Used Corrosion Protection Film for sale (14,451)

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Transmission * TraXon automatic transmission, 12 gears Driver Assistance Systems Rsdpfe Agxtfex Airsch * Electronic Braking System (EBS) * Cruise control Lights and Visibility * LED headlights Audio & Communication * Radio Exterior * Lift axle * Sunroof * Differential lock * All-season tires * Digital exterior mirrors Safety * Intarder * Electronic Stability Program (ESP) * Anti-Slip Regulation (ASR) * Anti-lock Braking System (ABS) * Outside temperature display * Immobilizer Interior * Fabric seats * Interior color: anthracite * Leather steering wheel * On-board computer * Sun visor * Cool box Comfort * Air conditioning * Stationary air conditioning * Driver's seat with air suspension * Power steering * Electric windows * Central locking Additional Equipment * XG cab, Adaptive Cruise Control with FCW and AEBS-3, Lane Change Warning System, Front axle: 8.00 t * Parabolic spring * 163N, Goodyear, R1,315/70R22.5GO EQMDU 154/150 L Traction ABB 3P RR * Not applicable, Emission class Euro 6, OBD-E engine H6, Fuel B7, Automated transmission * TraXon, 12 gears, Wheelbase 4.00 m/rear overhang 0.99 m, Standard component arrangement, PACCAR Connect 5-year subscription, Plus Warranty - Drivetrain, 3 years/500,000 km, Chassis front: Aero base plate, Cab with air suspension, Exterior sun visor, LED headlights and fog lights, LED skylights and additional LED lights in the cab roof, Prepared for two LED headlights for the rear of the cab, Windshield with sun protection film, Laminated glass with sun protection film, Main mirror, Convex main mirror, No front mirror, No digital view system from DAF, DAF Corner View, Side skirts with extension on the upper/lower side, Lower cab step: Crystal White, Mirror housing Crystal White, Steering wheel: Leather, Driver's seat: Luxury Air, Armrests on both sides of the driver's seat, Driver's seat: Swivel base, Passenger seat: Comfort Air, Armrests on both sides of the passenger seat, Storage compartment with drawer in the center console, Refrigerator and drawer, Preparation for air compressor, Xtra Comfort mattress for the lower sleeper berth, Upper sleeper berth, Curtains with privacy curtain, LED interior lighting: Luxury, Automatic cab climate control, Stationary air conditioning: integrated, Sunroof with electric operation, Auxiliary power supply: Standard + 2x 40 A, ECAS remote control with extended functions, FMS connector: extended and prepared, DAF Truck Navigation, Digital tachograph: VDO version G2V2A, Infotainment including DAF Truck Navigation, Antennas: Radio, 2x mobile phone, GNSS Extra: CB, Main switch for chassis, Axle load monitoring, Front axle(s): 385/55R22.5, F1,385/55R22.5GO EQMSU 160/158 L Steering ABA 3P, MX-13 engine: 355 kW/483 hp, Cab emblem: 480, Rear axle ratio 2.05, Mechanical differential lock, ZF Intarder, Exhaust pipe on the right, EAS unit: right-hand drive, Overhang 85-l-AB fender left, Air tank made of aluminum, 1105-l Al-tank: 765 left + 340 right, H 620 mm, Fuel tanks left and right, One wheel chock, Rear lights with LEDs, SAF S36-20, Cast iron, 150+40 mm, Permanently wired body signals and warnings, Preparation for aftermarket switches, Application connector: flexible, Permanently installed auxiliary drive for the gearbox, no first auxiliary drive, Generator 130 A, Batteries: 2 x 210 Ah AGM, Battery energy monitoring, Additional cab insulation, Standard fuel quantity + 30 liters, Climate package Other Dimensions and Weights * Permissible total weight: 18,000 kg

Condition: new, axle configuration: 2 axles, loading space length: 6,400 mm, loading space width: 2,480 mm, loading space height: 600 mm, suspension: air, tire size: 205/65-17,5, = Additional Options and Accessories = - LED lighting - Air suspension = Notes = Internal reference number for customer inquiries: 5-087 PAVIC TBPA 14 64ZC Container Flatbed Trailer Suitable for 20" containers in various versions. Standard and wide, thanks to telescopic container locks! * Ultra-low design with a loading edge height of only 830 mm (unladen)! * Approx. 780 mm coupling height * Chassis length approx. 6400 mm (front frame to front frame) * Coupling dimension (B) = 7900 mm * Includes drop sides and stakes, each removable * Sideboard height 600 mm * Front wall approx. 