Used Copy Router for sale (886)

Condition: used, Year of construction: 2021, - Grinding width: 1100 mm - Grinding height: 3 - 170 mm - Grinding length: 1900 mm Wide-belt sanding machine Manufacturer: Felder Type: FW 1102 P Year of manufacture: 2021 Technical data - Contact roller unit - Fine sanding with segmented, electro-pneumatic sanding shoe, 25 mm segment width - Touchscreen color display 7" Hsdpfx Ajzuzcmsirow - Digital grit adjustment - Vacuum table incl. blower in the machine frame - Stepless feed speed 2.5 - 18 m/min, controllable from the touchscreen - Grinding width: 1100 mm - Grinding height: 3 - 170 mm - Grinding length: 1900 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2020, - Feed - Cutting - Cleaning - Infrared heating - UV curing - Coating - Digital printing - Structuring - Excimer matting - Stacking Digital printing system Manufacturer: Hymmen Type: JUPITER - JPT C 680/548 with OFS 850 Year of manufacture: 2020 Technical data - Nominal width: 680 mm - Maximum printing width: 548 mm (expandable to 680 mm) - Maximum panel width in the OFS: 510 mm - Working height: 900 mm (+50 mm) - Processing: Printing and top coating from above, back coating from below - Operating mode: two-lane up to a max. part width of 255 mm; otherwise single-lane - System speed: 8-65 m/min - Printing speed: up to 50 m/min Jupiter digital printing unit (JPT): - Number of colors: 4 - Print heads per color: 8 (max. 10 possible) - Free slots for additional colors: 6 - Print head type: XAAR 2001 Printing unit with DLE structure: Hjdpfx Aiozuzfzorjw - Printing rows: 1 - Print heads per row: 8 (max. 10 possible) - Free slots for additional rows: 1 - Total print heads: 8 - Print head type: XAAR 1003 Specifications of the raw panel: - Length: 600-2800 mm - Width of the raw board before the longitudinal cutting process: 900-1260 mm - The panels are split in the longitudinal direction before digital printing and coating - Thickness: 2-12 mm (without limitations); up to 28 mm with speed limitation Cutting format saw: - Longitudinal slitting system with up to 5 saw cuts plus 2 trimming units for the production of finished panel widths of 160-510 mm Specifications for finished panels: - Length: 600-2800 mm - Width: 160-510 mm - Thickness: 2-12 mm (without limitations); up to 28 mm with speed limitation Feed system (feed): - Type: Vacuum portal - Feed stations: 2 - Discharge stations: 1 - Maximum feed rate: 8 cycles/min; with double stacking: 16 panels/min - Identical stacks per station: up to a panel length of 1550 mm = 2; =1550 mm = 1 - Maximum stack height: 1050 mm - Maximum stack weight: 5000 kg (combined) - Design: without pits - Type of transport: protective plate or pallet - Protective plate (infeed): Length 800-2800 mm; Width 1000-1260 mm; Thickness 20-30 mm (up to 150 mm for pallets); max. 80 kg per panel/pallet Stacking system (outfeed): - Type: Drop shaft - Stack positions: 1 - Maximum stacking rate: 30 cycles/min - Identical stacks per position: up to a panel length of 1550 mm = 2; =1550 mm = 1 - Maximum stack height: 1050 mm (alternatively: 1000 mm) - Maximum stack weight: 5000 kg (combined) / Alternative stack configuration maximum stack weight: 3500 kg - Design: with pits - Type of transport: protective plate or pallet - Type of protective plate feed: loading by forklift, separation by robot - Protective plate (stacking): Length 800-2800 mm; Width 1000-1200 mm; Thickness 20-30 mm; max 80 kg per panel; Material OSB or HDF Units: - Number of units: 35 - Process steps: Feed, cutting, cleaning, infrared heating, UV curing, coating, digital printing, structuring, excimer matting, stacking Application: - Industrial single-pass digital printing line for the high-speed surface finishing of large panels (flooring and furniture), which creates realistic wood, stone, or custom decors directly onto substrates. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2001, - RBO vacuum feeder – Tornado SC 1300 - HEESEMANN MFA 8 (transverse-longitudinal-longitudinal brushes) - HEESEMANN – Dust removal machine - Plus additional dust removal - BÜRKLE SLC 1400 – Roller coating machine - Spreading brush machine with air nozzles from above Hedpfxszuzg Eo Airsw - BÜRKLE SLC 1400 – Roller coating machine - Spreading brush machine with air nozzles from above - HACKEMACK slit nozzle dryer - RBO – Vacuum stacker Oil application line Year of construction: 2001 Oil application line consisting of: RBO vacuum feeder – Tornado SC 1300 HEESEMANN MFA 8 (transverse-longitudinal-longitudinal brushes) HEESEMANN – Dust removal machine Plus additional dust removal BÜRKLE SLC 1400 – Roller coating machine Spreading brush machine with air nozzles from above BÜRKLE SLC 1400 – Roller coating machine Spreading brush machine with air nozzles from above HACKEMACK slit nozzle dryer RBO – Vacuum stacker with new Siemens control system in 2024 Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, used dividing system used dividing system consisting of: infeed system Manufacturer: Systraplan Year of manufacture: 1989 Technical data - Siemens S5 control system - Portal infeed system with suction crossbeam - 1 stacking station - 2 stacking stations for collecting protective sheets - Buffer roller conveyor before the infeed system - 1 additional buffer station Dividing saw Manufacturer: Anthon Type: LNB-LNB150 63/33 22 Year of manufacture: 1994 Technical data - Siemens S5 control system - Package height: max. 150 mm - Saw carriage with scoring saw and main saw Paternoster with 2 levels Type: MRB-HUBKORB-EHK-3 Technical data - For collecting identical packs of strips for optimal utilization of the cross-cut saw Destacking Liftomat Manufacturer: Holzma Type: HAU A 25/8, HAU B 25/8, HAU A 25/12, HAU B 25/12 Year of manufacture: 2004 Technical data - 4 storage spaces with roller conveyor lifting station (Liftomat) - Pit required - Buffer roller conveyor after destacking Waste disposal system consisting of a cut-off machine and a shredder Cut-off machine Manufacturer: Holzma Type: Cut-off machine Year of manufacture: 1996 Shredder Manufacturer: Masur Type: LZ 800 Year of manufacture: 2003 Hsdpfezuzigjx Airjw Technical data - Cut-off machine for longitudinal sections - Conveyor belts and consolidation of longitudinal and cross-cut sections - Horizontal shredder Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1996, Continuous press Manufacturer: OTT Type: 300-K-D0 Year of manufacture: 1996 Technical data Plate dimensions: 2550 x 1350 mm Hot water heating 6 pressure cylinders Hodszuzwwspfx Airow Total pressing force: 135 t Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Year of construction: 2013, condition: used, Membrane press table Manufacturer: Columbus Type: Vacuum forming Year of manufacture: 2013 Technical data Hjdjzuz Ehjpfx Airow - Working area: 1980 x 1350 - Must be connected to an external vacuum pump Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Dust extraction system Manufacturer: Spänex Type: Year of manufacture: Technical data Note: Hsdpfozu Alpsx Airow The technical data and descriptions are copies of the original order confirmation from that time. The information is provided for informational purposes only and is not binding.

