Used Condensation Dryer for sale (2,516)

Condition: used, Compressed Air Dryer PARKER HIROSS for Compressor Systems Mechanical Condensate Separator, Water Separator Refrigeration Dryer with water-cooled aftercooler for removal of water vapor and cooling of compressed air or gases. 1 unit Aftercooler Type WFN009 DHH16 Duodpfjdzqn Uox Ad Ijp Air flow rate (standard): 540 m3/h = 9,000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1,020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1,030 x 850 x 200 mm + 1 unit Water Separator Type CSP 008 Standard flow rate: 480 m3/h = 8,000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 unit Mechanical Condensate Separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss All components assembled as shown in the photos Mounted height (upright): 2,000 mm Total weight approx. 40 kg 2 identical units available

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). Duedoq Nfuzepfx Ad Iep 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Duodjq Igyvopfx Ad Iop Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: used, Year of construction: 2010, functionality: fully functional, Used Mark compressor with dryer. Used, in good working condition. Ready for pickup. Dujdpfx Ajwprvisd Isp

Condition: used, Year of construction: 2017, functionality: fully functional, For sale: Fully operational and lightly used belt dryer from New eco-tec. Optionally available with air scrubber and 180m³ silo for dried goods. The plant was in operation until recently and is ready for immediate use. The system spans 2 containers and has a belt length of 24m, rated for 1.5MW thermal output. The belt dryer is entirely made of stainless steel inside the containers. Viewing by appointment. Djdpfxjyr Aiqe Ad Ijup

Year of construction: 2013, condition: used, functionality: fully functional, B+B Anlagenbau TR 100/200-P-V – Mechanical Dryer – Good Condition – Dismantled in Working Order For sale: B+B Anlagenbau type TR 100/200-P-V. Djdpfxjym Ag Es Ad Ieup The machine is in good condition and was dismantled while fully operational. Technically sound; only normal wear parts show wear. Worn wear parts: - Screens - Screen support edges (mounting frames) - Sealing rubbers The paddles inside the machine are still in good condition. A large number of spare paddles are included in the sale. Main drive motor: 55 kW Additional loose parts included: - Spare drive motor - Main bearing (2x) - Fan housing - Pulley - Gearbox for screen scraper drive Please note: No spare screens are included. However, contact details of the supplier for the screens and screen support edges will be provided. Machine is available immediately.

Condition: excellent (used), Year of construction: 2004, operating hours: 1,14,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Dodsrp D Uxepfx Ad Ioup Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm width: 1600mm height: 2000mm weight: 4400 kg

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: DR047-13 / 10015861, Complete resin dryer system for injection moulding production. The system has been used sparingly and is in good condition. The system consists of multiple components that can also be sold separately, as follows: 1 resin dryer Moretto VTH 31 V, SN 1906041 / 2019 2 resin dryers Plastic Systems, SN DR047-13 / 10015861 / 2013, capacity 370 kg each Dwjbk Rkjwx E Nbjm Eceb Dusdpfswx E Nbox Ad Ijp 23 resin silos with the following capacities: - 54 kg * 4 pcs - 105 kg * 6 pcs - 113 kg * 2 pcs - 75 kg * 2 pcs - 56 kg * 4 pcs - 22 kg * 2 pcs - 140 kg * 1 pc - 210 kg * 1 pc - 420 kg * 1 pc Distribution pipelines. Stainless steel pipes and fittings available. Do not hesitate to contact us for a personalised price quote.

Condition: like new (used), Chanber size: 280x180x500mm upper Duodpfsd Sm Diox Ad Iep 280x130x450mm lower Max temperature: 700 C °

Condition: excellent (used), Year of construction: 2022, IES screw compressed air units supply a continuous, reliable flow of compressed air directly to the point of use without requiring a dedicated room. The ECB – SCB range, made according to high quality standards, uses components by leading companies on the market, ensuring reliability and traceability. 7.5 KW 8 Bar 1000 lts/min Dedsxaxr Njpfx Ad Ioup Very low running hours - 1351 run hours Complete with three filter set

Condition: new, Year of construction: 2025, functionality: fully functional, sheet thickness (max.): 5 mm, total length: 950 mm, total width: 850 mm, total height: 1,175 mm, overall weight: 80 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.1 kW (1.50 HP), power: 1.1 kW (1.50 HP), Equipment: documentation/manual, CENTRIFUGAL DRYER MACHINE METAL CENTRIFUGAL DRYER Technical Specifications: Dryer Body Material: 5 mm iron thickness, painted with acid-resistant paint. Diameter: 58 cm Height: 80 cm Drying Basket Material: 1.5 mm stainless steel thickness, electropolished. Diameter: 44 cm Height: 32 cm Basket Volume: 50 liters Speed: 3000 rpm Centrifugal Motor: Power: 1.1 kW 3000 rpm Drying Fan Material: Aluminum Cast Motor Power: 0.25 kW Speed: 3000 rpm Heater Power: 2 kW heating tube External Dimensions: Djdpjrkl Unefx Ad Ioup L: 850 mm W: 850 mm H: 1175 mm

