Used Cone for sale (1,194)

Condition: good (used), V-belt pulley, pulley -for compressor with blades -Diameter: 620mm -Strap: 2 -V-belt width: 13 mm Ledpfodf Hh Ejx Aanoak -Receptacle cone: 17/25 mm long -Weight: 18kg -only one piece available

Condition: used, functionality: fully functional, mileage: 17,500 km, Year of construction: 2000, Only available for pickup at the end of March 2026 Current mileage: approx. 17,500 kilometers (as of 17/12/2025) Firefighting Vehicle TSF (Portable Pump Firefighting Vehicle) 1. Vehicle Classification • Vehicle type: Firefighting vehicle TSF (Tragkraftspritzenfahrzeug) • Applicable standard: DIN 14530 T 16 2. Manufacturer and Chassis • Body builder: IVECO Brandschutztechnik Görlitz GmbH (Magirus) • Chassis manufacturer: Volkswagen • Chassis type: LT 35 3. Identification and Production Data • Year of manufacture: 2000 • Serial number: 0887 • Internal call sign: 80/59/1 4. Previous Usage • Previously operated by the Goodyear Fulda plant fire department ("Werkfeuerwehr Goodyear Fulda") 5. Drivetrain • Transmission: Manual gearbox 6. Equipment Configuration (as installed) 6.1 Equipment Compartment G1 (Driver’s Side) • Holmatro hydraulic rescue equipment, consisting of: Lajdpfxox Irwqj Aanok – Hydraulic power unit – Hydraulic spreader – Hydraulic cutter • Traffic cones • Medical backpack 6.2 Equipment Compartment G2 (Passenger Side) • Chainsaw (Stihl) • Breathing apparatus holders (Dräger) • Toolboxes • Chemical absorbent materials 6.3 Equipment Compartment GR (Rear) • Slide-out shelf for portable fire pump (TS) • Hose reel • Spine board • Stretcher

Condition: used, machine/vehicle number: XLRAE55GF0L34xxxx, mileage: 1,31,911 km, Year of construction: 2008, Please contact ATS Norway for more information Please provide reference number upon request: 22095 Specifications: 2008 model Mileage: 131,911 286 hp Automatic transmission Euro 4 Tires (see pictures) Approved for transporting horses for 8 hours Space for 5 horses Honda Em4500cxs generator (it has not been used by the owner, uncertain condition) Battery pack 6 sleeping places 4 belt places The kitchen Refrigerator Cooktop Television Bath toilet Wash Radio Light Country road Videos Ready for delivery Description: We have a 2008 Daf Fa 55 4x2 horse trailer with space for 5 horses, see video, for sale. The car is EU approved and functions as it should according to the owner. The car has always been stored under cover after use. There has been a small leak in the rear roof hatch. The owner has repaired this with silicone around the hatch. But not sure if it will hold tight. Since it has not been used since. Errors and omissions may occur and some cost may be expected. Ready for delivery Km: 131911 HK: 285 Technical approved: Yes EU-approved until: 31.10.2026 Own weight: 9700 Ljdpsx Ndnwofx Aanoak Euro: 4 Model: Fa 55 4x2 hestebil m/ plass til 5 hester se video Gearbox: Automatic

Condition: used, Year of construction: 2019, x-travel 3.400 mm y-travel 3.400 mm z-travel 1.600 mm Control CELOS 840D sl Op Siemens max. spindle speed 20 - 15.000 min/-1 power capacity - main spindel 52 / 42 kW tool taper HSK-A100 max. Torque 404 / 280 Nm swivellable B: -30° / +180 ° table diameter 2.500 x 2.000 mm max. table load 10.000 kg table speed 5 min/-1 distance spindle center to table hor.: 130 - 1.730 mm distance spindle center to table vert.: 230 - 1.830 mm distance spindle nose and table hor.: -1.500 - 1.900 mm distance spindle nose and table vert.: -1.600 - 1.800 mm type 5x Rad- / Wheel number of toolpositions 303 pos. max. tool diameter 110 mm max. tool-dia with free toolbox 280 mm max. tool length 900 mm max. tool weight 45 kg tool changing time 7,5 sec tool taper HSK-A100 rapid traverse 60 / 30 / 40 m/min total power requirement 140 kVA weight of the machine ca. 106 t dimensions of the machine ca. 14,0 x 13,0 x 7,0 m 5-Axis-CNC-Heavy-Duty-Machiningcenter Universal DMG MORI - DMC 340 U - Accuracy package - MDynamics package (Improved surface finish with reduced machining time) - Only approx. 10,500 spindle hours - Cone cleaning station with rotating brushes - Balluff tool identification Lasdpfx Aajx H Tt Donek - Machine protection via rapid shutdown (MPC) - Laminated safety glass - Machine design for pit installation - Heidenhain linear scales (instead of Magnescale) - Camera remote system with screen on the control panel

