Used Corrosion Protection Film for sale (14,478)

Condition: used, maximum load weight: 44,420 kg, overall weight: 53,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 08/2027, Equipment: ABS, You can find our complete vehicle inventory with immediately and shortly available vehicles on our website. Excerpt from the equipment: Complete equipment upon request. Loading platform: * with approximately 30 mm thick hardwood flooring * 9 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 10 pairs of pole pockets in the outer frame of the loading platform for plug-in poles, approximately 100 x 50 mm Fifth wheel: * Hydraulic fifth wheel Tires: * 385/65 R 22.5 - MICHELIN MULTI High Load 164K * TPMS: TPMS tire pressure monitoring system according to ECE R 141 * Data transmission to the tractor unit is carried out via the standardized EBS interface according to ISO 11992 * For correct display, the tractor unit must be able to transmit and display this data. Axles and suspension: * BPW axles, technically 10,000 kg each * first axle hydro-mechanically steered * second axle fixed and third axle hydro-mechanically steered * mounted on a turntable * Air-suspended with lifting and lowering valve Braking system: * WABCO braking system according to EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Electrical system: * according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15 pole connection according to ISO. 24N ISO-1185 24S ISO-3731 * 15 pole ISO-12098 Steel construction: * made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) * S690QL/S700MC (yield strength 690 MPa) Painting: * Complete steel construction blasted automatically with a shot blasting system after welding * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat, solid color in RAL 9005 deep black according to the RAL 841GL system * Rear part metallized and painted in RAL 9010 (pure white) * Rims in silver-grey, paintwork tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Included accessories: * Loading platform with approximately 30 mm thick hardwood flooring * 2 inch king pin, one galvanized steel front wall (EN12642-XL), approximately 1,200 mm high * On the galvanized connection bar at the front, DUOMATIK air couplings * Storage for approximately 1,000 mm plug-in poles, at the rear in the center beam * On the swan neck and at the rear panel, left and right, one bracket each for the warning signs including socket * White reflector tape according to EU regulations, red on the side and at the rear * 10 pairs of pole pockets for plug-in poles, approximately 100 x 50 mm, in the outer frame of the loading platform * European reflector signs (red-yellow) at the rear of the trailer * One bracket for a rotating beacon at the rear of the trailer * One mud flap at the rear of the trailer, manual and description on a USB stick * Central lubrication system BEKAMAX (Pico) with normal grease NLGI-2 and removable protective cover around the pump * 4 pieces of chocks with holder on the front wall, rear steering from front and rear by means of a cable remote control with push buttons * with single-axle control (without installation in the tractor unit) * Electro-hydraulic unit, 6 pairs of galvanized plug-in poles, approximately 100 x 50 mm, approximately 1,000 mm high Bdodpfx Ane Aauphjdoi * 5 pairs o

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21001013056, empty load weight: 3,290 kg, maximum load weight: 9,800 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 05/2023, next inspection (TÜV): 03/2027, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 1,060 mm, total length: 9,690 mm, total width: 2,550 mm, total height: 3,580 mm, suspension: air, tire size: 235/75 R17,5", color: yellow, Please note: the images are archive photos. The vehicle may be in use! #Chassis centre-axle trailer - Fine-grain steel welded construction - Outer frame slightly inclined, new design with "Load-Lock-Profil" for lashing straps - 1 pair of geared landing legs at front, straight lower section, one-side operation on the right in direction of travel - Side door stays, steel underrun protection - Anti-spray mud flaps on last axle only, rear impact protection - Spare wheel carrier (1 wheel) with fastening kit - Platform height 1060 mm #Towing equipment - Drawbar with approved 40 mm drawbar eye, haulage version - Drawbar height mechanically adjustable via threaded spindle, below floor level, max. range 200 mm - Drawbar length mechanically adjustable approx. 1950 - 2300 mm, lockable approx. every 50 mm, set to approx. 2100 mm #Axles + suspension - BPW axles at manufacturer's choice, tapered roller bearings, S-cam brakes - Axles/running gear laser-aligned: reduces tyre wear and fuel consumption - Air suspension #Braking system - 2-line compressed-air braking system, colour-coded lines for easy servicing, spring-brake parking brake - Duomatic connection at front, with connecting line to the truck - EBS, electronic braking system with EBS connector at front - Please note: only to be towed by vehicles ensuring ABS effectiveness! - Raise/lower valve, vehicle stability system #Wheels and tyres - 235/75 R17.5, make at manufacturer's choice, steel rims, factory silver #Electrics - 24 V, multi-chamber lamps - Yellow LED side lighting, also coupled with indicators (flashing side marker lights) - 2 white front position lights, 2 white/red outline marker lights at rear - 1 x 15-pin connector at front - 2 additional LED work lights at rear, switched via reversing light #Floor - Film-faced plywood approx. 30 mm, for high point loads - Premium floor sealing, floor jointed all round - Platform length approx. 7,300 mm #Front wall / front corner posts - Through-loading via double-leaf front portal doors, each with 2 internal cam bar locks - Steel corner posts, release device for side tarpaulin - Bridge plate approx. 2,400 mm wide, divided once, approx. 350 mm long for resting on tail lift, capacity approx. 1,800 kg, incl. tail lift support - (Drawbar length then approx. 2300 mm; with 2000 mm tail lift, coupling set-back on truck min. 20 - max. 240 mm) #Side boards - 25 mm aluminium hollow profile, 400 mm high, drop-down and removable #Centre stanchions - 1 pair of sliding stanchions, movable along entire length #Insert slats - Wooden insert slats #Rear wall / rear corner posts - Steel corner posts up to lower edge of roof - Tarpaulin attachment with round tube and tensioning ratchet Bedpfxj Afwuzj Andsdi - Double-leaf rear portal doors, each with 2 internal cam bar locks #Tarpaulin - Tarpaulin with welded-in horizontal and vertical straps, stainless steel tensioning buckles - Customer lettering Dachser on side tarpaulins and rear portal #Roof - Fixed roof with tarpaulin and roof bows, tarpaulin colour: white - Optimised rain gutter at rear on end bow, above doors #Country of registration / plates - Germany, Dekra inspection and expert report (§13 EG-FGV) - Fliegl manufacturer's certificate for body strength acc. to EN 12642 XL

Year of construction: 2023, condition: used, New demonstration machine! List price €1,999 net. Maximum, robust equipment and the best quality at an attractive price. Fully automatic on/off operation. Equipped with all safety devices. Completely ready for connection. High-quality electric motor with high starting torque is equipped with a motor protection switch. Starting capacitor and starting relief valve ensure easy starting. Standard equipped with a phase inverter for easy manual reversal of the direction of rotation. Compressed air generation via a high-performance HOS unit. The starting relief valve ensures easy and pressure-free starting. The two-cylinder high-performance unit made of cast iron and the low speed guarantee particularly smooth and low-vibration operation and a long service life. This ensures an even longer service life due to even less wear. High-quality compressor with optimal lubrication for a long service life and high reliability. Equipped with a high-quality intake filter. The aftercooler with large cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air, which protects the pneumatic tools. Additionally equipped with an intercooler to the aftercooler. Corrosion-free valve plates for improved heat dissipation and durability of the compressor. The large fan wheel and a cooling air deflector on the cylinder ensure optimal cooling of the compressor. A stable metal belt guard provides optimal protection of the components and high user safety. Compressed air supply to the tank via a flexible armored hose with heat protection prevents vibrational breakage. Powerful and efficient drive. The toothed drive belt facilitates starting, improves smooth running and power transmission, and reduces power consumption by up to 30%. Stable metal belt guard. Operation at the service unit. Equipped with a high-quality CONDOR pressure switch MDR 5 with a robust push-button function for fully automatic on/off operation. Filter pressure regulator for stepless adjustment of the working pressure, while simultaneously separating dirt, oil and condensate. Two large manometers indicate the tank and working pressure. Air outlet at the service unit via a comfortable safety quick coupling. Only fixed screw connections at the service unit, no hose connections. Two compressed air outlets. One compressed air outlet for filtered compressed air. One compressed air outlet via a direct outlet on the tank with a ball valve. Comfortable safety coupling - the advantages. Comfortable safety couplings from AIRCRAFT, the first manufacturer to use them as standard. Two separate locking systems for maximum work safety. Prevents dangerous whipping of the hose line. Comfortable and safe to transport and set up. Ergonomically extended handle for comfortable transport in an almost upright position - lifting stress on the back is avoided. Puncture-proof PU foam wheels and a stable steering chassis with parking brake enable easy transport. The parking brake prevents both rotational and rolling movement of the wheels and ensures an optimal position of the compressor. With a practical second transport handle on the tank, which makes it easier to carry the compressor. Technical data: Intake capacity approx. 850 l/min. Filling capacity approx. 680 l/min. Maximum pressure 10 bar. Tank capacity 100 l. Number of compression stages 2. Compressor speed 1240 min-1. Sound power level Lw 95 dB. Bodj Agch Espfx Andodi

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The versatile all-rounder combines outstanding workmanship with a broad range of applications. Our machine also offers intuitive operation, optimizing your packaging processes. A high-quality unwind unit with double automatic roll centering ensures precise material guidance. Furthermore, our active material feed system guarantees optimal web tension for flawless packaging results. The highly efficient brushless motors and user-friendly color touchscreen control system provide maximum flexibility during format changes, significantly simplifying your packaging operations. The machine is equipped with memory storage for machine parameter settings and can save up to 50 different products. For this packaging line, we also offer fully and semi-automatic feeding solutions, which can be retrofitted upon request. The machine is available with either left- or right-hand operation and features a rotary cross-sealing unit with an electronic overload protection switch for maximum safety. Thanks to its performance, versatility, and technological advancement, our machine is ideally suited for packaging food products such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift items. If you are looking to optimize your packaging processes with high production capacity and superior quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end sealing, single sealing jaw 5. Robust central fin seal structure 6. Four servo drive controls - Active material feed shaft - Central sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. Housing made of stainless steel 304 10. Documentation in the local language 11. Print mark control 12. Programmable bag length or fully automatic product length detection 13. Standard direction: left to right Technical Parameters Bdjdpfx Anowld Upodji 1. Product length: L120–500 mm 2. Product width: W30–200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 100 products/min (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1Ph. 220V 50Hz 7. General power: approx. 4.8 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4280 x 1200 x 1230 mm

Year of construction: 2026, condition: new, Sandblasting cabinet for clean blasting operations without contaminating the working environment. Suitable for various blasting media, e.g., quartz, glass beads, plastic beads, etc. Ideal for cleaning, derusting, or removing paint from metal parts of all kinds, e.g., engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are securely attached to the housing. A viewing window with an attached protective film provides optimal visibility and work safety during workpiece processing. Dust-free operation due to all-round seals on the lid and door frame. A sturdy support grid allows workpieces to be placed inside the cabinet. With a drain opening for changing the blasting media. Suction pipe for the blasting media attached to the bottom of the collection container. With compressed air connection on the outside. 2 large side doors for loading and unloading from both sides, even for longer workpieces. Integrated extraction system with replaceable air filter. Airflow is controlled via a foot pedal. 2 blasting guns: one fixed and one freely movable blasting gun. Bdjdpfocqm Rrsx Andsi 3 separate switches for on/off, extraction, and cabinet lighting. 2 fluorescent tubes (230 volts), in a separate housing with a protective screen and replaceable protective film, including 5 replacement films. Working pressure is regulated via a pressure regulator with a pressure gauge. Scope of delivery: High-quality blasting gun with ceramic nozzle. 4 ceramic nozzles (4 / 5 / 6 / 7 mm). Includes 5 replacement films for the viewing window. Technical data Working cabinet volume: 310 l Air consumption: 200 - 350 l/min Working pressure: 2.8 - 8.0 bar Compressed air connection: 3/8" Blasting media particle size: 0.42 - 0.125 mm Internal dimensions: 945 x 605 x 605 mm External dimensions: 960 x 900 x 1640 mm Weight Max. working pressure: 8.6 bar Location: Arriving at warehouse 54634 Bitburg.

Year of construction: 2026, condition: new, Sandblasting cabinets for clean blasting operations without contaminating the work environment. Bedocqm Rwopfx Andjdi Suitable for various blasting media, e.g., quartz, glass beads, plastic beads, etc. Ideal for cleaning, derusting, or removing paint from metal parts of all kinds, e.g., engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are securely attached to the housing. A viewing window with an attached protective film provides optimal visibility and work safety during workpiece processing. Dust-free operation due to seals around the lid and door frame. A sturdy support grid allows workpieces to be placed inside the cabinet. With a drain opening for changing the blasting media. Suction pipe for the blasting media attached to the bottom of the collection container. With a compressed air connection on the outside. Very large, upward-opening front flap with gas springs for quick and easy loading and unloading. Integrated extraction system with a replaceable air filter. Blasting gun without finger trigger – airflow is controlled via a foot pedal. 4 fluorescent tubes (230 volts) in a separate housing with a protective cover and replaceable protective film, including 5 replacement films. 2 separate switches for extraction and cabinet lighting. Adjustment of the working pressure via a pressure regulator with a pressure gauge. Crossbars on the base allow for easy transport with a pallet truck. Scope of delivery: High-quality blasting gun with a ceramic nozzle. 4 ceramic nozzles (4 / 5 / 6 / 7 mm). Includes 5 replacement films for the viewing window. Technical data Volume of work cabin: 825 l Air consumption: 400 - 800 l/min Working pressure: 3.4 - 8.0 bar Compressed air connection: 3/8" Blasting media particle size: 0.42 - 0.125 mm Internal dimensions: 1160 x 870 x 850 mm External dimensions: 1180 x 900 x 1760 mm Weight Max. working pressure: 8.6 bar Location: Arriving at warehouse 54634 Bitburg.

Condition: used, Ultrafilter ultraaqua autoclean 0016 AC Donaldson Ultrafilter ultrafiltration system for compressed air compressor condensate Oil/water separator for compressed air condensate ● Treatment system for separating compressed air condensate and condensates with difficult separation properties (e.g., stable emulsions) using cross-flow filtration. ● Physical separation principle guarantees residual oil content of < 5 mg/l in water. ● Intelligent control concept with programmable controller for safe system operation, including plain text display via a text display, fault monitoring via alarm messages with potential-free contacts, and optional external network connection. ● Optimized cleaning through comparison of input/output extends cleaning intervals and saves operating costs. Bdjdpfeidx Uijx Andsi ● Thermally and chemically highly resistant ceramic membrane with a long service life. ● Frost protection with integrated heating. ● High-quality, corrosion-resistant materials for tanks, pipelines, pumps, seals, and valves. Manufacturer: Donaldson Ultrafilter System type: ultraaqua autoclean 0016 AC Electrical data: 3 x 380 V, 50 Hz, 2.6 kW Compressed air: pmin: 5.5 bar, pmax: 8.5 bar, Pneurop 4 Water: pmax: 5 bar Membrane: pHmin: 1, pHmax: 11, tmin: 5°C, tmax: 70°C You can find other filtration systems in various sizes – new and used – in our shop! International shipping costs available upon request!

Condition: refurbished (used), 100 m³ / 100,000 l fire water tank according to DIN 14230 Tank volume: 100,000 liters / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight: approx. 16,300 kg Material: Steel grade S 235 JRG 2 Underground tank for underground storage, single or double-walled, suitable for areas that can be walked or driven on (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blank cover, seal, and screws. New or used, immediately available! The container has been emptied, cleaned, overhauled, and tested for leaks by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire brigade coupling / fixed coupling A according to DIN 14319, design B, without a gauging port. - Ventilation flange stub with a cap, overall length approx. 1,300 mm, suitable for 800 mm soil covering and 500 mm above the ground. - Externally coated with bitumen for protection. - On request, we can coat the tank with an internal coating based on bitumen or epoxy resin (against corrosion). - It is also possible to line the container with a plastic inner liner. A cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will promptly receive the exact freight costs. Inspection is possible at any time by prior appointment. If you require any further information, please call us or send us an email to b.barth(at)barth-tank.de Bdodpfx Aohh Suhendei We can accept and purchase tanks/containers of all types; please contact us for details. We also have the following sizes in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters.

Condition: used, Year of construction: 2005, operating hours: 45,000 h, machine/vehicle number: LC514, Used Bottling Line SIDEL for still water up to 12000 bph Main features of the bottling line The used SIDEL bottling line for still water up to 12000 bottles per hour delivers high standards of productivity and precision. Moreover, the system produces 12000 bottles per hour, making it suitable for medium high production capacities. The line processes PET containers, handling formats ranging from 0.33 L to 1.5 L. Additionally, this line applies a volumetric filling system, ensuring accurate dosing for each bottle. It supports containers with neck types between 25 and 29 mm, thereby improving compatibility with various market standards. Furthermore, the system exclusively processes still water, maintaining a specific and dedicated production flow.  Details of the equipment in the Used Bottling Line SIDEL for still water up to 12000 bph The Sidel SBO 8 blow molding machine, manufactured in 2005, forms the bottles at the core of the process. Notably, this machine transforms preforms into finished bottles using high pressure compressed air. Therefore, SIDEL technology ensures precise shaping and optimizes PET material usage, minimizing waste. Filling Monoblock The Sidel 36 36 9 filling monoblock, also from 2005, performs rinsing, filling, and capping in a single compact unit. This design maximizes space efficiency and reduces transfer times between stages. Consequently, the volumetric filling system delivers precise dosing, which ensures the final product quality. Labeling Machine The PE Labellers ROLLMATIC labeling machine, from 2005, applies wrap around labels to containers. Advanced technology positions labels accurately, thus enhancing the finished product appearance. This system works perfectly for PET water bottles, meeting the line speed and quality requirements. Shrink Wrapper The Sidel Cermex shrink wrapper, from 2005, performs secondary packaging. Specifically, the machine uses shrink film to create compact and secure packs. As a result, this process enhances logistics and product distribution while protecting items during transport. Conveyors in the Used Bottling Line SIDEL for still water up to 12000 bph The line operates with a complete system of conveyors, both air and ground. These conveyors maintain a continuous and uninterrupted flow between production stages. Additionally, the conveyors minimize downtime and ensure high operational efficiency. Technical advantages of the line Bdedpsvgva Uefx Andji This used bottling line delivers reliability and robustness, even with its 2005 manufacturing date. Moreover, all machines ensure a long operational life and reduce maintenance costs. The system efficiently bottles still water, ensuring a specific and contamination free process. Furthermore, SIDEL machinery integrates seamlessly with complementary components, such as the labeling machine and shrink wrapper, to maintain a uniform production flow. With a speed of 12000 bottles per hour, this line supports companies with consistent production demands. Conclusion The used SIDEL bottling line for still water up to 12000 bottles per hour provides a reliable and highly efficient solution for the bottling sector. Therefore, with robust machinery and an optimized configuration, it meets the needs of technicians and experts requiring a complete solution for producing PET water bottles.

Condition: used, Cole Parmer Vacuum Oven The Cole-Parmer vacuum ovens are designed for drying under carefully controlled conditions – normal atmosphere, vacuum up to 30" Hg, or inert gas atmosphere. The oven is suitable for drying, vacuum embedding, electroplating, and processing electronic components. Non-corrosive, non-flammable gases such as nitrogen and carbon dioxide can be used in the oven. All controls and connections (except for power) are located on the front in a vertical panel. The illuminated power switch, vacuum gauge, temperature controller, vacuum control valve, and nickel-plated brass hose connections are located on the front for convenient operation. Bsdpfjwxxgajx Andodi The radiant heat from the heated wall, without exposed heating elements, ensures uniform heat and maximizes the internal volume. The temperature is controlled by a hydraulic thermostat. The vacuum values are precisely regulated between 0 and 30 inches of mercury. The silicone door seal ensures a tight seal at all vacuum levels. A window made of high-strength tempered glass, fully protected by a safety grille, provides a full view of the oven contents. The two aluminum shelves conduct heat well to the samples. The shelves can be easily removed. The continuous wool insulation ensures a uniform temperature. Manufacturer: Cole Parmer Model: 5053-12 Power: 600 W Voltage: 240 V Dimensions: 510 x 420 x 1200 mm Chamber: (H x W x D) 254 x 254 x 305 mm (19.8 liters) Thermometer Bimetallic, dial type; range from 0 °C to 300 °C in 5 °C increments You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, 25.80 Meter Nagy PB-80 Pallet Rack Manufacturer: Nagy Type: PB-80 Rack length: 25800 mm Upright height: approx. 10300 mm Upright depth: approx. 1100 mm Upright type: PB-80 Profile: 80 x 60 mm Frame: bolted Upright surface: galvanized Clear bay width: 3600 mm Crossbeam: 3600 x 120 x 45 mm Crossbeam surface: blue painted (RAL 5015) Number of bays: 7 Number of levels: 7 incl. ground level Max. pallet weight: 500 kg Permissible shelf load: 2000 kg Permissible bay load: 12000 kg Pallet spaces: 196 Scope of supply 08 x Upright 10300 x 1100 mm, galvanized 84 x Crossbeam 3600 x 120 x 45 mm, blue Technical summary Uprights: 10300 x 1100 mm, profile 80 x 60 mm, galvanized, bolted frame. Crossbeams: 3600 x 120 x 45 mm, blue (RAL 5010), 4 Euro pallets per level. Material & Design: The galvanized surface provides long-lasting corrosion protection. The bolted frame (diagonal and transverse bracing) allows for the easy replacement of individual components in the event of damage (e.g., from forklift impacts), unlike welded frames. Profile: The profile dimension of 80 x 60 mm is a typical dimension for medium to heavy pallet rack uprights to ensure the necessary buckling resistance at over 10 meters in height. With standard pallet heights (1.20 m), you can install 6 crossbeam levels in the 10.3 m high rack. Together with the storage spaces on the ground, this results in 7 storage levels stacked on top of each other, which, with 4 pallets per level, results in a total of 196 pallet spaces. Your partner for safe warehouse logistics: Assembly, disassembly & rack inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are installed professionally and meet all safety standards. As experts in warehouse technology, we offer you everything from a single source: Assembly & Disassembly Whether it's a new installation, a modification, or a warehouse dismantling - we take over the professional assembly and disassembly of your systems: - Pallet racking (heavy-duty & standard) Bdodoyvrxkspfx Andoi - Shelving for small parts and archives - Warehouse platforms for optimal space utilization Rack inspection & inspection according to DIN EN 15635 Safety is a legal obligation. We carry out the annual expert inspection (in accordance with DGUV rule 108-007): - Inspection for deformations and damage. - Check of safety pins and load plates. - Creation of a legally valid test report including test label. "Everything from a single source: We would be happy to offer you a suitable bank financing for your project." You can find more articles - new and used - in our shop! International shipping costs on request!

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 30, SLIDING RACK FOR GLASS M80-30 MANUFACTURED IN 2026/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. Bdsdpfx Aoha E S Tjndji M80-30 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -30 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 436 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 27 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 27000 kg Partitions inclination – left or right – depending on assembly Assembly time - 14 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-30 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 10, warranty duration: 12 months, SLIDING RACK FOR GLASS D220-10 MANUFACTURED IN 2026/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Our sliding racks have the form of slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack in various parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. D220-10 RACK TECHNICAL DATA Intended use – glass panes 321 cm x 255 cm in wooden boxes Possibility of storing single panes – YES Maximum box size – 345 cm x 275 cm Number of partitions – 10 The width of the storage strip for glass – 22 cm The length of the storage strip for glass – 395 cm The material on which glass is placed – steel supports coated with ash tree strips (5 pieces) Total height (A) – 335 cm Total width (B) – 368 cm Total depth (C) – 407 cm Space needed for the correct use of the rack – 29 m2 Requirements for the ground – smooth / levelled The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 full / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single drawer – 2 500 kg Permissible load-bearing capacity of the whole rack – 25 000 kg Partitions inclination – left or right – depending on assembly Assembly time - 7 hours The number of people required for assembly – 4 people Drawers – joined (in order to reduce transport costs) Loading the box with glass onto the drawer – gantry, forklift, HDS DOCUMENTS ATTACHED TO D220-10 RACK - User’s Manual - Assembly Instructions Bedpfx Anjhcipgododi - Rating plate - 12 months’ warranty This product is delivered in parts in order to minimise delivery costs. We also deliver our racks to the EU countries and other countries.

Condition: new, axle configuration: 2 axles, loading space length: 62,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 385/55-22,5, wheelbase: 4,140 mm, color: black, = Additional options and equipment = - LED lighting - Air suspension = Notes = Internal reference number for customer inquiries: 1-673 PAVIC HTA18 62E, 2-axle lightweight short timber trailer with single tires. The trailer is available in three different lengths: 5,800 mm 6,200 mm 6,600 mm 4x OPTIPA SL bolster base assemblies 8x OPTIPA AL10 aluminum stanchions Approx. unladen ride height: 1270 mm Approx. wheelbase: 4140 mm Approx. front overhang: 710 mm Air suspension Safety cables for air suspension Bsdpfx Aneyl Tm Tedjdi 2 x 10t SAF CD axles OFF ROAD Tires front/rear: 385/55R22.5 on steel rims (also available with aluminum rims at extra cost) DuoMatic quick coupling EBS - ABS Wabco smartboard Signal lamp system at the front for recognizing max. airbag pressure LED multifunction rear lights 4 x LED work lights with protective cover KTL coating for maximum corrosion protection 6 welded ring lashing points per side Movable grabber at the front with 20 mm steel cable Shunting coupling at rear Turntable with double ball race Financing is available through our various financing partners. For further questions, our sales team is happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and changes. = More information = Tire size: 385/55-22.5 Brakes: Disc brakes Suspension: Air suspension Front axle: Steered GVW: 18,000 kg Body brand: PAVIC short timber bolster OPTIPA SL Overall condition: very good Technical condition: very good Visual condition: very good

Condition: used, mileage: 55,000 km, power: 390 kW (530.25 HP), first registration: 06/2025, fuel type: diesel, overall weight: 18,000 kg, gearing type: automatic, emission class: euro6, Equipment: soot filter, Vehicle number: 550025 1st owner, accident-free, service book maintained, non-smoker ---- ASSISTANCE SYSTEMS * Lane Change Warning System EXTERIOR * Sun visor, exterior OTHER EQUIPMENT * ZF Intarder Additional Features Bdsdpfx Aney Tgqpodei -----Color/Paintwork----- Chassis color: Anthracite gray * Cab color: E1980WHTE CRYSTAL WHITE -----Tires/Wheels----- Goodyear * RR, not applicable * Front axle(s): 385/55R22.5 * Aluminum Alcoa Dura-Bright 32 mm * F1,385/55R22.5GO EQMS 160/150 K Steering BBA 3P * R1,315/70R22.5GO EQMDU 154/150 L Traction ABB 3P -----Equipment/Special Equipment----- XG+ cab * Cab air-suspended * Adaptive Cruise Control with FCW and AEBS-3 * Front: 8,00 t, parabolic, 163N * Emission class Euro 6 * OBD-E engine H6, fuel B7 * Automated transmission, TraXon, 12 gears * Wheelbase 4.00 m / rear overhang 0.99 m * Standard component arrangement * Horns, 2 sets * Headlights with height adjustment * LED skylights, additional LED lights, cab roof, pre-wiring * Two LED headlights for cab rear wall * Windshield with sun protection film * Laminated glass with sun protection film * DAF Corner View * Central locking, 3 keys, 2 remote controls * Side fenders, extended. Both sides foldable * Side skirts with extension on upper/lower side * Door panel: Leather * Driver's seat: Xtra Leather Air * Driver's seat, swivel pedestal * Passenger seat: Cinema & table, leather upholstery * Refrigerator and drawer * Mattress with mattress topper for DAF Relax Bed * Curtains with partition curtain * LED interior lighting: Exclusive * Stand-alone air conditioning, integrated * Roller blind, passenger side * Auxiliary power supply: Standard + 2x 40 A * ECAS remote control with extended functions * FMS connector, extended and pre-wired * PACCAR Connect with navigation and tablet software * Digital tachograph, VDO 1C, version G2V2 * Speed limiter set to 90 km/h * DAF Info Exclusive pre-wiring, Exclusive speakers * Antennas: Radio, 2x mobile phone, GNSS Extra: CB * Rear: Air suspension SR1347 * Rear axle 1, 13000 kg, load capacity index 149 * Axle load monitoring * MX-13 engine, 390 kW/530 hp, cab emblem: 530 * ECO performance * 12-speed TraXon transmission 12TX2620 DD, 16.69-1.00 * Rear axle ratio 2.40 * Mechanical differential lock * Compressor 2-cylinder without clutch * EAS unit right, . h. Overh. 85-l-AB fender left * Compressed air tank made of aluminum * 1185-l-Al fuel tanks: 845 stage left + 340 right, H 620 mm * Fuel tanks left and right * Catwalk with step, extra long * One wheel chock * SAF S36-20, cast iron, 150+40mm, low maintenance * Fixed wired body signals and warnings * Fixed control transmission secondary drive, no 1st transmission secondary drive * Generator 150 A, batteries 2 x 210 Ah AGM * Technically permissible GVW chassis weight max 19500 kg * Maximum ambient temperature 45 degrees * Garantie Plus vehicle - 3 years - 500,000 km * Extended maintenance interval * Standard tool kit * Standard fuel quantity + 30 liters * Executive package XG/XG+ * Climate package ---- Subject to prior sale and errors. The vehicle description serves only for the general identification of the vehicle and does not constitute a guarantee in the legal sense of purchase. You will receive the exact scope of equipment from our sales staff. Please contact us.

Condition: used, Year of construction: 2004, machine/vehicle number: FA57, Used Shrink Wrapper MIMI – Overview This used MIMI shrink wrapper is engineered for grouping and overwrapping PET bottles into stable retail-ready bundles on a modern bottling line. Designed for industrial packaging and beverage production, it delivers dependable second hand performance with efficient film-only bundling. The machine is configured for straight infeed handling of round bottles and supports multiple pack patterns without cardboard backing, making it a versatile choice for high-throughput packaging operations. Built for continuous-duty operation, this shrink wrapper is well-suited to integrate into existing bottling equipment and packaging machinery. It is a strong fit for beverage production environments where consistent pack quality, format flexibility, and reliable throughput are essential. With compatibility for common PET bottle sizes and standard pack matrices (3×2, 2×4, 3×4), it helps reduce material consumption by eliminating trays or pads while maintaining pack stability after heat shrinking. Technical Specifications & Performance Data Manufacturer: MIMI Machine type: Shrink Wrapper Year of manufacture: 2004 Capacity: up to 6,000 bottles/hour or 100 packs/hour (depending on pack configuration) Bottle sizes supported: 0.33L, 0.5L, 1.0L, 1.5L Container types: PET bottles Pack configurations: 3×2, 2×4, 3×4 (trayless, no cardboard backing) Infeed orientation: Straight infeed for round bottles Advanced Automation & Control Systems Bodpoxurm Asfx Andsdi The machine is designed for inline, conveyor-fed operation typical of automatic shrink wrapping systems. Standard industrial protections and operator interfaces support routine adjustments and format changes. Exact PLC/HMI, electrical ratings, and power data are not specified in the available documentation. Production Line Integration Capabilities This shrink wrapper integrates smoothly with upstream and downstream bottling equipment, including conveyors from fillers, labelers, and pack conveyors to palletizing. The straight infeed accommodates round PET bottles and allows quick transitions between pack matrices. Its trayless film bundling reduces material handling and simplifies logistics while maintaining pack integrity after the shrink tunnel. Machine Condition & Maintenance History The machine was removed from service in 2019 and is currently not in active production. It is offered as a second hand unit suitable for recommissioning. Specific maintenance logs and operating hours are not provided in the available documentation. Operational Performance & Versatility Optimized for PET bottles, this shrink wrapper covers the most common beverage bottle sizes from 0.33L through 1.5L. Its ability to produce 3×2, 2×4, and 3×4 bundles without cardboard backing supports cost-efficient industrial packaging while preserving good pack stability following shrinking. The straight infeed for round bottles enhances handling reliability and reduces changeover complexity. Installation Requirements & Site Preparation As with most shrink wrappers, installation typically requires a stable, level foundation, adequate f...

Condition: new, functionality: fully functional, power: 330.97 kW (449.99 HP), axle configuration: 6x6, fuel: diesel, gearing type: automatic, Equipment: air conditioning, all wheel drive, differential lock, trailer coupling, truck registration, From our range of new vehicles, we offer you: Large tank fire engine GTLF 10-Staffel 6x6 all-wheel drive on an off-road capable SCANIA P450 XT chassis Demanding operations require high-quality and powerful equipment. Bdjdpjxh Dvpjfx Andei Our GTLF 6x6 on a Scania chassis quickly and safely transports personnel, equipment, and large quantities of extinguishing agents to the respective deployment site. Chassis: • SCANIA P450 XT 6x6 EURO 6 with 450 hp (331 kW) and automatic transmission • Off-road tires, both rear axles with twin tires for high driving stability • Front winch available as an option Cab: • Standard Staffel cab (1:5) in RAL 3000 (fire engine red) • Standard 4 PA mountings in the crew compartment • Air conditioning and auxiliary heater Superstructure: • High-quality superstructure in frame construction made of rust and corrosion-free material • Fold-out steps for each side equipment compartment • Individually adapted equipment storage made of stainless steel according to your wishes • Walkable, non-slip vehicle roof • Ladder bracket, available with removal aid as an option Vehicle pump/extinguishing agent tank: • Maintenance-free combined normal pressure pump FPN 6000-10 • PUMP&ROLL capable • Performance 6,000 l/min at 10 bar • Integrated, steplessly adjustable foam mixing system • Water tank 10,000 l with integrated foam agent tank 1,000 l • Additional heater in the pump room Firefighting equipment: • Quick-attack system with 60 m of dimensionally stable hose • Foam/water monitor 3600 l/min on the vehicle roof, also available with remote control • Additional front monitor available • Self-protection system with 4 extinguishing nozzles in front of the tires Safety and lighting • LED light bar on the vehicle roof • LED front flashing beacon • Pneumatic special signal system • Public address system 100 W with intercom unit • Rear view camera • Comprehensive LED lighting in the crew compartment and all equipment compartments • LED ambient lighting on the superstructure and additional spotlights • Pneumatic LED light mast with remote control • Hygiene board available as an option The images show a structurally identical customer vehicle with optional equipment in some cases. We would be happy to provide you with a specific offer and present the vehicle to you in detail. All information is provided to the best of our knowledge and belief, without guarantee of completeness and accuracy. This advertisement does not constitute an offer but rather information. Subject to prior sale!

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND Authorized Dealer - All items in stock! !! SPECIAL OFFER !! SIEGMUND Retro Welding Table 2400x1200x200 mm, accessories included SIEGMUND welding table just like 25 years ago with plasma nitriding and modern table legs Product description - Table dimensions: 2400x1200x200 mm - High-quality S355J2 steel with plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole diameter 28 mm Bdodpfx Aoxflftondji - Drill holes in 100x100 mm grid - Corners, edges, and drill holes chamfered at 45° - Side panel height 200 mm - Drill holes in side panels in a diagonal grid - Construction reinforced with ribs Plasma-nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion-resistant / higher load-bearing capacity Specifications: - 28-hole pattern / Dimensions 2400 x 1200 x 200 mm - Plasma-nitrided version - Includes 4x base feet (basic configuration) - Includes accessory set (see Image 3): * 6x 280604 * 12x 280511 * 8x 280420.N * 2x 280110.N * 1x 283999

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore diameter 28 mm - Surface holes with a 100x100 mm grid - Rounded corners, edges, and holes - Side panel height 200 mm - Side panel hole spacing 50 mm - Surface scale included - Construction reinforced with ribs - Grid lines enable precise setups The welding tables are equipped with a scale as standard. Plasma nitrided finish: - Protection against rust, scratches, and weld spatter adhesion Bjdpfxjxaa Eks Andodi - More corrosion-resistant / higher load capacity Features: - 28-hole pattern / Dimensions: 2400 x 1200 x 200 mm - Plasma nitrided finish (750) with scale - Includes 4x base feet

Condition: new, table length 2000 mm table width 1000 mm table height (lateral area) 100 mm weight 351 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm Bsdpfxoxaa Hbs Andjdi - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, table length 2000 mm table width 1000 mm table height (lateral area) 200 mm weight 699 kg SIEGMUND authorized dealer - all items available! Bdsdpfx Aexabfrjndoi Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 28 hole pattern / dimensions 2000 x 1000 x 200 mm - Extreme plasma nitrided version with scale - with diagonal grid on the table surface - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, table length 2000 mm table width 1000 mm table height (lateral area) 100 mm weight 354 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including tool set of 16 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Plasma nitrided version with scale Bdjdpfxexabqhe Andei - Including 4x basic equipment - incl. 16 tool set 3: + 8x 160610.N clamp + 4x 160630.N clamp + 4x 160645.1.N prism + 24x 160510 bolts + 4x 160410.N stop + 8x 160420.N stop + 8x 160108.N angle + 8x 160110.N angle + 2x 160162.N angle + 1x 160134 + 36.N bracket + 1x 163999 accessory set

Condition: new, dimensions: innen 1160 x 580 x 580 mm Air consumption 400 - 800 l/min. air pressure 3,4 - 8,0 bar workpiece weight max. 120 kg total power requirement 1,2 kW weight 115 kg range L-W-H 1225 x 935 x 1640 mm Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials * e.g. quartz, glass ball, plastic ball, etc. - With gas pressure springs for quick and easy loading and unloading - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger * The air flow is controlled by a foot pedal Bdedpexak Dqjfx Andsi - Two fluorescent tubes (230 volts) * in a separate housing with protective screen and exchangeable protective film - Light switch with double function: suction and cabin lighting * are switched on and off at the same time * Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be used) - Container for blasting material - dust extraction - foot switch - Operating instructions in German Scope of delivery : - High quality jet gun with ceramic nozzle - 4 ceramic nozzles (6/6/7/7 mm) - 5 replacement foils for viewing windows

Condition: new, mileage: 100 km, power: 350 kW (475.87 HP), fuel type: electric, overall weight: 18,000 kg, color: white, gearing type: automatic, emission class: euro6, Equipment: electronic stability program (ESP), navigation system, Vehicle number: 550041 accident-free, fully serviced according to maintenance schedule, non-smoking ---- ASSISTANCE SYSTEMS * Lane change warning system LIGHT & VISION * High beam assistant EXTERIOR * Exterior sun visor Other features -----Color/Paint----- Chassis color: Anthracite Gray * Cab color E1980WHTE CRYSTAL WHITE * Lower step, cab: Crystal White -----Tires/Wheels----- Goodyear * RR, not applicable * Front axle(s): 385/55R22.5 * Alu Alcoa Dura-Bright 32 mm * F1, 385/55R22.5GO AFMAXS 160/000 K Steering ABA * R1, 315/70R22.5GO EQMD 154/150 L Traction BBB 3P -----Equipment/Special equipment----- Adaptive Cruise Control with FCW and AEBS-3 * Electric vehicle * Rear axle ratio 2.38 * Wheelbase 3.90 m / rear overhang 0.99 m * Standard component arrangement * Batteries in rear overhang, no spare wheel holder * Standard warranty 1 year, 2nd year DL 1 year PH * Sleeper High Cab * Chassis front design: Aero base plate * Air-suspended cab * Signal horns, 2 sets * LED headlights, cornering and fog lights * Headlight washer * Headlights with height adjustment * LED skylights * Two LED headlights for cab rear wall * Handle & Trim: Black, Wall: Darkened/Window * Windshield with sun protection film * Laminated glass with sun protection film * Digital vision system by DAF * DAF Corner View * Central locking, 3 keys, 2 remote controls * Adjustable roof spoiler, short, Sleeper High Cab * Side fenders, one side foldable * Steering wheel, leather * Dashboard design: Plateau * Cab, interior trim: Argenta * Door panel: Loosely woven fabric * Driver's seat: Super Air * Armrests on both sides of the driver's seat * Passenger seat: Cinema with Alcantara upholstery * Passenger seat: Cinema with Alcantara upholstery * Cooler box or refrigerator * Xtra Comfort mattress + topper under bunk * Luggage compartment * Safety net on both bunks * Curtains with separating curtain * LED interior lighting: Luxury * Automatic cab climate control * Roller blind, passenger side * Sunroof with electric operation * Auxiliary power supply: Standard + 2x 40 A * ECAS remote control with extended functions * PACCAR Connect with navigation and tablet software * Preparation for toll system * Digital tachograph, VDO 1C, version G2V2 * Infotainment including DAF Truck Nav., tablet preparation * Speakers: Exclusive * Antennas: Radio, 2x mobile, GNSS Extra: CB * Predictive Cruise Control * Wireless charger * Airbag (driver) and 2 seatbelt pretensioners * Rear warning system * Front: 9.00 t, parabolic, 183N * Axle load monitoring * E-motor EX-D2 350 kW Cab emblem: 350E * Charging with 325 kW DC * Mechanical differential lock * Parking brake assistant * 5 HV battery packs: Under cab, L1+L2+R1+R2 * Air reservoir made of aluminum * Catwalk with step, long * One wheel chock * SAF S36-20, cast iron, 150+40mm, low maintenance * Chassis protection bar * Hard-wired body signals and warnings * ECAS control * Preparation for aftermarket switches * CAN J1939 functions in body connector * Additional connector, lighting, chassis * E-PTO socket 650 V DC < 90 kW * ePTO control when ignition is ON * Batteries 2 x 210 Ah AGM Bsdsyltkfopfx Andodi * Additional cab insulation * Safety package NGD * Executive package XD/XF * Climate package ---- Subject to prior sale and errors. The vehicle description is for general identification of the vehicle and does not constitute a guarantee in the legal sense. For the exact scope of equipment, please refer

Condition: used, Year of construction: 2014, operating hours: 3,473 h, fuel type: diesel, MOFFET M4 25.3 PIGGYBACK FORKLIFT - 2.5T - DUPLEX MAST ----VEHICLE HISTORY * VIDEO AVAILABLE UPON REQUEST ----Vehicle Data: Manufacturer: Moffett / Cargotec Ireland Ltd. * Type: M4 25.3 * Year of Manufacture: 04/2014 * Serial Number: N150234 * Operating Hours: approx. 3,473 h * Tare Weight: 2,200 kg * Load Capacity: 2,500 kg * Load Center: 600 mm Drive: Diesel Engine * hydrostatic drive, as far as can be determined on the unit * 3-wheel chassis * off-road design Lifting Mast: Duplex Mast * hydraulic lifting mast * Lifting Height: approx. 4 m * robust mast guidance * fork carriage Fork Equipment: Fork Tines * hydraulic fork carriage * Reach Forks / Telescopic Forks according to documentation * MSE KOOI ReachForks * Type RE * Serial Number 1430060 Hydraulics: hydraulic lifting function * hydraulic mast operation * hydraulic control functions at the driver's seat * additional hydraulic functions on the fork carriage, as far as can be seen in the pictures Chassis: 3-wheel concept * large, lugged tires * tires suitable for off-road use * compact piggyback forklift design * lateral support/wheel arm design Driver's Seat: open cab * driver's seat * seatbelt * steering wheel Bodpezz Ed Iefx Andsdi * control levers for hydraulic functions * instrument/control display * hour meter Lighting: front headlights * rear lights * turn signals / position lights * rotating beacon Safety: driver protection frame * seatbelt * warning lights * acoustic warning device * CE marking * Sound power level 107 dB LWA * Declaration of Conformity available Design / Application: Piggyback Forklift * suitable for truck mounting * compact design * suitable for construction sites and off-road use * laterally transportable / foldable chassis design Tires: lugged industrial tires * off-road profile * varying states of wear visible * tread partially still present Condition: used, overall condition * signs of wear and tear due to age and use * paint damage present * signs of rust / surface corrosion * fork tines with signs of wear Documentation: CE marking * Declaration of Conformity for ReachForks available * nameplate available ----* EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ * EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS PLATES AND 15 DAYS AUSTRIA PLATES EURO 1 TECHNICAL DATA SHEET VEHICLE RESERVATIONS ARE ONLY POSSIBLE VIA THE EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to the EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. (For sales to the EU and third countries will be levied deposit/guarantee of at least € 500.00 / € 1000.00) Subject to changes, errors and prior sale! More vehicles can be found on our Sales are exclusively subject to our terms and conditions - see homepage Important Note - Important Information: Despite careful checking of all details in our offer, it may happen that errors creep in. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore,