serve as: • Mechanical Stabilization Plant • Cold Asphalt Mixing Plant • Emulsion Mixing Plant • Soil Compound Mixing Plant This multi-functional system makes Polygonmach PVB150 the most versatile solution on the market for road construction, infrastructure development, and short-term or small-to-medium scale projects. ⸻ ?? 100% Made in Turkey | Smart Technology | High Performance | Eco-Friendly Operation ✅ Replace fixed plants with a smarter solution. ✅ Reduce setup costs, increase mobility, boost site efficiency. Nwedpfxow Hztfo Aa Ion ⸻ ? Contact us today and transform your jobsite! ? ? ?

Condition: used, XSK-400 Rubber Mixing Mill – Two-Roll Open Type | Wuxi Double Elephant Manufacturer: Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. Model: XSK-400 Country of Manufacture: China Technical Data: Roller Diameter: 400 mm Working Width: 600 mm Roller Speed ​​Ratio: 1 : 1.35 Front Roller Speed: 17.45 m/min Main Motor Power: 45 kW Motor Speed: 980 r/min Voltage: 380 V Frequency: 50 Hz Batch Capacity: Approx. 20-30 kg Machine Weight: Approx. 7,000–8,000 kg Description: The XSK-400 Mill for Rubber is a high-quality two-roll open mixing mill manufactured by Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. (China). Designed for rubber compound mixing, warming, and sheeting, this machine ensures stable performance, precise temperature control, and long-term durability. Perfect for industrial rubber production, hose and seal manufacturing, and laboratory compound processing. Main Features: Nedpfexrdgvjx Aa Ijwn Heavy-duty chilled cast iron rolls with excellent hardness and finish Water-cooled drilled rolls for temperature stability Low-noise hardened gear transmission for smooth performance Motorized nip adjustment for roll spacing precision Safety stop controls and reliable electrical components Durable construction, easy maintenance, and long service life Applications: Rubber and silicone compound mixing Plastic and rubber sheeting Hose, gasket, and belt manufacturing

Year of construction: 2012, condition: ready for operation (used), This LEISTRITZ ZSE60MAXX-48D was manufactured in 2012. A co-rotating twin-screw extruder, it's designed for high-performance compounding of advanced polymer materials, including biodegradable polymers. Adaptable to various extrusion processes, it's ideal for bioplastics, masterbatch production, or specialty compounding. Contact us for more information about this machine. Nwjdexnd Raepfx Aa Ion Application Types Extrusion

Year of construction: 2025, condition: new, functionality: fully functional, power: 5.5 kW (7.48 HP), overall weight: 1,955 kg, total length: 4,330 mm, total width: 2,360 mm, total height: 2,925 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO SD COMPACT with DEC (Drum Extension Compound) is designed for recycling, construction, and material processing, offering efficient screening of coarse materials such as soil, gravel, wood chips, and waste. Its extended drum system increases the screening area by nearly 50%, enabling separation of up to four fractions with high precision. The foldable, semi-mobile design ensures easy transport, setup, and reliable operation across various sites. Nedpfxswyvfvj Aa Iown Key Features: • DEC drum extension increases screening area and output by up to 50% • Variable drum speed, reversible rotation, and adjustable screen angle • Modular design with interchangeable drum variants and quick change system • Integrated vibration support and cleaning brush for consistent results • Robust, foldable frame for mobility and long service life Tech Highlights: Outer diameter of the drum Ø 1.3 m · Drum L 3.1 m · Qmax 50 t/h · n 5–20 rpm · P 5.5 kW (optional 7.5 kW) · Usable screening surface 10.2 m² · Mesh size Ø 6–Ø 100 mm · Hopper opening 2.24 × 0.85 m · Filling height 1.81 / 2.91 m · Weight 1,955 kg · Length 4.33 m · Width 2.36 m · Height 1.81 / 2.91 m

