Used Corner Rounder for sale (2,725)

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used HOMAG EDGETEQ S-240 edge banding machine, manufactured in 2021. The delivery also includes a KOGI dust extraction unit in a two-bag configuration with 2.2 kW power and 1,650 Pa suction capacity. The machine is additionally equipped with a glue pot for special applications. A valuation report (PDF) is attached. Processing units Joint trimming / pre-milling unit Corner rounding unit Radius scraper Glue scraper Buffing / polishing unit PUR-capable (PUR-ready system) Technical data Required air pressure: 6.5 bar Total machine length: 4.8 m Current operating hours: 460 h Machine data Type: EDGETEQ S-240 PROFI KDF 230 Serial number: 0-261-73-7111 Year of manufacture: 2021 Wiring diagram: 0-261-73-7111 Ijdoy Exwfspfx Adlstl Supply voltage: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Maximum current at full load: 17.3 A Fuse rating: 20 A Short-circuit current: 5 kA Control voltage: 24 V Protection class: NEMA 1 Largest motor current: 4.6 A Highest heating current consumption: 2.3 A Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: good (used), Urban Corner Cleaner type SV 815/4 Itsdpfxjlx Ar Ao Adljl

Condition: used, Year of construction: 2005, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: 12-032-SP, total width: 1,900 mm, total length: 17,370 mm, total height: 850 mm, Linear folding and gluing machine equipped with 4 electronically adjustable glue guns for gluing 4/6-corner boxes (ERO). Ijdozin Hhjpfx Adljtl

