Used Copier Printer Scanner for sale (2,993)

Condition: excellent (used), Objet Stratasys Model: Objet260 Connex 2 Stratasys Objet260 Connex 2 3D Printer + Cleaning Glovebox Computer, Monitor, Software: Objet Studio Ver. 9.2.11.6825 The Objet260 Connex 3D printers from Stratasys are based on PolyJet technology and allow you to combine two or three base resins in a single print run, allowing you to create prototypes from three materials, as well as simulate overmolding or populate build plates with selected models. Using triple-jetting technology, the Objet260 Connex creates prototypes with up to 27 material properties simultaneously in a single part. The device enables high-resolution 16-micron layers for printing complex geometries, smooth surfaces, and thin walls. Model Materials: Solid and opaque (VeroWhitePlus, VeroBlackPlus, VeroGray, and VeroBlue) Rubber (Tango family) Transparent (RGD720 and VeroClear) Simulated polypropylene (Endur and Durus) Biocompatible (MED610) Heat-resistant (RGD525) Digital Materials: Chsdpfx Aov Rw Etoddof Digital ABS and Digital ABS2 Wide range of light transmission values Rubber compounds with a range of Shore A hardnesses Simulated polypropylene materials with improved heat resistance Applications: Visual prototypes Functional prototypes Equipment and devices Architectural models Medical models Injection molds Concept models Technical specifications: Build volume: 255 × 252 × 200 mm Layer thickness: Horizontal layers of only 16 µm Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Accuracy: 20 to 85 µm for components smaller than 50 mm; up to 200 µm for the full model size (only for solid materials, depending on geometry, design parameters, and model orientation) Size and weight: 870 × 735 × 1200 mm; 410 kg AC connection: 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Or 200–240 VAC, 50–60 Hz, 7 A, single-phase Condition: used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2010, condition: ready for operation (used), Offered are 2 fully automatic stand-alone stencil printers for SMD assembly technology, PCB assembly year 2010. Fully automatic vision system, Linux-based operating software, double loading system, motorized table drive, large printing area X/Y 440mm/440mm, frame size X/Y max. 670mm/700mm, PCB thickness max. 6mm, cycle time approx. 18-25 sec., product changeover time < 5 min., squeegee pressure 4-24kg programmable, snap-off/separation speed programmable, compressed air supply 6bar approx. 60l/min., dimensions X/Y/Z 2080mm/1130mm/1450mm, signal tower 2000mm, weight approx. 285kg. Inspection possible by appointment. Chjdpexzt Dpofx Addjf

Condition: excellent (used), functionality: fully functional, operating hours: 1,978 h, total length: 864 mm, total height: 1,626 mm, total width: 711 mm, type of input current: three-phase, overall weight: 227 kg, input voltage: 230 V, 🎯 For Sale: Stratasys F270 3D Printer – Professional, Excellent Condition 🔧 Type: FDM 3D Printer 🏢 Make & Model: Stratasys F270 📍 Location: Anzegem, Belgium We are specialized in the design and printing of moulds for automotive products. ✅ Technical Specifications • Build Volume: 305 x 254 x 305 mm • Print Materials: ASA, ABS-M30, PLA, ABS-CF10 (carbon fiber), TPU 92A • Layer Thicknesses: 0.127 mm / 0.178 mm / 0.254 mm / 0.330 mm • Support Material: Hands-free soluble & breakaway • Colours: Up to 11, including black • Software: GrabCAD Print • Material Feed: Automatic change-over between trays • Model & Support Material Channels: 2 & 2 • PC Requirements: Windows 10 & 11, app for Apple & Android • Network: Ethernet TCP/IP, Wireless IEEE 802.11n/g/b • Machine Dimensions: 1626 x 864 x 711 mm • Weight: 227 kg • Power Supply: 220–240V, min. 7A • Safety Certifications: CE / FCC / EAC / EMC / TUV / RC / RCM / RoHS / WEEE / Reach 🧰 Included • 2 print heads included: 1 print head for model material, 1 print head for support material, both Chedpfx Adoxnz Hrodjf

