Used Contour Edge Banding Machine for sale (66,210)

Condition: excellent (used), Year of construction: 2017, I sell the fully equipped edge banding machine BRANDT KDF 230 AirTec, year 2017: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible / AirTec unit Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Gujdpfxoythxms Anxob Working thickness adjustment manually Material height 8-60mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 5070mm Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 0-200-24-6287, functionality: fully functional, input voltage: 400 V, input current: 56 A, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 78/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2001 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) Gedpfx Anoyv Da Hoxoub - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x4kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN21, with NC-axis positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: currently still in production Features and technical specifications: Edgebanding max. 8-55 mm Incl. swiveling control panel HF jointing unit with 2 motors Incl. quick-heating, exchangeable, Teflon-coated glue pot Incl. electronic positioning of pressure rollers Incl. tilting double end-trim saw unit Incl. flush milling unit Incl. application-controlled chamfer, radius, and corner copying unit with nesting package Incl. radius scraper with nesting package Incl. surface scraper Incl. grooving unit Incl. buffing unit Incl. spraying unit Availability: short-term Gedpfx Aow Nadgsnxjub Location: Flörsheim

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll Godpfx Anow I H Rkoxsub With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, type of input current: three-phase, plate height: 50 mm, From business closure Type: IMA Compact 309 C Year of manufacture: 1992 Gsdox Avcdspfx Anxjub For roll material and strips up to 9mm thickness - Gluing with hot-melt adhesive granulate - End trimming - Sawing - Flush milling - Scraper knives and buffing Payment in cash upon collection. Private sale – no warranty.

Condition: reconditioned (used), Year of construction: 2019, machine/vehicle number: 0-261-04-6440, functionality: fully functional, Feeding and removing of workpieces: • Pressure beam with rollers • Variable feed speed 8-14 m/min • Automatic grooving fence • Glue pot QA65 Edge banding: • Multifunctional profile scraping unit with R-2 and R-1 tools • Corner rounding unit with R-2 tool Guodpfx Anoykzdkexob Finishing of the workpiece: • Anti-adhesive and cleaning fluid • End trimming unit • Edge milling unit with R-2 and R-1 tools • Flat scraper, top-bottom polishing unit • Prepared for connection to a return system Documentation • Selected language: Polish • Documentation in machine control, in printed form General information • Year of production: 2019 • Machine length: 5573 mm • HOMAG control - POWER TOUCH • CE mark • Processed meters: 800,000

Condition: new, Year of construction: 2024, functionality: fully functional, power: 3.6 kW (4.89 HP), input voltage: 230 V, type of input current: AC, edge thickness (max.): 3 mm, height adjustment type: mechanical, overall weight: 11 kg, compressed air connection: 6 bar, working height: 65 mm, The perfect zero joint - for laser edgebands / hot-air edgebands / co-extruded edgebands - Up to 65 mm edge height - Up to 3 mm edge thickness - Mobile or stationary use - Tool-free changeover - Up to 3 mm edge thickness Godpjr H Ealofx Anxeub - approx. 4 min heating time - 230 V / 50 Hz

Condition: used, Year of construction: 2022, 0,4 - 5 mm Workingpiece thickness from to 10 - 45 mm Guedsxpn Ufepfx Anxsb Feed speed 8 m/min.

Condition: new, Year of construction: 2026, Machine includes: Pre-milling, pre-heating, pre-melting, pressing, fine trimming, end cutting, corner rounding, cutter scraping, flat scraping, buffing Heavy duty machine body and most mechanical machine parts are proceeded by advanced CNC machines for higher stability and longer service life without deforming; Merges numerous functions in one machine, including pre-milling, pre-heating, pre-melt gluing system, snipping, end trimming, fine trimming with servo, corner trimming, scraping with servo, Gjdpfx Anjxd Ubboxeub surface scraping and buffing, sprayers, edge banding work can be done in one process. Intelligent PC control, infeed fence, tape pressing rollers, fine trimming and scraping are servo adjust. Corner rounding pneumatic adjust. Machine Speed 16/20/24m/min; Nesting kit design, pre-drilled nesting hole friendly Fine trimming and Corner rounding by HSK25

Condition: used, Holz Her Sprint 1312 FÜ + PU Guedpfox Eilqjx Anxsb Heavy-duty design – edge thickness 0.4 - 12 mm PLC screen control Pre-milling unit for application before the gluing section Fully automatic edge magazine for roll and strip material Glue application station for cartridges + PU bonding automatic tracing nozzle Workpiece height 6-55 mm End trimming unit for roll and strip material up to 12 mm edge thickness with adjustment from 0-10° angle of the trimming saws Milling unit, flush milling up to 12 mm, radius milling – bevel milling - 15° motorised - 4 axes Scraper unit for bevels and radii with 2 pneumatically operated scraper holders pneumatic infeed and outfeed Flat scraper unit – finishing Spray device – PU Machine in TOP CONDITION Available from stock Lieboch

