Used Corner Rounder for sale (2,402)

Condition: used, Year of construction: 2002, Machine is in good condition and can be inspected in operation upon appointment. Hedpfx Aioyx D Ays Dsnl Availability: 06/2026 Full technical specifications in the attached document. Please note: 5 extra machines are available (ARBURG Allrounder 420C 1000-250) Contact us for more information. Clamping force: 1000 kN Opening force: 35/250 kN Opening stroke: 500 mm Mould installation height (min): 250 mm Distance between platens (max): 750 mm Ejector force: 40 kN Ejector stroke: 175 mm Injection pressure: 2470 / 1820 / 1390 bar Screw diameter: 30 / 35 / 40 mm

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling Hnodpsyxdwdsfx Ai Del • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: used, Year of construction: 2008, screw size 18 mm closing pressure 250 kN opening stroke max. 350 mm mould space 200 mm control Selogica Number of working hours 52.492 h ARBURG ALLROUNDER 270 S 250-70 – Injection Molding Machine – Year ofManufacture: 2008 – Excellent Condition A reliable and proven ARBURG ALLROUNDER 270 S 250-70 injection molding machine, manufactured in 2008, is for sale. The machine is ideal for producing precise plastic parts in small to medium-volume production runs and impresses with its robust construction and the renowned ARBURG quality “Made in Germany.” Technical Highlights: - Clamping force: 250 kN - Injection unit: Size 70 - Screw diameter: approx. 18–25 mm - Injection pressure: up to approx. 2,500 bar - Column spacing: approx. 270 x 270 mm - Platen size: approx. 380 x 380 mm - Connected load: 53 kW Electrical specifications: - Operating voltage: 400 V / 50 Hz - Control voltage: 230 V / 24 V - Total current consumption: 89 A Hjdpoywzv Ijfx Ai Donl Additional information: - Year of manufacture: 2008 - Manufacturer: ARBURG (Germany) - Machine is robust, durable, and easy to maintain - Ideal for technical plastic parts and precision applications Advantages: - Proven SELOGICA control system (standard for this series) - Compact design - High process reliability - Long-term availability of spare parts guaranteed Viewing available by appointment. Additional information, photos, or videos available upon request. - Operating hours: 52,492 hours, 7,085,048 cycles - Centring ring mounts: ø125 mm - Blowing unit fitted

Year of construction: 2000, condition: good (used), functionality: fully functional, machine/vehicle number: MF25-26, Corner Former MF 25-26 – Hydraulic, Year of Manufacture 2000 For sale is a used, robust corner former (Eckenformer) of the type MF 25-26, ideal for precise processing of sheet metal edges and corners in metalworking applications. Technical data: Type: Corner Former MF 25-26 Year of manufacture: 2000 Voltage: 400 V / 50–60 Hz Power: 2.5 kW Hydraulic pressure: 150 bar Tank capacity: 40 liters Weight: approx. 500 kg Manufacturer: ACF Engineering & Automation GmbH, Austria Description: The machine is in used, fully functional condition. It is perfectly suited for industrial sheet metal processing, especially for forming and finishing corners. Thanks to its hydraulic design, it enables consistent and powerful operation. The compact construction and solid build ensure high stability and long-term reliability in production environments. Hedpfx Aiey D A Eke Djnl Key features: - Heavy-duty industrial design - High operating pressure for precise results - Easy integration into existing production lines Condition: used, ready for operation (see photos)

Condition: good (used), Year of construction: 2002, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 570 mm, displacement volume: 427 cm³, injection pressure: 2,080 bar, mold height (min.): 300 mm, Technical Data – Arburg 570C 2000-675 General Information: Year of manufacture: 2002 Control system: Selogica Injection unit: Type: … / 675 Screw diameter: 55 mm Specific injection pressure: 2080 bar Shot volume: 427 cm³ Clamping unit: Hjdjyxnr Sspfx Ai Djnl Type: 2000 / … Clamping force: 200 t Platen dimensions: 950 × 950 mm Tie bar spacing: 570 × 570 mm Mold height: 300 mm Opening stroke: 650 mm Maximum platen distance: 950 mm

Condition: excellent (used), Year of construction: 2019, operating hours: 8,250 h, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, total length: 4,110 mm, total width: 2,650 mm, total height: 4,810 mm, overall weight: 22,000 kg, clamping force: 2000 kN size of mould plates h x v: 1772 x 800 mm min. mould height: 400 mm max. open daylight: 900 mm Hnedpfx Aisyv D T To Djl opening stroke: 500 mm round table diameter: 2000 mm screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar equipment included rotary table screen text german screen text english CEE-socket 16A core pulling hydraulically 4x air valve 1x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface robot EUROMAP 67 interface EUROMAP 73 interface OPC measures of machine l x w x h: 4.11m x 2.65m x 4.81m total weight: 22000KG

Condition: good (used), Year of construction: 2012, operating hours: 43,331 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 45 mm, clearance between the columns: 630 mm, displacement volume: 318 cm³, injection pressure: 2,470 bar, warehouse no.: 503604 manufacturer: ARBURG type: Allrounder 630 S 2500-800 controller: Selogica year of construction: 2012 operation hours: 43331 h clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 900 mm min. mould height: 300 mm max. mould height: 700 mm max. open daylight: 1300 mm opening stroke: 600 mm screw diameter: 45 mm swept volume: 318 ccm injection pressure: 2470 bar equipment included screen text german core pulling hydraulically 2x machine incl. belt conveyor machine incl. Handling machine incl. safety fencing Anti vibration mounts Hnedpfxjyvzyqo Ai Djl measures of machine l x w x h: 6.12m x 2.25m x 2.21m total weight: 12200KG technical data robot-system handling type: Linearroboter manufacture: Arburg controller: Multilift year of construction: 2012 X axis: 400 mm Z axis: 1400 mm C axis rotation: 90 ° total weight: 450 kg

Condition: excellent (used), Year of construction: 2012, operating hours: 38,000 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 392 cm³, injection pressure: 2 bar, ejector force: 225 N, ejector stroke: 90 mm, plate length: 900 mm, plate width: 900 mm, total length: 6,400 mm, total width: 1,950 mm, total height: 2,210 mm, overall weight: 12,140 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 900 mm, Equipment: documentation/manual, clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm Hedpoyvzykefx Ai Dsnl size of mould plates h x v: 900 x 900 mm min. mould height: 300 mm max. mould height: 700 mm max. open daylight: 900 mm opening stroke: 600 mm screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar equipment included: screen text german CEE-socket 16A CompactFlash interface for data storage core pulling hydraulically 1x air valve 2x machine incl. water flow regulator machine without material hopper machine without hopper loader Anti vibration mounts interface EUROMAP 67 interface OPC Schuko-socket 10A selection unit measures of machine l x w x h: 6.4m x 1.95m x 2.21m total weight: 12140KG

Condition: new, Year of construction: 2010, operating hours: 72,154 h, clamping force: 800 kN, screw diameter: 25 mm, displacement volume: 54 cm³, ARBURG Allrounder 900 T 800-150 Stock no.: 503576 Manufacturer: ARBURG Model: Allrounder 900 T 800-150 Control system: Year of manufacture: 2010 Operating hours: 72,154 h Technical Data – Clamping Unit Clamping force: 800 kN Tie bar spacing (h x v): 900 x 900 mm Min. mould height: 250 mm Max. daylight between platens: 550 mm Opening stroke: 300 mm Rotary table diameter: 900 mm Ejector stroke: 150 mm Ejector force: 46 kN Centric location, moving platen (D): 90 mm Centric location, fixed platen (D): 90 mm Technical Data – Injection Unit Screw diameter: 25 mm Shot volume: 54 ccm Hedpsytd Spsfx Ai Djnl Injection pressure: 2,500 bar Screw length: 24 l/d Screw torque: 210 N Plasticising rate: 49 g/s PS Free-flow injection rate: 80 g/s PS Dimensions & Weight Machine dimensions (LxWxH): 3.8m x 1.85m x 2.15m Total weight: 5,000 kg Equipment Display text in German 1x air valve Machine with rotary table Machine with water manifold Levelling elements BDE interface

Condition: good (used), Year of construction: 2013, operating hours: 36,163 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, displacement volume: 59 cm³, ARBURG Allrounder 375 V 500-170 Stock no.: 503615 Manufacturer: ARBURG Model: Allrounder 375 V 500-170 Control: Selogica-direct Year of manufacture: 2013 Operating hours: 36,163 h Technical Data – Clamping Unit Clamping force: 500 kN Minimum mold height: 200 mm Maximum mold height: 550 mm Maximum platen distance: 302 mm Opening stroke: 225 mm Rotary table diameter: 900 mm Ejector force: 70 kN Movable platen centering diameter: 125 mm Tool weight: 230 kg Technical Data – Injection Unit Screw diameter: 25 mm Shot volume: 59 cm³ Injection pressure: 2,500 bar Screw length: 24 l/d Screw speed: 35 rpm Screw torque: 210 Nm Number of heating zones: 5 Dimensions & Weight Machine dimensions (LxWxH): 3 m x 1.6 m x 3.48 m Total weight: 3,540 kg Equipment Display language: German Rotary table 1x hydraulic core pull Machine with water battery Machine without material hopper Hnedjytdfispfx Ai Dsl Levelling elements EUROMAP 67 handling interface EUROMAP 73 interface Interface for ejector plate safety

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, 2000 Arburg projector. 130 tons of closing force. The machine is delivered completely reconditioned in our facilities in Heras (Cantabria). New gaskets in the sealing body. We can show it in operation. Technical details CLOSING POWER 1300 kN PLATE DIMENSIONS 660x840 OPENING STROKE 575mm MAXIMUM DISTANCE BETWEEN PLATES 800/850 DISTANCE BETWEEN COLUMNS 420x420/470x470 Hnsderxtpdopfx Ai Dol SPINDLE 50mm INJECTION VOLUME 353cm3 INJECTION WEIGHT 117 YEAR OF MANUFACTURE 2000 INJECTION PRESSURE 2500bar

Condition: ready for operation (used), Year of construction: 2021, clamping force: 1,600 kN, overall weight: 5,900 kg, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled Hodpex D E Dyefx Ai Denl • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information Screw Diameter: 400 unit: 35 / 40 / 45 mm Injection Pressure (Max.): 400: 2500 / 2000 / 1580 bar Shot Weight (Max. g PS): 400: 141 / 184 / 232 g Heating Output 400: 9.7 kW | 5 zones Net Machine Weight: 400: 5900 kg

Condition: ready for operation (used), Year of construction: 2014, clamping force: 1,000 kN, screw diameter: 35 mm, injection weight: 132 g, overall weight: 3,650 kg, This Arburg Allrounder 420C 1000-290 was manufactured in 2014. It features a clamping force of 1000 kN, an opening stroke of 500 mm, and a platen size of 570x570 mm. Max shot weight is 132 g. Consider the opportunity to buy this Arburg Allrounder 420C 1000-290 hydraulic injection moulding machine. Contact us for more information. • Opening stroke: 500 mm Hnedpfeyglrwjx Ai Dol • Platen size: 570 x 570 mm • Max. volume: 144 cm³

Condition: ready for operation (used), Year of construction: 2007, clamping force: 5,000 kN, overall weight: 26,400 kg, This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. • Maximum mold opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mold height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie-bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Movable platen weight (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Installed total power: 96 kW • Color: Structural light gray / mint green / red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameters: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 Hnsdpfx Asydnigsi Djl • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticizing capacity (PS): 185 / 215 / 250 kg/h • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heating power: 6 × 5,500 + 4,300 W • Installed nozzle heating power: 1,100 W • Oil fill volume: 590 liters • Motor + heating fuse rating: 200 A • Motor fuse: 125125 A • Heating fuse: 63 A

Year of construction: 1998, condition: ready for operation (used), Product material: LSR, ejector stroke: 150mm, operating pressure: 250bar, clamping force: 750kN, min. tool installation height: 250mm, opening stroke: 375mm, tie bar spacing X/Y: 320mm/320mm, max. platen dimensions X/Y: 490mm/490mm, max. injection volume: 187.5cm³, injection force: 145kN, max. injection pressure: 1150bar, screw diameter: 40mm. Machine dimensions X/Y/Z: approx. 4000mm/1850mm/2000mm, weight: approx. 3100kg. Including two dosing units. An on-site inspection is possible. Hnsdpfx Aijyx H Hhj Djl

Condition: used, mileage: 4,50,795 km, power: 460 kW (625.43 HP), first registration: 08/2017, fuel type: diesel, empty load weight: 12,000 kg, maximum load weight: 14,000 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,600 mm, next inspection (TÜV): 07/2026, brakes: retarder, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden. ClassicSpace, Mercedes PowerShift 3, employee cabin, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, auxiliary heater, air horn, ABS (anti-lock braking system), traction control (ASR), retarder, PTO (power take-off), differential lock, fog lights, high beam headlights, work lights, beacon, storage box, leaf spring suspension, trailer coupling (air/light/hydraulic), aluminum tank, underrun protection, roof hatch, green environmental badge. Wheelbase: 3600 mm. Superstructure: used 20t Hyva 20-47-S hooklift system suitable for containers up to 5.7m. 7.5t front axle, rear axle crown gear 300 planetary 13.4t, electronic braking system with ABS and ASR, switchable ABS, disc brakes with full protection front and rear, turbo-retarder clutch, additional parking brake on front axle, condensate monitoring for compressed air system, front axle stabilizer, rear axle stabilizer, residual heat utilization, additional hot water heater, construction site filter, ClassicSpace, comfort lock system, offroad driving program, Mercedes PowerShift 3, LED daytime running lights, Fuel Performance Pack 1, pre-installation for toll collection, protective plate for tank and bumper, high performance engine brake, transmission oil cooling, Powertrain Pack, Protection Pack, ground clearance package, MB 131-2c PTO pump. In 06/2021, at approximately 234,000 km, the vehicle received a new turbo-retarder clutch at Mercedes! Hnjdpfoxdbxmsx Ai Djl The price is with hooklift system, plus €7,000 to €8,000 assembly costs! On request and at an extra charge of approx. €12,000 (net), also available with a new Hyva hooklift system! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE; subject to change, prior sale, and errors!

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-M-500-90 Year of manufacture: 1995 Serial number: 164822 Control system: Control unit: Arburg Multronica Injection unit: Injection type: vertical injection unit Hnsdpex Eitbsfx Ai Dol Screw diameter: Ø 20 mm Clamping unit: Clamping force: 500 kN Additional equipment: Pick system: part removal system Divider chute: separating chute / selective chute Enclosure: full protective enclosure

Condition: excellent (used), Manufacturer: ARBURG Hnsdpfxex Eiq Ho Ai Del Model: Allrounder 270-S-500-60 Year of manufacture: 1998 Serial number: 173062 Control system: Arburg Selogica Screw diameter: 18 mm

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 370S-500-100 Year of manufacture: 2011 Serial number: 218960 Control system: Control type: Arburg Selogica Clamping unit: Hjdpfx Aiox Eithj Dsnl Clamping force: 500 kN Injection unit: Injection type: vertical (vertical injection unit) Screw diameter: 20 mm