Condition: like new (used), functionality: fully functional, Year of construction: 2022, total length: 1,480 mm, total height: 2,040 mm, total width: 850 mm, overall weight: 360 kg, input voltage: 220 V, input current: 32 A, Mint condition XYZPrinting MfgPro230xS 3D printer from 2022. The device has hardly been used and is in excellent condition - perfect for anyone looking for a reliable and powerful 3D printer. Why the XYZPrinting MfgPro230xS? Outstanding print quality: With its precise printing technology and a resolution of up to 50 micrometers, the MfgPro230xS delivers impressive print results that meet the highest industrial standards. High printing speed: Save valuable time during production. The MfgPro230xS offers fast printing speed without compromising on quality. Large installation space: With a generous print volume of 230 x 230 x 230 mm, even larger projects are no problem. Ease of use: The simple operation and intuitive interface make this 3D printer easily accessible even for beginners. Reliability: Thanks to its robust design and high-quality components, the MfgPro230xS is extremely durable and reliable. With the XYZprinting MfgPro230 xS industrial 3D printing system, the most complex structures can be produced in one piece and without support structures using selective laser sintering in your workshop. Developed for professional use as well as for use at institutes and universities. Chjdpfxjt H I Tvo Addjf Accessories: Sinterit FZ138 PHS Station Sinterit FZ101 ATEX Vacuum Cleaner 230V Sinterit Sandblaster SLS N2 Generator

Condition: used, Year of construction: 2018, functionality: limited functionality, The fuser unit must be replaced (see photo), otherwise the device is functional. Sold without warranty Csdpfx Aev Tzlpoddohf

Condition: used, EOS Type: P100 Chjdpfx Adjxpux Rjdof Technical Data: External dimensions: 1320 mm x 1067 mm x 2204 mm Technology: SLS Material class: Polymers Materials: PA220 Build volume: 200 x 250 x 330 mm Laser type: CO2; 30 W Capable of producing delicate components with wall thicknesses down to 0.4 mm. Fits through a standard door (1067 mm width); therefore, it can be installed in regular premises. + 6 filled powder containers PA2200 (PA12) + 2 build frames 400 V +6%/-10% at 50/60 Hz; CEE 5-pole Condition: used Scope of delivery: (see image) (Subject to technical modifications and errors. All information is provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Type: AM250 / SMC Thermo Chiller HRS024-A-20-T Complete system for metal 3D printing / additive manufacturing Description For sale is a complete metal 3D printing system consisting of: Renishaw AM250 Additive Manufacturing System SMC Thermo Chiller HRS024-A-20-T (MS400) for precise temperature control The system originates from an industrial research environment and was used for additive manufacturing of metal components. The AM250 is renowned for its high process stability, repeatability, and Renishaw’s proven powder bed technology. The accompanying thermo chiller ensures a constant operating temperature and is specifically calibrated to the system. Technical Data – Renishaw AM250 Description / Value Machine Number: 380T38 Control Cabinet No.: AM250 Operating Voltage: 230 V Phases: 1 PH + N + PE Control Voltage: 24 V DC Heating Power: 2 kW Current Consumption: 16 A Operating Temperature: 15°C – 30°C Overload Protection: Circuit Breaker Technical Data – SMC Thermo Chiller HRS024-A-20-T (MS400) Chjdpoxnzu Ajfx Addsf Description / Value Model: HRS024-A-20-T (MS400) Cooling Capacity: approx. 2.4 kW Operating Voltage: 230 V AC, 1 phase Temperature Range: 5°C – 35°C Refrigerant: R407C Condition: used Scope of Delivery Renishaw AM250 main unit SMC Thermo Chiller HRS024-A-20-T (MS400) Control and connection cables Control module / Control cabinet (Specifications and data subject to change and error!) We are happy to answer further questions for you by phone.