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 17E000332104800, functionality: fully functional, operating hours: 300 h, 1. AUTOMATIC EDGEBANDING MACHINE Model GTM 4/3 – GRIGGIO The automatic edgebanding machine model GTM 4/3, manufactured by the Italian company GRIGGIO, is a new model launched in 2017, replacing the previous GB 4/3 model. It features a modern concept designed for straight panel edgebanding with PVC and ABS materials. The machine is equipped with the following working units: a) Gluing unit for hot-melt adhesive, featuring rapid heating and a fully Teflon-coated tank for easy cleaning. b) Pressure unit for bonding the edging to the panel – equipped with three rollers: the first is a large-diameter driven roller, while the remaining two are idler rollers with opposing tapers. c) End trimming unit with high-frequency motors designed to trim the overhanging edging flush with the panel at both the front and rear ends at a 90º angle • Installed power: 0.38 kW • Blade speed: 12,000 rpm d) Top & bottom trimming unit with two independent high-frequency motors for removal of excess edging from the top and bottom of the panel • Motor power: 0.55 kW e) Scraper unit for optimal finishing of 2 mm PVC or ABS edge banding applied to the panel edge • Supplied with a pair of knives for use with 2 mm ABS edging f) Buffing unit • Two independent motors for cleaning/polishing the edge banding • Installed power: 0.19 kW • Equipped with 100 mm diameter brushes Maximum panel thickness: 45 mm Minimum panel width: 90 mm Minimum panel length: 200 mm Gsdjw Tkl Njpfx Anxsub Feed speed: 9.5 m/min Edgebanding overhang (top + bottom): 4 mm (2+2) Pneumatic system pressure: 6 bar Frequency inverter: 200 Hz for motors, enabling 12,000 rpm rotational speed General features: • The machine frame is constructed from a single-piece, high-rigidity steel sheet. • Panel feed system is of the caterpillar type, with skids covered with high-adhesion rubber. • The skids move on dual steel guides – one round and one flat, both hardened and ground, ensuring straight movement and resistance to lateral forces from the working groups. • Upper pressure unit made of aluminum, featuring rubber pressure wheels mounted on bearings, ensures improved linear piece movement. Included spare parts kit (in machine price): - 2 upper rubber pressure rollers - 1 rubber roller for end trimming unit - 2 cotton buffing discs - 5 rubber pads for feed conveyor track - 4 adhesive pot heating elements - 1 temperature probe EXW price: €10,000 (excluded VAT) Manufactured in EU Excellent condition No pre-milling unit Operating hours: 300 h

Condition: used, Hebrock K34 PLC control with 15" touchscreen Pre-milling unit for joining before the gluing part (3 mm) Glue pot with removable pot and glue outlet device Max. edge height 60 mm Cross-cutting unit Milling unit for flush/radii/bevel trimming Corner rounding unit for radii/bevels Multi-radius scraper (R1/R2) Nesting Surface scraper Release agent spray device Year of manufacture 2023, 52 operating hours Machine is in mint condition Guodpfx Aswtfvksnxob From carpentry liquidation / retirement from carpentry

Condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine, profile holder edge banding machine -Manufacturer: Homag, profile holder from edge banding machine BRANDT KM 35 -Individual components: see photos Guodpfxjgy T Nbs Anxeb -Dimensions: 665/540 / H375 mm -Weight: 30 kg

Condition: excellent (used), SCM contura in excellent condition Guodpfxet E T I Ns Anxjb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Gjdjv A E Iyopfx Anxoub Weight 8 kg Total power requirement 0,9 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1820x585x1450 mm Weight 500 kg Gsdpfjvz Hd Hsx Anxoub Total power requirement 4 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2650x640x1400 mm Weight 700 kg Gjdpfxovz E T Hj Anxjub Total power requirement 5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4200x1500x1500 mm Weight 1050 kg Godpfxsvz E Tms Anxjub Total power requirement 8 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3810x575x1520 mm Weight 1000 kg Godpfxevz E Scj Anxjub Total power requirement 8 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1050x830x1100 mm Weight 133 kg Godjvz E Hmopfx Anxoub Total power requirement 2,1 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3200x780x1500 mm Weight 800 kg Total power requirement 8 kw Gusdevz E Evjpfx Anxjb

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading - Use of PUR adhesives possible Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Gjdpfx Aewka Nyonxoub Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, PROFILATRICE COMAL PRD 12 Automatic edging machine for strip end processing. Used to prepare strip edges for subsequent roll forming. The machine is equipped with a set of rollers capable of performing cold roll forming of strips and sheets, which are continuously shaped until the desired profile or tube is achieved. The machine has seen very little use, is fully operational, and is in good overall condition. Godoxdr Swepfx Anxeub Manual and original documentation are available.

Condition: new, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" version - "eye-S" control panel - "Maestro active edge" human-machine interface (HMI) software - Fine milling and radius scraping unit, radius = 1 mm Gsdpfxswkf Iho Anxoub - Fine milling and radius scraping unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer on the infeed guide - "SAVENERGY" kit - Interior lighting of the booth and gluing area - Nesting rollers - Release agent spray unit "AAR" 1 - Sprayer for finishing the edge - Sprayer for delicate edges - "RT-V1" jointing unit - "EASY SIZE" device - "VC-VM" gluing unit - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - "K-2 Radius" trimming unit - Chamfering and Radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE kit with 3 automatic positions straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Flat scraper "RC-N" - Buffing unit "SP-V" Machine is new and still in original packaging. Promotional machine at a special price.

Condition: excellent (used), Year of construction: 2023, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, Holz-Her Edgebander LUMINA 1380 Multi PUR & EVA glue application (up to 60mm) + NIR unit / laser edging up to 45mm, as exchangeable station Jointing milling unit IntelliSet - tool correction fa.s.t. - Set-up on the fly iTronic - pressure & glue quantity control Fully motorized configuration of all units Multi-function milling units - 1.3mm radius (double) & 2mm (double) Spraying units and much more... The machine is currently being refurbished at the factory in Voitsberg, Austria. Delivery, installation, and commissioning can be arranged directly through us at additional cost. The machine is currently located in our distribution warehouse in Gratwein, Austria. In the event of discrepancies between the German and a foreign language version, only the German version is binding. Gusdpfxox E A Die Anxeb Our Terms and Conditions can be found on our website at holzher.de/de/agb.