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270S-500-60 Year of manufacture: 1997 Serial number: 170175 Hnjdpfx Aiex Eiq Ts Djl Control system: Arburg Selogica Clamping force: 500 kN Screw diameter: 15 mm

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 370S-700-70 Hnedpfex Eirqex Ai Dol Year of production: 2010 Serial number: 214430 Control system: Arburg Selogica Direct Clamping force: 700 kN (70 tons) Screw diameter: 18 mm

Condition: used, Year of construction: 2013, working width 6 m Number of gangs 4 0 Hjdpfx Aeyv Ixaoi Djnl Number of folders 1 0 Number of rollers 1 St.

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, empty load weight: 13,865 kg, maximum load weight: 12,135 kg, overall weight: 26,000 kg, axle configuration: 6x6, wheelbase: 3,600 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, steel body, company installation, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, auxiliary heater, ABS (anti-lock braking system), traction control system (ASR), constant throttle, power take-off, vertical exhaust, differential lock, fog lights, rotating beacon, leaf suspension, air-light-hydraulic trailer coupling, aluminum tank, underrun protection, swinging tailgates, roof hatch, green environmental badge Hjdpoyvr Nvofx Ai Denl Wheelbase: 3600 mm Body: Meiller 3-way tipper body 9t front axle, rear axle crown wheel 300 planetary 13.4t, stabilizer on front axle, reinforced stabilizer on 2nd rear axle, drum brakes on front and rear axles, electronic braking system with ABS and ASR, ABS switchable, condensate monitoring for compressed air system, electronic parking brake, off-road driving program, Mercedes PowerShift 3, transmission oil cooling, ClassicSpace, comfort central locking system, rain sensor, pre-installation for toll collection, construction site filter, cyclone pre-filter for coarse dust, residual heat utilization, additional hot water heater, PSM 2nd generation, tank guard plate, tank capacity: 290l, LED daytime running lights, high performance engine brake, guard plate under bumper, seat belt monitoring, reverse warning system, 6mm thick tipping bed floor, Meiller 7-piston pump type 275, Mercedes 131-2c PTO pump. Spare wheel available at extra cost! Day registration: 25.06.2025 ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 211886, Plastic Injection Moulding Machine | Arburg Allrounder 630 S 2500-170 Clamping force [kN]: 2,500 Number of components: 3 Clamping platen width [mm]: 900 Clamping platen height [mm]: 900 Clear tie bar spacing horizontal [mm]: 630 Hodpfx Aisyf Ha Hj Djnl Clear tie bar spacing vertical [mm]: 630 Centre ring diameter [mm]: 160 Min. mould height [mm]: 400 Max. mould height [mm]: 700 Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 225 Thread [M]: 24 Multi turntable type: Rotary table Rotary table diameter [mm]: 900 Rotary table thread [M]: 20 Max. mould weight [kg]: 2,500 Max. mould weight, moving side [kg]: 2,500 Screw diameter [mm]: EE1:30, EE2:25, EE3:25 Max. shot weight [g] PS: EE1:83, EE2:59, EE3:58 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, robot Inspection possible at any time by appointment. Free loaded on truck (Butzbach). #Tags: ARBURG | Multi 3K | 630S

Condition: excellent (used), Year of construction: 2013, operating hours: 19,500 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 45 mm, Very low hours Arburg 570 E 2000-800 moulding machine fitted with Wittmann Primus 16T robot Arburg 570 E 2000-800 moulding machine specs; Hours = 19,800 Year = purchased new in December 2013 Tonnage = 200 Screw diameter = 45mm Hnsdpfx Aijyxhais Dsl Shot weight (g PS) = 291 Wittmann Primus 16T robot specs; Hours = very low Year = purchased new in June 2021 Travel = Z=2000mm, Y=1000mm, X=590mm comes with integrated conveyor and cell panels