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,370 mm, total width: 1,370 mm, total height: 1,020 mm, overall weight: 360 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.9 kW (2.58 HP), power: 1.9 kW (2.58 HP), workpiece width (max.): 240 mm, workpiece length (max.): 240 mm, ZDV Series - Circular Type Dryers For drying after deburring and polishing Corn granule is used. Various volumes in the range of 125lt - 1650lt Includes seperating system- Resistance heated Drying for all kinds of metal and non-metal materials Suitable for automation system Optional accessories Dryer machines are used to dry the wet surfaces of the parts after the process in surface finishing machines where deburring, polishing, etc. are performed. At the same time, dryer machines help to prevent corrosion of the parts Corn cobs are used in dryer machines. Hot corn cobs absorb water from the surface of the parts during process. The dryer machines have a heating system with resistance. By the help of heating system, the drying speed increases and it saves time and energy. On the machine, there is a material loading point in order to transfer wet parts to the machine easily and a discharge slider which can take out the parts after drying easily. During drying process, the parts and corn cobs move through the ramp in the bowl to the self-discharge way. Activating the slider is enough to take out the dried parts. Thanks to ergonomically designedchassis height and springs, staff can work with high efficiency. Increased resistance against vibrations, rigid and reinforced support construction; adjustable insulators flexibly mounted to absorb vibrations are some of the distinctive design features of the machine chassis. Electrical panels with CE Certificate designed in accordance with EU standards are used. There are main switch and emergency stop switch. The working time controller and time clock are included in the standard equipment. Three-phase electrical connection is used. It can work integrated with automation systems with PLC software. Dsdsl Sm N Topfx Ad Ijup Dust absorbing system is available as an option. The dimensions of the dryer machines are designed to work integrated with the previous processes surface finishing machines. Therefore, the products from the first process are able to be transferred to the material loading point of the dryer automatically.

Condition: new, Year of construction: 2014, functionality: fully functional, UNUSED TEMA INDUSTRIAL DRYING PLANT – FLUID BED DRYER – COMPLETE SYSTEM A complete "Industrial Drying Plant manufactured by TEMA Process B.V. (Netherlands)" is available for sale. The system is based on a Shaking Fluid Bed Dryer technology and was originally designed for drying industrial materials such as sludge, minerals, chemical feedstocks and other high-moisture industrial products. The equipment has never been installed or commissioned and has been stored since delivery. Operating hours: 0 This is not just a dryer, but a complete industrial drying plant including conveying, filtration and control systems. --- # General Information Dodpfxeyrxwws Ad Isup Manufacturer: TEMA Process B.V. (Netherlands) System type: Shaking Fluid Bed Dryer / Cooler Year of manufacture: 2014 Condition: Unused – Never installed – Stored since purchase --- # Capacity * Water evaporation capacity: approx. 2.1 t/h * Dryer feed capacity: approx. 12,000 kg/h * Final product output: approx. 1,900 kg/h --- # Moisture Range Feed moisture: 40 – 60 % Final moisture: 10 – 15 % --- # Drying System * Shaking Fluid Bed Dryer with integrated cooling section * Drying air temperature: 120 – 250°C (nominal 190°C) * Direct fired natural gas air heater * Drying air flow: ~44,000 kg/h --- # Dryer Dimensions Fluidized bed area: 8.4 m² Dryer size: 7.3 m x 1.15 m --- # Energy Consumption Installed electrical power: ~218 kW Electrical consumption: ~160 kW Natural gas consumption: max. 190 Nm³/h --- # Scope of Supply (Complete Plant) The system includes the following equipment: Drying Unit * Shaking Fluid Bed Dryer / Cooler * Air supply system * Direct fired natural gas air heater * Recirculation fan * Combustion air fan * Cooling air fan --- Dust Separation and Filtration 2 Cyclone separators 1 Baghouse Filter Dust rotary valve Exhaust fan and ducting system 4 Explosion relief panels --- Material Handling System * Twin shaft paddle mixer * Granulator * Screw conveyors * Double screw conveyor * Bucket elevator * Product conveying system --- Automation and Control * MCC / PLC control system * Siemens S7-300 PLC platform * HMI operator panel * Upper control level ready for SCADA integration --- # Typical Applications The system can be used for drying various industrial materials including: * Industrial sludge * Minerals and mining products * Chemical raw materials * Recycling materials * Paper and pulp industry residues * Fertilizer and organic materials * Biomass and other industrial feedstocks --- Condition * Never installed * Never commissioned * Stored since delivery * Complete plant available --- Location Turkey The equipment can be inspected on site. Additional technical documentation and photos are available for serious buyers.

Condition: excellent (used), Stainless steel mixing tank with liftable, heatable lid. Manufacturer: Essiccatore Granplast Type: AS2 Overall dimensions: 800 x 950 x 1900 mm Dujdpsizwn Tofx Ad Iop Tank size: diameter 800 x 200 mm

Condition: excellent (used), Year of construction: 2018, operating hours: 50,708 h, functionality: fully functional, Compressed air dryer Atlas Copco FD1750+ 14 bar 105 m3/min Dedpfxsyr A Uys Ad Ioup

Condition: good (used), Year of construction: 2017, ESC Screen Printing System 1100-2C/IR with IR Dryer Manufacturer: ESC – Europa-Siebdruck-Centrum GmbH & Co. KG Model designation according to nameplates: PAJD 1100-2C/IR and Perfection 1100 2C/IR Year of manufacture according to nameplates: 2016 and 2017 Machine/Factory numbers: 9960-14-1065 / 11661 Electrical connection: 400 V, 50 Hz Rated current: 120 A (nameplate PAJD) Rated power: 76 kW (nameplate Perfection) Dusdpfxoyrm Hye Ad Isp Protection class: IP40 Belt type: IR temperature tunnel with conveyor belt (width as per series: 1100 mm) Assembly: IR drying unit for screen printing or coating processes Design: Enclosed safety housing with access doors Application area: Drying/cure of printed or coated components Location: Schierling Inspection possible by appointment.

Condition: excellent (used), Year of construction: 2018, operating hours: 50,708 h, functionality: fully functional, Compressed air refrigeration dryer FD1750+ 400V/50 Hz 14.00 bar 105.00 m³/min Dsdpfx Aeyrxtfod Ioup

Year of construction: 2017, condition: not inspected (used), functionality: unexamined, machine/vehicle number: 399285140002, No reserve price – guaranteed sale to the highest bidder! Placing a bid obliges you to collect within the deadline between 04.05.26 and 07.05.26. TECHNICAL DETAILS For technical specifications, please refer to the nameplate shown in the pictures! MACHINE DETAILS Djdpfeyr Niwjx Ad Isup Dimensions & Weight Dimensions (L x W x H): 800 x 500 x 900 mm Machine weight: 150 kg External reference: Lot 73

Condition: like new (used), Year of construction: 2019, pressure (max.): 16 bar, Adsorption Dryer Parker Zander K-MT 35-95/D3 Generation 3 Manufacturer: Parker Hannifin Manufacturing S.r.l. / Parker Zander Model: K-MT 35 Version: K-MT 35-95/D3 Generation 3 Serial number: 399893960001 Year of manufacture: 2019 Voltage: 230 V Frequency: 50–60 Hz Protection class: IP65 Max. operating pressure: 16 barg Min. operating temperature: 1 °C Max. operating temperature: 50 °C Condition: new / unused Dusdpfxoyrunrj Ad Iop Machine type: adsorption dryer for compressed air

Condition: used, Year of construction: 2018, functionality: unexamined, input voltage: 400 V, overall weight: 472 kg, input current: 19 A, conveyor belt width: 640 mm, input frequency: 50 Hz, temperature: 180 °C, Brand: Tesoma Model: Mini Standard Year of manufacture: 2018 Serial number: 21700647 Voltage: 400 V Frequency (Hz): 50 Amperage (A): 19 Dimensions LxWxH (mm): 2220 x 1120 x 1330 Weight (kg) approx.: 472 Stock quantity: 1 Manufactured in: Germany Comments: Max contributable solvent volume 0.30 kg/hr, max waste air volume flow 50 m³/hr, conveyor 2220 x 640 mm, 13 kW. Duedpoytf Npefx Ad Iep

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Atlas Copco FX13 compressed air dryer, 10.02 m³/min Dsdpfxjyrdife Ad Ijup

Year of construction: 2011, condition: used, Rated power: 5.5 kW Motor speed: 2930 rpm Max. operating pressure: 11 bar Dryer type: CT 8 Refrigerant: R134a Refrigerant charge: 0.260 kg Max. operating pressure (cooling system) HP 21 bar / LP 16 bar incl. Aquamat CF 3 oil-water separator Storage location: supplier Duedpfxoxtnvks Ad Iep

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Duodpexgq I Nsfx Ad Isp Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Dujdpfoxgr Hgox Ad Ijp A total of four dryers of this model are available.

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Duedpfx Adoxgttzs Iep Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw A total of four dryers of this model are available.