Condition: like new (used), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, overall weight: 59 kg, input voltage: 230 V, total length: 1,330 mm, total height: 1,028 mm, total width: 568 mm, Heat and dry a large hall, greenhouse, workshop, storage room, or construction site for extended periods without interruption for refueling. This low-usage APEX BGO-80B delivers 80 kW of heating output and comes with a complete 1000-liter external tank system, including a certified steel containment basin, for long runtimes between refills. The built-in 69-liter tank is sufficient for shorter jobs. Approximately 200 operating hours; manufactured 01/2026; thermostat-controlled automatic operation. Only one unit is available – once sold, it’s gone. Pickup and transport slots are limited. Best for: heating and drying halls, workshops, greenhouses, storage rooms, and construction sites requiring long runtimes without refueling. Not suitable for: enclosed spaces without an exhaust connection or living areas – indirectly fired, with exhaust vented through the Ø150 mm chimney. What the specifications mean in practice: • 80 kW heating output – heats large halls and open working areas, not just a corner. • 1000L external + 69L internal tank – long runtime with fewer refills. • 2,000 m³/h airflow – distributes warm air across a wide area. • Thermostat + digital display + 10m external room thermostat – automatic operation. • Indirect firing, Ø150mm chimney – combustion gases are vented outside, keeping the air clean for drying. • Large-wheel chassis – can be repositioned by a single person. Complete package includes: heater with digital thermostat and removable chimney, external room thermostat (10m cable), 1000L tank with EAGS-certified steel containment basin (mfg. no. 199890), and 2 oil-resistant connection hoses. Technical data: – Model: APEX BGO-80B (Type 56217) – Heating output: 80 kW / 68,800 kcal/h – Fuel: Diesel/heating oil Ijdpfjzrwapex Adletl – Consumption: 7.5 l/h – Mains voltage: 230V~50Hz – Fan motor: 900W – Blower output: 2,000 m³/h – Blower outlet: 340mm – Chimney: Ø150mm – Internal tank: 69 l – Dimensions: 1330x568x1028mm – Weight: 59 kg – Manufactured: 01/2026 – Protection: IPX4 Condition: Well-maintained, ~200 operating hours, fully functional. Location: Stanserstrasse 50, 6064 Kerns (self-pickup, transport by arrangement). Buy with confidence: manufactured 01/2026, only ~200 hours of use, used by us for hall heating/drying, fully functional, test run possible before pickup. Nameplate photos and a running video are available; in-person inspection in Kerns OW by appointment. You may verify the identity, condition, and operation before paying – we guarantee the machine is as described, complete, and functional at the time of inspection. Why buy now: a single used unit, not stock. Once sold, this configuration (heater + tank + certified basin, sold together) is gone. First-buyer bonus: free functional test run before pickup, tank connected and thermostat set to your target temperature, at no extra cost. Valid until Sept 9, 2026, or until sold. Action: send your intended application, required capacity, and destination – we will confirm suitability and provide a transport estimate.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 325 mm, total width: 185 mm, total length: 483 mm, overall weight: 16 kg, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 175 A, welding current (min.): 5 A, welding current (max.): 250 A, Equipment: documentation/manual, type plate available, Complete set: LORCH T 250 DC Basic Plus TIG welding machine with WUK 7 water cooling system and accessories. For sale is a professional industrial welding machine from the premium brand LORCH, model T 250 DC Basic Plus, combined with the innovative water cooling unit WUK 7. The system is designed as a mobile all-rounder as well as a fully functional workshop device and features state-of-the-art inverter technology. Manufacturer: LORCH (Made in Germany) Model: T250 DC Basic Plus incl. optional WUK 7 water cooling Condition: very good, fully functional Location: Graz _____ Scope of delivery (Full Set): • LORCH T 250 DC Basic Plus TIG inverter welding machine • LORCH WUK 7 water cooling unit (direct LorchNET connection) • TIG welding torch incl. hose set • Ground cable • Maintenance unit for gas / pressure regulator _____ The new price was approximately €6,000 _____ Highlights: • Innovative single-cable solution: Thanks to the modern cooling unit connection, the entire system (inverter + water cooling) now only requires a single power cable. The power supply and intelligent, demand-based control of the WUK 7 is carried out directly via the back of the welding power source. No cable clutter during assembly! • High-end inverter technology: Full 250 A welding power in a compact design. • FastPuls function (up to 2 kHz): Perfect for distortion-free welding of extremely thin sheets. • Robust mobility: Extremely lightweight base unit (only 16 kg), ideal for demanding applications in vehicle construction, metalworking, and tank and pipeline construction. _____ Technical data: • Power range: 5 – 250 A • Duty cycle (ED) at 40°C: 60% = 200 A / 100% = 175 A • Mains voltage: 400 V (mains fuse 16 A) • Cooling capacity (WUK 7): 0.53 kW • Weight: approx. 16 kg • Dimensions welding inverter Lorch T 250 DC: 483 x 185 x 325 mm (L x W x H) • Dimensions water cooling unit Lorch WUK 7: 547 x 212 x 265 mm (L x W x H) Itjdpfx Asyxvwijdljl _____ The device is in a ready-to-use condition. Inspection and test run can be arranged.

Condition: excellent (used), Year of construction: 2017, Year: 2017 - technically efficient, ready to work – after full service - split heads - pneumatic drive - maximum profile height: 160 mm - resistance unit lowered under the table Itodpfxjy Naz To Adlel - hydraulic lock for reversing the resistance unit