800 mm high * 4x side-extendable container locks * Container locks flush with the floor * Ferry lashing rings: 2x at the front and 2x at the rear * 1 set of landing legs at the front, single-sided operation * Drawbar eye Ø 40 mm * 2x SAF axles, 7t each * Air suspension (incl. lift and lower function) * Premium tires 205/65 R 17.5 twin tires (max 90 km/h) * LED lighting system * Rear socket for beacon * Warning boards, red/white striped, extendable, 2x at the rear and 2x at the landing leg (with marker light on the outside) * KTL with zinc phosphating plus powder coating, highest corrosion protection Financing is available through one of our financing partners. Our sales team is happy to answer any further questions. This is a non-binding offer. Subject to prior sale, errors, and changes. = Further Information = Axle configuration Tire size: 205/65-17.5 Brakes: Drum brakes Suspension: Air suspension Rsdezk H Elopfx Airsch Weights Unladen weight: 4,100 kg Payload: 9,900 kg gross vehicle weight: 14,000 kg Functional Body manufacturer: PAVIC Container Flatbed Condition General condition: very good Technical condition: very good Visual condition: very good

Condition: new, Year of construction: 2025, operating hours: 23 h, functionality: fully functional, Only 23 hours of use. New price: €18,736. The CT80 is the smallest in the family of ride-on scrubber-dryer machines. It is compact but knows how to work hard. With its robustness and power, it handles many industrial cleaning tasks. It is versatile, as it comes in two versions: for intensive use, there is the model with 2 brushes (CT80-BT70), and there is also the ECO model (CT80-BT55 ECO) with one brush and therefore a smaller working width. (Excluding charger and batteries) Product specifications: Extremely compact (130 cm length) with a large tank capacity of 79 and 83 liters, respectively. Redszzlvdopfx Airsch ECO Select function: program that regulates water and detergent supply in relation to the speed of the machine, the brush, and the suction motors, which reduces both energy consumption and noise production. Simple and clear control panel with language selection. Supplied with a memory card for maintenance and service. CFS system: liquid supply from the center of the brush. Prevents unnecessary waste of detergent. SLS system: self-leveling mechanical system for constant, perfect brush pressure on the floor. EDD system: floor nozzle designed for maximum productivity and perfect drying results. Auto-stop system: Easily deactivate and restart the functions using the foot pedal, including the delayed stopping of the brush and suction motor. Ideal also for uneven floors. Brush, suction rubbers, and water hoses can be replaced without tools. Dosing system for detergent supply. Ensures systematic savings on detergent consumption. The tank is easy to remove. Anti-foam system with special electromagnetic protection of the suction motor. The automatic suction stops when the tank is full. Yellow marked service points for easy daily maintenance. Brush with usage indicator. Tiltable tank for easy access to the technical part of the machine. High-quality motor gearbox, suction motor, and electrical components. The standard nylon brushes have a usage indicator. Electronic adjustment of detergent supply. Raised water discharge hose (ø 50 mm). Built-in battery charger. Automatic brush click-on/off system. Brush rotation: independent brush motor with gearbox in an oil bath. Brush pressure: adjustment motor ON/OFF. Vacuum: 2-stage motor with stainless steel fan and shaft. Traction: motor wheel with parallel shaft, 8% climbing capacity. Plastic parts. Tanks: impact-resistant, high-quality plastic (polyethylene). Floor suction rubbers: made of latex (rubber), usable on 4 sides. Hoses: all water supply and discharge hoses are made of durable polyurethane. Wheels: oil-resistant. Chassis: double-treated, partially cast, and galvanized frame. Bearings: protected against moisture and splashing water. Bolts and nuts: where they come into contact with water, made of stainless steel. Control panels: equipped with protective film against splashing water and moisture. Solenoid valve: ‘Viton’ diaphragm resistant to chemicals. Sensors: water level in both tanks is protected against accidental impact. Memory card: for machine data log: For storage of: battery charging cycles, motor absorption. Display: large, multilingual, complete with hour meter, battery voltage indicator, and cleaning programs.

Condition: new, mileage: 100 km, power: 350 kW (475.87 HP), fuel type: electric, overall weight: 18,000 kg, color: white, gearing type: automatic, emission class: euro6, Equipment: electronic stability program (ESP), navigation system, Vehicle number: 550041 accident-free, fully serviced according to maintenance schedule, non-smoking ---- ASSISTANCE SYSTEMS * Lane change warning system LIGHT & VISION * High beam assistant EXTERIOR * Exterior sun visor Other features -----Color/Paint----- Chassis color: Anthracite Gray * Cab color E1980WHTE CRYSTAL WHITE * Lower step, cab: Crystal White -----Tires/Wheels----- Goodyear * RR, not applicable * Front axle(s): 385/55R22.5 * Alu Alcoa Dura-Bright 32 mm * F1, 385/55R22.5GO AFMAXS 160/000 K Steering ABA * R1, 315/70R22.5GO EQMD 154/150 L Traction BBB 3P -----Equipment/Special equipment----- Adaptive Cruise Control with FCW and AEBS-3 * Electric vehicle * Rear axle ratio 2.38 * Wheelbase 3.90 m / rear overhang 0.99 m * Standard component arrangement * Batteries in rear overhang, no spare wheel holder * Standard warranty 1 year, 2nd year DL 1 year PH * Sleeper High Cab * Chassis front design: Aero base plate * Air-suspended cab * Signal horns, 2 sets * LED headlights, cornering and fog lights * Headlight washer * Headlights with height adjustment * LED skylights * Two LED headlights for cab rear wall * Handle & Trim: Black, Wall: Darkened/Window * Windshield with sun protection film * Laminated glass with sun protection film * Digital vision system by DAF * DAF Corner View * Central locking, 3 keys, 2 remote controls * Adjustable roof spoiler, short, Sleeper High Cab * Side fenders, one side foldable * Steering wheel, leather * Dashboard design: Plateau * Cab, interior trim: Argenta * Door panel: Loosely woven fabric * Driver's seat: Super Air * Armrests on both sides of the driver's seat * Passenger seat: Cinema with Alcantara upholstery * Passenger seat: Cinema with Alcantara upholstery * Cooler box or refrigerator * Xtra Comfort mattress + topper under bunk * Luggage compartment * Safety net on both bunks * Curtains with separating curtain * LED interior lighting: Luxury * Automatic cab climate control * Roller blind, passenger side * Sunroof with electric operation * Auxiliary power supply: Standard + 2x 40 A * ECAS remote control with extended functions * PACCAR Connect with navigation and tablet software * Preparation for toll system * Digital tachograph, VDO 1C, version G2V2 * Infotainment including DAF Truck Nav., tablet preparation * Speakers: Exclusive * Antennas: Radio, 2x mobile, GNSS Extra: CB * Predictive Cruise Control * Wireless charger * Airbag (driver) and 2 seatbelt pretensioners * Rear warning system * Front: 9.00 t, parabolic, 183N * Axle load monitoring * E-motor EX-D2 350 kW Cab emblem: 350E * Charging with 325 kW DC * Mechanical differential lock * Parking brake assistant * 5 HV battery packs: Under cab, L1+L2+R1+R2 * Air reservoir made of aluminum * Catwalk with step, long * One wheel chock * SAF S36-20, cast iron, 150+40mm, low maintenance * Chassis protection bar * Hard-wired body signals and warnings * ECAS control * Preparation for aftermarket switches * CAN J1939 functions in body connector * Additional connector, lighting, chassis * E-PTO socket 650 V DC < 90 kW * ePTO control when ignition is ON * Batteries 2 x 210 Ah AGM * Additional cab insulation Rcsdpfeyltkfsx Aireh * Safety package NGD * Executive package XD/XF * Climate package ---- Subject to prior sale and errors. The vehicle description is for general identification of the vehicle and does not constitute a guarantee in the legal sense. For the exact scope of equipment, please refer

Condition: like new (used), Year of construction: 2019, clamping force: 2,200 kN, Equipment: documentation/manual, Fanuc FANUC ROBOSHOT Alpha S220iA (2019) _FANUC Roboshot α-S220iA – Equipment List_ _Basic Technical Specifications_ 1. Clamping force: 2200 kN 2. Injection speed: 200 mm/s 3. Max. injection pressure: 1900 bar 4. Min./Max. mold height: 250–750 mm (extended) 5. Clamping stroke: 550 mm 6. Tie bar spacing (H×V): 650 × 650 mm 7. Locating ring: Ø 160 mm 8. Ejector stroke: 150 mm 9. Screw diameter: 48 mm (318 cm³) 10. Screw/barrel: W/C (hardened, high wear & corrosion resistance, up to 350 °C, 30% GF) 11. Nozzle: Standard open R19D4 _Control & Software (FANUC 31i-B CNC)_ 1. 15" LCD touchscreen 2. SI unit (kN, MPa...) 3. Password-protected screen lock 4. AI pressure profile trace function 5. AI metering control function 6. AI mold protection function 7. AI ejector protection function 8. Backflow monitor function 9. Precise metering 2, 3 10. Auto purge function 11. Extruder delay timer function 12. High precision V-P switch function 13. Injection unit temperature control and display 14. Automatic mold height adjustment 15. 2-stage ejection 16. Ejector delay function 17. Pre-ejection function 18. Optimal energy consumption function _Standard Machine Equipment_ 1. Extended mold height 2. 4-circuit rotameter 3. Automatic mold height adjustment 4. Hopper slider 5. 3-color LED signal lamp 6. Automatic purge and material cleaning function 7. Plasticizing speed control 8. Decompression control additional function 9. Backflow monitoring function 10. AI mold and ejector protection 11. Mold protection output on moving platen 12. Energy consumption measurement function 13. Robot interface (Euromap 67) 14. Auto stop/shutdown mode 15. 3 independent air valves 16. 8 digital outputs, 11 digital inputs 17. Pre-injection / injection compression function 18. Cascade injection valve control (up to 8 valves) 19. USB and memory card output 20. Tool kit (standard tools + grease gun) 21. User manual (Hungarian) 22. Warning labels (Hungarian) _Clamping Unit Specifications_ 1. Mechanism: Double toggle 2. Clamping force: 2200 kN / 220 tonf 3. Die height (single platen): 250–650 mm _(opt. 250–750 mm)_ 4. Clamping stroke: 550 mm 5. Locating ring: Ø 160 mm 6. Tie bar spacing (H×V): 650 × 650 mm 7. Platen size (H×V): 900 × 900 mm 8. Min. mould size (H×V): 375 × 375 mm Rcsdpszkttcefx Aireh 9. Ejector stroke: 150 mm 10. Max. ejector force: 35 kN / 3.5 tonf

Condition: used, maximum load weight: 211 kg, overall weight: 850 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 2,070 mm, loading space width: 1,080 mm, total width: 1,495 mm, total height: 1,150 mm, A56 GW26GA01430, Product information "STEMA FT 8.5-20-10.1B" incl. jockey wheel and shock absorbers for 100 km/h with confirmation - all players from BSG Chemie Leipzig have signed here; subsequently coated with UV-resistant clear lacquer * Optimum road holding due to stable chassis with safety V-drawbar * Robust rubber spring axle with independent wheel suspension * Maintenance-free compact wheel bearings * Solid side walls with double corrosion protection through GALVALUME (aluminum-zinc coating) * Large and stable lashing hooks for securing loads (model-dependent) * Sturdy cast steel toggle-clamp fasteners (model-dependent) * Non-slip, waterproof phenolic plywood floor Rodpfx Aijyqdtujrjch * All-round protected multifunction lights * Incl. lid Low loader by STEMA, type FT 8.5-20-10.1 with lid, gross weight: 850 kg, overrun braked, lid color: green/white, 100 km/h approval ...and much more. Subject to errors and prior sale.

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm Redpfx Aisymf Rtjroch weight 1500 kg Manufacturer: GERD WOLFF Technical Details: • Length 3000 mm • Width 1500 mm • Height 200 mm • Weight 1500 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi3, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Rjdpfxjz Ipclo Airoch Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Year of construction: 2026, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S23SynthesiWaage03, Exhibition machine, like new. SYNTHESI integrated with scale Pallet weighing system integrated in the machine FILM SLIDE TYPE “FE” (ELECTROMAGNETIC BRAKE) Foil application tension electronically controlled via control unit Rsdpfxsz Ipdvo Airsch Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ TECHNICAL DETAILS: Turntable 1500mm (Optional 1650mm) Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25NEOS05, Mobile stretch winder NEOS TECHNICAL DETAILS: HMI touch panel 7" two maintenance-free AGM batteries 12 V - 120 Ah connected in series Standard charger: 230 V - 1L+N+PE - 50 HZ Autonomy 200 - 300 pallets per load High frequency battery charger with LED indicator Winding height machine (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop function of the machine according to CE standards Ø 22 mm ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: F01 - 01 - cross winding (up/down) F01 - 02 - Single wrap (up only or down only) F01 - 03 - Complete wrap cycle with foot wraps at the same starting height F01 - 04 - Fast cycle (with limited or no foil overlap) F01 - 05 - layer cycle F01 - 06 - Economical winding program Soft start cycle for applying edge protection Winding cycle with reinforcement and adjustable number of windings Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: 99 storable winding programs All function parameters can be set via the display F00 - Screen lock program change Adjustable machine speed around the pallet up to 90 m/min Lifting carriage speed can be adjusted up and down independently of each other Lift carriage speed from 1.3 up to 5.4 m/min Lifting carriage speed down from 1.3 to 5.4 m/min Number of wraps on the pallet foot (1 - 10 wraps) Number of wraps on the pallet head (1 - 10 wraps) Adjustment pallet wrapping height Rcodpoz Ipk Nsfx Airsh Foil application tension foot & head winding / ascent & descent independently adjustable Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable Ergonomic height for foil change Display foil consumption (option for PRS - PS) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE: Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% - PATENTED "ARYA" SYSTEM FOR PRS / PS - ARYA system for automatic foil blowing and cutting, incl. infrared remote control -Manual cord formation on the foil carriage to strengthen the winding -Automatic cutting unit (FE, PRS & PS) - Machine version for temperatures down to -5° C (only version without HMI touch panel) Other systems available immediately from the Ludwigsburg warehouse Illustration similar.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Rjdjz Ipnhjpfx Airech Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Rjdpfx Asz Ipwcoiroch Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi07, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Rcjdpfxez Iqtfo Airsh Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 1049 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND Authorized Dealer - All items in stock! !! SPECIAL OFFER !! SIEGMUND Retro Welding Table 2400x1200x200, accessories included SIEGMUND welding table just like 25 years ago with plasma nitriding and modern table legs Product Description - Table dimensions: 2400x1200x200 mm - High-quality S355J2 N steel + with plasma nitriding - Material thickness: approx. 24.5 - 27 mm - Hole diameter: 28 mm - Holes arranged in a 100x100 mm grid - Corners, edges, and holes chamfered at 45° - Side panel height: 200 mm - Side panel holes in a diagonal grid - Construction reinforced with ribs Plasma-nitrided version: - Protection against rust, scratches, and welding spatter adhesion - Corrosion-resistant / higher load-bearing capacity Specifications: - 28-hole pattern / dimensions 2400 x 1200 x 200 mm - plasma-nitrided version - includes 4x base feet (basic configuration) - Includes accessory set (see Figure 3): * 8x 280626.N * 12x 280511 * 6x 280410.N * 2x 280420.N * 2x 280422.N * 4x 280110.N * 2x 280152.N * 1x 283999 Rjdpfx Aioz Hz Ikerech

Condition: new, Year of construction: 2026, overall weight: 280 kg, total length: 23,740 mm, total width: 15,000 mm, total height: 20,750 mm, input voltage: 230 V, warranty duration: 12 months, About this machine: This machine comes with a 24-month warranty. Upon request, we can also supply you with a suitable loading ramp, a photoelectric sensor for black object detection, or the appropriate machine film! About this model: Our "Starter" pallet wrapper is a semi-automatic stretch wrapper, perfect for those who no longer want to wrap pallets by hand or are seeking an affordable backup unit. Our Vogel Starter is likely the most economical pallet wrapper produced in Europe, without compromising on quality. In contrast to our other pallet wrappers, the range of options on this model is limited, as our aim here was to design a highly standardized pallet wrapper that covers most applications at a cost-effective price. With three programs, you can set both the speed of the film carriage and the turntable, and choose between “cross wrapping” or “up only” wrapping. Top and bottom wraps can also be saved to each program. The brake tension is easily adjusted via the mechanical film brake. Access to the programs can be password-protected, allowing the operator to choose only from the saved settings. This model weighs 280 kg and is rated for loads up to 1200 kg. Our Starter pallet wrappers feature a 1500 mm turntable and can wrap pallets up to 2100 mm high as standard. Automatic pallet detection (using a photoelectric sensor) comes standard, as do adjustable top and bottom wraps. Should the wrapper need to be relocated, it can be easily lifted and moved with a forklift using the integrated fork slots. This model is our recommendation if you want to move away from manual wrapping and are looking for a robust machine made in Europe. Rcjdez E Ikvspfx Airjh About us: Business is about people – that is our conviction! A supplier delivers the goods you order – a partner does more: they help you find the best solution. They support you in achieving your goals! They also stand by your side when problems and challenges arise. That is our philosophy. For over 40 years and now in the 4th generation, we have been the partner to small and medium-sized enterprises when it comes to “stretch wrapping and adhesive bonding.” If you wish, we are happy to advise you on which pallet wrapper from our portfolio best fits your requirements!

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 500 kg, total length: 28,650 mm, total width: 16,500 mm, total height: 25,230 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This pallet wrapper is a new machine in stock. This machine comes with a 24-month guarantee. On request, we can also offer you a matching drive-on ramp, a photocell for black detection or the matching machine film! About this model: Our ProfilineLP is a semi-automatic stretch wrapper that guarantees absolutely consistent results thanks to up to 32 storable programs. programs guarantees absolutely consistent results and thus reliably excludes the "human factor". Rcodpfx Ajz E Ilmsiroh "human factor". As space-saving as a pallet wrapper with a horseshoe plate and as robust as a closed system system - these are the advantages of this machine in a nutshell! With the electromagnetic brake, the tension of the film can be precisely adjusted in the individual steps (foot winding, winding up / head winding / winding down) in the programs. programs. The programs also allow you to set how fast the film carriage and turntable run. and turntable run. Head wrapping, foot wrapping and the overlap of the film at the end of the pallet can also be of the film at the end of the pallet can be saved for each program. In this way, you can store individual programs for each individual programs for each wrapping pattern to achieve ever more perfect wrapping results. results. The programs can be password-protected so that the user can only can only choose from the stored programs. With a weight of 500 kg, this model is designed for loads of up to 1200 kg. Our Profiline LP has a 1650 mm turntable and can wrap pallets up to 2500 mm high as standard. 2500 mm high as standard. Automatic detection of your pallets (via photocell) is a matter of course as well as adjustable head and foot wrapping. This model is our recommendation if you have limited space but require a professional & robust pallet wrapper that can be optimally adapted to your needs. adaptable to your needs Would you like a higher mast, pre-stretching of the film or an automatic film section? Almost anything is possible with this machine! We would also be happy to configure this machine for you as a new machine with the options to suit your needs. About us: Business is done between people - we are convinced of that! A supplier delivers the goods you order - a partner can do more: he helps you find the best goods. He supports you in achieving your goals! They are also there to help you with problems and challenges! That is our conviction. For over 40 years and now in the 4th generation, we have been the partner of small and medium-sized businesses for all aspects of stretching and gluing. On request, we will also be happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: new, Year of construction: 2026, overall weight: 420 kg, total length: 28,650 mm, total width: 15,000 mm, total height: 25,800 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This pallet wrapper is a new machine in stock. This machine comes with a 24-month guarantee. On request, we can also offer you a matching drive-on ramp, a photocell for black detection or the matching machine film! About this model: Our Profiline is a semi-automatic stretch wrapper with up to 32 storable programs that guarantee absolutely consistent results. programs guarantees absolutely consistent results and thus reliably excludes the "human factor". "human factor". With the electromagnetic brake, the tension of the film can be precisely adjusted in the individual individual steps (foot winding, winding up / head winding / winding down) in the programs. programs. As part of the programs, you can also set how fast the film carriage and turntable run. and turntable run. Head wrapping, foot wrapping and the overlap of the film at the end of the pallet can also be of the film at the end of the pallet can be saved for each program. In this way, you can store individual programs for each individual programs for each wrapping pattern to achieve ever more perfect wrapping results. results. The programs can be password-protected so that the user can only can only choose from the stored programs. With a weight of 420 kg, this model is designed for loads of up to 1200 kg (optionally up to 2000 kg possible). Rcjdpfxoz E Iltj Airsh Our Profiline has a 1500 mm turntable and can wrap pallets up to a height of 2500 mm high as standard. Automatic recognition of your pallets (via photocell) is a matter of course as well as adjustable head and foot wrapping. If the wrapper wrapper is to be used at a different location in between, it can be easily moved by means of can be easily lifted and moved using a forklift truck. This model is our recommendation if you are looking for a professional & robust pallet wrapper for larger quantities, which can be optimally adapted to your needs. Would you like a larger plate, a higher mast, pre-stretching of the film or an automatic film section? Almost anything is possible with this machine! We would also be happy to configure this machine for you as a new machine with the options to suit your needs. About us: Business is done between people - we are convinced of that! A supplier delivers the goods you order - a partner can do more: he helps you find the best goods. He supports you in achieving your goals! They are also there to help you with problems and challenges! That is our conviction. For over 40 years and now in the 4th generation, we have been the partner of small and medium-sized businesses for all aspects of stretching and gluing. On request, we will also be happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: new, Year of construction: 2026, overall weight: 280 kg, total length: 23,740 mm, total width: 15,000 mm, total height: 20,750 mm, input voltage: 230 V, warranty duration: 12 months, About this machine: Rcedpfxoz E Ilyj Airjh This machine comes with a 24-month warranty. Upon request, we can also supply you with a suitable loading ramp, a photoelectric sensor for black object detection, or the appropriate machine film! About this model: Our "Starter" pallet wrapper is a semi-automatic stretch wrapper, perfect for those who no longer want to wrap pallets by hand or are seeking an affordable backup unit. Our Vogel Starter is likely the most economical pallet wrapper produced in Europe, without compromising on quality. In contrast to our other pallet wrappers, the range of options on this model is limited, as our aim here was to design a highly standardized pallet wrapper that covers most applications at a cost-effective price. With three programs, you can set both the speed of the film carriage and the turntable, and choose between “cross wrapping” or “up only” wrapping. Top and bottom wraps can also be saved to each program. The brake tension is easily adjusted via the mechanical film brake. Access to the programs can be password-protected, allowing the operator to choose only from the saved settings. This model weighs 280 kg and is rated for loads up to 1200 kg. Our Starter pallet wrappers feature a 1500 mm turntable and can wrap pallets up to 2100 mm high as standard. Automatic pallet detection (using a photoelectric sensor) comes standard, as do adjustable top and bottom wraps. Should the wrapper need to be relocated, it can be easily lifted and moved with a forklift using the integrated fork slots. This model is our recommendation if you want to move away from manual wrapping and are looking for a robust machine made in Europe. About us: Business is about people – that is our conviction! A supplier delivers the goods you order – a partner does more: they help you find the best solution. They support you in achieving your goals! They also stand by your side when problems and challenges arise. That is our philosophy. For over 40 years and now in the 4th generation, we have been the partner to small and medium-sized enterprises when it comes to “stretch wrapping and adhesive bonding.” If you wish, we are happy to advise you on which pallet wrapper from our portfolio best fits your requirements!

Year of construction: 2026, condition: new, The KVK 600 is ideal if you are looking for a mobile solution to stretch-wrap your packaged goods. Or if you have packaged goods that are too large or too heavy for a pallet wrapper with a turntable. With its electric steering, the KVK 600 can be easily moved to any corner of your warehouse. Its rechargeable battery is designed for 8 hours of continuous operation. Rodpfez E Iwpex Airsch The KVK 600 has a power stretch system with up to 300% stretch. This significantly reduces your film consumption, as 1 meter on the roll becomes 4 meters on the pallet. In addition, this system creates only minimal contact tension, so that even lightweight packaged goods can be wrapped easily. Up to 10 individual programs can also be saved for the KVK 600, in which you can specify for each step (foot wrapping, ascending wrapping, head wrapping and descending wrapping) how quickly and with what film tension they should be carried out. This allows you to store individual programs for each wrapping scheme in order to achieve ever more perfect wrapping results. The programs can be password-protected so that the user can only select from the stored programs. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. In addition to a photocell for the detection of dark packing goods or black film, a higher mast and a set of exchangeable battery and external charger are also available for the KVK 600. This model is our recommendation if you want to use your stretch wrapper on the move, or if you have pallets with excessive dimensions and value absolutely consistent results. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2025, operating hours: 1 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission4, Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm GMK (compass) The start and end of the winding is always identical Manual line formation Redpjz Inavefx Airsch Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23SFERA05, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Rcsdsz Induspfx Airsh Optionally available: -winding height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Condition: used, mileage: 64,000 km, power: 61 kW (82.94 HP), fuel type: gasoline, gearing type: mechanical, first registration: 06/2019, next inspection (TÜV): 06/2027, emission class: euro6, color: blue, number of seats: 2, Equipment: ABS, all wheel drive, * Sold on behalf of the customer * 1st owner * 2 seats * All-wheel drive * Trailer hitch * Roof rack * Front guard * Running boards * German vehicle Rodpfx As Ad Sm Ssirech WhatsApp: Errors and prior sale excepted!! Sale is made with the exclusion of all warranties!! - We speak Russian - We speak English - We speak Polish - We speak Romanian - We speak Spanish Additional features: 2-seater, exterior mirrors electrically adjustable and heated, both, electric windows front + rear, windshield laminated glass, rear window wiper, inner fender rear, inner fender front, body: 3-door, catalytic converter, luggage compartment cover, headlight range adjustment, alloy wheels, model update, engine 1.7 L - 61 kW CAT, wheelbase 2200 mm, rear seat foldable, low emission according to Euro 6 emission standard, protective film door sill, rocker panel protection strips, side impact protection, seat heating front, solid color paint, underbody protection

Condition: new, power: 352 kW (478.59 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel-air, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, parking heater, power mirror, retarder, soot filter, trailer coupling, - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - Bluetooth - High beam - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air-suspended seats - Air horn - Particulate filter - PTO (power take-off) - Radio/multimedia system - Reversing camera - Sun visor - Stability control - Auxiliary heater - Pre-heating automatic - Toolbox - Windscreen Internal number for customer inquiries: 1-521 (reference vehicle) MAN TGS 28.480 6x4-4 with special tipper body and EPSILON Q170L115 loading crane. Specifically designed for tree care applications. MAN TGS 28.480 6x4-4 BL: Driver Comfort Package Plus TGS Trailer package MAN D2676 LFAI diesel engine, 352 kW (480 hp) power, 2,400 Nm torque, Euro 6e Redpfxeylunrj Airjch Transmission: AN TipMatic 12.28 OD with Retarder 35 Transmission function: MAN EfficientRoll Transmission function: MAN Idle Speed Driving Transmission function: Rock-Free Mode 3rd axle steerable and liftable Suspension type: leaf/air (BL) on front axles and driven rear axles Daytime running light, LED Fog lights, H7 2 outline marker lights, LED Roof beacon, halogen, yellow, with function monitoring Work lights, LED, white MAN EasyControl operation panel, 4 functions, can be operated from outside when door is open Oil box, midsection, rearward MAN Mediasystem Navigation Advanced 7 inch MAN Soundsystem Advanced Tipper Body: Steel tipper body type 6024: - Dimensions: 5,954 x 2,381 x 2,538 mm / External height approx. 3,800 mm - Floor plate: 5 mm, HARDOX 450 - Side walls: 4 mm all round, HARDOX 450 - Front wall: 4 mm, HARDOX 450 Crane: EPSILON Q-Series Loading Crane - Q170L - EPSILON loading crane with high seat - Rated HC1/HD4/B4 - Lifting cylinder protection - Integrated operating hours counter and service interval display - Mounting hardware, surface treated against corrosion - Clamps 8x M30x1.5x1000 mm, mounting plates, nuts, protective caps QL97_1 - L-arm system 9.7 m, special conversion to QL11.50_1 - L-arm system 11.5 m - Double telescopic extension - Outreach: 11.5 m - CEH-N7_1 - CE wood package with N7 for the DE safety package wood - Compliant with EN12999 for timber cranes - 7° safety shutdown with tilt switch - Start-stop with emergency stop - RPM adjustment +/- - Seat heating Financing / hire purchase as well as leasing / partial amortisation leasing available through our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and modifications. General information Cab: Local traffic Technical information Number of cylinders: 6 Engine capacity: 12,419 cc Gross vehicle weight: 26,000 kg Axle configuration Brakes: Drum brakes Front axle: Tyre size: 385/65-22.5; Steered; Suspension: leaf suspension Rear axle 1: Tyre size: 315/80-22.5; Differential lock; Suspension: air suspension Rear axle 2: Tyre size: 385/65-22.5; Lift axle; Steered; Suspension: ...

Condition: new, functionality: fully functional, Year of construction: 2026, MTP 3000 W handheld laser cleaning machine – Metal Technics Polska Remove rust, paint, oil, oxides and coatings in seconds – with no abrasives, no chemicals and no damage to the base metal. The MTP 3000 W is a mobile continuous-wave fibre laser cleaning machine with a handheld cleaning gun, built for workshops, metal fabrication, tool and mould shops, restoration and pre-weld surface preparation. KEY ADVANTAGES • 3000 W laser power for fast cleaning of large surfaces • Dry, contactless process – no consumables, no blasting media, no waste chemicals • Cleans rust, paint, oil, oxide layers and fouling without damaging the parent metal • Works on cast iron, carbon steel, stainless steel, die steel and aluminium • Colour touchscreen with selectable scanning (swing) mode, red guide light and laser control • Key switch, emergency stop and dedicated Power / Light / Control / Laser / Beam buttons • Fibre laser source with armoured fibre cable and lightweight handheld cleaning gun with protective lens • Compact cabinet on four castor wheels – easy to move around the workshop TYPICAL CLEANING PERFORMANCE (manufacturer data) • Cast iron, severe corrosion (0.08 mm): focus depth >35 mm, 18–30 m²/h • Carbon steel plate, moderate corrosion (0.05 mm): >40 mm, 15–24 m²/h Rcedpsz Izlrjfx Airoh • Stainless steel plate, oil stains and slight rust: >50 mm, 18–30 m²/h • Die steel gear, oil with iron filings: >45 mm, 14–23 m²/h • Aluminium plate, oxide / surface fouling: >35 mm, 12–20 m²/h • Paint removal, baked white varnish (0.1 mm), no putty layer: >20 mm, 18–30 m²/h Condition: new, year of manufacture 2026. Power supply: 400 V or 230 V – available in either version. Availability: made to order, delivery lead time 90 days. Terms: EXW Sokołów Podlaski, Poland. 12 months warranty on parts. Documentation and manual included. Delivery to any address in Europe can be arranged with our own transport company – delivery quote on contact. Technical advice and after-sales support from Metal Technics Polska.

Condition: used, HELMUT FISCHER X-ray fluorescence measuring device / coating thickness measuring device FISCHERSCOPE X-RAY XDL-XYZpT8 Professional X-ray fluorescence measuring system for coating thickness and material analysis For sale is a used X-ray fluorescence measuring device from the manufacturer Helmut Fischer GmbH + Co. KG, Germany. The FISCHERSCOPE X-RAY is suitable for non-destructive coating thickness measurement and material analysis using X-ray fluorescence (XRF). The system is designed for measurements of functional coatings, corrosion protection coatings and various metallic coatings and is used in quality assurance, laboratories, research and manufacturing. Technical data: Manufacturer: Helmut Fischer GmbH + Co. KG Model: FISCHERSCOPE X-RAY Type: XDL-XYZpT8 Serial number: SN010002436 Made in Germany CE marking present Measuring system: X-ray fluorescence measuring device (XRF) For non-destructive coating thickness measurement Suitable for functional coatings and corrosion protection coatings Large measuring chamber with C-slit Standard X-ray tube Proportional counter Fixed aperture and fixed filter DCM travel 0–80 mm Electrical data: Supply voltage: 230 V AC Frequency: 50–60 Hz Power consumption: 120 W Connections: Mains connection Serial interface (Sub-D) Other connections as shown in the pictures Equipment: Helmut Fischer FISCHERSCOPE X-RAY measuring device Measuring chamber with protective cover Software Operating manual Other accessories as shown in the pictures Application areas: Coating thickness measurement Material analysis X-ray fluorescence analysis (XRF) Quality assurance Electroplating Surface technology Material testing Laboratory Research and development Scope of supply: Helmut Fischer FISCHERSCOPE X-RAY XDL-XYZpT8 Software Operating manual Scope of supply as shown in the pictures Condition: Used The device comes from a warehouse clearance. Optical condition as shown in the pictures. Important note: The device has not been tested by us and is explicitly sold untested and without warranty. The table shown in the photos or other items not explicitly mentioned are not part of the sale. Due to its size and weight, shipping is possible by forwarding agent. Rcjdez Egi Ropfx Airsh Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.