Used Compounding for sale (184)

Condition: used, functionality: fully functional, Polymer Laboratories PL-ELS 1000 Evaporative Light Scattering Detector. Laboratories is a completely new design of high sensitivity Evaporative Light Scattering (ELS) Detector for HPLC, microHPLC and GPC/SEC. This ELS detector has replaced the RI for the detection of solutes with no UV chromophore, giving enhanced performance with the benefits over an RI of improved sensitivity, excellent baseline stability, gradient compatability, and providing a positive response for all solute/solvent combinations. Features: Bwjdpfst Uk Dmox Abzow -Small footprint for laboratory convenience -Improved sensitivity -Low dispersion -Excellent baseline stability -Wide gradient compatibility -Rapid equilibrium -Detection of even relatively volatile compounds -The PL-ELS 1000 from Polymer Good working condition. Please check out our other listings as well.

Condition: used, Type: 25 x 120 Straight Bed Lathe Bwodpfx Ajwmlcksbzjw Distance between centers: 72″ Swing over bed: 26″ Swing over cross-slide: 16″ Spindle speeds: 7.4 to 600 (24) Spindle bore: 4 1/8 Full length screw cutting: yes Chuck mounting: D1-11 Tailstock taper: No.5 Morse Power compound Power traverse Slide along chuck guard and we have rear splash guarding Main motor: 15kw 3 phase Weight: approx 5 tons Condition: Slideways very good Can also be repainted at extra cost Cleaned and serviced

Year of construction: 2025, condition: new, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Bedpfeiv H Ekox Abzsww Inspect available machines at our factory in Königswinter. We can also provide machines in other dimensions.

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Bedpfsiyyf Ijx Abzoww Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.

Condition: ready for operation (used), Year of construction: 2013, For sale is a used, fully functional refrigeration system with 4 Bitzer compressors, previously used in a small to medium-sized grocery store. The system supplied 4 cold storage rooms and wall-mounted refrigerated cabinets and was regularly serviced. 🔧 Technical details: 4 Bitzer compressors Refrigerant: R404A Includes control cabinet with frequency converter and controllers Condenser not included (sold separately) Weight: Unit approx. 550 kg, control cabinet approx. 250 kg Test log and technical documentation available upon request 📅 Operating life: The system was in operation until mid-April 2025 and is therefore demonstrably functional. It was professionally dismantled as part of an insolvency procedure. 📍 Viewing & Pickup: Viewings are possible by appointment at any time in 8943 Aigen 90, Aigen im Ennstal, Austria Bwjdjwk U N Ujpfx Abzsw A forklift is available for pickup. 📩 If you are interested or have any further questions, please feel free to contact me! Price upon request.

Condition: used, We offer a large and diverse batch of used liquid pumps, sourced from various reputable manufacturers. These pumps vary in size, flow rate, and configuration, including centrifugal pumps, gear pumps, and customer-specific models. The full list includes over 150 units, all clearly labeled by type and model. Bwsdpfow Et Eqox Abzjw These liquid pumps are sold strictly in their current condition (as-is). They have been visually inspected for identification and listing purposes and were removed from functioning installations. Key Notes: Condition: As-Is (used, untested, without warranty) Pricing: Offered at a competitive fixed price Packaging: All pump packages are prepared by HOS BV Volume: Large, mixed batch of units; ideal for resellers, refurbishers, or parts recovery For a full list of pump types and models, please contact us.

Condition: used, functionality: fully functional, Thermo Finnigan Focus GC. Software + 2000 euros. Bwjdpfjt U Sqzsx Abzow The Thermo Scientific FOCUS GC excels in precise analytical applications with a 50 to 375 degree Celcius temperature range for accurate separation of complex mixtures. Its rapid heating and cooling, featuring a 0.1 to 120˚C/min temperature ramp, enhances efficiency. The advanced detector ensures exceptional precision in detecting trace compounds. Ideal for diverse analytical challenges, the FOCUS GC is a reliable and quantifiable gas chromatography tool for high-productivity laboratories. Good working condition. Please check out our other listings as well.