Condition: excellent (used), Year of construction: 2003, 526 USED Industrial line for the production of rolls, Kaiser rolls, hamburgers, and hot dogs. EQUIPMENT: - KOENIG INDUSTRIE II divider-rounder - 6 rows - pre-proofer - bun marking station - final proofer TECHNICAL DATA: - year of production: 2003 - capacity 3000-12,000 rolls/h - weight 50-130 g - marking: 3 roll markings: Kaiser roll, Portuguese roll - final proofer equipped with temperature and humidity control EXTERNAL DIMENSIONS (in cm): LINE: Ijdpfszwxr Rsx Adljtl - W: 180 cm - L: 900 cm - H: 376 cm FINAL PROOFER: - W: 340 cm - L: 460 cm - H: 380 cm The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used BRANDT KD 68 CF Optimat edge banding machine from 2001. Itsdpfx Adjzxy Nyslsl The machine is equipped with several processing units for complete edge processing. Among other things, it features pre-milling units, trimming units, radius milling cutters, corner copying devices, and pull knives for radius and surface finishing. Technical data / Equipment Manufacturer: BRANDT Type: KD 68 CF Optimat Year of manufacture: 2001 Machine no.: 0-261-02-8154 Control system: BRANDT NC 9 Feed speed: approx. 11 m/min Edge thickness: up to approx. 40 mm Voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Equipment: BRANDT NC 9 control system Pre-milling Trimming units Radius milling Corner copying Pull knives for radius processing Surface pull knife pneumatically controlled units Roller magazine / edge feeder Workpiece transport via feed chain Dust extraction connections on the processing units Central control via control panel Emergency stop The machine is currently still at the customer's site but would be immediately available! Transport is possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 4000 S PLUS Full Otomatik Servo Motorlu Çift Köşe Alüminyum Pvc Kesim Makinası, - It is a fully automatic controlled cutting machine designed to cut PVC and Aluminum profiles straight or angled with a double head Ø600 mm saw. - Hydro - Pneumatic Hydro - check controlled saw movement - Cutting Accuracy +/- 0.1 mm - High precision thanks to backlash-free gearbox - Automatically adjustable to two inward angles at 90 and 45 degrees - 15" Windows-based industrial PC - Diamond saw 2 x Ø600 mm - Servo motor motion system - 21.5 cm saw exit distance and 70 mm x 3 profile cutting capacity - Hydro-check saw speed adjustment - 9.5 meter cutting feature - 90 degree wedge slicing feature - Multi-language support Itsdoramy Tepfx Adlel - Conveyor profile support unit - Motion-sensitive support arm - Profile support unit between cutting heads - Spray saw cooling system - 2 vertical clamps - 4 horizontal clamps OPTION - Barcode printer - Cutting list transfer via USB Memory

Condition: good (used), BRANDT highflex 1220 edger Kdf220 Pre-milling cutters Replaceable trimming head Glue application with a roller Pneumatic pre-trimming guillotine Pressure rollers Finished-edge trimming blades Up-and-down milling unit R1-R2, pneumatically adjustable Corner rounding Profile trimming cycle Flat trimming cycle Max. part height 60mm Iedpfx Ajzy N Nredlotl Max. veneer thickness in roll 3mm Material width min. 70mm Feed rate 11m/min Machine length 455cm Connected power approx. 10KW Machine inspected, ready for operation.

Condition: used, maximum load weight: 12,640 kg, overall weight: 16,000 kg, first registration: 01/2014, loading space length: 7,290 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, loading space volume: 49 m³, total width: 2,550 mm, total height: 2,900 mm, Year of construction: 2014, Wagon no. G0101011_1- Manufacturer: Krone. * Double-decker equipment * Double corner fittings * Contour marking side/rear * Load certificate Code-XL * Portal door double espagnolette locks (outside) * Keyhole system inside * Forklift accessible * Telescopic support legs * Device for rail loading Iodpfx Adez A Rtujlstl * Lashing recesses * Lashing options Double-decker equipment without double-decker loading beams (available at extra cost!). Financing on request. Financing possible. NEW paint finish: Color selection in RAL. color possible when ordering! Delivery time after consultation! Technically ready for use, body and support legs newly painted. Door seals NEW ! Underbody (KTL) cleaned and provided with underbody protection. UVV valid. UVV documents available. Swap body has been repainted in pure white (RAL 9010). Dimensions are approximate. Offer subject to prior sale, prices net ex location D-59302 Oelde. Further details on request by phone or e-mail:

Condition: used, first registration: 02/1990, Year of construction: 1990, SPIERINGS Lattice Mast Tower/Truck Crane Chassis: • Engine power: 222 kW / 305 HP / displacement 8,250 cm³ • Vehicle dimensions: 12,395 x 2,600 x 4,000 mm • Operating weight: 35,000 kg • Permissible gross weight: 36,000 kg incl. 7,080 kg counterweight • Tires: 445/65 R22.5 • 3 axles • 1st and 3rd axles are steered • Beacon lights Crane: • Max. outreach: 30.4 m • Max. lifting capacity: 5,000 kg at 9.3 m outreach • Drive system: hydraulic, hydro pumps electrically powered by external power source or generator operation • Control system: electrically operated proportional and control valves • Max. corner load: 204 kN • Max. speed: 85 km/h • Can only be moved from the carrier vehicle! Hoisting Gear: • Motor: hydraulic variable displacement motor • Drive group: 1Am Itedpfx Adewmpczoljl • Displacement: 20..55 cm³ • Max. supply pressure: 260 bar • Transmission: planetary gear, i=27 • Drum diameter: 375 mm • Max. rope pull: 25 kN • Corresponding rope speed: 30 m/min • Holding brake: spring-loaded multi-disc brake Trolley: • Motor: hydraulic fixed displacement motor • Drive group: 1Am • Displacement: 16 cm³ • Max. supply pressure: 265 bar • Transmission: planetary gear, i=10.4 • Drum diameter: 200 mm • Max. rope pull: 6 kN • Max. speed: 50 m/min • With limit switch • Holding brake: spring-loaded multi-disc brake Slew Gear: • Motor: hydraulic fixed displacement motor • Displacement: 16 cm³ • Max. supply pressure: 300 bar • Transmission: planetary gear, i=160 • Max. superstructure slewing speed: 1.3 rpm • Slewing brake: hydraulic brake valve • Holding brake: spring-loaded multi-disc brake Luffing Winch: • Drive group: 1Em • Motor: hydraulic fixed displacement motor • Displacement: 16 cm³ • Max. supply pressure: 220 bar • Transmission: planetary gear, i=92 • Drum diameter: 200 mm • Max. rope pull: 38 kN • Max. speed: 18 m/min • Holding brake: spring-loaded multi-disc brake • With limit switch Load / Load Moment Limiter: • Pressure switch on hoisting drive motor • Mechanical switch triggered by turret frame bending Tower: • Working height: 20.8 m • Outer tower: length 9.9 m; Inner tower: 11 m Jib: • Trolley jib in lattice construction; can be positioned either horizontally or at 30° incline • 1st jib section: length 11 m / 2nd section: 11.1 m / 3rd section: 7.8 m - German machine! - Ready for operation! Errors and prior sale excepted! = Further information = Main boom length: 30.4 m

Condition: used, maximum load weight: 11,320 kg, overall weight: 16,000 kg, first registration: 01/2014, loading space length: 7,240 mm, loading space width: 2,460 mm, loading space height: 2,400 mm, loading space volume: 42 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2014, Vehicle No. G0119516_1 – Manufacturer: Krone. Iodpfxez A Rkgj Adlotl * Rail code * Floor: Aluminum floor * Double-deck system * Simple corner fittings * Outline marking on side/rear * Refrigeration unit * Load certificate Code-XL * Portal door with simple twist-lock fasteners (exterior) * Forklift accessible * Front wall niche * Telescopic support legs * Temperature recorder * Temperature recorder * System for rail loading * ATP test – new * Leak test – new * Double-deck equipment without double-deck load beams (available at extra cost!). Financing upon request. Financing possible. Flat fuel tank 60 L / Note: Flat tank extends the box!. Krone Telematics Cool W: Location monitoring, door monitoring, refrigeration temperature monitoring, and refrigeration unit monitoring can be activated at Krone for an extra charge. Delivery time: IMMEDIATELY AVAILABLE. Newly painted. Oil service – new. Solar panel for monitoring start-up voltage – new. Technically ready for use; body and support legs newly painted. Temperature recorder / DATACOLD incl. printer. Temperature recorder test – new. Test run to -18° C – OK!. Undercarriage (KTL) cleaned and treated with underbody protection. Valid safety inspection (UVV). UVV documentation available. PAINT – NEW!!!. LASI CODE XL!!!. Mobile refrigeration storage. Dimensions are approximate. Offer subject to change; sale is reserved. Prices are net ex works D-59302 Oelde. Further details available upon request by telephone or email.

Condition: used, maximum load weight: 12,620 kg, overall weight: 16,000 kg, first registration: 01/2014, loading space length: 7,240 mm, loading space width: 2,460 mm, loading space height: 2,550 mm, loading space volume: 43 m³, total width: 2,600 mm, total height: 2,900 mm, Year of construction: 2014, Vehicle No. G0119673_1 – Manufacturer: Krone. * Floor: Aluminum floor * Double-deck configuration * Double-deck beams * Simple corner fittings * Rear door design: Rear portal doors * Outline marking on side/rear * Refrigeration unit Itsdpfx Adsz A Rk Holjl * Forklift accessible * Telescopic support legs * Temperature recorder * Locking bars on rear doors: 2 * Lashing points ATP certificate – new. Leak test – new. Double-deck configuration with double-deck loading beams. Financing available upon request. Financing possible. Flat fuel tank 60 L / Note: Flat tank extends the box!. Krone Telematics Cool W: Location monitoring, door monitoring, cooling temperature monitoring, and refrigeration unit monitoring can be activated at Krone for an additional charge. Delivery time: IMMEDIATELY AVAILABLE. Newly painted. Oil service – new. Solar panel for start-up voltage monitoring – new. Technically ready for use, body and support legs newly painted. Temperature recorder / DATACOLD incl. printer. Temperature recorder test – new. Test run to -18° C – OK!. Undercarriage (KTL) cleaned and treated with underbody protection. UVV certificate valid. UVV documents available. Interchangeable body newly painted in pure white (RAL 9010). Mobile refrigerated storage. Dimensions are approximate. Offer subject to change, and sale is subject to prior sale. Prices are net, ex works D-59302 Oelde. Further details available upon request by phone or email.

Condition: used, maximum load weight: 12,340 kg, overall weight: 16,000 kg, first registration: 01/2015, loading space length: 7,700 mm, loading space width: 2,470 mm, loading space height: 2,700 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 2,925 mm, Year of construction: 2015, Car number G0121990- Manufacturer: Krone. * Simple corner fittings Itodpfx Asz A Rmhodljl * Contour marking side/rear * Loading certificate Code-XL * Roller door (aluminum) * Keyhole system inside * Forklift accessible * Fixed support legs * Device for rail loading * Lashing options Double-decker equipment without double-decker loading beam (available for an additional charge!). Financing on request. Financing possible. Paintwork NEW: Choice of color in RAL color possible when ordering!. Delivery time: IMMEDIATELY. Newly painted. Technically ready for use, body and support legs newly painted. Substructure (KTL) cleaned and provided with underbody protection. UVV valid. UVV documents available. Swap body has been repainted in pure white (RAL 9010). NEW PAINT!!!. LASI CODE XL!!!. Dimensions are approximate. Offer subject to change and prior sale is reserved, prices net ex location D-59302 Oelde. Further details available on request by phone or email:

Condition: used, mileage: 97,533 km, power: 290 kW (394.29 HP), first registration: 05/2022, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: blue, gearing type: automatic, Equipment: ABS, air conditioning, Special equipment: Storage compartment above the windshield with a lid, trailer coupling: Rockinger drawbar coupling, audio system: CD radio (Bluetooth, USB), classic cockpit, vehicle without Predictive Powertrain Control, vehicle without Truck Data Center 7, speed limiter system, 12-speed transmission - type: G 230-12, rear axle bevel gear 300, 10.4 cm info display, interior filter for construction site vehicles, cooling capacity for very hot climates, enhanced engine brake, programmable special module, frame overhang 800 mm, acoustic reversing warning (external warning signal), rear window, additional key with remote control (2), interface for fleet management system, external sun visor, side window roller blind, driver's door, additional 24V socket in the passenger footwell Additional equipment: Emission standard EURO 6, axle configuration: 8x6/4, front axle load 7.5 t, heated approach/front mirrors, 24V / 15-pole trailer socket, Arocs 5, exhaust to the right outside, straight exhaust pipe, above the 2nd axle, 170 Ah battery, batteries arranged on top of each other, front axle differential lock, compressed air connection in the cab, steel compressed air tank, compressed air unit with condensate monitoring, medium compressed air unit, automatic switching for driving lights (light sensor), cab: adjustable cab access, cab: hydraulic tilting mechanism, cab: M ClassicSpace, 2.30 m, tunnel 320 mm, cab variant: ClassicSpace, cab floor with engine tunnel 320 mm, cab: width 2.30 m, cab: height 420 mm, cab variant: M, external storage compartment on the left, storage compartments with lids behind the driver and passenger seats, cab: steel-sprung, standard, suspension: leaf spring / leaf spring, suspension: rear springs 2x15.0 t, suspension: front springs 7.5 t, 3 leaves, electric windows, tinted windshield, 100 A generator, urea tank (AdBlue): 25 liters, manual lift roof (steel), body/superstructure: chassis for dump truck, comfort locking system, fuel tank: 260 liters aluminum, left, unadjusted power steering pump, multifunctional steering wheel, steering oil cooler, air intake behind the cab, 2-cylinder air compressor, heated air dryer, engine 10.7 liters - 290 kW R6 diesel (OM 470), engine variant OM 470, auxiliary drive MB 131-2c, type of use: short-distance transport, wheelbase not defined, ramp mirrors, waste heat recovery system, key with remote control (2), protective plate under the front bumper, side marker lights LED flashing, seat cover / upholstery: fabric, seats in the cab: passenger functional seat, seats in the cab: driver's seat standard suspension seat, rear axle stabilizer, front axle stabilizer, steel rims 9.00x22.5, 12V socket in the passenger footwell, front bumper corners in steel, tachograph / EC control unit, automatic daytime running lights, drum brake front and rear axle, fixed rear underrun protection, transfer case - VG 3000 - 3W (1.04 selectable), preparation for toll collection system, straight front axle, increased ground clearance, permissible total weight 41.00 t, oil cooler for transmission Ijdpfx Asz Dmw Ejdletl * Mb Arocs 4140 8x6 * 4-axle dump truck * Automatic transmission * VIN: W1T96423210564336 * Mileage: 97,533 km * Superstructure: Fliegl dump body * Accident vehicle * Year of manufacture: 2022

Condition: used, maximum load weight: 13,400 kg, overall weight: 16,000 kg, first registration: 01/2013, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2013, Vehicle No. G0106520 – Manufacturer: Krone. * Simple corner fittings * Drop-in slat (wood) Iodpez A Rlkefx Adlotl * Side/rear contour markings * Load certificate Code-XL * Portal door with double external locking bars * Sliding side curtain * Forklift accessible * Fixed landing legs * Equipment for rail transport * Lashing recesses * Lashing options Financing available on request. Financing possible. NEW paintwork: Choice of colours in RAL – choose your shade when ordering! Delivery time: IMMEDIATE AVAILABILITY. New tarpaulin. Freshly painted. NEW tensioning ratchets! Technically ready for operation, superstructure and landing legs freshly painted. NEW door seals! Undercarriage (KTL) cleaned and treated with underbody protection. UVV valid. UVV documentation available. NEW PAINTWORK!!!. CARGO SECURING CODE XL!!!. Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net ex-works in D-59302 Oelde. Further details upon request by phone or email:

Condition: good (used), 333 USED Bread rounder, loaf extender, baguette maker, baguette machine. EXTERNAL DIMENSIONS (in cm): - height 140, - width 235, Itsdpfx Aoyrgm Hodlel - length 70. Paid options available: transport of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, maximum load weight: 12,000 kg, overall weight: 16,000 kg, first registration: 01/2009, loading space length: 8,690 mm, loading space width: 2,460 mm, loading space height: 2,400 mm, loading space volume: 51 m³, total width: 2,590 mm, total height: 2,750 mm, Year of construction: 2009, Vehicle No. G0106558_1 - Manufacturer: Krone. * Floor: Aluminum floor * Simple corner fittings * Electrical cable for refrigeration unit Iodpez A Rthjfx Adlotl * Rear door design: Rear portal doors * Refrigeration unit * Portal door with simple espagnolette locks (external) * Support legs fixed * Locking bars on rear doors: 2 * Tie-down rails New leak test. Rear portal/portal door with simple espagnolette locks/external made of stainless steel. Storage container wind and weatherproof, lockable, floor in good condition, no further repairs. Delivery time: IMMEDIATELY. Technically ready for use without further repairs. Test run down to -18°C OK! Substructure with signs of wear. UVV applicable. Mobile refrigerated storage unit. Dimensions are approximate. Offer subject to change without notice and prior sale. Prices net ex location, D-59302 Oelde. Further details are available by phone or email:

