Used Cooling Cell for sale (8,697)

Condition: good (used), Julabo Dsdpfxjry Uife Afpsun Type: FC 600 Technical data for FC 600 Dimensions (W × D × H) 36 x 54 x 49 cm Weight 48 kg Temperature values: Working temperature range -20 ... +80°C Temperature stability ±0.2°C Mains voltage 230V/50Hz 7 A Power values: Heating output 1.2 kW Cooling capacity 20°C 0.6 kW, 0°C 0.34 kW, -10°C 0.21 kW Refrigerant R134a Global warming potential 1430 Filling weight 290 g Pump capacity Flow rate 20 l/min Pump capacity Delivery pressure 0.5 bar Filling volume 6 to 8 l Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a LDS Cooling Fan. LDS Fan Maximum Speed: 2855 RPM. Power supply 415V 3PH 50Hz Dodpsn Arayofx Afpeun Type: V870 50Hz Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), CTS Type: TW -60/9 Temperature test cell water-cooled CTS temperature test cell type TW -60/9 T means: Temperature W means: Walk in -60 means: lower temperature -60°C 9 means: 9 m³ test chamber volume Technical design: Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity adjustment by electronic monitoring and control system, environmentally friendly refrigerant R23 / R404 A Control system: 32 bit controller LCD control panel Duodpevb E Uqefx Afpen Digital display of set and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Technical performance data: Temperature tests: Temperature range -60 °C to +100 °C Temperature deviation ± 0.1 to 0.5 K in time Average rate of temperature change with test material and with heat radiation measured in the supply air. Heating: 1.6 K/min from -40 °C to +85 °C Cooling: 1.6 K/min from +85°C to -40°C Test material 420 kg of solar cell modules with100% flow Heat radiation 3000 Watt permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 9 m³ External dimensions: Width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: Width approx. 1600 mm depth 2400 mm, height 2200 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power 48.9 kW Rated current: 74.9 A Protection class IP 54 Cooling water connections Cooling water supply/return R1 ¼"", internal thread Unpressurized condensate drain R1" internal thread Weight: approx. 5609 kg Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: TW -60/9 Temperature test cell water-cooled Dedpfx Afsvb Hanjpjun CTS temperature test cell type TW -60/9 T means: Temperature W means: Walk in -60 means: lower temperature -60°C 9 means: 9 m³ test chamber volume Technical design: Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity adjustment by electronic monitoring and control system, environmentally friendly refrigerant R23 / R404 A Control system: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Technical performance data: Temperature tests: Temperature range -60 °C to +100 °C Temperature deviation ± 0.1 to 0.5 K in time Average rate of temperature change with test material and with heat radiation measured in the supply air. Heating: 1.6 K/min from -40 °C to +85 °C Cooling: 1.6 K/min from +85°C to -40°C Test material 420 kg of solar cell modules with100% flow Heat radiation 3000 Watt permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 9 m³ External dimensions: Width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: Width approx. 1600 mm depth 2400 mm, height 2200 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power 48.9 kW Rated current: 74.9 A Protection class IP 54 Cooling water connections Cooling water supply/return R1 ¼"", internal thread Unpressurized condensate drain R1" internal thread Weight: approx. 5609 kg Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2019, condition: used, functionality: fully functional, Miltenyi Biotec Clinimacs Prodigy Automated Cell Processing System. Dimensions 73.5 cm × 40 cm × 48 cm (w × d × h) Weight approx. 70 kg Input voltage 100–240 V~ Power consumption 810 W Frequency 50/60 Hz Pump speed 2–400 mL/min Atmosphere control Gas mix unit for CO2, compressed air, and N2; min. pressure: 1 bar, max. pressure: 2.5 bar Temperature control +4 °C to +38 °C Centrifugation Max. 2,500 rpm (400×g) Microscope camera Max. magnification: 400-fold Monitor 10.1” TFT touchscreen MACS tube sealer For sealing CliniMACS Prodigy Tubing Sets PVC tubes Types of starting material Leukapheresis, bone marrow, cryopreserved PSCs Available cell processing steps Cell washing, density gradient centrifugation, cell activation, fluorescent antibody labeling of cells, cell depletion and / or enrichment via magnetic cell separation, viral transduction, cell expansion, expansion and differentiation of adherent cells, cell culture and medium exchange, formulation of final cell product Tubing Sets and accessories Dedicated CliniMACS Prodigy Tubing Sets and Accessories available IPC/QC Integrated IPC/QC sampling pouches allow sterile sample removal Manufacture and availability Manufactured in Germany and shipped worldwide. Dujdpfxottwx Dj Afpon Good working condition. Please check out our other listings as well.