Condition: used, functionality: fully functional, Twistlocks are a proven locking and stabilization system, standardly used on sea containers to ensure longitudinal and rotational security when stacking, transporting, and handling containers. The system securely connects containers to each other or to vessel decks, shiplift platforms, and stationary mounting points, thereby minimizing the risks of shifting, tipping, or damage. Bridge fittings are specially designed connectors used in container logistics to create stable, reliable bridge connections between containers, brackets, and subframes. They provide secure linking of components within multimodal transport systems, reduce tolerances, and minimize the risk of displacement or instability during transport, storage, and loading operations. Stacking cones are specially engineered conical connectors that provide increased stability and safety when stacking, handling, and transporting containers. They enable precise positioning of containers on stacking systems, mounting brackets, and subframes, reducing play between units and minimizing the risk of shifting or damage during multimodal transport chains. Delivery, further details, and accurate pricing available upon request! We look forward to your inquiry and are pleased to offer you personal advice! Lodpfx Aaex H Rv Nsnoak MAGITU GmbH

Condition: used, Automatic machine for lipstick filling Manufacturer: Cosmatic (IT) Lsdpex Db N Eefx Aanjak Model: SM43 Slim Working output up to 2000 pcs/h Device works in silicone mold technology (Long rubbers). Possibility of producing slim lipsticks with an oriented stick. Air cooled. Machine has two refrigeration compressors working alternately. Silicone mold heating by hot air blower (inside) and electrical lamp (outside). Additional heating to prevent the formation of a cone inside the lipstick. Automatic insertion of the stick into the packaging. Automatic screwing station. Manual package loading. Manual capping. Machine equipped with 2 filling heads and melting/dosing pumps. Machine fully functional and still in use. Regularly serviced. New 2016.

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate Ljdpfxsd It Ifs Aansak -Mouth size: Ø 250 mm -Short cones: 11 -Recess: Ø 199 mm -Weight: 36.5 kg

Year of construction: 2007, condition: ready for operation (used), Control Unit Brand SIEMENS Model SIEMENS 840D Additional Equipment Siemens Path Control SINUMERIK 840 D, featuring 5 axes, 1 spindle, electronic gear, and integrated safety functions Motorized Milling Heads for internal and external gears with a swivel range of degrees External Gears: Min. Diameter: 950 mm / Max. Diameter: 2800 mm Cutter Arbor Cone: HSK-B160 (Hollow Shank Taper According to DIN 69063) Lasdpjx D E Skefx Aanjk This 5-axis CNC milling machine manufactured in 2007 features a Siemens SINUMERIK 840 D controller with electronic gear and integrated safety functions. It can handle workpieces up to 2800 mm in diameter and offers motorized milling heads with a swivel range of / degrees. Ideal for both internal and external gears, consider the opportunity to buy this Gleason Pfauter P 2800 CNC milling machine. Contact us for more information about this machine. Application Types Other Machine Tools