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Chodpfxoqzgvhj Addsf Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Power consumption maximum 2.3 kW 13A Scope of delivery: See pictures Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), German reprap (innovatiq) Type: German RepRap X500 RepRap 3D printer Technical Data: Material: Composite materials (carbon fiber, glass, Kevlar) Technology: Fused deposition molding (FDM/FFF) Dimension: 1120 × 850 × 955 mm Weight: 185 kg Nozzle diameter: 0.4 Ø mm Printing speed: 10 - 150 mm/s mm/sec Precision XY: +/- 0.05 mm µm Max. Volume: 500 × 400 × 450 mm Power: 230 V AC 50Hz 10 A 2.3 kW Further features: Touchscreen Condition: second-hand / used Scope of delivery: (see pictures) + filament rolls (PETG) and printing accessories Only PC (WIN 7) available! Screen and input devices not! License for current software to operate the printer must be purchased by the customer (approx. 200 Euro for Simplify3D)! (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Chodpfx Adeuif Izjdef

Condition: good (used), 3DGENCE Type: Industry F420 Year of manufacture 2021 Technical data: Working space: 380 × 380 × 420 mm (60 648 cm³) External dimensions (WxDxH): 900mm x 950mm x 1950mm Cedpfjt I Dm Iox Addshf Printing system: double extruder equipped with cleaning system Diameter of the filament: 1.75 mm Printing material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: soluble support material ESM-10, HIPS Filament chamber: 4 places for the filament with automatic exchange system Temperature of the print head (max.): 500°C Temperature of the print bed (max.): 180°C Temperature of the working chamber (max.): 180°C (active heating) Temperature of the filament chamber (max.): 50°C Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone. Written orders can be placed by email or fax

Condition: excellent (used), Coherent Type: Creator RA (3D Metal Printer) Included Equipment: - Sieve Station Retsch AS200 basic (with the following sieves: 2x 63 µm, 1x 200 µm, 1x 250 µm) - Sandblasting Device Reitel Sanduret 2 S - Ultrasonic Cleaner Allpax Palssonic UD22 - Wet Vacuum Cleaner Ruwac NA7-11 H (ATEX certified) - Various accessories (approx. 15 new steel build platforms, 1x replacement filter, recoater lips, original sealed printing material approx. 22 kg 17-4PH) Technical Specifications: - The printer requires a new license and PC - Laser Power: Yb: Fiber 250 W, Wavelength 1070 nm - Build Platform: 100 mm x 110 mm (Diameter x Height) - Dimensions: 717 mm x 858 mm x 1794 mm - Accuracy: Repeatability (x, y, z = 15 µm), typical accuracy 40 µm, minimum feature size (x, y = 80 µm, z = 20 µm) - CREATOR® RA supports titanium, aluminum, and non-reactive materials. Sieve Station Retsch AS200 basic (with the following sieves: 2x 63 µm, 1x 200 µm, 1x 250 µm) Sandblasting Device Reitel Sanduret 2 S Ultrasonic Cleaner Allpax Palssonic UD22 Various accessories (approx. 15 new steel build platforms, 1x replacement filter, recoater lips, original-sealed printing material approx. 22 kg 17-4PH) File formats: STL, STEP, IGES, Object Electrical requirements: 230 V / 1 Ph / 50 Hz / 16 A Condition: used Cedpfjwupvkox Addohf Scope of delivery: (see pictures) Weight: 360 kg (Specifications may be subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: used, Concept Laser M2 cusing Multilaser: System technology for the safe processing of aluminum and titanium alloys, etc. External dimensions: 2542 x 1818 x1987 mm (WxDxH) Weight: 2300 kg 2 lasers 400W Power supply: 3P/N/PE AC 400 V, 32 A 5 bar compressed air required Protective gas possible through 2 connections for external N2 generators (optional) Installation space 250 x 250 x 280 Layer thickness 20-80μm Production speed 2-20cm³ (depending on material and laser power) Operating conditions 15-35 degrees Celsius Laser service life Laser 1: 501 hours Laser 2: 503 hours Other devices: Inox 200 lifting device Weight: 102 Kg Max lifting capacity 135 Kg Protection class IP65 Wet cutter NA 7-11 H CL EU Zone 22 Dimensions 800x480-570x755-850 mm Drive type: alternating current Power 1.25 kw Voltage 230 V 9.2 A Protection class IP65 Frequency 50 Hz Housing: sheet steel Performance 130 m³/h Permanent negative pressure -145 mbar Short-term negative pressure -235 mbar Liquid volume 7 l Water consumption: 0.26 l/h Weight: 50 kg QM powder Automatic Sieving Station Power supply: 3/N/PE AC 400 V +/- 10% 50/60 Hz Max. current consumption: 3A / phase Inert gas: 5 bar Condition: used / used Scope of delivery: (See picture) Cjdpfx Adou Ebybsdshf (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Chjdpfx Adeqy Edyjdof Power consumption maximum 2.3 kW 13A Scope of delivery: See pictures Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Solid-state Nd: YVO4with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000mW at the resin surface under standard conditions) Zaphyr TM coating system: Process: Replaceable coating agent Adjustment: Self-leveling and self-correcting Production layer: Minimum 0.05mm Maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Detection of large lines Nominal: 0.76mm Maximum drawing speed Edge detection: 3.5m/sec. Detection of large lines: 25m/sec. Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Ambient conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirement: Size (WxDxH), unpacked: 1260mm x 2200mm x 2280mm Weight packed (no RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) Cedsnkalgspfx Addohf (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. Thus, even large models can be manufactured without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one print run. 3D color printer with enormous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. Cedpfxjhb Dtpj Addehf This eliminates the need for dedicated support structures, even for complex and detailed prints with these 3D printers. The unconsolidated powder supports the parts during printing and is then recycled semi-automatically. Areas of application Communication of form and design, installation analysis, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for thermoforming, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of full color 3D printing systems. Technical data: ZPrinter ProJet 660 Pro 3D Printer Size: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum detail size: 0.1 mm Automation: Complete (automated set-up and self-monitoring, automated print

