3
Product features
One model for all applications from a vapor temperature of -45℃ to 10 °C
The perfect solution for cooling and freezing applications with variable loads and high energy efficiency requirements, such as supermarkets, cold stores, air flow cooling, freezers, etc.
VRV (Variable Refrigerant Volume) technology for a flexible range of applications
Low noise including operation in "night mode"
Dedicated unit allowing multi combinations of 2 x 15 HP or 2 x 20 HP. The result is easier pip...
12
Cooling capacity: 30 kW (12/7 — 35°C)
Heating capacity: 29 kW (40/45 — 7°C)
Year of manufacture: 2017
Options: chiller/heat pump with external (missing) heat exchanger
Refrigerant circuit: 1 pc.
B8uwexqsyf
Compressors: 1 pc. SIAM (scroll, E348411 inverter)
Type of refrigerant: R410A
Weight: 266 kg
Dimensions: 1.30 x 0.70 x 1.60 m
1
Condensing Unit 2748 W
For minus cooling (-25°C)
Cooling capacity: 2748 W
Construction year 2015
Bwiaaae0js
Refrigerant: R404A
9
Catalog No. : 5648
Tg7gapxj
Type: XOTM 60
Producer: UNIT
Made in: 2004
Characteristic:
Minimum diameter of the pipe: 20 mm
Maximum diameter of the pipe: 60 mm
Machine length: 4900 mm
Machine weight: 130 kg
5
OPERATOR INTERFACE PANEL USED GOOD WORKING
Iei0zlz
PAY PAL
SENDING POST POLAND TO UE 30EURO
Satisfaction Guaranteed, sold with 14 days Warranty.
We accept paypal only
Discover more used machines
1
3HAC17396-1 ABB Serial measurement unit
Lgtqkzzj
5
UNIHOLZ modular hinge drilling unit
ECO STAR model
production year 2006
0.75 kw engine, 2800 RPM
maximum drill bit diameter 40 mm
3 spindles
CE marking
400V power supply
Fzzxdrx
base - table on wheels
3
Length: mm
height: mm
power consumption: A
voltage: 220 - 240V V
connected load: 215 kW
total power requirement: 0,215 kw
weight of the machine approx.: 16 kg
B7wpfi7hhq
dimensions of machine: 0,5 x 0,2 x 0,45 m
2
neu
ca. 8 Wochen ab Auftragse
Türkei
20200
377.74
0.4 - 4 mm
200 mm
200 x 3 mm
80 mm
100 m/Min
8 Nm
500 mm
Pixln
500 mm
500 mm
helical gear boxWATTDRIVE (Made in Austria)
FESTO pneumatic equipment
servo drive and control SIEMENS
7" colour touchscreen SIEMENS
4 gear rollers drive. Prevents the separation of the rollers during piloting operation for higher accuracy
Remote service module
EUCHNER hand wheel
BECAUSE THE APPLICATION AREAS ARE ALWAYS VERY SPECIFIC FOR EACH ...
6
Hydraulic power unit REXROTH
Year of manufacture approx. 1970
working pressure- nominal capacity: 50 bar
Na08xd
Operating pressure: max. 70 bar
volume flow: approx. 40 liters/min.
tank capacity: 240 liters
Engine power: 4 kW
Mains connection: 380 Volt, 50 Hz
- 1x electric hydraulic valve BOSCH
Space requirement Length: 1020 mm, Width: 610 mm Height: 1000 mm
Own weight: approx. 170 kg
4
offer consists of:
Qdrpn
- punch unit HP-200A
Horizon HP-200A
punch unit
- features: press- and punch
- numbers of holes: max. 4 holes; min. 2 holes
- punch hole position: max. 14mm; min. 9mm
- punch hole diameter: 6mm
- size:
max. 356x508mm;
min. 120x90mm
- punch thickness:
max. 4mm
- speed: max. 4000 Broschüren/h
- power: 230V / 50Hz - 0,68kW
- dimensions: 500x770x1035mm
- weight: 168kg
We can also organize the following for you:
packaging, loading, transport ( by ship or plane)...