Condition: used, Year of construction: 2016, The Mazak VTC 800 series is a line of powerful, large-format 5-axis turning centers for large workpieces, known for their high precision and rigidity, ideal for aerospace, energy and heavy machinery, with functions such as integrated spindles, fast tool change, and for efficient complete processing. Accessories/Options: Tool magazine for 30 tools Tool length measurement, tool breakage detection Factory-installed preparation for chip conveyor (left) Magazine (HSK) for 155 tools Air blower at the workpiece Signal light (end of machining: yellow) Additional: Work area lighting Coolant gun Air blower through the spindle 70 bar preparation, including interface for high-pressure system Automatic opening/closing of the operator door Mazak Monitoring System B RMP 60 (only/H/V) Collision monitoring by Brankamp 2 Renishaw TS27R tool presetting devices NC rotary table Holding device for vertical use of the NC rotary table Table center partition for pendulum machining 3D model of the work area in STEP format 5-axis milling technology Knoll compact filter KF400/2300 (filtration capacity 400 l/min, tank volume 2300 l/min) 1) High-pressure cooling 70 bar, 7 pressure stages Chip conveyor, hinged belt design Additional M-codes: 1 set = 2 M-codes Preparation for dual extraction system (mechanical nozzle) 0.198 mm Transformer for the European market 1 set of manuals in electronic form on CD 1 set of adjustment tools Foundation set (anchor bolts + plates) MAZAK standard paint Work area lighting Additional items: AirFresh FMN V12 extraction system (installed on both sides and coupled with a door sensor) Holding device for vertical operation of the rotary table 2 x Renishaw TS27R integrated tool presetting devices Spare parts: Y-axis motor, tool magazine Linear axis shifter motor Rotary axis shifter motor Cylinder for swivel unit width: 3500 mm length: 820 mm Laodpjx Idwisfx Aanok X-axis travel range: 3000 mm Y-axis travel range: 800 mm Traversal range Z-axis: 720 mm min. distance spindle nose to table top: 140 mm max. distance from spindle nose to table top: 860 mm max. table load: 2500 kgf B-axis: ± 110 degrees Working spindle steep taper mount: Steep taper 40 collapses under load 155 tools HSK Max speed: 18,000 RPM Min. Drehzahl: 35 min-1 Rated power: ( 100 % continuous operation) 33,0 kW Emergency travel speed X-Y & Z axis: 50 m/min Working table width: 3500 mm Worktable length: 820 mm Width of T-slots: 18 mm Number of T-slots: 7 Distance of T-slots: 100 mm Table height from the floor: 870 mm Tool changer number of tool places (Standard): 30 Number of tool stations (optional): 48 Tool selection method: shortest path tool shank: Steep cone 40 With occupied side positions: 80 mm With available spaces: 130 mm max. tool weight: 8kgf Total weight of all magazine tools: 150 kgf max. tool length: 350 mm Tool change time: (Span-to-Span) 4.7 s Connected load: 400 V / 50/60 Hz Air pressure: 5 – 9 bar Air volume: 260 l/min Tank capacity: 500 l Dimensions (Height x Length x Width): 3376 x 5480 x 4051 mm Weight approx: 16300 kg colour: Gray / Black

Condition: used, Year of construction: 2007, max. wheel diameter 500 mm Hypoid adjustment ±70 mm axial cross angle 90 ° Distance Y- 150 - 350 mm Distance Z-axis 120 - 340 mm turning speed range - stepless 0 - 5000 U/min max. torque on the spindle 57 Nm Cone 99,2 mm Pull-in force Tool clamping 23000 N Braking torque max. 93 Nm total connected load 20 kVA total power requirement 15 kW Ljdpfxoukitxj Aanoak weight of the machine ca. 6 t dimensions of the machine ca. 2,35 x 2,24 x 2,5 m

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Lodpfsx Hn A Tex Aaneak Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation

Condition: new, Year of construction: 2025, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Ledpfx Aox Dhl Hoanoak Fabo tracked impact crusher FTI-130s is a complete mobile system which moves on hydraulicly driven tracked system with 1 km/h speed and combination of a vibrated grizzly feeder, an Impact crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationality of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines can not reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: Model: FTI-130s Production Capacity: 400-450 tons per hour Maximum Feeding: 500 mm Crusher Type: Impact Crusher SIZE: 1270x1200 mm CSS Setting: 0-50 mm Total Power: 500 kva Vibrating Screen: 1500x4200 mm Weight: 63 tons - Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Röhm, rotating centering point centering cone -Type: Size 173 Ljdpovx Rhqefx Aaneak -Recording: MK4 -Dimensions: Ø 120 x 190 mm -Weight: 3.9 kg

Condition: used, Year of construction: 1997, Description: Suitable for regrinding and manufacturing new wooden and metalworking tools of all kinds. Accessories: Software Package 1 (cylindrical tools sharp-edged, corner and full radius), Software Package 2 (conical-spiral tools sharp-edged, corner and full radius), Software Package 3 (drills and step drills), Software Package 4 (step tools) Software Package 6 (woodworking tools), Software Package 16 (warming-up program), Software Package 27 (free programming), Heli-Flute & Cone (flute calculation program for cylindrical and conical mills), stepless speed control, pneumatic workpiece clamping, Probe, automatic fire protection system, electrostatic extraction, oil collection tray, automatic central lubrication, 2 grinding wheel mounts. X axis longitudinal movement: 400 mm Y - axis vertical movement: 250 mm Z-axis cross movement: 580 mm C-axis rotary table: Swivel range +/- 200 ° Workpiece holder: ISO 50 max. workpiece length: 270 mm max. grinding wheel diameter: 200 mm, Max. Workpiece diameter: 260 mm Grinding spindle speed infinitely variable: 0 - 9500 rpm. weight: approx. 3200 kg Drive power grinding spindle: 10,0 kW Connected load: 15 kVA (400 V / 50 Hz) Lasdpjx H Nqlofx Aanjk Dimensions W x D x H: 2000 x 2010 x 2150 mm colour: grey RAL 7035/7043

Condition: used, Year of construction: 1997, max. wheel diameter 275 mm gear width 150 mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 r.p.m. Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 r.p.m. - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min - 13 milling cutters included - Lsdpfx Aed Il R Aoanjak

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck, face turning chuck Lodpfx Aodfv Iloanoak -Mouth size: Ø 460 mm -Cone mounting: Ø 100 mm -Threaded mounting (outer): 152 mm pitch 6G 1 3/8" 1 1/2" -Through hole: Ø 84 mm -Weight: 56 kg

Condition: used, Year of construction: 2007, workpiece diameter nominal 2400 mm max. workpiece diameter 2800 mm max. module 30 mm control Siemens Sinumerik 840 D dividing plate diameter 2200 mm table diameter 2500 mm Table hole Diameter / depth 800 / 875 mm max. table load 40000 kg Table rpm 4,5 min-1 clamping length max. 375 mm clamping diameter max. 350 mm cutter diameter max. 2800 mm Cutter arbor cone HSK-B160 swivelling range milling head + 30/-45° Distance Cutter - Workpiece 615 / 1600 mm weight of the machine ca. 57 t Slide drives: - Feed & rapid traverse speed: - axial 4000 mm/min - radial 3000 mm/min - tangential 3000 mm/min Equitment/Accessories: - IFK2 internal milling head - Milling arbor with spacers - chip conveyor - Oil mist extraction Laodpfx Aaew Rf S Sonek - technical Documentation

Condition: good (used), Rotary hub drive, center turning device -Outer diameter: 315 Laodeb A Nf Djpfx Aanek -Cone: Ø 105 mm -Bolt circle: Ø 135 mm -Weight: 20 kg

Condition: good (used), grinding stone, grinding pin -for internal grinding machine -1 Collet chuck -Cone mount: Ø 53 mm -Grinding pins: various diameters Lajdpfx Aob A Inqoanek -Outer diameter: 1-40 mm -Sale: only complete set -Weight: 6 kg

Condition: good (used), Countersink, cone countersink -Sizes: 2x20/2x30/3x45/4x60 mm -Countersink: 90° Lasdsb A Rccjpfx Aanjk Manufacturer: Bilz -Sale: only complete set -Weight: 5 kg

Condition: good (used), Centrifugal quick-release chuck, centrifugal chuck, three-jaw chuck -Outer diameter: 155 mm -Clamping range: Ø 12-30 mm -Cone mounting: Ø 82 mm -Bolt circle: Ø 105 mm -Quantity: 2x food available Price: per piece Lodpfx Aob A Rdteanoak -Weight: 6 kg/piece

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -Replaceable jaws: soft -Cone mounting: Ø 82 mm Lasdpfob A Rdqsx Aanjk -Bolt circle: Ø 105 mm -Weight: 14 kg

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 160 mm -exciting: centric -Replaceable jaws: soft Laodpsb A Rfcjfx Aanek -Cone mounting: Ø 105 mm -Bolt circle: Ø 135 mm -Weight: 18 kg

Condition: good (used), Centrifugal quick-release chuck, centrifugal three-jaw chuck -Outer diameter: 155 mm -Clamping range: Ø 25-45 mm -Cone mount: Ø 62 mm Lajdpfx Aaeb A Rdxenjk -Bolt circle: Ø 82 mm -Quantity: 2x food available Price: per piece -Weight: 6 kg/piece

Condition: good (used), Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 200 mm Ledsb A Ranjpfx Aaneak -Interchangeable jaws -Cone: 69 mm -Thread: M 95 x 4.5 mm -Weight: 26 kg