Condition: good (used), Year of construction: 2024, 159 USED Bread and baguette lengthener. Year of manufacture: 2024. TECHNICAL DATA: - Power: 0.55 kW. Itsdpfexgqupox Adlsl EXTERNAL DIMENSIONS (in cm): - Width: 69 cm, - Length: 200 cm, - Height: 137 cm. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: refurbished (used), Benier Beversal dough moulder Itjdpfxjzudkas Adljl weight range 50 -1200 grams output max 1600 pc/h

Condition: reconditioned (used), Year of construction: 2018, machine/vehicle number: 0-261-71-2124, functionality: fully functional, total length: 6,075 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, The edge banding machine, after a complete overhaul, will be available at the end of October. TECHNICAL DATA: Element feeding and removal ■ Pressure beam with pressure belt ■ Preparation for connecting a return system ■ Variable feed rate: 8-18 m/min ■ Automatically adjustable groove guide, height of the pressure beam, and pressure zone Edge banding ■ QA65 glue pot ■ EVA pre-melting unit: 8 kg/h Element finishing ■ Anti-adhesive and cleaning fluid ■ Corner rounding unit with a double profile FLEXTRIM ■ Trimming unit ■ Multifunctional unit for profiling with R-2 and R-1 tools ■ Edge milling unit with R-2 and R-1 tools ■ Flat profiling, polishing unit (top and bottom) Itodpfx Aez A Tf Tjdljl Documentation ■ Selected languages: Croatian, German, English ■ Format: Data carrier + paper documentation General information ■ Control system: HOMAG POWERTOUCH control system ■ CE marking: YES ■ Operational status: end of October ■ Machine length: 6075 mm ■ Year: 2018 ■ Total processed length: 2.5 million meters

Condition: excellent (used), Year of construction: 2021, operating hours: 300 h, functionality: fully functional, Complete pallet manufacturing line for sale, consisting of 2 hydraulic nailing heads: the first for nailing the top deck of the pallet from manufacturer Olimpia, and the second for nailing the bottom deck from manufacturer Storti. Both heads have been fully refurbished by Copamader in 2021 and feature all-new electrical, pneumatic, and mechanical components. The rest of the line includes a pallet turner module for flipping and rotating the pallet between heads as needed per model, a hot-branding module with 6 stamps, a corner-cutting module, a book-style flipper module for interlocking pallets if required, and a hydraulic stacker module with a 5-meter slatted outfeed conveyor for completed rows. Ijdpfx Adexbidrsljtl

Condition: used, Electric drive Cycle initiation via foot switch Itsdpfx Adeythzuelsl Various tools included in the scope of delivery: 1 x upper/lower blade with 4 mm radius 1 x upper/lower blade with 6 mm radius 1 x upper/lower blade with 7 mm radius 1 x upper/lower blade with 8 mm radius 1 x upper/lower blade with 9 mm radius 1 x upper/lower blade with 15 mm radius (currently installed)

Condition: used, Year of construction: 2011, total height: 2,000 mm, total length: 8,400 mm, total width: 1,080 mm, Colour: Grey Weight: 3.500 kg - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AH/335516 - Number of units [pcs]: 12 - └ 1st unit type: Spraying device - - Tools available: Yes Itsdpjyudwzjfx Adlel - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Tools available: Yes - └ 9th unit type: Flat scraping unit - - Tools available: Yes - └ 10th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 68 - Fuse [A]: 68 - Transport dimensions: 8400mm x 1080mm x 2000mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels