Used Copy Setup for sale (1,622)

Condition: good (used), Year of construction: 1978, Machine overhauled and ready for use including accessories Itjdpfx Aaehzt Npsbjn

Condition: used, Year of construction: 1986, used, top condition cleaned, function checked, test run, manufactured by Hapfo type AP 1000 built in 1986 mach.-No. 44 top width ca.1000 mm top height ca. 200 mm 6-Zackmitnehmer Itsdjvwf D Dopfx Aabjn live centre motor 0.75 PS revs 750 - 1500 - 3000 required space ca. l x w x h mm 1600 x 600 x 1400 located in 97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: not inspected (used), power: 2.2 kW (2.99 HP), Projection 650 mm Speeds 12000/18000 rpm. Table 750 x 750 mm Table extension left Iedsq U Ih Dspfx Aabotn

Condition: ready for operation (used), Punching force: max. 20 to stroke length: 16 mm strokes: 200, 300, 400, 600 1/min motor power: 4kW working ranges: transverse (x-direction) 1.000mm longitudinal (y-direction) 500mm working area max. 500 x 1.000mm table area: 875 x 1.600mm (without outrigger) Iodpfxoiknyhs Aabjtn weight: approx. 4.500kg Power: see photo data sheet Big number of stamping units as accesoirs with the machine Machine can still be seen under power at the last working company

Condition: new, - 2 pneumatic clamps - cooling - Material stop - documentation Itsdegg N Taspfx Aaben - 400V

Condition: not inspected (used), Max. working length: 1000 mm Iedpfx Asv Ifqloabetn Max. working width: 180 mm 3 pneumatic clamping cylinders 2 3 kW motors Hydraulic feed

Condition: new, - 2 pneumatic clamps Itjdpou Uii Hjfx Aaben - drilling device - cooling system - Material depot - documentation - 400V

Condition: good (used), used copying unit Copymat, type 1301A2 Itodpfsipibqox Aabon

Condition: used, Copy head, copy head, copy device, copy lathe -Copy head for: lathe -with: hydraulic unit Isdpfx Asdv N Iysabjtn -Transport dimensions: 1200/800/H650 mm -Weight: 216 kg

Condition: used, Copy head, copy head, copy device, copy lathe -Copy head for: lathe Iodpfx Aodl Smhsabotn -without: hydraulic unit -Dimensions: 1100/170/H370 mm -Weight: 143 kg

Condition: used, Druckplattenbelichter - Plate Exposer O.M.S. COPYSTAR 4050 Serial-No. 93-2023 Format / Size max. 400 x 500mm Voltage 230V AC - 2800W Itodpsv Am Rvsfx Aaben Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2750x1800x2200 mm Itodpfxevz Epnj Aabsn Weight 2500 kg Total power requirement 11 kw

Condition: excellent (used), CATALOGUE NUMBER 6901 TECHNICAL DATA - max. turning length 1200mm - max. turning diameter 210mm - max. turning diameter with standard steady rest 90mm - max. size of square material for turning with automatic feeding 100mm - 3 hydraulic copiers - additional 3 knives on hydraulic pistons (2 pieces installed) - 4 types of spindle speeds - automatic or manual machine operation - 9kW headstock spindle motor - 3kW hydraulic pump motor - diameter of the exhaust port 90mm - dimensions for transport length/width/height 3700x2100x2000mm - weight approx. 3000kg ADVANTAGES - Italian production - automatic hydraulic copier - original DTR documentation - unpainted - used lathe, condition very good Net price: PLN 63,900 Net price: EUR 15,040 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of larger exchange rate fluctuations the price may change) Itedpfokqui Rsx Aabon

Condition: used, SECOND-HAND HORIZONTAL COPYING LATHE WITH 4 SPINDLES BACCI - Spindles distance 180 MM Itjdpfowr Uknox Aabsn - With cabin

Condition: good (used), Year of construction: 1990, functionality: fully functional, Commissioning: 1992 Control system: Fidia CNC 11 Spindle Ø: 130 mm Spindle speed: 80 - 3150 rpm Max. Milling power: 30 kW Spindle bore: SK 50 Quill stroke: 200 mm Swivel capability: + / - 45° Itedpfx Aasrrf Rxsbsn Travel: X-2400 mm Y: 1250 mm Z-1000 mm Feed range: 5 - 3000 mm/min Rapid traverse: 6 m/min Clamping surface: 3000 x 1250 mm Max. Table load: 10 to Total power requirement: 55 kW Space requirement: approx. 8500 x 5500 x 4500 mm Weight: approx. 47 tons Still under power.

Year of construction: 1994, condition: used, Used machine Year of manufacture: 1994 Condition: age-appropriate Equipment and technical data: Edging thickness max. 8 mm Workpiece thickness max. 60 mm Workpiece width min. 90 mm Operation via foot pedal Incl. extendable workpiece support Incl. chassis Incl. buffing unit Isdpfxew I Urve Aabotn Dimensions: approx. 700 x 600 x 1300 mm Weight: approx. 140 kg Suction nozzle: 70mm Availability: short term Location: Flörsheim

Condition: like new (used), - machine in stock - after a technical review - very good condition - ideal for the production of chairs   Itjdpfsd Dc E Aox Aabjn TECHNICAL PARAMETERS: - 7.5 kW main engine - two dugouts - pneumatic derrick control - pneumatic digging - wheel diameter 850 mm - 40 mm tape width - maximum length of the element 1300 mm - maximum width of the element 800 mm - maximum height 120 mm - two pneumatic side clamps - two pneumatic working distances - continuous feed regulation - hydraulic feed - 1.85 kW pump motor - receiving conveyor 180 mm x 2000 mm - 0.25 kW belt conveyor - central lubrication   Machine dimensions: - length 400 cm - 230 cm wide - height 250 cm - weight ~ 2000 kg

Condition: used, Hydraulic Copying Device SAUTER Type KMC 8001 Copying Turning Device, Copying Turning Device for Lathes The copying device comes from a lathe. Connections for oil supply and return Copying stroke: approx. 140 mm Isdpfx Aeh Ep Najabjtn Radial travel at 60° angle: 120 mm Required operating pressure: approx. 25 bar Oil flow rate: max. 7 liters/min. Lathe drive power: max. approx. 15 kW Chip cross-section: max. 3.5 mm² Copying slide stroke: approx. 125 mm Distance from turning tool to probe: 800 mm Weight of copying device: approx. 100 kg Good condition The matching hydraulic unit and the holders for the sample parts can be found on our website under the search term "Sauter"

Condition: excellent (used), CATALOG NUMBER 7650 Technical data: - max working length 1500mm - max working diameter 250mm - milling (disc cutter) 7.5kW Itodpfewk Hbpjx Aabsn - spindle – 2800rpm 3kW - spindle speed 700/1200/1500/2000rpm - grinding unit 0.75kW - hydraulic motor 3kW - total power 17.75kW - air requirement 6-8bar - feeder for square timber up to 150x150mm - diameter of the exhaust nozzle 100mm, 160mm - dimensions for transport L/W/H 4350x2300x1980mm - weight approx. 3000kg ADVANTAGES - German production - automatic copier hydraulic - original DTR documentation - unpainted - used lathe, very good condition Net price: PLN 69,900 Net price: EUR 16,440 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Year of construction: 1997, condition: used, SECOND-HAND COPYING CAROUSEL CAMAM GC6/4F-4L - 2+2 milling units (roughing and finishing) Ijdpfx Aashz Dlbsbetn - 2+2 sanding units (roughing and finishing) - pneumatic locking cylinders - n.6 working stations - with cabin - Control panel - volt. 380/50 - S/N 73 - CE rules (year 1997)

Condition: used, Year of construction: 1995, machine/vehicle number: 1/95, SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/4F/1L - Double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit Ijdpeqmnidefx Aabjtn - 1 ouside milling unti - 1 outside sanding unit - 4 sides cabin with roof - Kw 28 - Year 1995

Year of construction: 2000, condition: used, SECOND-HAND LINEAR COPYING SHAPER BACCI MOD. FC8 2500 - unit 1-2: milling units - unit 3-4 milling units - unit 5-6: sanding units - unit 7-8: sanding units - working height mm. 180 - max. working length mm. 2500 - 8 locking cylinders - cabin Itedpfx Ajikz Rfjabsn - S/N 1481 - CE year 2000

Condition: used, Year of construction: 2002, SECOND-HAND COPYING BAND SAW MZ MOD. UNIVERSAL 013 - CE RULES - Motor Hp 7,5 - Wheel diam. 840 mm. - Copying device - Max cutting length 1300 mm - Max cutting height 100 mm - Cutting angle +- 45° - Waste conveyor belt SMA - S/N 08 - Year 2002 Ijdpfx Asmzbl Tjabstn

Year of construction: 1998, condition: used, SECOND-HAND CNC CONTROL COPYING BAND SAW MZ UNIDUE 013 - NUM control - n. 3 cnc axis Itodpfx Aeimwtroabsn - cutting section 1300x800 h 100 mm - angle of cut 90°+/- - wheels diameter 900 mm - volt. 380/50 - s/n 06 - CE rules (year 1998)

Condition: used, Year of construction: 2014, SECOND-HAND COPYING BAND SAW CNC CONTROL MZ UNIVERSAL 013 - CE RULES - The CNC universal is designed to handle any type of wood: solid wood boards with defects, laminated panels or other similar materials. - Versatility is the main feature of these machines which stand out for the possibility of operating in manual, semi-automatic or fully automatic cycle. - CNC bandsaw with blade twisting +/-90° - Roller clamp to keep and position the wood - Manual, semi-automatic, automatic cutting cycles - Easy to program and use - Motor Hp 7,5 - Wheel diam. 900 mm - FANUC CNC control - CE rules Itjdpfxowr Ek Ss Aabon - Year 2014