Year of construction: 2016, condition: used, functionality: fully functional, Miltenyi Biotec CliniMACS Plus Magnetic cell separator 2016. The Miltenyi Biotec CliniMacs Plus Instrument P/N 44085 is a cell separation system designed for clinical-scale enrichment of target cells or depletion of unwanted cells from blood products. It automates cell separation in a sterile system, enabling the separation of target cells from unwanted cells and collecting the fractions in different bags. The system is widely applicable in regenerative medicine, adoptive immunotherapy, and graft engineering. It magnetically labels cells in the Cell Preparation Bag and separates them, providing high purity and excellent yield. With optimized protocols, the system combines reproducibility with ease of use. Specifications: Dimensions: 70cm x 60cm x 90cm (w x d x h) Weight: Approximately 35 kg Input Voltage: 100-240 V~ Power Consumption: 350 W Monitor: 10.1 TFT Touchscreen Types of Starting Material: Leukapheresis, bone marrow Processing Steps: Cell depletion and enrichment via magnetic cell separation Dodst E Hl Ijpfx Afpsun Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2022, - Year of manufacture: 2022 Cooling capacity: - from 30 °C to 25 °C = 29 kW - from 15 °C to 0 °C = 15.4 kW - Connected load: 8.8 kW, 15.6 A - Dimensions: 1.05 m x 1.05 m x 1.75 m (L x W x H) Dujdpfx Aew S T Scefpen - Machine in very good condition - Very few operating hours!

Condition: used, Year of construction: 2011, input voltage: 400 V, input current: 32 A, type of input current: three-phase, Equipment: documentation/manual, We are offering this used robotic welding cell with 2 manual turntables, year of manufacture 2011. 1x KUKA welding robot KR 16L6 with two HDP200 manual turntables. The system is installed but no longer in use. Sale from site as seen. Type: RWS 1100 / 2×HDW Serial number: 09.09.594.000.000 Year of manufacture: 03/2011 Power rating: 36.8 kVA Nominal voltage: 3×400 V Dedpfx Aex Tab Iofpjun Nominal current: 32 A Frequency: 50 Hz If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine, cooling unit, cooling unit -Manufacturer: Fronius, Cooling unit for Frowig 260 AC/DC TIG welding machine -Type: FK 31 -Flow rate: max. 6.5 l/min -Dimensions: 250/210/H650 mm -Weight: 19 kg Duedpslp Uzbsfx Afpon

Condition: defective spare-parts repository (used), Year of construction: 2011, laser power: 6,000 W, Mains connection: 400 V Connected load: 114 kVA Control voltage: 24 V Fuse protection: 200 A Duedsx Ey Ewjpfx Afpen Compressed air connection: 6 - 14 bar

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OKUMA V-Turn LVT 400 CNC Vertical Turning Lathe (2 machine cell) Model: LVT 400 Control: OKUMA OSP 1000L Year: 2006 12 – tool turrets Hi – Power 60 Bar High Pressure coolant Swarf Conveyor Work Measurement Carousel System linking with both machines with turnover station Dodpfxsxwy S Ee Afpoun

Condition: good (used), Switch cabinet cooling unit, switch cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling unit, switch cabinet cooler -Manufacturer: Sim, heat exchanger control cabinet cooling unit -Type: 4299 -Voltage: 230V -Cooling capacity: 1,350 W Dodpew S Ecgsfx Afpsun -Dimensions: 400/245/H1000 mm -Weight: 54 kg