Condition: excellent (used), mileage: 31,000 km, axle configuration: 4x4, gearing type: automatic, Year of construction: 2000, 2 identical vehicles available! Scania 124C 420 4x4 water tender 4x4 drive ATW pump, 3200 l / min at 8 bar High pressure 300 l/min at 40 bar Foam proportioning Hale Foam, CAFS compressed air foam system Water tank: 3400 liters Foam compound class A: 200 liters Foam concentrate class B: 300 liters Cable winch 54 kN Light mast with 4x 1000W Power generator 32kVA Bwedpfx Ajtixlmsbzow Vehicle length: 8100 mm Vehicle width: 2750 mm Vehicle height: 3350 mm Wheelbase: 3900 mm

Condition: as good as new (ex-display), functionality: fully functional, rotational speed (max.): 180 rpm, filling weight (max.): 75,000 g, grinding spindle motor power: 4,000 W, TECHNICAL DETAILS Motor power: 4 kW Machine capacity: 120 l Load: max. 75 kg per load Speed range: 50 to 180 rpm Recommended setting: 115 to 135 rpm Container details Working bowl diameter: 640 mm Working bowl lining: PU, 26 mm, yellow Workpiece capacity per load: 55 l MACHINE DETAILS Dimensions (L × W × H): 1,700 × 1,300 × 2,200 mm Weight: 700 kg Electrical and water connections Power connection: 3 × 400 V Bwsdpfx Aowa Ul Usbzow Fuse protection: 16 A CEE Water connection: G ¾ ISO 228-1 EQUIPMENT - Touchscreen with manual operation - Continuous speed adjustment via frequency converter - Stainless steel discharge box - Manually adjustable ball valve for compound addition - Color finish in RAL 7015/7035

Year of construction: 2006, operating hours: 82,068 h, condition: good (used), functionality: fully functional, machine/vehicle number: 258-22, Moving column machine in steel-concrete composite construction with workpiece changing device. Low-maintenance model from the world-renowned manufacturer CHIRON. Double spindle - vertical - machining center incl. chip conveyor KNOLL AE 1058.009 and a compound unit (already dismantled). Prescribed maintenance intervals for plant and plant parts have always been observed. TECHNICAL DETAILS Drilling capacity in steel: 60: 2 x 6 36 mm (with insert drill) Guides: with long term grease lubrication speed range: 20-12.000 rpm CNC control: SIEMENS 840D spindle distance in X-axis: 250 mm X-axis: 300 mm Y-axis: 400 mm Z-axis: 425 mm (with variable tool change plane) rapid traverse speed 60 m/min in X-, Y- and Z-axis Bwodpfxjmt A Ivs Abzew Main spindle drive: 1 piece with 2 AC motors power at 100 % ED: 9,5 kW power at 15 % ED:14,0 kW Drive: digital direct drives with indirect absolute path measuring system (no reference point approach) tool places: 212 Tool diameter: max. 65 mm Tool diameter with free neighboring places: max. 175 mm Tool weight: max. 2.5 kg (5.0 kg at 2 stations) Tool change time: approx. 0.9 s (depending on control) Chip-to-chip time: approx. 2.1 s (control-dependent) Workpiece changing device: 0 / 180 Tool holder: HSK A 63 1 MACHINE DETAILS type of current: 3 / N / PE - 50/60 Hz operating voltage: 400 V power: 44 kVA rated current: 63 A Coolant system HL 450 / 900 LATE CONVEYOR Manufacturer: KNOLL Type: AE 1058.009 Year of manufacture: 2006 EQUIPMENT - CHIRON maintenance manual on screen - Operating hours and piece counter - Socket 230 V - Socket for portable mini handwheel - Control cabinet cooler as door-mounted unit - Signal lamp - splash guard cladding - chip conveyor - mini control panel - Rinsing gun - Central pneumatic connection - Fixture flushing - 70 bar HP pump - 1 internal cooling package with suction unit - Fully enclosed working chamber - Extraction unit with air cleaner - Extraction capacity 800 m³/h - CHIRON mold life monitoring with: - Automatic loading door of the splash guard - "opening" and "closing", actuation via two-hand start release - Integrated IWW 0/180° workpiece changing device - Chiron Lasercontrol Single F500 - Ethernet connection RJ45 at the control cabinet instead of in the control panel - Pneumatic and hydraulic connections - Central hydraulic and pneumatic connection prepared for max. 20 connections, 6 connections are designed including connection couplings, 4 of them for hydraulics, max. 210 bar and 2 for uncontrolled pneumatics. - 4 Additional hydraulic connection(s) - Hydraulic power unit - 2 Hydraulic aggregate extension for further clamping circuits

