Used Copying Lathe for sale (5,910)

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, woodturning lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Several programs for turning and milling operations can be stored. Hydraulic copying of a pattern or template. The roughing and copying tools are equipped with fine adjustments. Gedpfx Akjzfwm Noaokb Template adjustment is possible from the front and rear via fine-pitch spindles. The copying length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via V-belt, within each stage, operation can be continuously adjusted via a frequency inverter. Speed stage 1: 200 - 2000 rpm Speed stage 2: 350 - 3400 rpm Distance between centers approx. 1550mm Copying length with steady rest approx. 1350mm Bed length approx. 2100mm Feed adjustable continuously, rapid traverse with safety end stop. Hydraulic copying slide with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release mechanism. Extensive accessories: Ring steady rest with front turning tool and insert guide. Four-jaw steady rest. Four-jaw chuck 125mm. Copying tools, center points, hexagonal drive, etc. Milling unit with 3kW motor for mounting on the copying slide. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots have been touched up. Very good condition, from a small carpentry workshop. The machine was apparently not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300mm (L x W x H). Weight approx. 800kg. The machine can be demonstrated on-site upon prior appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider."

Condition: excellent (used), CATALOGUE NUMBER: 6901 TECHNICAL DATA - Max. turning length: 1200 mm - Max. turning diameter: 210 mm - Max. turning diameter with standard support: 90 mm - Max. dimension of square material for turning with automatic feed: 100 mm - 3 hydraulic copying units Gkjdpjzu R S Rofx Akajb - Additional 3 cutting tools on hydraulic pistons (2 installed) - 4 types of spindle rotation - Automatic or manual machine operation - Spindle motor: 9 kW - Hydraulic pump motor: 3 kW - Diameter of extraction nozzle: 90 mm - Dimensions for transport (L/W/H): 3700x2100x2000 mm - Weight: approximately 3000 kg ADVANTAGES - Made in Italy - Automatic hydraulic copying unit - Original DTR documentation - Unpainted - Used lathe, very good condition Net price: 57,900 PLN Net price: 13,786 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: used, CATALOGUE NUMBER 7650 Technical data: - max. working length 1500mm - max. working diameter 250mm - milling (disc milling cutter) 7.5kW - spindle – 2800 rpm, 3kW - spindle speed 700/1200/1500/2000 rpm - grinding unit 0.75kW - hydraulic motor 3kW - total power 17.75kW - air consumption 6-8 bar - infeed conveyor for workpieces up to 150x150mm - diameter of dust extraction nozzle 100mm, 160mm - dimensions for transport (length/width/height) 4350x2300x1980mm - weight approximately 3000kg ADVANTAGES - made in Germany - automatic hydraulic copying system - original DTR documentation - unpainted - used lathe, very good condition Gkedpfoztrfcsx Akaob Net price: 59900 PLN Net price: 14262 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: used, Second-hand HAPFO AP 5000/ME copy lathe for professional use in woodworking. The machine is designed for copy turning of workpieces and is suitable for typical turning and shaping work on wood. Technical data: - Centre-to-centre distance: 1,300 mm Gkedpfx Akozrx Saeajb - Centre height: 250 mm - Motor: 1.4 kW

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection Gsdpfszd Uv Eox Akajkb CE safety equipment

Condition: used, machine/vehicle number: 19013, Combined copying milling machine - lathe MICHÄL KÄMPF Online-Video-Inspection by Skype-Video Gkedpfsh Axryjx Akasb We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), functionality: fully functional, AUTOMATIC VERTICAL COPY LATHE model GENINI GS 120 second hand 3 spindles + copy Godpfeyl Iufex Akaekb automatic movement of carriage feeding speed of carriage is regulable quick reverse of carriage automatic movement of tools unit pneumatic press distance between spindles mm.160 max. length to work 1200 tools motor power Hp 4 volt. 380/50

Year of construction: 1989, condition: excellent (used), Hydraulic copy lathe for wood Automatic cycle turning system with one programmable copier for one or two passes Hydraulic copying unit with touch probe Maximum distance between centers mm 1300 Maximum diameter mm 250 Tailstock sleeve diameter mm 60 Stroke of the tailstock sleeve mm 100 Carriage feed speed mt/min 0/6 Trolley return speed mt/min 7.33 Spindle speed rpm 900/1500/1800/2250/3000/4500 Gkodpfom Tz Tujx Akasb

Condition: used, Turret lathe, lathe with copying device, UMA Type F1 NK 60 Copying lathe for chucked workpieces Machine No. 28-0031, Year of manufacture 1971 Turning diameter max. 150 mm Swing diameter over bed 400 mm Turning length approx. 200 mm Spindle bore in the machine spindle approx. 42 mm Spindle speed 580 - 930 - 1480 - 2380 rpm, 4 steps Main motor power 5.5 kW Power connection 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gear stages - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying device SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system installed under the machine bed Gksdpfx Ajib D H Rokaob - Hydraulic unit located behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement for turret lathe with hydraulic unit L x W x H 2900 x 1900 x 1700 mm Space requirement for turret lathe L x W x H 2400 x 1900 x 1500 mm Space requirement for hydraulic unit L x W x H 1400 x 850 x 1700 mm Weight of turret lathe 2400 kg Weight of hydraulic unit 400 kg Total weight with pallet 3000 kg Good condition

Condition: new, machine/vehicle number: 7-CL1200, The new CL 1200 commercial copy lathe from Holzprofi is characterized by its extreme stability and ease of use. 100% Made in EU (developed, built, quality-tested) Standard equipment: Drill chuck ø 16 mm, mandrel MK2 with external taper ø 16 mm, Live center punch ø 20 mm, Live center punch ø 40 mm, Four-prong driver ø 20 mm, Four-prong driver ø 40 mm, bung chuck ø 40 mm, Clamping disk ø 200 mm, copy chisel 16x16 mm, Hand rest, protective screen, clamping lever, ejector, Drill holder (for longitudinal milling of grooves). incl. fixed steady rest Technical data: Center width 1200 mm Center height 215 mm Spindle thread M33 DIN800 Spindle taper MK2 Tailstock taper MK2 Quill travel 140 mm Gkodpfxovw Eaxs Akaob Drill chuck 16 mm Spindle speeds 500/1000/2000/2800 Motor output S6 1.5 kW (1.1 kW S1) Weight 395 kg Optional accessories: Traveling steady rest Stepless speed control

Condition: used, Heavy-duty wood lathe with hand copy attachment, sold by private owner with extensive accessories, fully equipped, some items in original packaging. Used, excellent condition, low operating hours. Make: Flott-Arnz. Centre distance approx. 1200 mm, centre height approx. 250 mm. Hand copying device with approx. 1000 mm copy length. Four-prong drive centre, live centre included. 5 spindle speeds: 500 - 2500 rpm. Location: 97447 Gerolzhofen, loaded on truck, unpacked. Sale as inspected, in current condition, without any warranty or guarantee. Gedpfeyb S Hkex Akaokb

Condition: new, functionality: fully functional, turning diameter: 370 mm, Device for copying original parts or according to a template Stepless spindle speed control enables optimal adjustment to the workpiece High spindle rotational accuracy Robust cast iron construction ensures vibration-free operation High-quality belt drive provides optimal power transmission to the spindle Quick-action lever enables easy locking of the tailstock on the bed Digital spindle speed display included in the delivery scope Technical Specifications Centre distance: 1100 mm Swing over bed: 370 mm Copying turning diameter*: 160 mm Spindle speed min.: 500 rpm Spindle speed max.: 2000 rpm Number of speed ranges: stepless Spindle thread: M33x3.5 Tailstock taper: MK 2 Tailstock quill travel: 50 mm Copying length: 850 mm Motor power: 1.1 kW Motor power S1 100%: 0.75 kW Voltage: 400 V Dimensions - width: 1650 mm Dimensions - depth: 750 mm Dimensions - height: 1150 mm Weight approx.: 92 kg Scope of delivery Gkedpfxeytc R Ro Akaob 300 mm tool rest 150 mm faceplate Rotating live centre Drive centre Copying device Basic tools Base

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1230x490x2120 mm Weight 200 kg Gkjdpovz Hmhjfx Akaeb Total power requirement 1,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3750x1400x1750 mm Weight 1600 kg Total power requirement 8 kw Gkjdpfxjv A Huhs Akaob

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2700x1400x1750 mm Weight 1800 kg Total power requirement 5 kw Gsdpfxov A Ht Ds Akaokb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2150x480x1330 mm Gkjdpfx Aovz Em Tokaeb Weight 220 kg Total power requirement 1,6 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2150x480x1330 mm Weight 230 kg Total power requirement 1,6 kw Gksdpfx Akjvz Eu Rjajb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2150x480x1330 mm Weight 220 kg Total power requirement 1,6 kw Gksdpfx Ajvz Ep Ijkajb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2150x480x1330 mm Weight 230 kg Total power requirement 1,6 kw Gksdpfx Akevz Hi Njaeb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1230x490x2120 mm Gsdpfovz Hpcsx Akaokb Weight 200 kg Total power requirement 1,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2700x1400x16502 mm Weight 1800 kg Total power requirement 8 kw Gkodpsv A Ht Rjfx Akaeb

Condition: used, Hydraulic Copying Device SAUTER Type KMC 8001 Copy turning attachment, copying device for lathes The copying device comes from a lathe. Connections for oil supply and oil return Copy stroke: approx. 140 mm Radial travel at 60° mounting: 120 mm Required operating pressure: approx. 25 bar Oil flow rate: max. 7 liters/min. Lathe drive power: max. approx. 15 kW Godjxxmf Iepfx Akaokb Chip cross-section: max. 3.5 mm² Copying slide stroke: approx. 125 mm Distance from turning tool to tracer: 800 mm Net weight of copying device: 120 kg Good condition The matching hydraulic power unit and holders for the pattern parts can be found on our website under the search term 'Sauter'.

Condition: excellent (used), Year of construction: 2005, The JAROMA DT-3 copy-turning and milling machine is a professional, cast iron woodworking machine with a copy device, designed for serial production of round, polygonal, and helical components. It uses turning knives or milling cutters (disc/finger) for profile machining based on a template, ensuring high shape repeatability.Main features and specifications:Application: Serial production of parts such as chair legs, balusters, and handles.Construction: Stable cast iron bed.Motor power: 2.2 kW.Dimensions: approx. 225 x 80 x 140 cm.Weight: approx. 300 kg. Gedpfxey Sg Dto Akaokb

Condition: used, SECOND-HAND HORIZONTAL COPYING LATHE WITH 4 SPINDLES BACCI - Spindles distance 180 MM - With cabin Gjdpswr Uknefx Akaskb

Condition: used, Year of construction: 1994, functionality: fully functional, turning diameter: 170 mm, SECOND-HAND COPYING LATHE WITH 4 SPINDLES BACCI TYPE T4MO - Max turning diameter 170 mm - Max working length 1000 mm Gkedpfx Ajx Rw Iyjkaob - Longitudinal sanding unit - Nr. 4 spindle - Year 1994