6
- no description available -
Evleri73e
5
Switchgear, control, flame sensor, flame monitor, UV flame sensor, UV sensor, control device, burner control, automatic burner control
-Manufacturer: Landis & Gyr, burner control unit
-Type: LFE1
Brtvzmtud8
-Dimensions: 210/100/H1400 mm
-Weight: 1.8 kg
4
Length: mm
height: mm
power consumption: 40 - 500 A
welding current: V
total power requirement: 27,5 (kVA)
weight of the machine approx.: 120 kg
dimensions of machine: 1,0x0,53x1,5 m
Welding rectifier / inverter
MIG / MAG and electric welding
Supplied with transport rack
Type of current: direct current
TIG 10A / 10 V to 500A / 30V
E-welding: 12A / 20.5V to 500A / 40V
MIG / MAG: 40A / 12V to 500A/ 39V
Voltage U1: 380 - 415V
Qag3f
Cooling type F, water cooled
Protection class IP 23
2
material width 500 mm
material thickness - 4,0 mm
feed length 0,01 - 9999,99 mm
number of rolls 2
material cross-cut 1000 mm²
Power capacity 4,6 kW
Weight 0,5 t
Dimensions (WxDxH) 1,0 x 0,8 x 1,3 m
B2yioz2ox0
electronic roll feed
6
Electric screwdriver unit with automatic feed and pneumatic double stroke with touch screen operation
and screw feeding by vibration conveyor, sorting device, spiral conveyor, vibratory bowl for screwdriving technology
BÖLLHOFF Type Uniquick Vario + electric screwdriver unit REXROTH EC303 SZ3 + CS351S-G IL + PLC control Panasonic GT12 / FP0R
The system consists of the following components:
- Vibratory feeder BÖLLHOFF Uniquick Vario
- Electric screwdriver unit Böllhoff Uniquick Vario UVS-100-R-E ...
offer consists of:
Hohner stitching head
manual adjustment
Hwgvvc2eo
Connectable to the following machines:
- AC 1200-4800
- HAC
- MC
- AC 8000S/ 8300S
- MAC
- TAC
Technical Details:
- size: min. 148x115mm, max. 320x330mm
- thickness: min. 2 Blatt, max. 4mm
- cycles: max. 2350/h
- dimension: Breite 100cm, Tiefe 62cm, Höhe 85cm
- weight: 130kg
- power: 220-240V, 300W
We can also organize the following for you:
packaging, loading, transport ( by ship or plane) including customs
5
- no description available -
Bzjkw32j30
5
Hydraulic filter, filter element, high pressure filter
-Manufacturer: Parker, high pressure filter with contamination indicator
-Type: 0-24P-1-40W-M-1-2 filter unit with 2 filters
-Price/sale: only complete
2sx2eu
-Dimension: 500/250/H160 mm
-Weight: 20.8 kg
4
Length: mm
height: mm
power consumption: 350 A
welding current: V
total power requirement: 17,5 kVA
weight of the machine approx.: 55 kg
dimensions of machine: 0,64 x 0,31 x 0,46 m
Welding rectifier/inverter
B7wpemjwln
MIG/ MAG:40A / 14V up to 350A / 31,5 V
TIG: 10A / 10V up to 350 A
E-welding: 15A / 20,5V up to 350A / 34V
Voltage U1: 380 - 415V
Cooling type: F (water cooled)
Protection class: IP 23
6
Drilling unit, drill feed unit AIRTEC / SUGINO SELFEEDER / ROMAI
Bz2x2igz7u
Drill head with multi-spindle drill head, drill feed unit
Drilling unit, drill feed unit AIRTEC / SUGINO SELFEEDER
Type: D4P-1330G
Year of manufacture: 2001
drilling capacity D4P max.: Ø 13,5 mm
Drilling capacity 1330G: Ø 6 mm in steel at speed 3.000 rpm.
Spindle speed: 3000 rpm.
Stroke path: max. 100 mm
spindle receptacle: B16
Shank adaption at the drilling spindle sleeve, e.g. for multi-spindle drilling head: Ø 50 mm
O...
