Used Corpuls 200 for sale (16,365)

Condition: excellent (used), For sale, a used KSB ETABLOC-G 32-200/752 centrifugal pump equipped with a 7.5 kW electric motor. The pump has been inspected – it is fully functional and ready for operation. Pump data: Manufacturer: KSB Aktiengesellschaft Model: ETABLOC-G 32-200/752 Ident-No.: 48862637 Design: G11 No.: 5-927-123823/1 Flow rate Q: 35 m³/h Head H: 61.5–43 m Pump speed: 2900 rpm Additional designation: Pumpen Distel Type: G32-200/752 No.: 198057/2 Motor data: Manufacturer: KSB Type: QUPS 132S2C-60 Power: 7.5 kW Power supply: 3-phase Frequency: 50 Hz Voltage: 380–420 / 660–725 V Current: 14.7–14 / 8.5–8.1 A Speed: 2880 rpm cos φ: 0.90 Protection class: IP55 Insulation class: F Used pump, in good technical condition. Normal signs of use and storage are visible. The visual condition is accurately shown in the photos. The pump has been inspected, is fully functional, and ready for further use. The item for sale is exactly the one shown in the photos. Ksdpfxozvf Dqj Adlsdt

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Datacon 2200 EVO (Gen3) The die bonder / multi-chip assembly machine from Datacon (Besi). Die attach, multi-chip, and flip-chip capabilities. Placement accuracy: ±10 µm at 3σ Kdsdpfjy S S Uwox Adlot Theta: ±0.15° at 3σ Bond force: 0.5–75 N Up to 4 working heads Wafer handling up to 12 inches Die attach up to approximately 7,000 UPH/module Flip-chip up to 2,500 UPH with dipping Heated bond head up to 450 °C Substrate area up to 325 × 200 mm Weight approximately 1,300 kg

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Machine Type: 5 Axis (4+1) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Kdsdpjy St Sdefx Adlot Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), For sale: KSB ETABLOC G 40-200/1102 G4 centrifugal pump with an 11 kW electric motor. The pump is used, inspected, and in fully working condition. It was checked before being listed for sale. The visual condition corresponds to the photos – normal signs of use and storage are visible. Pump specifications: Manufacturer: KSB – Klein, Schanzlin & Becker AG Type: ETABLOC G 40-200/1102 G4 Flow rate Q: 20–60 m³/h Head H: 57–35 m Rotational speed: 2900 rpm Serial No.: 5-118-547 043/1 Motor specifications: Kdsdjzvymgjpfx Adljt Manufacturer: KSB / Klein, Schanzlin & Becker AG Motor type: ZKA 160 MK2 Power: 11 kW Voltage: 380 V Current: 22 A Frequency: 50 Hz Rotational speed: 2880 rpm cos φ: 0.9 Serial No.: 0-118-886321 Ident-No.: 00533537 Motor No.: 544077 Condition: used – inspected – 100% functional. This is the exact unit shown in the photos that is being sold.

Condition: good (used), Year of construction: 1998, functionality: fully functional, turning length: 305 mm, turning diameter: 210 mm, spindle bore: 56 mm, spindle speed (max.): 25 rpm, spindle speed (min.): 5,000 rpm, Revolver lathe with 12 stations (non-powered) Tool holder: MK 3 Chip conveyor Kjdpfezl Ei Sjx Adlsdt Bar feed tube: IRCO DS 34.8 (year of manufacture 2013) Dimensions (L x W x H): - Machine: 4000 x 1700 x 1700 mm - Bar feed tube: 5500 x 1300 x 1500 mm Total weight: approx. 4,000 kg

Condition: ready for operation (used), Year of construction: 1974, machine/vehicle number: 5470, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, pressing force: 200 t, stroke length: 250 mm, table width: 250 mm, table length: 3,000 mm, table height: 800 mm, throat depth: 300 mm, ram plate length: 3,000 mm, distance table to ram: 500 mm, clearance between the columns: 2,550 mm, total length: 3,500 mm, total width: 2,000 mm, total height: 3,550 mm, overall weight: 14,000 kg, Equipment: documentation/manual, Force: 2000 kN Kdsdezzxduspfx Adlot Working length: 3000 mm Distance between uprights: 2550 mm Stroke: 250 mm Distance table – ram: 500 mm Gap: 300 mm Table width: 250 mm

