Used Cooling for sale (7,251)

Condition: excellent (used), functionality: fully functional, type of input current: AC, power: 47.7 kW (64.85 HP), input current: 80 A, GWK Compact Chiller, Industrial Cooling and Heating Unit, weco 48.1 wzttx + twd 3, weco e z 3x10 w m25 pt 5 x x c x General Information: Compact industrial cooling and temperature control unit for regulating process media. Designed for high-temperature process cooling and temperature control applications. Technical Data: Operating voltage: 400/460V AC ±10 % Rated current: 80A Maximum pre-fuse: 160A Frequency: 50/60Hz Control voltage: 24/230V Electrical connected load: 47.7kW Wiring diagram number: 489948 Rated cooling capacity: 10/13kW Maximum operating temperature: 90°C Refrigerant: R449A Maximum filling weight: 13.6kg CO₂ equivalent: 19.07t Global Warming Potential: 1397 Max. operating overpressure Psh: 23bar Max. operating overpressure Psl: 10bar Compressor displacement: 102/121m3/h Compressor speed: 1450/1750rpm Compressor final pressure: 29.5bar Njdex Apxfepfx Aqvjlb Important Note: Contains fluorinated greenhouse gases covered by the Kyoto Protocol!

Year of construction: 2001, condition: good (used), Mycom cooling compressor. Type : N8WB. Serial number : 83 13 12. Prod. Year : 2001. Riefrigerent : NH3. 110 KW. Performance : 171KW -32/-10. Performance : 316KW -10/+35. Nlodpfxjgfnpde Aqvsb

Condition: good (used), Heraeus Minifuge RF Analogue temperature setting: -40 to 30°C Speed 0 to 6000 rpm, analogue adjustable Timer 0 to 60 min or continuous Rotor Sepatech 3360 for 4 inserts, max. speed 6000 rpm Brake function Automatic unbalance cut-off Njdpfehty D Rox Aqvslb Automatic lid lock during use Dimensions: approx. 68 x 67 x 56 cm (W x H x D) Weight: 70 kg Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: excellent (used), Liebert Emerson M31UA cooling system Perimeter cooling for data center environments Cooling capacity: 31 kW Air distribution: Downflow Version: air-cooled Pattern picture, pictures follow. Nlsdpjd Ipgkefx Aqvsb Datasheet under this link Item condition: used More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: new, ME-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from +45 ºC and above. EU-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from -30 ºC to +40 ºC. Rust is the adversary of freshly blasted steel; high air humidity combined with low steel temperatures creates ideal circumstances for moisture condensation onto the recently blasted surface. Condensation rust is a major cause of early coating failure. By lowering relative humidity, the Proton dehumidifiers are designed to give the best climatic conditions for blasting. Climate conditions across the world vary considerably from chilly and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various types of technology can be employed in the dehumidification process; certain dehumidification technologies are more successful than others in dealing with specific climatic conditions. Each Proton dehumidifier is built to the highest quality standards and comes with regional certification. The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour. The rotor is not affected by over saturation. Therefore, the PROTON dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity. The PROTON dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions: •Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air. •Avaliable in pre-cooled and after-cooled versions for warm climates. •Robust design with steelframe, eyebolts etc. •Vital parts can easily be maintained and exchanged. •Large air inlet grills and filters. •Can be built into containers for protection. •Adjustable dehumidifying capacity and outlet air temperature in 4Grades. Njdpfx Aokw Ukueqvslb •Outdoor and indoor use. •Dry air pressure up to 1200 Pa. Technical. Spec.: Dehumidifiers differs between 1.000m3/h - 18.000m3/h.PROTON Dehumidifiers decrease the Relative Humidity (RH) from 90% to %10-15. Dehumidifiers are capable to remove 100lt water per hour.

