With cooling unit and compressor
Bokq393pri
Capacity: 2000-2500 bph
Bottle: 0,5 l
The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015.
Etdbijn
Technical parameters :
- screw diameter: 40 mm
- screw L / D: 22: 1
- injection weight (HDPE): 190 g
- maximum speed of the screw: 10-225 rpm.
- heating power: 8.3 kW
- injection clamping force: 292 kN
- blow clamping force: 46.7 kN
- maximum plate size (L x W): 400 × 270 mm
- minimum mold thickness (H): 180 mm
- mold heating capacity: 3 kW
- opening: 220 mm
- drying cycle: 3.5 se...
ADS G66C blow molding machine
Capacity: 8,000 bottles / h
Btkgldqwbw
Number of slots: 6
Year of production: 1997
Machine with air recovery
Form: 1.5 liters
Number of hours worked: 33,408 h
Included:
- preform basket tipper
- preform feeder
- 800 l air tank
- sterilizing filter
- preform chiller MTA year 2003
The machine is in very good condition, regularly serviced, the machine can be checked in a dry mode.
Semiautomatic PET Bottle Blow Molding Machine PV-30 is an two-step bottle stretch blowing machine. It has 1 cavity and the capacity range of the products is from 19.0 L to 30.0 L PETor PET KEG, barrels and cans with productivity up to 40 b/h
Be2lvzphfl
Output: 280kg/h, clamping force: 400kN, installation height: 500mm, opening stroke: 900mm, dimensions clamping plates: 700x830mm, drive power: 129kW, heat output: 43.1kW, connected load: 172.1kW, operational hours: 70,000h, with partial wall thickness distribution control PWDS.
Ssojrg
Automatic PET Bottle Blow Molding Machine A-3000-4 is an automatic two-step bottle stretch blowing machine. It has 3 cavities and the capacity range of the products is from 0.25L to 2.2 L with productivity up to 4 000 bottles (1.0L) in hour.
Vc2buji
Brand: LOG MACHINE
Jb9slc9dc
Shot weight: 298 g
Screw diameter: 45 mm
Clamping force: 160 ton
Opening stroke: 430 mm
Distance between tie bars: 460x460 mm
Mold thickness: 180-500 mm
Clamp Force (kN) 1570, Screw Diameter (mm): 45
Pqc7f0q
ARBURG 630S 2750-800/290 2K machine / production line with Wittmann W823 robot, rotary table, 2 conveyor belts and protective housing
Year of manufacture: 2015
Injection unit:
Screw diameter: 45 mm
Injection weight: 291 g
Injection pressure: 2470 bar
Dosing volume: 318 ccm
clamping unit :
clamping force: 275 t
tie bar distance: 630x630 mm
size of clamping platens: 900x900 mm
ejector: hydraulic
clamping unit: hydraulic
control system:
SELOGICA - touch control panel
Additional equipment:
Productio...
Praline forming machine, praline shaper,
-Conveyor belt missing
-Chocolate forming machine
-Execution: stable
-Conveyor belt width: 110 mm
-2x press rollers: Ø 145 mm
-1x molded body: with ejection
-1x machine with shape ellipse: approx. 20 x 35 mm
Rlt00ry
-Transport dimensions: 1540/520/H1420 mm
-Weight: 280 kg
screw size:40 mm
Hmblxsik3
injection shot weight in Polysterol:210 g/PS
closing pressure:2800 kN
screw size:70 mm
clamping force:5.000 kN
screw size:70 mm
max. swept volumne:1.155 cm³
injection pressure:1.480/1.780 bar
screw size:35 mm
max. swept volumne:190 cm³
injection pressure:1.700/2.390 bar
clamping force:500 t
Vudjom
tie bar distance:910 x 830 mm
mould hight min.:350 mm
opening stroke:1.250 mm
microprocessor control:CC200 A02
screen text:deutsch
Manual:deutsch /german
core pull:4 x
Hotrunner:16 x
Motor output:74,0 kW
total connection power:113,4 kW
total weight:25.750 kg
dimensi...
screw size:15 mm
injection shot weight in Polysterol:15 g/PS
closing pressure:600 kN
daylight:370 x 370 mm
opening stroke:450 mm
mould height - Max./min.:200 mm
control:Selogica
daylight between platens - max.:650 mm
weight of the machine ca.:3 t
ONLY 2.144 automatic hours
ONLY 4.667 Pump hours
U version II
- wear resistant plastification unit
- with Selogica control with touch screen
- technology stage 2 - wiith 2 regulating pumps
- electrical connection for pneumatic needle valve nozzle 1...
Clamp Force (kN) 2160, Screw Diameter (mm): 50
Bxbimeadob
ARBURG 630S 2500-1300/350 / two-component machine
Year of manufacture: 2003
injection unit:
Screw diameter: 70 mm
injection weight: 826 g
Injection pressure: 1470 bar
Dosing volume: 904 ccm
clamping unit :
clamping force: 250 t
tie bar distance: 630x630 mm
size of clamping platens: 900x900 mm
ejector: hydraulic
Lti3a07z
clamping unit: hydraulic
Control system: SELOGICA
Additional equipment:
Euromap
Robot interface
Hydraulic core pull x 1
Control with hot runners x 12
Proportional valve on both i...
Manufacturer: Arburg
Type: 630S 2500-1300
Control Selogica
Year of manufacture: 2003
Operating hours: approx. 59.000 h
Special features/extras:
Core pull
tool heating 6 x
high wear resistant screw
Interface coloring
Handling interface Euromap 67
blow out device 3 x
Conveyor Interface
Various programs:
- ext. monitoring
- advanced movement
- extended locking program
- production control
- order change
- freely configurable side
clamping unit side:
Clamping force: 2500 kN/...
screw size:45 mm
Hmqniob
injection shot weight in Polysterol:149 g/PS
closing pressure:1250 kN
Screw diameter: 30 mm
Screw speed: 20-300 r/m
Max stroke volume: 99 cm3
Max shot weight: 114 g
Closing force: 45 t
Opening path: 200 mm
Ejector force: 2t
Ejector path: 20 mm
Mold installation height min.: 264 mm
Buzceyznkg
Plate spacing max.: 464 mm
Platten size: 860x320 mm
screw size 25 mm
moulding weight 41,8 g
closing pressure 350 kN
tie bars distance 304 x 304 mm
opening stroke 325 mm
dayligth 150 mm
injection pressure 2149 bar
total power requirement 14,5 kW
weight of the machine ca. 2,2 t
Oiphs8gvy
Control: Unilog 4000 B
Machine has one pit draw.
belt convoyer
HB-Therm 80°
Serial Nr. A35/04/11/0/05
Clamp Force (kN) 2550, Screw Diameter (mm): 0
Bxbiirr97v
ARBURG 520C 2000-675 with robot Wittmann W818 / machine in very good technical condition
Year of manufacture: 2002
injection unit:
screw diameter: 45 mm
injection weight: 240 g
Injection pressure: 2500 bar
Dosing volume: 286 ccm
clamping unit :
clamping force: 200 t
tie bar distance: 520x520 mm
size of clamping platens: 685x685 mm
ejector: hydraulic
clamping unit: hydraulic
control system:
SELOGICA
Additional equipment:
Svbhbw
Euromap 67
Euromap 12
Robot interface
Hydraulic core pull x 1
Injecti...
screw size:35 mm
injection shot weight in Polysterol:142 g
clamping force:1200 kN
INJECTION UNIT - HORIZONTAL:int. Größe 330
screw size:35 mm
max. swept volumne:154 cm³
injection shot weight in Polysterol:140 g/PS
injection pressure:1.595 bar
INJECTION UNIT - piggyback:int. Größe 80
screw size:22 mm
max. swept volumne:38 cm³
injection shot weight in Polysterol:34 g/PS
injection pressure:1.590 bar
clamping force:120 t
tie bar distance:holmlos mm
plate dimensions -w x h:790 x 680 mm
mould hight m...
screw size:*** mm
injection shot weight in Polysterol:*** g/PS
closing pressure:1100 kN
Pagph
Clamping force: 1000 ton
Opening force: 40 ton
Mold opening path: 1900 mm
Clear axial distance h x h: 1550 x 1200 mm
Clamping plate distance: 2000x1605 mm
Ejector force: 200 kN
Ejector stroke: 300 mm
Screw diameter: 90 mm
Injection pressure: 2300 bar
Injection volume: 2799 cm3
Shot weight: 2407 g
Bvklllmuko
Control MOSAIC
Core pulls 2 + 2 NG10
Daylight between platens max 1.900 mm
Dimensions (long x wide x high) 11.800 x 3.300 x 2.600 mm
Technical parameters :
- control: UNILOG 4000
- clamping force: 75 tons
- opening force: 53 kN
- external panel size: 640 x 640 mm
- spacing between columns: 404 x 404 mm
- column diameter: 65 mm
- min. mold height: 250 mm
- column spacing: 400 mm x 304 mm
- plate size: 640 mm x 540 mm
- mold opening stroke: 375 mm
- max. mold opening: 625 mm
Frexh9c
- ejector force: 17.5 kN
- ejector stroke: 160 mm
- dry cycle: 32 1 / min.
- screw: 35 mm
- screw stroke: 140 mm
- screw speed: 0-275 min.
- nozzle...
Clamp Force (kN) 340, Screw Diameter (mm): 25
Bxbif2xnjm
ARBURG 520C 2000-675 with robot Wittmann W430
Year of manufacture: 1998
injection unit:
screw diameter: 45 mm
Bw70snzjft
injection weight: 240 g
Injection pressure: 2500 bar
Dosing volume: 286 ccm
clamping unit :
clamping force: 200 t
tie bar distance: 520x520 mm
size of clamping platens: 685x685 mm
ejector: hydraulic
clamping unit: hydraulic
Control system: SELOGICA
Additional equipment:
Euromap
Robot interface
Air valve x1
Hydraulic core pull x2
injection unit hardened - bimetal
The machine is...
screw size 22 mm
moulding weight 33,4 g
closing pressure 200 kN
tie bars distance 254x254 mm
opening stroke 300 mm
dayligth 125 mm
Bd32cnqg3
Dimensions (L/W/H) 2,6x1,1x1,7 mm
total power requirement 9 kW
weight of the machine ca. 2 t
screw size:*** mm
Brd8iddk
injection shot weight in Polysterol:*** g/PS
closing pressure:*** kN
ENGEL electric EMAX 200/100
Clamping force: 100 ton
Bwpyga2a8l
Screw diameter: 25mm
Technical data :
- CNC control: UNILOG 4000 B
- maximum clamping force: 50 tons, 500 kN
- opening force: 40 kN
- meter reading: 9852,8 h
- maximum injection volume: 99 cm3
- maximum injection pressure: 2022 bar
- maximum processing temperature: 450 degrees C
- auger: 30 mm
- plasticizing capacity: 10.5 g / sec.
- screw stroke: 140 mm
- screw speed: 0-290 min.
- nozzle stroke: 200 mm
- heating power of heaters: 7.88 kW
Bfgqvknipg
- external panel size: 480 x 480 mm
- spacing between columns: 304 ...
Clamp Force (kN) 780, Screw Diameter (mm): 20
Gxsrrg
ARBURG 470C 1500-150/150 / 2K machine / machine in very good technical condition
year of manufacture: 2005
injection unit:
Ltgggijq
screw diameter: 25 mm
injection weight: 49 g
Injection pressure: 2500 bar
Dosing volume: 54 ccm
clamping unit :
clamping force: 150 t
tie bar distance: 470x470 mm
size of clamping platens: 685x685 mm
ejector: hydraulic
clamping unit: hydraulic
Control system: SELOGICA
Additional equipment:
2K machine
Euromap 67
Robot interface
Air valve x1
Hydraulic core pull x 1
In...
screw size:100 mm
injection shot weight in Polysterol:3.574 g
clamping force:13.000 kN
INJECTION UNIT:9200
screw size:100 mm
max. swept volumne:3.927 cm³
injection shot weight in Polysterol:3.574 g/PS
injection pressure:2.352 bar
CLAMPING UNIT:.
closing pressure:1.300 t
tie bar distance:1.600 x 1.250 mm
mould hight - min.:650 mm
mould hight - max.:1.400 mm
opening stroke:2.430 mm
CONTROL:.
microprocessor control:Unilog B4
Or2fd
screen text:deutsch / german
Manual:deutsch / german
EQUIPMENT...
screw size:45 mm
Bxdbsjeyr8
injection shot weight in Polysterol:149 g/PS
closing pressure:1250 kN
1,0 St. gebr. Spritzgießmaschine
Zr8sesy
Hersteller: DEMAG
Typ: Ergotech80/420-310System
Baujahr: 2000
Schließkraft: 80 Tonnen
Schnecken DN: 35 mm
Spritzteilgewicht: 151 g / PS
Steuerung: NC4
Ausstattung:
1 x Kernzug
Schnittstelle Roboter
Injection ENGEL ES 330/80 HL ST built in 1997 in Austria.
Technical parameters :
- CNC control: EC88
Injection elements:
- screw diameter: 35 mm
- injection weight: 140 g
- injection pressure: 1600 bar
- injection volume: 154 ccm
Closure components:
- closing force: 80 t
- table top dimensions, max .: 730 x 600 mm
- ejector: hydraulic
- closing system: hydraulic (tie-bar-less)
Dimensions:
- weight: approx. 6000 kg
- dimensions of the machine (length x width x height): 3.91 x 1.38 x 2.05 m
P...
Clamp Force (kN) 490, Screw Diameter (mm): 25
Fw2zn37
ARBURG 470C 1500-800 / machine in very good technical condition
Year of manufacture: 2004
injection unit:
screw diameter: 50 mm
injection weight: 359 g
Bw70px8wrk
Injection pressure: 2000 bar
Dosing volume: 392 ccm
clamping unit :
clamping force: 150 t
tie bar distance: 470x470 mm
size of clamping platens: 650x650 mm
ejector: hydraulic
clamping unit: hydraulic
Control system: SELOGICA
Additional equipment:
Hybrid machine: energy saving, high speed and very quiet.
Hydraulic core pull controlled b...
screw size:30 mm
injection shot weight in Polysterol:65 g/PS
closing pressure:400 kN
daylight:270 x 270 mm
opening stroke:350 mm
mould height - Max./min.:200 mm
control:Selogica (1. Version)
daylight between platens - max.:550 mm
total power requirement:21 kW
dimensions of the machine ca.:4,30x1,60x2,08 m
Bdwqo9ro3s
few operation hours - condition like new -
- wear reisistant plastification unit
- fully hydraulic clamping unit
- with Vario system
- mould blow unit
- sorter unit
- interface ...
screw size:45 mm
injection shot weight in Polysterol:149 g/PS
Kaieoz
closing pressure:100 kN
Hersteller: ARBURG
Typ: 320C500-100
Baujahr: 2002
Schließkraft: 50 Tonnen
Schnecken DN: 30 mm
Spritzteilgewicht: 36 g / PS
Steuerung: SELOGICA
Bwy2d9gg0s
Ausstattung:
1 x Kernzug
Schnecke Hochverschleißfest
Euromap 32 - polig
Zylindereinheit bis 450° C
Anschluss Selektiereinheit
Injection molding machine SANDRETTO MODULA 270/1372 MACH 2 produced in 1999 in Italy.
Technical data :
- machine version: HP - High Pressure
Ddltbtf
- injection volume: 665 cm3
- clamping force: 2650 kN
- initial opening force: 530 kN
- column spacing: 570 x 570 mm
- screw diameter: 60 mm
- length, width, height: 8.40 x 1.80 x 2.38 m
- machine weight: 10,300 kg
Clamp Force (kN) 1180, Screw Diameter (mm): 35
Bxbh37ueqo