Year of construction: 2022, operating hours: 0 h, condition: new, Mobile cleaning centrifuge including buffer storage for dirty water, agitator and double membrane compressed air pump. - new machine - numerous other variants and special designs on request Machine type: Process water centrifuge solid-liquid Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Application: vibratory finishing technology, general solid-liquid separation, cooling lubricant processing, wet blasting systems, ... Benefits: - High discharge through acceleration forces acting in the system of over 1800 times the acceleration of gravity - Management of the process water in a circuit, which minimizes operating costs and protects the environment - Saving of expensive additives for the vibratory grinding process (compound) - Economical and efficient separation of solid particles from a mixture - Economical and efficient separation of solid particles from a mixture - Suitable for process liquids up to 70 ° C (optional cooling available) - frequency-controlled motor drive for smooth acceleration and braking of the rotor Are you looking for innovative solutions for surface treatment and process water treatment? We offer a wide range of systems in the field of vibratory grinding, drying and process water technology, which are precisely tailored to your application. From development to production: We deliver all of our products from a single source and everything is "Made in Germany". ----- Please just contact us, we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). Bsdpef Sqfqsfx Abzeww The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Condition: good (used), Joke lapping machine EL 600 - with accessories - with lapping compound pump & pressure device Bodpfewv Ha Nex Abzsww Good condition, fully functional, can be inspected and tested on site. International shipping available. Inspection: Please note that, to avoid misunderstandings, the item can be inspected and tested under power before purchase. Kindly ask any questions prior to purchasing to prevent any ambiguities. For general inquiries or to schedule an inspection appointment, I am available at the phone number provided above or below at any time. Subject to errors in description and prior sale. VAT is itemized separately on my invoices. Shipping via freight forwarder.

Condition: excellent (used), Continuous rotary table HAU R60 - 1800, with 60 workpiece spindles, mounted in a pitch circle diameter of 1800mm, 3 polishing units with 7,5 kW each, polishing shaft diameter of 50 mm, width of polishing wheel 2 x max. 400 mm and 1 x 280 mm, diameter of polishing wheel s max. 420 mm, motorized longitudinal and height adjustment of polishing units, machine equipped with liquid compound feeding system More pictures on demand Bedpfx Abem Nbubszoww

Condition: used, mileage: 32,610 km, power: 162 kW (220.26 HP), first registration: 10/1996, overall weight: 10,500 kg, fuel type: diesel, color: red, axle configuration: 4x2, maximum load weight: 4,140 kg, empty load weight: 6,360 kg, tire size: 235/75R17,5, wheelbase: 3,650 mm, driver cabin: other, gearing type: mechanical, emission class: euro2, suspension: steel, Equipment: ABS, additional headlights, cabin, differential lock, low noise, power assisted steering, trailer coupling, Vehicle location: Bovenden, Doka, double bench seat, switch 6, ABS (anti-lock braking system), differential lock, work lights, storage box, leaf suspension, low-noise G1, U-protection, roof hatch, environmental badge red Wheelbase: 3650 mm Body: Fire-fighting support vehicle with Ziegler box body, 1250 l extinguishing water tank, 100 l foam compound tank & FP 16/8 pump Sales to tradesmen or export are subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bwodpfxjvhkfnj Abzew - .

Condition: used, machine/vehicle number: 33548, turning diameter over bed:533 mm Bsdpfx Abjcxxucezoww turning diameter over slide rest:340 mm turning length:2000 mm centre height:270 mm turning diameter in the gap:720 mm spindle bore:80 mm :12 turning speed range:25 - 1500 U/min feeds::76 travel of compound slide-rest:110 mm spindle travel:360 mm taper MK:4 bed width:370 mm weight of the machine ca.:2,87 t dimensions of the machine ca.:4,1 x 0,95 m

Condition: excellent (used), Year of construction: 2020, Maximum cutting diameter 150mm, spindle bore 31.75mm, Bwedpfxewcp E Ue Abzsw distance between centre 457mm, swing over carriage 230mm, swing 280mm, spindle speed 50-4000rpm, spindle power 3Hp, Compound slide travel 76mm, cross travel 152mm, 3 & 4 jaw chucks, fixed steady, digital screwcutting, taper turning attachment , coolant.