Condition: ready for operation (used), Trumpf 90-12-06-A4 / 1540720 rotary axis SN: 00001 for Trumpf TruLaser Cell 3004 – without motor, used, in good condition, 100% functional, scope of delivery as per photos. Dodpjx Eu U Hefx Afpeun

Year of construction: 2024, condition: ready for operation (used), functionality: fully functional, The cooling coil is for sale, the price is for one !!! Outside : 115 mm Inside: 90 mm Height : 165 mm Dujdpfx Asuru Idofpen DM 10 mm , tube

Condition: excellent (used), Inject Star massaging tumbler 2600 litres with cooling, complete with aggregate and vacuum pump. Duodpox I Sxnofx Afpjn

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Belt width 400 mm Djded Ert Sjpfx Afpsun External diameter 2.250 mm Length conveyor belt 48 m Equipment • drying tower downward • infeed left at the top

Condition: used, Frame size: 4100 x 2520 mm Cabin size: 3000 x 2520 x 2500 mm high + chimney: 600 mm Dsdoxctwlopfx Afpsun

Condition: used, Frame size: 4100 x 2520 mm Djdpfexct Anex Afpeun Cabin size: 3000 x 2520 x 2500 mm high + chimney: 600 mm

Condition: good (used), dimensions: 4200x2750mm height: 2400mm Duodpshtzgpefx Afpon

Condition: good (used), Dimensions: 5500x2750mm Height: 2400mm Duedpfx Afohtzgdspen

Year of construction: 2015, condition: used, Damage: none Dusdow Igp Hjpfx Afpjn

Condition: used, Air condenser from an ammonia refrigeration system with a maximum output of 180 kW. Additional title: radiator Performance per fan: 2 kw Position: to be installed outdoors on site Base construction: Housing with fans and coolers Features: 3 fans, Alpine main switch Dujdpfx Aoxzqtuefpon

Condition: excellent (used), Year of construction: 2015, Lahntechnik KES 04F1-01 Slide-in Chiller Manufacturer: Lahntechnik Designation: 154688 Type: KES 04 F1-01 Rated Voltage: 400 V Rated Current: 9.68 A Rated Power: 4.55 kW Control Voltage: 24 V DC Protection Class: IP 54 Rated Cooling Capacity: 4.0 kW Refrigerant: R134a Max. Operating Pressure of Refrigeration Circuit: 25 bar Weight: 100 kg Year of Manufacture: 2015 Grundfoss CM5-3 A Multistage Centrifugal Pump Danfoss MTZ28 JE4AVE Compressor Swep B10THx20/1P-SC-M Plate Heat Exchanger Further items - new and used - can be found in our shop! International shipping costs on request! Dusdpfxsx Rp Rto Afpen

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 64,000 h, machine/vehicle number: 20306061, working width: 3,110 mm, stroke length: 200 mm, throat depth: 415 mm, distance between stands: 2,700 mm, pressing force: 100 t, Amada Astro II 100 NT bending cell. Includes loading robot, bending robot, repositioning device with extra support, loading table, conveyor for unloading pallets (currently disconnected), safety fence. Comes with multiple loading and bending grippers, both clamp and vacuum type. Worksheet loading both as stack or vertical loading unit. Bending force: 980kN Table length: 3110 mm Stroke: 200 mm Open height: 500 mm Dodpfx Aewakicsfpjun Worksheet thickness min: 0.6 mm Worksheet dimensions min: 150 x 150 mm Worksheet dimensions max: 800 x 1000 mm/ 300 x 1800 mm Worksheet mass max: 20 kg (including bending robot gripper/ loading robot gripper) Serviced by local Amada representative.

Condition: good (used), Large throughput cooling spiral. 28 tiers, 880mm belt. Approx 550m belt. Duodpfsx Hbhcjx Afpjn