Year of construction: 2018, condition: used, Compressor system Manufacturer: Atlas Copco Hodpfx Aszu Al Asirow Type: GA15VSD+FF Year of manufacture: 2018 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, KRÜSI chalet building machine / log house production line type CM 40 Year of construction 2002 Krüsi CM40, consisting of the following components: Circular saw ( cross-cut saw ) Horizontal and vertical log house router Groove milling machine (horizontal) boring mill Infeed table 6m Outfeed table 6 m KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE-marked Ie Dkovfv Tfjk Ddfetk Condition: good, technically checked and cleaned / ready for use Functional principle Processing of wood for chalet construction / log house construction The beams can be processed in a single operation - Cutting to length - Horizontal and vertical milling of necks / grooves in one clamping operation - Drilling - Milling the face grooves Workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for maximum machining accuracy. Slide guidance with dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for use, with contactor control, motors protected by thermal relay. Electrical equipment for voltage 380 V, 50 Hz, with protective covers, Central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed, electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely variable. Fully wired and installed, including air maintenance unit. Patches with a thickness of more than 14 cm must be processed in two tensions. Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analog dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide-tipped with cutting depth limiter (synchronous operation) Adjustable riving knife Motor speed min. 1 / 2900 Power kW 2.2 2nd CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal trimming unit Milling cutter Ø 180mm Milling cutter width max.130mm From cutter width 60 mm only use aluminum alloy cutters with reversible cutting edges 2 hydropneumatic feed motors kW 2.2 each Hydropneumatic feed Rapid traverse and work feed infinitely adjustable 3rd drilling unit: Manual feed Spindle adjustment with analog dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1.8 Hodpfx Aszvrf Ieirsw 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Cutter Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3.0 2 V-belts SPZ 9.5x1000 La Pneumatic Operating pressure on site min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Year of construction: 2019, condition: used, functionality: fully functional, overall weight: 5,425 kg, machine/vehicle number: 3037, Scodix Ultra 202 – Refurbished Counter reading: Foil copies: 1,731,153 Total copies: 3,459,082 Specifications: Power supply: 400 VAC, 3P+N+PE; 63A x3; 50/60 Hz; SCCR: 10kA Made in Israel Year of manufacture: 12/2019 Weight: 5,425 kg Dimensions: 7880 x 1790 x 1979 mm Foil roll width: 50-500 mm Maximum foil roll diameter: 30 cm Number of rolls that can be used simultaneously: 4 Layer thickness: 5 - 250 microns Maximum layer thickness: 700 microns Basis weight: 135-675 g/m² Resolution: 2540 x 450 dpi Maximum format: 545 x 788 mm Minimum format: 297 x 420 mm Hjdez Imi Njpfx Airow Maximum image area: 748 x 504 mm The machine is fully functional. The machine is available in Essen. Transport can be negotiated individually.

Condition: used, CNC machining center Manufacturer: SCM Type: Morbidelli Author 430S Year of manufacture: 2006 Hsdpfx Aijz Inkbjrsw Technical data - Working area: 1300x3600x180 mm - Equipped with milling spindle, drilling unit, and saw - Horizontal machining units - Original SCM software - The machine is in good working condition. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Year of construction: 2025, For sale: brand new / unused ZEISS Primovert inverted phase contrast microscope, supplied as a complete factory-configured kit in the original ZEISS packaging. This is one of 5 identical new Primovert units available. The complete configuration includes: ZEISS Primovert microscope stand, ref. 415510-1100-000 - Binocular tube - 4-position objective turret - Specimen stage 200 x 239 mm with metal stage insert - Binocular tube 45°/20 - Eyepieces 10x/20 Br. foc. - External power supply 100-240 VAC / 50-60 Hz - Dust cover - Original accessories and documentation ZEISS LD Condenser 0.4, ref. 415510-1700-000 - Working distance 55 mm - Suitable for objective magnifications of 4x to 40x Objectives included: ZEISS Plan-Achromat 4x/0.10 Ph0 Ref. 415500-1619-000 Working distance 12.0 mm ZEISS Plan-Achromat 10x/0.25 Ph1 Ref. 415500-1605-001 Working distance 4.4 mm ZEISS LD Plan-Achromat 20x/0.30 Ph1 Hjdoz E A Hfopfx Airow Ref. 415500-1614-000 Working distance 4.6 mm at D=1 mm ZEISS LD Plan-Achromat 40x/0.50 Ph1 Ref. 415500-1617-000 Working distance 2.7 mm at D=1 mm Phase contrast components included: Phase annulus Ph 0/0.4, ref. 415510-1810-000 Phase annulus Ph 1/0.4, ref. 415510-1811-000 3-position phase slider, ref. 415510-1805-000 Also included: ZEISS LED illumination for Primovert Ref. 415510-1201-001 Condition: New / unused The microscope is supplied in its original ZEISS box with original protective foam, documentation, and accessories. The unit has not been used in a laboratory setting. 5 identical units available. Available immediately from stock in Belgium. Worldwide shipping available. Please contact us for additional information, pictures, shipping quotation, or a formal offer.