Condition: new, Cleaning centrifuge including buffer storage for dirty water, agitator and double-diaphragm compressed air pump. - new machine - numerous other variants and special designs on request Machine type: process water centrifuge solid-liquid Manufacturer: Eurotec Innovation GmbH Model: ZS38 PE Application: vibratory finishing technology, general solid-liquid separation, coolant processing, wet blasting, processing of industrial liquids Benefits: - High discharge capacity due to acceleration forces acting in the system of more than 1800 times the acceleration due to gravity - Management of the process water in a circuit, which minimizes operating costs and protects the environment - Saving of expensive additives for the vibratory finishing process (compound) Bwjdpehrh Ntefx Abzjw - Economical and efficient separation of solid particles from a mixture - Economical and efficient separation of solid particles from a mixture - Suitable for process liquids up to 70°C (optional cooling available) - Frequency-controlled motor drive for smooth acceleration and deceleration of the rotor Are you looking for innovative solutions for surface treatment and process water treatment? We offer a wide range of systems from the field of vibratory finishing, drying and process water technology that are exactly right for your application. From development to production: We supply all our products from a single source and everything is "Made in Germany". ----- Please contact us, we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation takes place by means of telecommunications (email, fax, telephone, message portal), where we first make you a non-binding offer, in which we also inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase/conclusion of contract takes place.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20250108, total height: 2,200 mm, overall weight: 700 kg, total length: 1,700 mm, total width: 1,300 mm, type of input current: three-phase, workpiece weight (max.): 75 kg, tank capacity: 120 l, usable tank capacity: 60 l, input voltage: 400 V, rotational speed (min.): 50 rpm, rotational speed (max.): 180 rpm, power: 4 kW (5.44 HP), input current: 16 A, warranty duration: 12 months, Equipment: rotational speed infinitely variable, The Turbo-Line 120 “S” model has a stainless steel ejection box mounted directly on the deburring machine. When the bowl lowers, the chips fall through a grid while the parts to be deburred remain on top. This Turbo-Line machine includes a 120-litre drum with vertical, straight sides and a separate base that rotates at an adjustable speed, normally between 115 and 135 rpm, but adjustable from 50 to 180 rpm. During operation, the grinding bodies inside the bowl create a uniform, spiral movement reminiscent of a twisted sausage. All areas of the machine that come into contact with the product, including the drum and the base, are coated with at least 26 mm of yellow polyurethane (PU) to ensure a long service life. Bedpfxjvvu Snj Abzoww The 120 liter work bowl can process up to 50-60 liters of product per batch, depending on the shape and size of the parts. The deburring parameters such as time and speed are individually controlled via a manual touch screen. The addition of water and compound is done via a manually adjustable ball valve, which is included in the delivery. The finished products are discharged by tilting the bowl, a process controlled via the touch screen. The emptying speed is also adjustable via the frequency converter on the touch screen.

Condition: excellent (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, total length: 5,700 mm, total width: 1,710 mm, total height: 2,780 mm, operating temperature: 95 °C, For sale, used but in a great functional condition A continuous synthesis reactor for organic compounds, based on microwave system, built in ATEX class II norm 3 raw material tanks, 100 L each 2 top entry agitators 1 CIP tank 2 finished product tanks, 50 L each 3 pumps 1 microwave with 2 generators (2450 MHz), 12 kW power output, fully conform to EU safety standards All high quality materials steel 1.4404, PTFE, Duran glass or similar High quality components (tanks, pumps etc), sensors and transducers, made in EU - full list available PLC controlled via 24V DC, with dedicated software Documentation available The UNIT has been now professionally decomissioned and is stored on palettes, ready for pickup. Bodpfxjvy T Ivs Abzeww Purchase of selected components (such as tanks or pumps) is also welcome.

Condition: good (used), Voss Böwe Passat type 38 E 104 boiling kettle Description: - Stainless steel body - Stable welded - Rounded corners/edges Technical data: Type 80 E 104 Type of current 3N Voltage 380 volt Control voltage 220 volts Rated current 20,4 A Bodpfx Abjlik Hnjzoww frequency 50 Hz Power 12,45 kW Weight 85 kg Dimensions boiler ca. ø 39cm height 40cm Dimensions body ca. 51, x 89,5 x 69,5cm (WxDxL) Calculated volume 40 liters Scope of delivery: 1 x Voss Böwe Passat type 38 E 104 cooking kettle (partw. without side plate because you stood in the compound) Article condition: used, to the controls contactors & switches have to be repositioned Circuit diagram available. More items - new and used - you will find in our store! International shipping costs on request!

Year of construction: 2025, condition: new, Single needle compound feed sewing machine With - thread cutter - bachtack - quick stroke - foot lever Bwsdewi I Saepfx Abzow - Double stitch length 12 mm - M-type motor with panel - electronic handwheel Merhaletex sewing machine Merhaletex has been around for over 20 years and is always there for our customers. That is our strength. We can offer you the entire program and translate your wishes into the right sewing machine for your work. Of course, the service does not stop with the delivery of a sewing machine. We are also there for you after delivery. New and used industrial sewing machines FOR ALL INFORMATION PLEASE CONTACT US NOTHING CHEAPER THAN AT MERHALETEX 8500 EURO EX VAT EX SHIPPING We buy and sell industrial sewing machines NEW and used The advertisement was automatically translated. Translation errors are possible.

Condition: good (used), Year of construction: 2018, total length: 930 mm, total width: 800 mm, total height: 910 mm, power: 9 kW (12.24 HP), input voltage: 400 V, Outer casing and feet in stainless steel. Adjustable worktop height, ranging from 840 to 900 mm. Strong double-walled self-balancing lid,2 mm thick AISI 304 stainless steel cooking pot, with bottom made in compound . Thermostatically-controlled cooking temperature range from 100 to 280°C. Electric model: Armoured incoloy heaters for cooking operations. IPX5 protection against water splashes. Bwsdotr Ayqepfx Abzjw

Condition: ready for operation (used), Condition New Stock Number 37132 This listing is for a Brand New Harvest Right Medium Pharmaceutical PRO Freeze Dryer sold through We are stock holders in UK Price Before VAT - £4500 Both long term and short term rental available. Weekly £500+ transport Monthly £1500 + transport Harvest Right’s Pro Pharmaceutical Freeze Dryer removes water from plants and organic compounds while they are in a frozen state. This locks in the freshness of herbs and plants. Their appearance, nutritional content, and potency remain the same as when they were fresh. Bwjdpfx Aouybfyebzsw Freeze drying completely removes water in about 24 hours. No other preservation method comes close to removing water this quickly. This is important because the longer a harvested plant or compound retains water, the greater the chance it has of spoiling and losing nutrition and potency. What’s IncludedMedium Pharma Freeze DryerPremier Vacuum PumpVacuum Pump OilOil FilterStainless Steel Trays (set of 7)Guide to Freeze Drying Key Features Benefits- The freeze dryer has built in intelligence. It automaticallyand perfectly manages the freeze drying process- The ideal vacuum pressure and drying temperature is maintainedfor each material – preserves freshness and potency- 6.5 square feet of tray space- Shelving unit holds 7 trays (each tray 190.5mm W x 457.2mm L x19mmH)- 4 liters of ice capacity Warranty1 Year international warranty provided by Harvest Right. DimensionsOverall product dimensions: 660mm W x 540mm D x 724mm HPerfect for a counter top, cart or table. Weight 58Kg PowerStandard UK 230v Shipping Info- The medium pharmaceutical freeze dryer ships in one packagewith a total weight of 160KG- Item will be delivered in international shipping crate (mustbe purchased from Harvest Right when exporting machines out of USA)- One freeze dryer in fully encased shipping crate: 920 x 770 x1500H - If you would like to collect from site, we would be able tocut down the crate to fit in smaller vans: 920 x 770 x 1050H + extra box ofparts MaintenanceSimply filter and replace oil. Takes one or two minutes. Industrial Grade DesignHigh quality, super high vacuumHigh evacuation performanceLight, fast, energy efficient Technical SpecificationsOil: Harvest Right Oil, Robinair Premium High Vacuum Pump Oil orJB Industries Black Gold Vacuum Pump Oil OnlyDC MotorEnergy EfficientVoltage: Standard, 230vDimensions: 410mm W x 152mm D x 307mm HWeight: 6.57KGNoise: 52 decibels Product ComparisonIndustrial Oil Pump vs Standard Oil Pump Oil ChangesThis new Industrial Pump rarely needs to have the oil changed orfiltered. The pump has a gas ballast feature that makes it so water does notstay in the oil. Because of this, the oil in the pump will be pristine andclear, even after 30 or more batches. You simply won’t need to change the oiluntil you have run 25 to 40 batches. Whereas, the oil in the standard vacuumpump needs to be changed and filtered every 4 or 5 batches (when using the new3/8 inch vacuum hose). Vacuum PressureUnder cold and hot conditions the Industrial Pump will pull adeeper vacuum than the Standard Pump. Under cold conditions the difference is.05 Pascal for the Industrial Pump and .08 Pascal for the Standard reas, under warm conditions the difference is much greater: .05 Pascal forthe Industrial Pump and 2.05 Pascal for the Standard Pump. Hence, the Industrial Pump is especially not affected by warm,ambient conditions. When temperatures rise, it will pull a vacuum far betterthan the Standard Pu