Condition: excellent (used), For sale is an industrial KSB ETABLOC-GN 50-200/1502.21 centrifugal pump, equipped with a 15 kW KSB electric motor. Kdsdszvzu Eepfx Adlet The pump is designed for industrial applications, technological installations, water circulation systems, and other suitable media. Pump technical data: Manufacturer: KSB Aktiengesellschaft Type: ETABLOC-GN 50-200/1502.21 Identification number: 48861841 Flow rate Q: 12–100 m³/h Head H: 55–34.5 m Rotational speed: 2900 rpm Connections: flanged Motor data: Manufacturer: KSB Type: QUPA 160 M2B-6 Power: 15 kW / 50 Hz Voltage: 380–660–420 V Current: 27.8–16.1–25.2 A cos φ: 0.93 Protection class: IP55 Insulation class: F Motor weight: approx. 87 kg Condition: used, with normal signs of use and storage visible in the photos. A complete set consisting of the pump and electric motor is being sold, exactly as shown in the photos.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Equipment: documentation/manual, FTNON-JBT MOP-200 onion peeling machine + SRI-200 sorting table For sale: an FTNON-JBT MOP-200 industrial onion peeling machine, complete with the accompanying FTNON-JBT SRI-200 sorting table. Kdjdpezw A R Rjfx Adlet The equipment is suitable for industrial onion processing and can be used for inspecting and sorting the product after the peeling process. The two machines can be operated as part of a technological line. Machine details: Manufacturer: FTNON-JBT Type: MOP-200 onion peeling machine Type: SRI-200 sorting table Type: with onion feeding hopper Application: industrial onion peeling and sorting Stainless steel, food-grade design Suitable for industrial use Sold together with the sorting table connected to the onion peeling machine. The machines are in used condition. Viewing is possible by prior arrangement. The equipment is primarily recommended for food processing plants that want to expand their onion processing capacity or supplement their existing technological line. Additional technical data, photos, and information are available upon request.

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Kdodpfsz A Aw Sox Adlst

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection Unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Dosage volume: 679 ccm Clamping Unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Kdjdpfxezy In He Adlot Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Control system for hot runner zones x 10 Hardened injection unit – bimetallic Energy-efficient machine – features a system with 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 Robot Year of manufacture: 2019 4-axis robot: 3 axes driven by servo motors (electric); axis C – pneumatic Touch control panel Safety package for robot Robot with interface, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine, or to participate in live technical demonstrations at our premises in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2019, Working length: 6400 mm Depth of recess: 1250 mm Bending capacity: 2.0 mm Width of segmented bending blade: 10 + 10 mm Ksdpfez A Sxxox Adljdt Maximum bending angle: 143° Bending accuracy: ± 0.5°

Condition: excellent (used), Year of construction: 2018, operating hours: 100 h, functionality: fully functional, rotational speed (min.): 1,490 rpm, input voltage: 400 V, input frequency: 50 Hz, 200 kW electric motor IE4 efficiency class Year of manufacture: 2024 6-month warranty Kedpen Tntqofx Adlsdt 400 V 1490 rpm 315 l

Condition: excellent (used), For sale is a Pumpen Distel type 50/200 centrifugal pump equipped with an 11 kW electric motor from Antriebstechnik G. Bauknecht AG. The pump is used and in working order. Visually, it is in good used condition and has normal signs of use and storage. The actual condition and completeness are shown in the photos. Technical data of the pump: Manufacturer: Pumpen Distel Type: 50/200 Serial No.: 78756 Flow rate Q: 40 m³/h Pressure: 4.5 bar Rotational speed: 2900 rpm Power: 11 kW Connections: flanged Technical data of the electric motor: Manufacturer: Antriebstechnik G. Bauknecht AG Type: RF 11/2-75 Power: 11 kW Voltage: 380 V Current: 22 A Frequency: 50 Hz Rotational speed: 2930 rpm cos φ: 0.88 Protection class: IP54 Kedpfjzvyw Eox Adledt Insulation class: B Operating mode: S1 Mounting form: B3/B5 Condition: Used, in working order. Has normal signs of use and storage. Scope of sale: Complete centrifugal pump with an 11 kW electric motor – exactly as shown in the photos.