Condition: ready for operation (used), 2000 kg per hour capacity. Rasch TR is a precrystallizing machine (tempering machine) for chocolate masses, fat glazes, compound masses and similar fat products. The machine fulfills the requirements of precrystallizing, i.e. it forms smallest stable fat crystal modifications and homogenously disperses them in the melted mass, in an optimal way. Even low-fat masses, with a fat content of min. 26% can be precrystallized. Ingredients such as whole hazelnuts, all forms of chopped or broken nuts and certain dried fruits or small pieces of nougat may be included in the mass prior to tempering. Re-work can easily be integrated and handled. The mass-hopper is double-lined and equipped with a stirrer, so that any inclusions in the mass will be well dispersed. The hopper is heated with a warm water system so that the mass is free of crystals prior to tempering. The forwarding screw is a multi-start screw with a high gradient. The screw's depth is determined by the product to be handled, up to 16 mm deep for masses with nuts. The forwarding screw fulfils two objectives: First of all, it conveys the mass to the place of use with the help of a continuously variable drive. After that the mass crystalizing at the heat exchange surface is mixed with the mass inside the screw. This process guarantees the essential requirements of pre-crystallisation: creation of stable, smallest crystals and regular dispersion in the liquid mass. Nwsdpfx Aew Apc Tja Ijn Rasch special tempering unit type TR is available in five different versions (500, 100, 1500, 2000 und 2500 kg/h). Screw can easily be removed and cleaned.

Condition: new, Year of construction: 2025, power: 7.5 kW (10.20 HP), Batch ball mills find applications in various industries where the processing of materials in discrete batches is required. The versatility of batch ball mills makes them suitable for a range of applications. Here are some common batch ball mill applications: 1. Ceramics Industry: - *Glaze Preparation:* Batch ball mills are extensively used in the ceramics industry for preparing glazes. Raw materials such as feldspar, quartz, and clay are ground with ceramic balls to achieve the desired particle size for glaze formulation. 2. Chemical Industry: - *Material Grinding:* Batch ball mills are used for grinding and blending various chemical materials. This includes the production of pigments, dyes, and other specialty chemicals where precise particle size control is crucial. 3. Pharmaceuticals: - *Drug Formulation:* In pharmaceutical manufacturing, batch ball mills are used for grinding and blending powders to create drug formulations. The controlled environment provided by these mills is essential for maintaining the integrity of pharmaceutical compounds. 4. Food Industry: - *Ingredient Mixing:* Batch ball mills may find application in the food industry for mixing and grinding ingredients. This can include the production of food additives, flavorings, and other powdered or granular products. 5. Mining and Minerals Processing: - *Ore Grinding:* Batch ball mills are used in mining and minerals processing for grinding minerals and ores. The controlled grinding helps in obtaining the desired particle size for subsequent processes, such as mineral separation or extraction. 6. Paints and Coatings: - *Pigment Dispersion:* In the paints and coatings industry, batch ball mills are employed for dispersing pigments into paint formulations. Achieving a uniform particle size is crucial for the quality and appearance of the final coating. 7. Building Materials: - *Raw Material Grinding:* Batch ball mills are used in the preparation of raw materials for the production of building materials, such as cement and concrete. Grinding of materials like limestone and clay helps in obtaining the desired fineness for subsequent processes. 8. Electronic Materials: - *Ceramic Powder Processing:* In the electronics industry, batch ball mills can be employed for processing ceramic powders used in the production of electronic components and insulating materials. Nwjdpfx Aaoq I N H Nj Ion 9. Research and Development: - *Material Testing:* Batch ball mills are often used in research and development laboratories for testing and optimizing material formulations. They provide a controlled environment for small-scale processing and experimentation. 10. Customized Applications: - *Specialized Processes:* Batch ball mills can be adapted for various specialized processes in different industries where precise grinding and mixing are required. Custom modifications can be made based on specific application requirements. When using a batch ball mill, it's important to consider factors such as the type of material being processed, desired particle size, and the specific requirements of the end product. Additionally, following the manufacturer's guidelines and maintaining proper operating conditions are essential for efficient and effective milling processes.

Condition: like new (used), Year of construction: 2019, machine/vehicle number: 103641, power: 9.5 kW (12.92 HP), Complete Chocolate Enrobing Line – GAMI, Italy MELTING TANK Stainless steel tank, 150 kg capacity, with heating and mixing system for melting and maintaining chocolate or compounds at set temperature. Equipped with auger for product transfer, adjustable mixer speed, and electronic temperature control. • Capacity: 150 kg • Power: 3.9 kW • Dimensions: 900 × 1150 × 1500 mm TEMPERING MACHINE Automatic continuous tempering machine with integrated dosing, enrobing conveyor, and vibratory feeder. Fully electronic temperature regulation, programmable functions for tempering, melting, vibrating table, and dosing control. • Bowl capacity: 25 kg • Hourly output: up to 90 kg/h • Power: 3.2 kW • Dimensions: 570 × 740 × 1560 mm COOLING TUNNEL Modular stainless steel tunnel with closed-loop air-cooling system for chocolate coating solidification. • Useful length: 10 000 mm • Belt width: 300 mm • Power: 2.1 kW • Voltage: 400 V 3+N 50/60 Hz GRANULE / DECORATION DISPENSER Adjustable-speed wire-mesh conveyor for dosing inclusions (grains, nuts, etc.) onto enrobed products. • Hopper volume: 11 dm³ • Power: 0.18 kW • Dimensions: 600 × 700 × 1460 mm FEATURES • Fully stainless-steel construction, CE-compliant • Independent electronic controls for each module Njdpfxoqbtcas Aa Iswn • Emergency stop and interlock safety devices on all units • Closed-circuit air-cooling system (no external chiller required) • Compact modular design – easy to install and maintain TECHNICAL HIGHLIGHTS Total connected power ≈ 9.5 kW Total length ≈ 12 m Manufactured by GAMI srl, Italy – renowned for professional chocolate processing equipment.