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20241202, total height: 860 mm, overall weight: 320 kg, total length: 1,170 mm, total width: 1,170 mm, type of input current: three-phase, tank capacity: 150 l, usable tank capacity: 100 l, input voltage: 400 V, workpiece width (max.): 170 mm, workpiece height (max.): 170 mm, outer diameter: 170 mm, workpiece length (max.): 170 mm, inner dimension width: 260 mm, power: 2.2 kW (2.99 HP), input frequency: 50 Hz, warranty duration: 12 months, load capacity: 60 kg, Equipment: rotational speed infinitely variable, The round vibrator Vibra-Line DK impresses with an open, curved container, which has a capacity of 150 liters. This model is equipped with an air-controlled automatic emptying system and a a sound-insulated lid, which ensures convenient and quiet operation. The U-shaped inner container has a 22 mm thick polyurethane (PU) coating, which ensures exceptional resistance to process wear. The capacity of 150 liters allows for approximately 50 to 100 liters of metal parts per load, depending on their shape and size. The wide drum and low discharge height make it much easier to unload the processed parts. The machine is controlled by a frequency converter with infinitely variable speed control, which is operated via a 5.5-inch touchscreen. Bsdpoviu Ehjfx Abzoww Process times, languages and speeds can be adjusted quickly and easily. and speeds can be adjusted quickly and easily. The control system also controls two external connections, which can be used for process water and compound dosing. The Vibra-Line 150DK circular vibrator is supplied as a plug-and-play solution and only requires a 16 amp CEE plug, 4 bar compressed air and a water connection for commissioning. a water connection for commissioning. Our devices comply with the EC machine/device directives and are supplied with manufacturer's declaration of conformity and CE mark.

Condition: ready for operation (used), Condition Used Stock Number 8B This listing is for a Hirschman Pipetus 100 Rechargeable Pipette Controlle The unit is in full working condition and is ready for immediate release Bedpfxowf S T Te Abzsww For all pipetting from 0.1 ml to 200 ml Key Features: Wide Volume Range: Compatible with all measuring, volumetric, and Pasteur pipettes from 0.1 ml to 200 ml Precision Dispensing: Fine dispensing valves with ceramic compound valve pins offer maximum chemical resistance and zero wear Adjustable Speeds: Five finely tuned performance stages allow for exact and continuously variable pumping and suction speeds for both filling and venting Ergonomic Design: Crafted for non-fatiguing, long-term use Low Noise Operation: Pump motor operates quietly and without vibration Clear Display: Integrated color display shows pipetting mode, speed level, and battery status Advanced Charging System: NiMH rechargeable battery Inductive, contact-free charging Microprocessor-controlled charge cycle Included Accessories: Inductive charging and park station Standard wall bracket Reliable Sealing: Tight silicone adapter seals all pipettes securely PTFE Filter Protection: Built-in hydrophobic PTFE diaphragm filter (0.2 µm pore size) prevents contamination.