Condition: good (used), functionality: fully functional, 1 x Repositioning Lathe Precision Engineering Hjdpfx Ajzl Dr Esirew PM 1-FZ Equipment: - Hand lever cross slide with Multifix quick-change system design - Electric tailstock for drilling and threading - Collet chuck with draw-in collets Technical Data: - Spindle bore: 23 mm - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Distance between centers: 160 mm - Largest swing over bed: 220 mm Accessories: 20 x Draw-in collets 359 E K 23 (1 - 20 mm, increasing in 1 mm increments) 1 x Draw-in collet in tailstock 319 E K 12 1 x Multifix type tool holder with 1 cassette Operating manual (copy) Additional accessories, such as collets, are available at an extra charge. The machine can be inspected while powered on.

Condition: ready for operation (used), Year of construction: 2009, CNC router manufactured in 2009. This MECANUMERIC Pro 3015 has been very lightly used, with a total operating time of just 1,369 hours. The machine is in very good mechanical condition, although the spindle bearings will need replacement. It is currently connected to power and can be tested until approximately the end of September 2026. If you are looking to get high-quality routing capabilities, consider the MECANUMERIC Pro 3015 machine we have for sale. Contact us for further details. • Usage: very lightly used • Total operating hours: 1,369 h • Mechanical condition: very good • Maintenance note: spindle bearings need to be replaced • Power/test status: currently connected to power and can be tested Hodpfxsz Arwke Airow • Testing availability: testing expected to be possible until approximately end of September 2026

Condition: as good as new (ex-display), Year of construction: 2026, OTT Pacific+ with special paint finish Equipment: Riepe transmission Gluing, laminating (PUR/EVA), pressure zone, edge trimming for increased edge overhang Capping with 2 motors, flush trimming at the top/bottom, radius trimming R2, corner copying AKF fully equipped with optional multi-tool, NC radius draw blade R2/R1, surface draw blades 2-point, RS special unit with Riepe spray nozzles. Suitable for solid wood up to 15mm thick Feed rate from the roll: 18 m/min, including profile milling Hodpfx Aiez D Uwmorow Machine weight approx. 3000 kg Return possible.

Condition: used, High Speed Elevating Rail Vertical Boring Machine with Power Indexing Turret & Copying Attachment. Four Jaw Chuck Size 48" Diameter. Table Swing 60" Diameter. Hodpfx Aszy Ik Ieirsw Max Height Under Cross Slide 60" Turret Rise & Fall 36" Speeds 10.5 - 234 rpm With 4 Sets of Chuck Jaws, Equipment, Chuck Guards & Newall Digital Readout System.

Condition: excellent (used), Thickness planer and jointer, 350 mm width Router Blade diameter: 300 mm Miter saw with 3000 mm carriage Spindle molder, spindle diameter 35 mm Drilling machine Hedpeziuviofx Airjw 400 V

Year of construction: 2017, condition: used, Used Machine Year of Manufacture: 2017 Features and Technical Specifications: Automatic cutting plotter with vacuum sectors on the work surface Automatic cutting table with automatic detection of print images and reference points The work surface consists of 40 individual vacuum sectors that are automatically activated as needed Multi-tool cutting head for cutting, scoring, and milling materials up to 50 mm thick Multi-batch cutting capable, allowing different substrates to be cut simultaneously Hedpfezlbqlsx Airsw Automatic tool presetting Video projection system for optimizing material yield Cutting speed up to 102 m/min, acceleration 1.4 G Automatic substrate height detection Working area 3100 x 2000 mm Suction sectors in the working area: 40 Cutting speed up to 102 m/min Tooling program: Scoring tool, oscillating blade, router Elitron CAD