Condition: excellent (used), Rexcan Type: 3D scanner Rexcan CS2 + 3-axis swivel table TA 300+ Technical data: 6.0 MP camera 1 lens set FOV:125,250,500 V:125,250,500 B:95,195,380 H:80,155,320 SPA:0.036, 0.072, 0.145 G:0.01-0.015, 0.02, 0.03 Triangulation angle = 25 degrees PC and software included (screen not included) Scan software: eZScan 2017 Geomagics Control X Version 2018.1.2 Scanner “Rexcon CS2” Rotary table “TA300+” Optics set 125, 250, 500 Calibration plate for all three optics Clamping set Holder for small parts Cabinet on wheels + adjustable with integrated spirit level Condition: used Chjdpfxjvt Syds Addef Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Cedpfxok Hz Nqe Addehf Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Eos EOSINT plastic laser-sintering system Csdpfx Aoft R Swoddehf Here we offer an Eos EOSINT plastic laser-sintering system. Eos EOSINT Plastic Laser-Sintering-System P380 The EOS P380 system includes the following Installation space container Powder container Overflow tank Cooler: Termo TEK Termochiller Type: 802-18644-3 Unpacking stamp Removal trolley 3DM 8 zone process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. Laser power 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT P 380 condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-water cooler, replaceable Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Electrical connection / power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Chsdpfx Aou Ebt Uoddef Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with implant steel! Laser hours: 4954 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Keyence Model: VR-5200 Type: Measuring Head Light Sources Viewing Light Source: LED Ring Light (red, blue, green) Measurement Light Source: White LED Control Unit: VR-5000 Viewing and Measurement Range Macro Mode Magnification (based on a 15-inch monitor) 12×: Horizontal 24.0 mm Vertical 18.0 mm Magnification (based on a 15-inch monitor) 25×: Horizontal 12.0 mm Vertical 9.0 mm Magnification (based on a 15-inch monitor) 38× Horizontal 8.0 mm Vertical 6.0 mm Magnification (based on a 15-inch monitor) 50× Horizontal 6.0 mm Vertical 4.5 mm Micro Mode Magnification (based on a 15-inch monitor) 40× Horizontal 7.6 mm Vertical 5.7 mm Magnification (based on a 15-inch monitor) 80× Horizontal 3.8 mm Vertical 2.9 mm Magnification (based on a 15-inch monitor) 120× Horizontal 2.5 mm Vertical 1.9 mm Magnification (based on a 15-inch monitor) 160× Horizontal 1.9 mm Vertical 1.4 mm Zoom 1× to 4× Height Measurement Measurement Resolution 0.1 µm Chsdewc Sxdopfx Addef Height Measurement Range Without Z-Compositing Macro Mode: 10 mm Micro Mode: 1 mm With Z-Compositing Macro Mode: 50 mm Micro Mode: 30 mm Repeatability (σ) Without image stitching in Z 0.4 µm With image stitching in Z 1.0 µm Measurement accuracy Without image stitching in Z ±2.5 µm With image stitching in Z ±4.0 µm Width measurement Repeatability (σ) Macro mode: 1 µm Micro mode: 0.5 µm Measurement accuracy Macro mode: ±5 µm Micro mode: ±2 µm Image stitching Fully automatic measurement (automatic XY control + automatic Z focus), Automatic assignment, automatic area setup Measurable XY area 206 x 104 mm Stage XY travel 184 × 88 mm (motorized) Z travel 73 mm (motorized) Load capacity 4.5 kg Working distance 75 mm Image pickup element 4-megapixel CMOS, B/W Transmitter lens Dual telecentric lens x 2 Receiver lens Dual telecentric lens Data processing Dedicated PC according to KEYENCE specifications (Operating system: Windows 11 Pro) Power supply Voltage 100 to 240 V AC, 50/60 Hz Power consumption Max. 200 VA Environmental resistance Ambient temperature 15 to 30 °C Relative humidity 20 to 80% RH (no condensation) Weight Approx. 28 kg (weight of the measurement unit only: approx. 11 kg) Distance extension stage Viewing software VR-5000 Version 3.3.5.75 Image composition module VR-H3J Creates a single large image from a series of images captured with the viewing software. You see color images. Analysis Expansion Module VR-H3CA Extends the functionality of the analysis software. Can perform measurement comparison and 3D CAD measurement comparison. Condition: Used Scope of delivery: (as shown) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions over the phone.