Condition: like new (used), Year of construction: 2012, The refrigeration unit is in new condition with storage marks. Weight: 400 kg Height: 205 cm Nsdpfx Aqemmdq Tevjlb Width: 130 cm Depth: 65 cm

Condition: used, Year of construction: 2001, cooling device YORK YCSA 08 M+T, aircooled, 8 kW cooling power (7°C / 30°C), year: 2001 - 0 hours, price: 2.950 €, contact: Herr Rainer Eckerle Nlodpfxowkqxj Aqvjb

Condition: good (used), Year of construction: 2013, Cooling machine IKS IPE 121 air-cooled 47 kW cooling capacity pump and tank Year 2013 Price: € 10,400 Nlsdpfeg N I Nlex Aqveb contact person: Mr. Rainer Eckerle

Condition: good (used), Year of construction: 2011, cool machine Hitema ESE 003 air-cooled 4 KW cooling capacity pump and tank Nledeh N Sndopfx Aqvjb year: 2011 price: 2.950 € contact: Mr. Rainer Eckerle

Condition: good (used), Year of construction: 2017, Cooling machine Engie SPF 204 DL water-cooled cooling unit in combination with dry cooler or cooling tower 209 KW cooling capacity Nljdpog T H Hrsfx Aqvjb year: 12/2017 price: € 14.500 contact person: Mr. Rainer Eckerle

Condition: good (used), Year of construction: 2007, cool machine GWK Weco 48 AZX 48 KW, Cooling capacity pump and tank, year: 2007, price: 8.500 €, contact: Mr. Rainer Eckerle Nedsd H Rd Iepfx Aqvslb

Condition: not inspected (used), Year of construction: 1999, GRAM Cooling compressor. Maximum working pressure - 25bar. Working temperature, Max - 100grader. Working temperature, Min -10grader. Medium - REFRIG Scope - B. Capacity - 7 Liter SCHORCH electric motor. Type - KN7250M-AB01B-Z. 110kW. Nlodpfx Aqohg Tpaevob

Condition: used, Van Der Heijden cooling device Temperature range: 16°C - 22°C Operating time: 250 hours Cooling: 192 hours Compressor: 194 hours Pump 1: 194 hours Pump 2: 61 hours You are welcome to come by for a viewing. We are happy to organize a cost-effective shipping company for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Nljdpovv Si Djfx Aqvsb Visit our shop and take a look at our other offers. The company names and trademarks given are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article can occur and are reserved.

Condition: excellent (used), functionality: fully functional, Equipment: compressor, Manufacturer: ETSCHEID Njdpjxb D Hujfx Aqvjlb Capacity: 1500 l Equipped with agitator With integrated cleaning unit (CIP) Including cooling unit Condition: very good

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: RAD 864/900 - AB49038, cooling capacity: 1,113 kW (1,513.26 HP), type of input current: three-phase, type of cooling: water, overall weight: 8,449 kg, input voltage: 400 V, pressure: 6 bar, temperature: 21 °C, volume flow: 192 m³/h, pump pressure: 3.27 bar, total width: 2,124 mm, total length: 6,600 mm, total height: 3,180 mm, warranty duration: 12 months, input frequency: 50 Hz, Equipment: type plate available, Process Cooling Tower, air-cooled Type: Cooling Tower RAD 864/900 Cooling Tower, MTA S.p.A. - Rehsler RAD units are complete compact water cooling towers suitable for outdoor installation. Includes pump, water treatment system for biocide and stabilizer, and control and switch cabinet. Cooling capacity kW: 1113 Chilled water temperature outlet/inlet °C: 27 / 32 Flow rate m³/h: 192 Available pump pressure Bar: 3.27 Wet bulb temperature °C: 21 Air flow rate m³/h: 97,200 Sound pressure at 10m (free field) dB(A): 64 Electrical data: Voltage V: 400, Frequency Hz: 50, Phases: 3 Max. current consumption (A): 125 Max. power consumption (kW): 86.6 Dimensions: Length mm: 6,600, Width mm: 2,424, Height mm: 3,180 Nsdpfx Aqowmb T Eovjlb Weight (transport/operating) kg: 4,194 / 8,449 Connection DN 150 Reference: AB 9038 Year of manufacture: 2024 Condition: Visual 1, Technically OK & tested Test facility, as new Price: on request in Euro (plus VAT ex works Nettetal) – 12 months warranty (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 88131 Lindau

Condition: good (used), Swegon Teal 16.2ST 2PS air cooler water chiller Refrigerant R401A Nsdoqqhrhspfx Aqvjlb

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW Nlsdpfx Aqeg Ey T Eovob medium: water up to 200°C Max. external volume: 43 ltr at 200°C max. Flow rate: max. 230 l/min  max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions LxWxH: 1,460 x 525 x 1,200 mm  Weight approx. 330kg Circulation medium connection: flange DN40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Control and regulation Smart Controller (7" touch display) -Heating control via solid-state relay -Control box IP54, externally ventilated -Expansion tank, heater and piping stainless steel -Heating via stainless steel tubular heating elements made of Incolloy -Dirt trap (circulation) -Unit ready for connection and mounted on castors, 2 of them steerable and with brake -Cooling and filling controlled by solenoid valve -configurable automatic filling via KW inflow or separate connection (factory-supplied via cooling water inflow) -flow measurement by differential pressure principle -Level monitoring by magnetic float switch -automatic temperature-dependent system closure (not with WP7-90) -flow monitoring by recording the flow rate -Bypass between flow and return with reduced cross-section -dirty filter in the cooling water inflow, filling and return of the circulation system -Continuous bypass of the heat exchanger via 3-way motorised control valve (WP7-180/200) -System pressure monitoring via pressure transmitter in the AD tank (WP7-150/180/200) -Pressure booster pump for system filling (WP7-180/200, otherwise optional) -Safety temperature limiter (STB) in the heater and flow (WP7-200) -Pressure gauge in the supply line on the back of the unit -heat-insulated circulation circuit (WP7-150/180/200) Visit our website for more details or for other performance classes. *This unit is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating power hot circuit: 48 kW heating capacity cold circuit: 12 kW cooling capacity hot circuit: 42 kW cooling capacity cold circuit: 270 kW medium: water up to 200°C Max. external volume: 10 ltr at 200°C Max. flow rate: up to 200 l/min  max. delivery pressure: up to 6,5 bar motor power: 5,5 kW Dimension LxWxH: 1.395 x 753 x 1.180 mm Weight approx. 580 kg *HIGHLIGHTS EQUIPMENT: -regulation and control via SPS with touch screen -heating via stainless steel tubular heating elements made of Incolloy -Heating control via solid-state relay -control box IP54 externally ventilated2 -electrical wiring on terminal blocks -pot. free input for signal for cold/warm changeover (front door) - Pot.-free contact for collective alarm on 3-pin plug-in connector (front door) (front door) -temperature control unit with heating and cooling circuit, for connection of a valve station for quick changeover between hot and cold circuit -temperature controlled feed of the return water -level monitoring with automatic level compensation -dirt filter in the cooling water supply and in the return of the circulation system Nlsdpeg Ey Ufefx Aqvob -Separate automatic filling with strainer -Flow measurement in differential pressure principle in both circuits -monitoring of the heating rod surface by temperature sensors -System pressure control, necessary compressed air connection: 6 to 8 bar -booster pump type DS 360 for water make-up -corrosion-resistant components (VA, MS) -unit mounted on rollers and ready for connection *OPTIONS: -System EcoTemp for intermittent operation -connection for ext temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This device is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *Technical Specification: device type: 6/95 heating capacity: 6 kW cooling capacity: 45 kW Medium: water up to 95°C maximum external volume: 50 ltr at 95°C *Equipment hydraulic: - Cooling and filling controlled by solenoid valve - Automatic from cooling water or manual filling (at filling nozzle/option) - Level monitoring by magnet float-switch Nsdpfx Asfnvvisqvslb - Dirt trap in from process line of circulating system and cooling water inlet - Pump reversing for leak-stop operation - Manual mould draining via leak-stop operation and venting by tap at backside of unit - Filling time monitoring and aquatimer - Cool down mode (temperature adjustable) - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow metering *Equipment electrical: - Controller SBCmini, with relay for collective alarm 230V switchable, on the back of controller on terminal - Heating control by SSR - Control cabinet IP54 - Interface 20mA TTY; pinning Arburg - Cekon plug 16A *General equipment: - Corrosion resistant components (stainless stell, brass) - Heating rod made of Incoloy - Unit mounted on rolls, two pieces steerable with break - Additional temperature fuse for safe heating switch-off by contactor *Cooling: Power: 45 kW (stainless steel plate heat exchanger) Cooling water connection: Socket G3/8" IG (Performance data at 80°C flow and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of 3 bar) *Pump: Type: T401 Output rate (max): 40 ltr/min Pressure (max): 3,8 bar Motor capacity: 0,5 kW Construction: submersible pump / peripheral wheel *Dimensions/Weights/Colours Dimensions L/W/H: 514 mm x 238 mm x 493 mm (w/o conne.) Weight: approx. 30 kg Colour: Case: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulating medium int. thread G1/2" Cooling water int. thread G3/8" Filling (option) *This unit complies to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard will be indicated in offers or order confirmations.

Condition: new, *Technical standard specification: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C max. Flow rate 57l/min  max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Weight approx. 80 kg Nedpfx Aqjftm Hrsvolb HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled - Tool emptying by suction - Booster pump for tool filling at high temperatures - Filling via cooling water can be switched to separate filling - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW medium: oil up to 350°C Maximum external volume: 66 ltr at 350°C max. flow rate: up to 150 l/min  max. delivery pressure: up to 8,0 bar Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Weight approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Regulation and control unit Smart Controller (7" Touch-Displ) -Heating control via solid-state relay -Control box IP54 -Cooling controlled via solenoid valve -Flow measurement using the differential pressure principle -Bypass between flow and return with reduced cross-section -Level monitoring by means of magnetic float switch -flow monitoring by recording the heating rod surface temperature and the flow rate -dirt filter in the cooling water supply and in the return of the circulation system Nedpsg Ey Rfefx Aqvslb -monitoring of the flow temperature by electronic safety temperature limiter -external oil filler neck -Dilo fittings on internal piping connections (except pump connections) -at 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanketing with pressure gauge and safety valve 0.5 bar at 350°C (option) Visit our website for more details or for other performance classes. *Unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be stated in quotations or order confirmations.

Condition: new, *Technical standard specification: Unit type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C flow temperature and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of at least 2 bar) Medium: water up to 150°C Maximum external volume: 9 ltr at 150°C *Functional equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return flow of circulation and cooling water inflow - Reversing circuit for leakage stop operation (usable up to system closing temp.) - Ball valve in flow & return - Automatic temperature-dependent system closure - Filling time monitoring and aquatimer - Adjustable pump overrun Nljdpfx Aofnvwqsqvob - Adjustable temperature alarm - Options: Interface cable - Regulation and control unit SBCmini, with relay for common alarm, 230V, on rear of controller on terminal block - Heating control SSR - Control box IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A - Corrosion-resistant components (VA,MS) - Unit mounted on castors, two of them steerable with brake - Additional temperature fuse for safe shutdown of the heating on heating contactor - Bypass between flow and return with reduced cross-section *Pump: Type: Y2051 Delivery rate (max) 27 ltr/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Type of submersible pump / peripheral impeller *Dimensions/Weights/Colours Dimensions L/W/H: 600 mm x 240 mm x 493 mm (without connection) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium socket G1/2" cooling water socket G3/8" *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. Nlodpfxjg Ezaro Aqvob *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, Year of construction: 2018, Cooling system ICS Cool Energy IC 660, 166 KW cooling capacity (15°C/25°C) pump and tank Nljdpfxovurk Ej Aqvob Year of construction 2018 Price: €19,500 Contact person: Mr. Rainer Eckerle

Year of construction: 2008, condition: good (used), heating cooling device Regloplas 90 XL M 90°C 21,5 kW Njdpeh Uubhofx Aqvelb year: 2008 price: 2.150 € contact: Mr. Rainer Eckerle