Condition: used, XK400×1000 Rubber & Plastic Mixing Mill – High-Performance Two-Roll Mill Manufacturer: Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. Model: XK400×1000 Main Technical Data: Roll diameter: 400 mm Working length: 1000 mm Front roll speed: 14.85 m/min Rear roll speed: 18.85 m/min Speed ratio: 1 : 1.27 Nodpfx Aaoxrc Eqo Iswn Max roll gap: 10 mm Batch capacity: 25–35 kg Motor power: 37 kW (Siemens IE3 motor) Control system: Siemens S7-300 PLC with Profibus Length: 4400 mm Width: 1710 mm Height: 1850 mm Weight: ~8500 kg Description: The XK400×1000 Mixing Mill is a heavy-duty two-roll open mill designed for rubber and plastic compound mixing, warming, and sheeting. Built with precision alloy rolls, Siemens electrical control, and a robust gear transmission system, this machine ensures stable, low-noise operation, high efficiency, and long service life — perfect for industrial rubber production, laboratories, and plastic processing plants. Key Features: Alloy chilled cast iron rolls – HS70±2 hardness for long life Water-cooled drilled rolls with rotary joints for temperature control Low-noise gear drive with hardened gears Motorized roll gap adjustment (0.5–10 mm) Forced thin-oil lubrication system 4 emergency stop buttons for operator safety Premium Siemens control & electrical components Applications: Rubber compounding and mixing Sheet forming for rubber and plastics Hose, seal, and belt production

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: ECO-DEVNYA-I8, total length: 6,490 mm, total width: 2,000 mm, total height: 6,260 mm, overall weight: 21,500 kg, power: 44 kW (59.82 HP), Equipment: documentation/manual, Hazardous Waste Incineration Plant – Inciner8 I8-1000 Location: Devnya, Bulgaria Manufacturer: Inciner8 International Ltd., United Kingdom Year of manufacture: 2018 Condition: Installed, fully operational, complete documentation and CE certification General Description The Inciner8 I8-1000 is a high-performance system for thermal treatment of hazardous and industrial waste, featuring fully automatic loading, dual-chamber combustion, and an integrated flue-gas cleaning system. Designed for ease of operation, robust construction, and long service life, the unit ensures full compliance with EU Directive 2000/76/EC and the European Industrial Emissions Directive (IED). The system guarantees complete oxidation of waste under controlled temperature and residence time, resulting in non-hazardous ash and emissions meeting EU regulatory limits. Main Technical Parameters: Nedpfxexlcw Tj Aa Iewn • Type: Dual-chamber incinerator with secondary afterburner • Model: Inciner8 I8-1000 C/W Eco Flam Burners • Feeding capacity: up to 330 kg per batch (automatically adjusted to waste type) • Combustion temperatures: Primary 800–1100 °C | Secondary ≥ 850 °C (2 s residence time) • Loading system: Hydraulic RAM feeder with automatic door and safety interlocks • Auxiliary fuel: Low-NOx diesel burners (two-stage surface-stabilized combustion) • Operation mode: Underpressure – 2 mbar (ID fan with frequency control) • Heat recovery: Air-cooled heat exchanger for waste-heat utilization (up to 400 °C) Flue-Gas Cleaning System (Pollution Control System – PCS): Three-stage treatment: 1. Heat exchanger – rapid cooling of flue gases below 425 °C 2. Powder dosing unit – hydrated lime/limestone injection for neutralization of acid gases (HCl, SO₂, HF) 3. Ceramic candle filter – final filtration of particulates, heavy metals, and residual compounds Key features: • Ceramic filter candles with automatic reverse-pulse cleaning • Particulate emissions (PM₁₀ / PM₂.₅) < 1 mg/Nm³ • Integrated system preventing de novo dioxin formation by maintaining temperature > 800 °C and removing chlorine compounds Continuous Emission Monitoring System (CEMS): • Measured parameters: O₂, CO, CO₂, NO, NO₂, HCl, HF, TOC, particulates, humidity, pressure, temperature • Ranges: in accordance with EN 14181 (O₂ 0–25%, CO 0–4000 ppm, etc.) • Data management: USB / Internet output, software package included Certification & Compliance: • CE Declarations of Conformity for the complete system and subsystems (autoloader, ID fan, PCS) • Manufacturer ISO quality certification • Complies with EU Directives: 2006/42/EC (Machinery), 2014/35/EU (Low Voltage), 2014/30/EU (EMC) • Emission testing: QUAL 1 Test Report No. 05/24-01-2019 – confirmed compliance with 2000/76/EC Advantages: • Fully automated and safe operation with PLC control • Suitable for hazardous, medical, and industrial waste streams • Minimal residual ash and low OPEX • Heat recovery option for hot-water utilization • The system is ready for dismantling and relocation Delivery terms: EXW Devnya, Bulgaria (Ex Works – pickup from site)

Condition: excellent (used), Eccentric granulation EGR is used in the production of temperature- and shear-sensitive plastics. It is specifically designed for granulating soft PVC, rigid PVC, HFFR formulations, or compounds for low-, medium-, and high-voltage cables based on elastomers. Nwedjw Iu T Tspfx Aa Isn

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25-1361, total length: 775 mm, total width: 550 mm, total height: 775 mm, overall weight: 100 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 0.34 kW (0.46 HP), power: 0.35 kW (0.48 HP), workpiece length (max.): 525 mm, Equipment: CE marking, emergency stop, ZTV 50 Trough type vibratory machine * Highly wear resistant P.U.Lining (90 Shore) * High performance three phase current drive motor. (Italian OLI Brand – 0,34 kW) * Changeable valve for the wastewater decharging * Control panel(EU Standarts) included * Main swicth and emergency stop switch. * Timer and working hours timer * CE safety standard * Dosing pump included. * The machine has noise isolation lid and metal machine cabinet - The cover is controlled by hand manually - The sound isolation cover provides significant noise reduction when the finishing process is in play. - It also curbs water or finishing compounds spillage from the vibratory finishing machine. Njdpfxowb Hhde Aa Iown

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Dear customers, we currently offer a used lathe for wood and plastic machining, manufactured by Zimmermann, for sale. Here are some technical details of the machine: Turning length: 1,500 mm Center height over bed: 300 mm Center height over carriage: 160 mm Cross slide travel: 1,500 mm Top slide travel: 260 mm Compound slide travel: 260 mm Main spindle power: 2.2 kW Speed: 375 - 2,700 rpm Dimensions: 2,600 x 900 x 1,200 mm Weight: 650 kg Price plus VAT, which will be itemized separately on the invoice. Shipping available at an additional charge. Nsdpfx Aasxl A Tho Iswn No warranty and/or guarantee on used machines and accessories. If you have any questions, please feel free to contact us.

Condition: used, mileage: 2,03,900 km, power: 425 kW (577.84 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 26,000 kg, axle configuration: 3 axles, first registration: 07/2019, emission class: euro6, brakes: retarder, Year of construction: 2019, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, navigation system, parking heater, * Meiller three-way tipper Bordmatic left * electric sliding tarpaulin with radio remote control * snow blade mounting plate * connections for electro-hydraulic snow blade * turbo retarder clutch * long driver's cab * 1 bed * additional heating * 9 t FA Nwodpet Ttdaofx Aa Ion * 2x 13 t HA * permissible technical GVW 33000 kg * leaf-sprung FA and HA * power shift gears * comfort locking system * compressed air horn * sun visor * electric. Windows and mirrors * Differential lock * CB radio * Toll preparation * Multimedia radio * LED daytime running lights * Stone chip protection grille for lighting * Rotating beacons * Engine 15.6 L 425 KW * Turbo compound * High Performance Engine Brake * MB 131-2C auxiliary drive * Duomatik trailer brake system additional * AHK D50 * Rear view camera, turning camera on the right * Cool box under the bed * Additional headlights on the lamp bracket * Hydraulic for tipping trailer * Front tires 385/65R22.5 9/9 mm * Rear tires 315/80R22.5 9/9 and 9/9 mm * Rear tires 315/80R22.5 19/18 and 18/18 mm * and much more * !!! Errors, changes and prior sale reserved!!!