6
offer consist of:
GUK fold unit
FA 52/4 Stat 2 HT
- roller condition: 0%
- rollers refurbished: 1.536€
- 4 buckles
- installation: height manually adjustable
- usage: online and offline workable
2saelm
We can also organize the following for you:
packaging, loading, transport ( by ship or plane) including customs
5
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine
-HOMAG trimming unit for trimming the protruding edges on the front and rear edges
-with heavy leadership
Shnvkxjva
-Milling unit: swiveling
-1x engines Perske
-Motor type:
-Power: 0.75 kW
-Voltage: volts
-Frequency: 300 Hz
-Speed: 8,600...
6
Length: mm
height: mm
power consumption: A
welding current: V
total power requirement: 27,5 (kVA)
weight of the machine approx.: 120 kg
dimensions of machine: 1,0x0,53x1,5 m
Welding rectifier / inverter
MIG / MAG and electric welding
Supplied with transport rack
Type of current: direct current
TIG 10A / 10 V to 500A / 30V
Heh2xey9w
E-welding: 12A / 20.5V to 500A / 40V
MIG / MAG: 40A / 12V to 500A/ 39V
Voltage U1: 380 - 415V
Cooling type F, water cooled
Protection class IP 23
6
Drilling unit, drill feed unit AIRTEC / SUGINO SELFEEDER
Type: D4P-1330G
Year of manufacture: 2001
drilling capacity D4P max.: Ø 13,5 mm
Drilling capacity 1330G: Ø 6 mm in steel at speed 3.000 rpm.
Spindle speed: 3000 rpm.
Stroke path: max. 100 mm
spindle receptacle: B16
Shank adaption at the drilling spindle sleeve, e.g. for multi-spindle drilling head: Ø 50 mm
Outside diameter of the clamping shank: Ø 92 mm
motor speed: 2855 rpm
Motor power: 0,75 kW
Mains connection: 400 Volt, 50 Hz.
- Drillin...
1
offer consists of:
Horizon Stitching unit SP-1
Hohner stitching head
manual adjustment
- without stitching head
Technical Details:
- size: min. 148x115mm, max. 320x330mm
- thickness: min. 2 Blatt, max. 4mm
Owq0z
- cycles: max. 2350/h
- dimension: Breite 100cm, Tiefe 62cm, Höhe 85cm
- weight: 130kg
- power: 220-240V, 300W
We can also organize the following for you:
packaging, loading, transport ( by ship or plane) including customs
5
Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame
-Transfer in current condition as seen
-1x: punching bracket as shown in the pictures
-Manufacturer: CEWE
-1x: type LWS 35-150
Mnbnz
-Dimensions: 300/80/H220 mm
-Weight: 13 kg
4
Length: mm
height: mm
power consumption: 40-500 A
welding current: V
total power requirement: 27,5 (kVA)
weight of the machine approx.: 93 kg
dimensions of machine: 0,75 x 0,4 x 0,6 m
Bhw9esii
Welding rectifier / inverter
MIG / MAG and electric welding
Supplied with transport rack
Type of current: direct current
TIG 10A / 10 V to 500A / 30V
E-welding: 12A / 20.5V to 500A / 40V
MIG / MAG: 40A / 12V to 500A/ 39V
Voltage U1: 380 - 415V
Cooling type F, water cooled
Protection class IP 23
5
Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine
-HOMAG unit carrier for milling units
-with heavy leadership
-laterally movable
-with counter
-Table height: 285 mm
-Table surface: 1210 x 295 mm
-Table thickness: 18 mm
Sfonowluz
-Dimens...
4
Length: mm
height: mm
power consumption: 350 A
total power requirement: 17,5 kVA
weight of the machine approx.: 60 kg
dimensions of machine: 0,64 x 0,31 x 0,46 m
dimensions:: Wagen: L:1,0 x B: 0,5 x H: 0,2 m
Welding rectifier/inverter with trolley
MIG/ MAG:40A / 14V up to 350A / 31,5 V
Qag2h
TIG: 10A / 10V up to 350 A
E-welding: 15A / 20,5V up to 350A / 34V
Voltage U1: 380 - 415V
Cooling type: F (water cooled)
Protection class: IP 23
5
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine
-HOMAG trimming unit for trimming the protruding edges on the front and rear edges
-with heavy leadership
Loirr
-Milling unit: swiveling
-1x engines Perske
-Motor type:
-Power: 0.75 kW
-Voltage: volts
-Frequency: 300 Hz
-Speed: 8,600 rpm...