Condition: used, Year of construction: 2012, operating hours: 32,200 h, The machine offered is an ENGEL VC 200/40 Tech, manufactured in 2012. The machine is currently connected to the power grid. Technical specifications: Manufacturer: ENGEL Model: victory 200/40 tech Year of manufacture: 2012 Control system: ENGEL CC 200 Operating hours: approx. 32,200 h Clamping force: 400 kN / 40 t Screw diameter: 30 mm Injection pressure: 1,451 bar Kodoz Ap Imspfx Adlodt Displacement: 99 cm³ Platen size: 500 × 450 mm Tool height: 200 mm Opening stroke: 400 mm Max. platen distance: 600 mm Centering: 125 mm Ejector stroke: 100 mm Nozzle thread: M28 × 1.5 Smallest tool size: 280 mm Power: 15 kW Machine weight: approx. 2,900 kg Core pull: 1 Air ejector: 2 RSP: 3-part Design: tie-bar-less ____ Wittmann W702 picker / handling device Manufacturer: Wittmann Type: W702 Year of manufacture: 2012 Serial No.: 0000171976 Article No.: 7F00000506 X-axis: 100 mm Y-axis: 550 mm Z-axis: 90° Weight: approx. 52 kg Voltage: 105–250 V Current consumption: 1.6 A According to the available Wittmann documentation, the handling device has been refurbished. After completion of the work, a functional test and test run were carried out with the result "OK". _____ Cooling unit Manufacturer: aic regloplas GmbH Model: TAE EVO 081 Year of manufacture: 2006 Serial No.: 2200 086 152 Connection: 400 V / 3 Ph / 50 Hz Rated power: 11 kW Max. current consumption: 19 A Protection class: IP54 Max. operating pressure, water circuit: 6 bar Max. water temperature: 65 °C Refrigerant: R407C Refrigerant quantity: 5.5 kg Weight: approx. 331 kg _____ Scope of supply ENGEL victory 200/40 tech injection molding machine Wittmann W702 picker / handling device aic regloplas TAE EVO 081 cooling unit Inspection is possible by appointment. Dismantling and loading are the responsibility of the buyer! The machine is located in Bremen. _____ Subject to prior sale and errors in technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply; the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial customers and without warranty.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0-250-75-2227, input frequency: 50 Hz, input current: 21 A, For sale: a powerful, compact, vertical CNC drilling machine by HOMAG. Used in the production of custom-made furniture, regularly serviced, and in very good condition. Ready for immediate use. Key information and technical condition: Model: Drillteq V-200 / Optimat BHX055 Year: 2020 Workpiece length (X): 200mm to 2500mm Workpiece width (Y): 70mm to 850mm Workpiece thickness (Z): 12mm to 60mm Kodpfxszvxz Ao Adledt Safe clamping system protects delicate panel surfaces Power supply: 400V (3 phases), 50Hz

Condition: used, Year of construction: 2003, functionality: fully functional, input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, saw blade diameter: 520 mm, saw blade bore: 50 mm, We offer this used GRAULE ZS 200 - F miter saw, year of construction 2003. Kdjdpfx Aezx N T Ijdljt Manufacturer: GRAULE Model: ZS 200 - F Serial number: 2003/3-13 Year of manufacture: 2003 Saw blade diameter: 520 mm Bore diameter: 50 mm Rated voltage: 400/230 V Rated current: 6.4 A Frequency: 50 Hz If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), For sale: KSB ETABLOC G 32-200/752 centrifugal pump with electric motor. The pump has been inspected and is in fully working condition. It features a robust industrial design from the renowned manufacturer KSB, and is suitable for water, circulation, and various industrial applications. Ksdpfx Adozvzvisljdt Technical data: Manufacturer: KSB – Klein, Schanzlin & Becker AG Type: ETABLOC G 32-200/752 No.: 0-118-902 133 Flow rate Q: 10–37 m³/h Head H: 57–34 m Rotational speed: 2950 rpm Motor power: 7.5 kW Voltage: 380 V Current: 14.2 A cos φ: 0.91 Frequency: 50 Hz Protection class: IP54 Insulation class: B Motor: three-phase Motor type: ZKA 132 S-2 Connections: flanged Condition: used, inspected, and in fully working condition. It has normal signs of use and storage, as visible in the photos. The item for sale is a complete KSB pump with an electric motor, exactly as shown in the photos.

Condition: used, Year of construction: 2022, Suction nozzle diameter: 200 mm Maximum volumetric flow: 3200 m³/h Nominal volumetric flow: 2262 m³/h Volumetric flow monitoring: differential pressure gauge Negative pressure: 2250 Pa Filter area: 16 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 65 dB Chip collection bag volume: 320 l Filter cleaning: motorized Motor power: 4 kW Machine length: 2340 mm Machine width: 880 mm Machine height: 2190 mm Weight: 570 kg Kdedpfx Asz A D U Ssdlst

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 17,000 h, Machine in very good condition, only 17.000 hours. Ksdpfx Adez Ayq Eolsdt Fully functional.

Condition: used, Year of construction: 2009, functionality: fully functional, type of input current: AC, total width: 1,350 mm, total length: 1,200 mm, total height: 1,300 mm, spindle speed (max.): 3,900 rpm, overall weight: 530 kg, input voltage: 400 V, milling spindle length: 200 mm, rotational speed (min.): 3,900 rpm, rotational speed (max.): 3,900 rpm, working width: 200 mm, spindle diameter: 50 mm, We are offering this used Omec F10/200 fork cutter, manufactured in 2009. Manufacturer: Omec Model: F10/200 Year of manufacture: 2009 Kdedpfx Aezmug Nedlst Condition: used Machine type: Fork cutter, finger fork, drawer fork Fully functional OMEC F10/200 milling machine for the production of finger forks for drawer blade manufacturing. Manufactured in 2009, motor power 11.5 kW, spindle diameter 50 mm and weight approximately 530 kg. Without fork cutter set. The machine is in good condition and can be inspected and demonstrated by appointment. Loading and transport can be arranged.

Condition: like new (used), Year of construction: 2015, machine/vehicle number: TXLT5096, turning diameter over cross slide: 220 mm, turning length: 454 mm, turning diameter: 340 mm, spindle bore: 51 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 185 mm, travel distance Y-axis: 30 mm, travel distance Z-axis: 530 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 24 m/min, Equipment: rotational speed infinitely variable, TAKISAWA TCY 200 YL5 LATHE • Type: TAKISAWA TCY 200 YL5 Lathe • Year: 2015 • CNC: FANUC 32iB • Travel: X/Z/Y/A 185/530/30/580 mm • C-axis • Machinable length: 454 mm • Maximum workpiece diameter above the machine bed: 340 mm • Maximum workpiece diameter above the carriage: 220 mm • Bar capacity: 51 mm • Spindle speed: 3200 rpm • Spindle power: 7.5/5.5 kW • Spindle nose: A2-6 • Turret: 12 stations • Live tool speed: 6000 rpm • Live tool power: 3.7/2.2 kW • Digital tailstock • Rapid traverse X/Z/Y/A: 20/24/10/20 m/min • Dimensions: 2880 x 1795 x 1700 mm • Weight: 4.1 t • 200 mm diameter chuck with automatic control • Chip conveyor • 11 tool stations • 2 axial turning tool stations • 2 radial turning tool stations • 1 live center • Documentation • Machine available for inspection in ARDENNES. Kdjdpozc Edrjfx Adljt

Condition: used, Year of construction: 1986, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, pressing force: 204 t, stroke length: 220 mm, table length: 4,000 mm, clearance between the columns: 3,400 mm, overall weight: 12,000 kg, We offer this used PROMECAM Amada STPC 204 200 40 160 press brake, manufactured in 1986. Machine number: STPC 200 40 160 Maximum pressing force: 2,040 kN Maximum stroke: 220 mm Voltage: 380 V Frequency: 50 Hz Date of manufacture: 20.10.86 Bending length: 4 m Distance between uprights: 3.4 m Includes tooling! Machine weight: approx. 12 tons Equipped with CYBELEC DNC 7000 control Kedpfxoy Tmlas Adljdt A crane is available for loading. The machine is functional and still in use / can be tested while powered on. However, due to its age, we cannot offer any warranty. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2013, functionality: limited functionality, overall weight: 18,500 kg, We are offering this used KraussMaffei 200-750 EX injection molding machine, manufactured in 2013. Type: KM 200-750 EX International size designation: KM 750 EX/200 Year of manufacture: 2013 Machine No.: 61019432 Machine weight: 18,500 kg Kedpfx Adszxk Ruslsdt Please note: The machine is sold without machine conformity, as the safety door on the operator side is missing. The control panel is mounted on the rear of the machine. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 0-250-87-8843, input frequency: 50 Hz, input current: 21 A, For sale: a powerful, compact, vertical CNC drilling machine from HOMAG. Used in the production of custom-made furniture, regularly serviced, and in very good condition. Ready for immediate use. Key information and technical condition: Kodpfx Aozvx Ucodlodt Model: Drillteq V-200 / Optimat BHX055 Year of manufacture: 2022 Workpiece length (X): from 200mm to 2500mm Workpiece width (Y): from 70mm to 850mm Workpiece thickness (Z): from 12mm to 60mm Safe clamping system to protect delicate surfaces Power supply: 400V (3 phases), 50Hz

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Kedpfx Adozvhlksledt Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.