Condition: used, 3DGENCE Type: Industry F420 Technical data: Working area: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900mm x 950mm x 1950mm Printing system: dual extruder equipped with cleaning system + Interchangeable nozzle head Filament diameter: 1.75 mm Printing material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic changing system Print head temperature (max.): 500°C Print bed temperature (max.): 180°C Work chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Codpfx Aownpbgeddohf Scope of delivery: (see pictures) Weight: 350 kg (Changes and errors in the technical data, specifications reserved!) We would be happy to answer further questions by phone. Written orders possible by email or fax

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-air cooler Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) Chedpfeu Ebufex Addjf 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Electrical connection / Power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with molybdenum! Laser hours: 2383 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Selective DMG Mori Type: LASERTEC 30 SLM Selective Laser Melting Machine Technical Specifications: Build volume: 300 x 300 x 300 mm Layer thickness: 20-100 µm Materials: Tool steel, stainless steel, cobalt-chrome alloys, titanium, aluminum, precious metal alloys, Inconel Laser: Ytterbium fiber laser Laser type: YLR-600-WC Dimensions: 448 x 580 x 132 mm Weight: 40 kg Cooling: Water Central wavelength range: 1070 ±10 nm Modulation frequency: 0-50 kHz Average power, max. 600 W Power adjustability: 10-100% Beam parameter: 0.37 mm x mrad Condition: used Codju Ebv Aspfx Addshf Scope of delivery: (See picture) (Subject to change and error in technical specifications and details!) We are happy to answer further questions by phone.

Condition: excellent (used), German RepRap 3D Printer Here we offer you a German RepRap 3D printer. The X1000 from German RepRap is a large capacity 3D printer that produces industrial quality objects. 3D Printer Datasheet: German RepRap X1000 Manufacturer: German RepRap Country: n.a. Material: Standards (PLA, ABS, PP ...) Technology: Fusion layering (FDM/FFF) Pre-assembled: n.a. Dimension: 1725 × 1500 × 1320 mm (67.91 × 59.06 × 51.97 in.) Weight: 400 kg / 881.8 lbs Nozzle diameter: 0.4 / 0.6 mm ( in.) Minimum print density: n.a. Print speed 150 mm/s mm/sec Precision XY: XY : 20 µm µm Max. Volume: 1000 × 800 × 600 mm File format: n.a. Software: Simplify3D Connectivity: Wi-Fi OS compatibility: n.a. Power: n.a. Other features: Touchscreen Type: German RepRap X1000 Condition: used / used Scope of delivery: (See pictures) Chedpeivpdwsfx Addef (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Cjdpfx Adjqzgvajdshf Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Power consumption maximum 2.3 kW 13A Scope of delivery: See pictures Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.