2
Length: mm
height: mm
power consumption: 40-500 A
welding current: V
B7wpohaqao
total power requirement: 27,5 (kVA)
weight of the machine approx.: 120 kg
dimensions of machine: 1,0x0,53x1,5 m
Welding rectifier / inverter
MIG / MAG and electric welding
Supplied with transport rack
Type of current: direct current
TIG 10A / 10 V to 500A / 30V
E-welding: 12A / 20.5V to 500A / 40V
MIG / MAG: 40A / 12V to 500A/ 39V
Voltage U1: 380 - 415V
Cooling type F, water cooled
Protection class IP 23
5
Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine
-HOMAG trimming unit for trimming the protruding edges on the front and rear edges
S0xbjp2us
-with heavy leadership
-Milling unit: swiveling
-2x motors
-Motor type:
-Power: 0.23 kW
-Voltage: volts
-Frequency: Hz
-Speed: 18,000 rpm
-Other engines...
2
Length: mm
height: mm
power consumption: A
welding current: 200 V
Yqweypt9
total power requirement: kw
weight of the machine approx.: 40 kg
dimensions of machine: 0,8 x 0,4 x 0,8 m
Welding rectifier
MIG-MAG 30A / 15V to 200A / 24V
Voltage U1: 230/400V
Protection class IP 21
Cooling: air cooled
Equipment:
Welding gun with connection cable
Ground cable
5
Control device for electric forklift, electric motor, DC motor, traction motor, drive motor, motor control, motor controller, control, drive control
-Manufacturer: Jungheinrich, travel control
-Type: Mikropuls 1505 F
Btmskcxzet
-Dimensions: 210/170/H90 mm
-Weight: 2.1 kg
2
cooling capacity: kW
drive power: kW
voltage: V
Number of ventilators: 2 St.
max. temperature: zul. 320 Grad
pressure: zul. 10 bar
total power requirement: kw
weight of the machine ca.: auf Anfrage t
dimensions L x W x H: 2,9 x 1,9 x 2,3 m
mechanical filters
ventilator size Ø 800mm
Dqc7mqsd
flange connection Ø 220mm
equipped with security valve.
external commissioning.
5
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine
-HOMAG trimming unit for trimming the protruding edges on the front and rear edges
-with heavy leadership
-Milling unit: swiveling
-2x motors
-Motor type:
Lqmcp
-Power: 0.23 kW
-Voltage: volts
-Frequency: Hz
-Speed: 18,000 rpm
-Other en...
5
welding current: 400 A
power consumption: 25 kVA
current: bei 100% max.400 A
weight of the machine approx.: 302 kg
dimension machine xH: 1,2x0,6x1,2 m
Welding Rectifier
MIG MAG
- water-cooled, cooling type AF, protection type IP 22
- direct current
Equipment:
S8u2jl38x
- with feed unit Kjellberg DTV 500
- without hose package, without pressure regulator, without ground cable, new
Device has been tested.
5
High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay,
Qcqosqqn
Control box, burner control
-Manufacturer: Landis & Staefa, automatic burner control unit
-Type: LMG22.130A27
-Dimensions: 90/60/H60 mm
-Weight: 0.2 kg
3
Length: mm
height: mm
power consumption: A
capacity at 100% ED: 400 A
capacity: 60% ED = 500 A
welding current: Gleichstrom V
weight of the machine approx.: 230 kg
dimensions of machine: m
capacity: 21 kVA
Pbcff
Welding rectifier
MIG / MAG
Cooling type F
Protection class IP 23
insulation class F
incl. wire feed device, feed rate 0,5 - 20 m/min
Ground cable/pliers
Hose package 4 meters new