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Hjdpfoxddvnjx Airjw Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Year of construction: 2024, condition: like new (used), Flatbed cutter with conveyor, Jwei CB03II-2516-RM. The machine was used solely in a showroom for demonstration purposes. It is in like-new condition. The cutter can be sold with or without the 350 W router option. Configuration: - Jwei CB03II-2516-RM; - CCD camera; - Oscillating cutting tool (EOT); - Non-oscillating cutting tool; - Kiss-cutting tool; - V-cut tool; - 350W Router tool (optional); - Creasing wheel tool, set of 4 wheels; - Software with computer and monitor; Main technical data: Functions: cutting, kiss-cutting, creasing, milling (optional) Hedpjy Tw Sdofx Airsw Cutting area: 2500x1600 mm; Cutting thickness: 50 mm; Cutting speed: up to 1200 mm/s Dimensions: 3650x2620x1280 mm.

Condition: new, Year of construction: 2026, functionality: fully functional, /// Overview The NB7X is a high-performance automatic edge banding machine designed for handle-free cabinet door production. It switches easily between half bevel (45°) and full straight edge modes, and features twin diamond cutters, a twin glue station, and a twin tape coil magazine. Suitable for panels from 9 to 50 mm thick (straight) and 15–25 mm (half bevel), it is an excellent solution for modern, handleless furniture manufacturing. /// Key Features Bevel edge milling — Two 4 kW high-power motors at 2,800 rpm with 45° diamond forming bevel cutters for precise, crack-free milling. Pre-milling — Dual Leitz diamond cutters (2× 3.7 kW, 9,000 rpm) rework imperfections from panel saw cutting for superior edge adhesion. Hedpfxey Sk T Ee Airjw Twin glue system — Separate gluing units for straight and 45° bevel edges; Teflon-coated EVA glue pot (~5 L) plus optional auto glue pumping with a 25 kg basin. Pre-heating — Warms the panel edge before gluing, ideal for cold or humid environments. Tape handling — Separate tape brackets for full straight and half bevel modes, with an edge tape grooving device for cleaner folding on thicker tapes. End, rough, fine & corner trimming — Full set of trimming stations with high-speed motors and copy-tracing structures to protect hinge holes. Scraping & buffing — Flat and profile scraping removes excess glue; dual-cloth buffing delivers a polished, shiny finish. Top presser — Aluminum beam with auto height adjustment based on workpiece thickness; compact wearproof rubber rollers prevent displacement during conveying. Safety — Feeding protector, workpiece thickness detection, interval feeding detection, and emergency stop. Control — 10″ touch screen with PLC control (380V/50Hz), energy-saving standby mode, and remote switch. Available in English, Simplified Chinese, and Traditional Chinese. /// Machine Construction The heavy-duty welded steel body undergoes heat treatment, vibration aging treatment, sandblasting, and CNC finishing for long-term dimensional stability. All machines are assembled by experienced technicians following strict SOPs and delivered with a Quality Certificate signed by a QC specialist.

Condition: refurbished (used), Year of construction: 2026, We thoroughly refurbish all machines that arrive in our warehouse, ensuring that our customers receive devices that are virtually like new with almost zero print count. Each machine is carefully inspected, cleaned, and restored so that it performs reliably and also looks excellent. The refurbishment process Complete disassembly: Every machine is fully taken apart down to the frame, allowing each component to be individually inspected and serviced. Hjdpfxoy R D Hps Airsw Deep cleaning: We clean each device in great detail, removing all dust, dirt, and residues from even the smallest parts. Consumables refurbishment: All consumables and wear parts are refurbished regardless of their condition to ensure long-term reliability. Housing replacement: Scratched, broken, or discolored casing elements are replaced with parts in excellent condition. Secure packaging: Finally, the machines are wrapped in protective film and shipped in boxes to ensure they arrive safely and without damage. By the end of the process, the machine is restored to a condition that is as close to new as possible, both in appearance and performance.

Year of construction: 2025, condition: used, M.S.K. / Tryma OMRM 133 Sawing Machine + TM-127 Copying Router (Set of 2 machines, 2025) We offer this complete set of two virtually new machines for processing aluminum and PVC profiles (Year of manufacture: 2025). The machines can be purchased together as a set or individually. Hedpfxoy Encwe Airow 1. M.S.K. / Tryma OMRM 133 (TM-133) Automatic 2-Head Sawing Machine - Asking price for individual sale: €31,500 excl. VAT (New value: €37,420 excl. VAT) - Specifications: Year of manufacture: 2025 | Serial number: 25DCM330004 | Power: 6.5 kW | 400 V (50 Hz) | 1220 kg - Suitable for quickly and accurately sawing PVC and aluminum profiles - Equipped with 2 saw blades, diameter 550 mm - Console with industrial PC and integrated label printer - Automatic opening and closing of the safety guards - Horizontal and vertical pneumatic profile clamping - Fixed left head and automatically adjustable right head with roller conveyor - Servo motor guarantees fast movement and precision via linear guides - Pneumatic tilting of heads (90° / 45° inward) + mechanical adjustment for intermediate angles - Sawing length max. 5,000 mm (overlengths up to 7,500 mm possible, min. length 290 mm) - Including central support for support and dust extraction option 2. Tryma TM-127 Manual Copying Router Machine (3 spindles) - Asking price for individual sale: €9,500 excl. VAT (New value: €11,330 excl. VAT) - For quickly and easily routing PVC and aluminum profiles - 3-sided processing without reclamping (1 vertical and 2 horizontal copying heads) - Horizontal and vertical templates with standard operations - Automatic locking of cutting depth via pneumatic clamps - Horizontal and vertical pneumatic pins (4, 6 and 8 mm) - Smooth movement via recirculating ball bearings, shock absorbers and ergonomic handle - Including roller conveyors of 1,500 mm (left and right) and pneumatic cooling spray - Profile height: min. 40 mm / max. 110 mm | Profile width: max. 150 mm If you have any questions, are interested in the complete set or an individual machine, please feel free to send us a message or call us.

Condition: used, Year of construction: 1955, Technical details: turning diameter over bed: 420 mm turning diameter over support: 240 mm turning length: 1100 mm turning dia. in gap: 600 mm range of revolution per miute: 24 - 900 / 8 step U/min spindle bore: 41 mm range of feed in x - axis: 0,0120 - 0,1000 mm/U range of feed in y - axis: 0,0062 - 0,0302 mm/U tailstock quill taper MT: 3 tailstock quill adjustment: 220 mm total power requirement: ca. 4,0 (ohne Gewähr) kW weight of the machine ca.: 1,2 t dimension machine xH: 2,3 x 0,9 x 1,3 m Equipment: 3-jaw chuck Ø 200mm Hodpfx Aeu Ix D Ajirjw Tool holder 4-way, swivelling 30° right/left T-slot for copying device Driving disc *

Condition: used, functionality: fully functional, Alberti Format 90 CNC machining centre for sale! Technical specification Working area 3000 x 1250 mm Max. panel thickness 50 mm Max. programmable speed axis X 40m/min, axis Y 40 m/min, axis Z 9m/min Spindles motor power n.2-2 HP - 3000 rpm 27 vertical independent spindles on 32 mm centers Possibility to mount 4 router with cono morse Router speed and power outpust 18000 rpm Possibility to mount 1 saw Saw speed and power output 12000 rpm Operating pressure 6 bar Hedpox Ey Sdsfx Airow Total weight 4450 kg Dimensions incl. electr. cabinet 5800 x 3450 x 1950 mm