Used Cpu for sale (246)

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control unit, converter, controller, servo line former, drive control unit, AC mainspindle drive, spindle controller Bjdpeztppfsfx Abtowt -Manufacturer: Indramat. AC mainspindle drive from a Mikron VC500D CNC machining center -Type: KDA 3.2-100-3-AP0-W1 -Art.: 776781-001 -Dimensions: 485/390/H150 mm -Weight: 17.8 kg

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller -Manufacturer: Indramat, AC servo controller from CNC machining center Mikron VC500D -Type: TDM 1.2-30-300-W0 Bwodpeztplyjfx Abtjt -Number: 3x servo controllers available -Price: per piece -Dimensions: 325/390/H105 mm -Weight: 8.2 kg

Year of construction: 2011, condition: excellent (used), We are offering for sale our Viscom AOI S3088 - III in very good condition. - Manufacturer: Viscom SE, Hanover - Type: S3088-III Bjdpfezv S Dwjx Abtowt - Inventory No.: ZZ052495 - Year of manufacture: 03/2011 - Serial number: 101159 - Camera configuration: 8M (4x orthogonal, 4x angled) - Software version: 9.40 (4) - Licenses: OCR and DMC - Last calibration: May 2025 - Operating system: Windows 7 Professional (Service Pack 1) - Processor: Intel Core i7-3770 CPU / 3.40 GHz - RAM: 16 GB - UPS functional The system has been inspected by our technician and found to be in very good condition. We will gladly provide you with a demonstration video of the system, or we look forward to your visit.

Condition: used, Year of construction: 2019, Working Width: 1315 mm Materials: ALU, LDPE, LLDPE, OPA, PET, PAPER, BOPP Unwinder Diameter: 1000 mm Rewinder Diameter: 1500 mm Mechanical Speed: 500 m/min Primary Unwinder Max roll Ø: 1000 mm | Core: 76 / 152 mm | Max weight: 1000 kg Web width: 1330 mm | Max lamination width: 1315 mm | Min web width: 500 mm Secondary Unwinder Max roll Ø: 1500 mm | Core: 76 / 152 mm | Max weight: 2000 kg Web width: 1330 mm | Max lamination width: 1315 mm | Min web width: 500 mm Hydraulic loading, BST OPG web guide, photocell edge detection Rewinder Max roll Ø: 1500 mm | Core: 76 / 152 mm | Max weight: 2000 kg Web width: 1330 mm | Max lamination width: 1315 mm Working Width: 1315 mm Materials: ALU, LDPE, LLDPE, OPA, PET, PAPER, BOPP Unwinder Diameter: 1000 mm Rewinder Diameter: 1500 mm Mechanical Speed: 500 m/min Adhesive Systems Single-component Monodispenser (VEA) for paper laminations Two-component solventless PU dispenser Heating belts for 200 kg adhesive drums Materials: ALU 6.35–50 μm | LDPE/LLDPE 30–200 μm | OPA 12–50 μm | PET 10–30 μm | Paper 40–200 gsm | BOPP 12–80 μm Controls & Accessories PLC Siemens Simatic DP IM 151-8F PN/DP CPU ET200S Bsdoyiu I Tspfx Abtewt Semi-automatic roll trolley 1000 kg

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Traversing arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, rear side of machine base • 2 T-slots, 18 mm, left side of machine base • Thread cutting unit • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 Distance between T-slots: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table (min): 70 mm Distance spindle nose – table (max): 680 mm Distance spindle nose – floor (min): 970 mm Distance spindle nose – floor (max): 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacities Drilling capacity (solid): St 60: ⌀ 40 mm GG 22: ⌀ 50 mm Tapping: St 60: M36 GG 22: M42 Bjdpozrr Uujfx Abtjwt Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental Measurement units: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram function: yes Machining Cycles Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: cycles for determining reference points by manual probing of the workpiece for: - Arbitrary clamped rectangular parts - Arbitrary clamped round parts - Centering of cast and flame-cut parts - Angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 3,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 1,000 mm, spindle motor power: 8,300 W, total height: 1,700 mm, total width: 1,750 mm, overall weight: 1,800 kg, controller manufacturer: FAGOR, controller model: 8055, product length (max.): 2,670 mm, number of axes: 2, Horizontal turning machine manufactured in 2001. This EMCO EMCOMAT 200X1000 features a turning length of 1,000 mm and a maximum turning diameter over bed of 400 mm. It is equipped with a Fagor 8055 CNC control unit and includes a SMW AUTOBLOCK wedge-type chuck and a Multifix quick-change tool holder. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOMAT 200X1000 machine we have for sale. Contact us for further details. - Description: 2-axis teach-in / cycle-controlled CNC lathe with Fagor 8055 CNC control- Control Unit: Fagor 8055 (CPU 8055/AB-T, AXES 8055, I/O 8055)- Distance between centers: 1000 mm - Center height (distance above centers): 200 mm - Max swing over bed: Ø 400 mm- Turning length: 1,000 mm- Maximum turning diameter over slide: 220 mm- Travel range, Z-axis: 1,000 mm- X-axis travel: 220 mm- Turning tool cross-section: 20x20 / 25x25 mm- Spindle thread: Camlock 5- Internal taper: 1:20- Spindle bore: ø51.6 mm- Spindle speed: 0–3000 rpm, continuously variable- AC Motor Drive: 18.5 / 8.3 kW- Tailstock Quill Diameter: 52 mm / MK4- Tailstock Quill stroke: 145 mm- Power supply: 400 V / 3-phase / PE- Rated power: 10 kVA- Included Equipment / Accessories:- SMW AUTOBLOCK wedge-type chuck (includes several base jaws)- Multifix quick-change tool holder (includes several different tool holders), chuck key- Drill chuck- Rotating center- Safety device fully functional Bwedpfozrvktex Abtet Technical Specification Counter Spindle No Driven Tools No

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller -Manufacturer: Control Techniques, Servo Drive -Type: MAXAX 100/3000 -Input: 1.5 kVA -Output: 1 kW -Number: 2x Servo Drive available -Price: per piece -Dimensions: 275/110/H235 mm Bwjdpezrlixofx Abtst -Weight: 2.8 kg/pc.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: Kühlmitteleinrichtung, Coolant system for cooling lubricant RUEZ coolant tank with integrated sludge scraper, chip conveyor - Coolant cleaning system for cooling lubricant - Including two-part RUEZ lamella separator. - Including RUEZ safety sump in accordance with WHG with 100% collection space - Including clean tank & RUEZ magnetic roller filter - Year of construction 2022, unused & as good as new - RAL 7035 light gray - Superstructure for chip cart - No belt filter, sediment system - Available immediately - Price VB Description Coolant system: - Capacity approx. 34,720l - Filling volume approx. 32,710l - Useful volume approx. 22,020l + approx. 6,017l (clean tank) - L/W/H approx. 7,341mm/2,800mm/2,000mm - Tank walls 4mm/S235JRG2 - Walk-on, split tank cover - Tank supports approx. 100mm - Level indicator OWE 2/C as leakage protection - Inlet/distributor with strainer basket - 2 supply pumps - Type: NB100-25/4-15kW - 2000 l/min at 2.1 bar - Pipe - DN150/125 - Return line - DN 100 - PN 16 - RUEZ float switch RB 200 - 3 / 1900 - Level indicator FTL31-CA4M2AAWBJ as overfill protection (clean tank) - RUEZ control unit - Siemens TIA - SPS: SIMATIC S7-1200, CPU 1215C - Visualization: KTP700 control panel - Indicator light red-yellow-green Bwedpetwpttofx Abtot

Condition: ready for operation (used), Drilling diameter: 3-25mm, drilling depth: 1000mm, connected load: 36kW, control: EST, 99 drilling memory positions per program, grinding and coordinate programming, plain text programming via input mask. Accessories: paper band filter, coolant cooling system, 4-door control cabinet, high-pressure pump up to 150bar, oil tank, 1 steady rest for smaller diameters at large drilling depths, direction-adjustable holder for drill bushing holders, various drill bushing holders, long clamping table for 0-height, tailstock stop and base plate for machine vice freely movable on the additional table, matching precision machine vice optionally available. Speed, high pressure, Z-axis (feed), X/Y-axes, and W-axis (approach slide) programmable via control. CPU and card rack defective (fan fault), machine therefore not operational, drives and guideways were fully functional until last operation. An on-site inspection is possible. Bwsdpfoylbrqex Abtet

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, pressing force: 16 t, total width: 700 mm, center height: 1,050 mm, working height: 1,050 mm, Automatic straightening system, mechanically overhauled, fitted with new SIMATIC S7-1500 control and Drive Controller CPU 1504D TF. Max. centre distance 500 mm, straightening force 16 t, straightening stroke 20 mm, idle stroke 95 mm, working height 1050 mm, power rating 10 kVA, average consumption 1.3 kW. Bwedpfoxldiqox Abtst Option: The machine can be equipped with a lifting beam conveyor (through the machine), as well as infeed/outfeed belts according to customer requirements, and also with a safety fence. Currently, the machine is equipped with 1 straightening station; expansion is possible.

Condition: new, Year of construction: 2026, operating hours: 8 h, functionality: fully functional, machine/vehicle number: 16102025, total length: 14,000 mm, total width: 4,000 mm, total height: 3,030 mm, overall weight: 3,000 kg, input voltage: 220 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 14 bar, compressed air connection: 6 bar, input current: 12 A, temperature: 10 °C, heating capacity: 3 kW (4.08 HP), power: 6 kW (8.16 HP), warranty duration: 12 months, operating pressure: 14 bar, control type: PLC-controlled, degree of automation: automatic, Equipment: CE marking, documentation/manual, lighting, The KEG barrel is manually placed on the conveyor with the top down. On the control panel, the type of KEG barrel to be worked with is set and started with the “START” button. The conveyor chain also acts as a buffer - for three 30L KEG or five 10L KEG barrels. When the barrel enters the washing machine, the conveyor stops and the washing is started. The machine consists of 2 zones - washing with chemicals and the second for rinsing. The first (longest) processing zone is used for the main cleaning with chemicals. The second zone is used for rinsing. Spray pipes are fixed in each spraying zone. Along the sides, bottom and top to ensure the cleanliness of the specified Keg barrels. Washing with chemicals and adjusting the amount of its supply, as well as without chemicals, is possible. Drive rollers ensure the fixation of the barrels and their rotation during washing, brushes wash the sides of the KEG barrel, the arrangement of high-pressure nozzles ensures water supply to the brushes and washing of the bottom of the barrel. Washing of one barrel max. 1.5 min., this time can be changed depending on the degree of dirtiness of the barrels. Excess water is drained into the sewer through the overflow. After washing, the barrels are fed to the filling machine with elevators. A sensor on the line near the filling machine controls the operation of the line. If the sensor is covered, the barrel feed is stopped and is automatically resumed when the space becomes free. If at this moment the barrel is in the washing machine - the cycle is completed. If the space near the filling machine is free at the end of the washing cycle, the feed continues. If not - the barrel feed line is in standby mode. Ventilation is built into the washing machine body. Control panel: SIMATIC HMI, KTP400 Basic Controller: SIMATIC S7-1200, CPU 1214C Pump water output: Q min/max 5-13m3/h Chemical dosage – adjustable on the control panel Material used: stainless steel AISI 304 Cylinders: FESTO 2. Elevators: for KEG barrels Stainless steel frame Separation and ejection mechanism – pneumatic cylinders (FESTO) Bodpfxev Di Dne Abtowt Chain – stainless steel • Dimensions and specifications are to be specified at the time of ordering. You can El. diagrams and drawings are submitted upon delivery of the equipment. Warranty – 12 months from the moment of signing the invoice CE Certificate

Condition: excellent (used), ERICHSEN CORROCOMPACT 618-1000 Corrosion Testing System Manufacturer: ERICHSEN GmbH & Co. KG Type: CORROCOMPACT 618-1000 Year of Manufacture: 2017 Machine Type: Corrosion Testing System / Climate Change Testing System Test Chamber Volume: 1,000 liters For sale is a used ERICHSEN CORROCOMPACT 618-1000 corrosion testing system with a separate air conditioning unit and Siemens SIMATIC touch control. The system was developed for professional corrosion, climate change, salt spray, and condensation tests and is ideally suited for testing laboratories, the automotive industry, research institutions, and quality assurance. Technical Data: Model: 618-1000 Series: CORROCOMPACT 617 Serial Number: 16855/005 Test Chamber Volume: 1,000 liters Power Supply: 3+N+PE AC 400 V / 50 Hz Connected Load: 5 kVA + 9 kVA (air conditioning unit) Fuse Rating: 3 × 32 A Compressed Air Connection: 6–10 bar Deionized Water Connection: 3–6 bar Control: Siemens SIMATIC HMI Touch CPU Version: 2.2.3 HMI Version: 2.2.3 Air Conditioning Unit: Manufacturer: ERICHSEN Type: VS-Bo-1,1-40-L-S Year of Manufacture: 2014 Serial Number: 14-2430 Refrigerant: R507 Connected Load: 3.3 kW Max. Operating Current: 8.4 A Compressor Power: 1.3 kW Evaporator Fan: 0.18 kW Condenser Fan: 0.28 kW Steam Humidifier: 1.6 kW Heater: 5 × 0.2 kW Dimensions: External Dimensions (W × D × H): approx. 2,100 × 1,350 × 1,670 mm Height with Hood Open: approx. 2,500 mm Internal Dimensions (W × D × H): approx. 1,190 × 815 × 1,040 mm Equipment: Siemens SIMATIC Touch Panel Separate Air Conditioning Unit 1,000-Liter Test Chamber Climate Change Testing Salt Spray Testing Condensation Testing Automatic Test Programs Compressed Air Connection Deionized Water Connection Salt Solution Connection Exhaust Connection Floor Drain Supported Test Standards: DIN EN ISO 11997-1 DIN EN ISO 6270-2 AT ISO 11503 ASTM D2247 VDA 621-415 B P-VW 1210 DIN EN ISO 9227 NSS Bwjdpfx Aszk A Ebsbtst VDA 233-102 DIN EN ISO 6270-2 AHT DIN EN ISO 9227 AASS DIN EN ISO 9227 CASS ASTM B117 D171058 DIN EN ISO 6270-2 CH DIN 50958 ISO 9227 BS 3900 Part F2 DIN 55991 Transport Data: Test Chamber (W × D × H): approx. 2,100 × 1,350 × 1,670 mm Air Conditioning Unit (W × D × H): approx. 1,700 × 900 × 1,900 mm Weight of Test Chamber: approx. 600 kg Weight of Air Conditioning Unit: approx. 500 kg Total Weight: approx. 1,100 kg Condition: Used The system was last used in an industrial setting. Optical condition according to the pictures. Scope of Delivery: ERICHSEN CORROCOMPACT 618-1000 Air Conditioning Unit VS-Bo-1,1-40-L-S Siemens SIMATIC HMI Touch Accessories according to the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: new, Year of construction: 2026, functionality: fully functional, The Nanxing NPC330 is a high-performance beam saw designed for fast and precise cutting of MDF, particleboard, plywood and other wood-based panels. It is the ideal solution for furniture factories seeking high throughput and consistent accuracy. The saw carriage is driven by a 2 kW servo motor with rack and pinion transmission, reaching cutting speeds up to 90 m/min and return speeds up to 120 m/min. The powerful software package includes cutting optimization, work process management, cutting simulation, error display, and automatic label printing for efficient production tracking. Key Features Cutting height: up to 120 mm Cutting width: 3270 mm Automatic pressure beam adjusts to the total height of the panel stack for maximum efficiency Air flotation table ensures scratch-free and easy panel handling 10 pneumatic clamps (optional 12) for secure fixing and precise positioning Servo side alignment for perfectly perpendicular cuts Full protection system: operator hand protection, piano-type blade cover, optional safety fence & light barrier Quick-change main saw blade and one-click scoring blade adjustment Automatic lubrication system for longer machine life and lower maintenance costs Industrial control cabinet with international brand components, 21.5” touchscreen, PC (i5 CPU, 8 GB RAM) Technical Specifications Max. cutting length: 3270 mm Max. cutting height: 90 mm (optional 120 mm) Main saw motor: 15 kW (optional 18.5 kW), 3910 rpm Scoring saw motor: 4300 rpm Main saw blade: Ø380 mm (shaft Ø60 mm) Bjdpfxsxcwwpj Abtjwt Scoring saw blade: Ø200 mm (shaft Ø45 mm) Feed speed: 90 m/min (return 120 m/min) Total installed power: 24.2 kW Machine dimensions: 6900 × 5400 × 1820 mm Weight: 4,560 kg Power supply: 380V / 50Hz / 3-phase Air requirement: 0.6 MPa Dust extraction: Ø150 mm × 3, min. speed 28 m/s Benefits for Manufacturers High productivity: package cutting with fast forward and return speed Excellent accuracy: ±0.03 mm thanks to heavy-duty frame and pneumatic clamping Digital optimization: AutoCut software included to minimize waste and optimize cutting plans Maximum safety: full machine guarding, light barrier, and emergency stop Operator-friendly: air flotation table and servo-driven feeding system for effortless panel handling

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,809 h, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,650 kg, controller manufacturer: SIEMENS, controller model: S7 with SIMATIC HMI Touch Panel, product length (max.): 2,400 mm, Circular Metal Saw manufactured in 2023. This PRESSTA EISELE PROFILMA 502 features a powerful 7.5 kW saw drive with a maximum saw blade speed of 2,850 rpm. It offers a cutting capacity of 270 x 150 mm and a maximum profile width of 270 mm. The machine includes a Siemens S7 control system with a touch panel for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE PROFILMA 502 machine we have for sale. Contact us for further details. Technical Specifications • Saw Drive Power: 7.5 kW (7,500 W) • Duty Cycle: S6 • Saw Blade Speed: Max. 2,850 rpm • Power Supply: 400 V, 3-phase, 50 Hz • Current Consumption: 16 A • Operating Pressure: 6–8 bar Cutting Capacity • Maximum Cutting Width: 270 mm • Maximum Cutting Height: 150 mm • Maximum Cutting Diameter: 270 mm • Maximum Round Material Capacity (90°): 190 mm • Maximum Profile Width: 270 mm • Section Length Range: 3–4,000 mm • Minimum Remnant Length: From 75 mm (depending on profile) Bwodpfozi S R Rjx Abtst Saw Blade • Saw Blade Diameter: Ø550 mm • Saw Blade Bore: Ø40 mm Control System • PLC: Siemens S7 • HMI: SIMATIC Touch Panel • Controller: CPU 315 • Safety System: Flexisoft • Functions: • Piece counter • Batch multiplier for bundle processing • Cycle time display • Chain dimension management • Fault diagnostics Connectivity • Remote Access: IXON router with VPN connection Material Feed System • Drive Type: Electronic servo drive • Feed Stroke: 800 mm • Drive Mechanism: Ball screw spindle • Maximum Profile Length: 4,000 mm • Feed Support: Lift/lower roller support Saw Feed • Feed Type: Motorized • Feed Adjustment: Stepless • Cutting Direction: Bottom to top Clamping System • Type: Pneumatic horizontal and vertical clamping • Clamping Position: Feed and discharge sides • Pressure Control: 6 individual pressure regulators Lubrication • Lubrication Type: Intermittent spray system • Reservoir Capacity: 1 L • Features: • Level monitoring • Automatic shut-off Safety Features • Complete safety enclosure • Sound-insulated machine frame • Automatic machine shut-off at end of material stock • Cutting gap extension to protect cut surfaces Material Support • Infeed Conveyor: 740 mm roller conveyor with intrusion guard • Outfeed Table: 450 mm Pertinax support table with intrusion guard Extraction • Extraction Ports: 2 × Ø100 mm Chip Extraction Unit • Model: MG 3 (Italyvacuum Vortex 58 FT) • Year of Manufacture: 2022 • Motor Power: 3 kW • Voltage: 400 V / 3~ (±5%) • Current Consumption: 7.2 A • Weight: 130 kg • Features: • Integrated cyclonic separation system • Contactless antistatic system Additional Information • Machine can be inspected under power.

Condition: used, Year of construction: 2010, Working range X = 4,600 mm Y = 1,535 mm Z = 275 mm Designed for heavy-duty applications, making it ideal for machining large solid wood components and structural timber. The 5-axis controlled machining head enables the production of complex three-dimensional workpieces. • Central lubrication system • Desktop PC o Intel Celeron D CPU 2.66 GHz or higher o 512 MB RAM o 40 GB hard drive o 15" LCD monitor o Keyboard o Mouse o CD-ROM drive o Parallel port o RS-232 serial port o USB port o Ethernet card for connection to the office network • Remote service o Direct modem access for remote diagnostics and service • Electrical control cabinet • Air conditioning for the electrical cabinet • Safety system o Two pressure-sensitive safety mats on the front side of the machine with integrated control unit, ensuring safe alternating operation. • Signal lights for alternating (pendulum) machine operation • Job recovery function o Allows machining to resume after an emergency stop. • CE safety protection systems Worktable and accessories • Multizone table for 10 beams and 40 vacuum pods o Allows multiple workpieces to be loaded simultaneously, reducing tool changes and increasing productivity. o Vacuum clamping system o Pneumatic clamping system • 10 ATS beams, each equipped with 4 vacuum pods, L = 1,525 mm • EPS electronically positioned table for 10 beams • Rear stop row for 10 beams with 115 mm travel • Additional stop row at 375 mm with 140 mm travel • Additional stop row at 770 mm with 140 mm travel • Front stop row at 1,175 mm with 140 mm travel • 4 side stops with 140 mm travel (2 left + 2 right) complete with mounting hardware Bwjdpfx Aszlz Svebtst • 2 additional side stops with 140 mm travel (1 left + 1 right) complete with mounting hardware • Position sensors for all stops • 4 lifting devices for easier loading and unloading of workpieces for H = 74 mm modules • Vacuum unit 132 × 146 × H74 mm • Vacuum unit 132 × 75 × H74 mm • Vacuum unit 132 × 54 × H74 mm • UNICLAMP workpiece clamping system • Window manufacturing kit H = 74 mm, 40–98 mm • 6 UNICLAMP double-acting quick-connect clamps • 2 UNICLAMP modules for short workpieces • Chip and waste conveyor • Vacuum generator for 250 m³/h vacuum pump o 250 m³/h vacuum pump • Spindle and machining equipment • Motor power: o 12 kW at 12,000 rpm (S1 duty) o 15 kW at 12,000 rpm (S6 duty) • Maximum spindle speed: 22,000 rpm • Tool interface: HSK F63 • C-axis: continuous 360° • B-axis: ±100° • Coolant unit with 1,600 W cooling capacity • 15-position tool magazine for the 5-axis head • Additional Z carriage for rear units • 8.6 kW PEAK POWER electrospindle with HSK F63 interface and air cooling, specially designed for applications requiring high torque at low spindle speeds • Gear-driven C-axis rotating unit (360°) • BH9 drilling unit o 9 independently controlled drill spindles o Includes: o 5 vertical drills with 32 mm spacing o 2 independent dual-output horizontal drills o Separate 3 kW drive motor • 22-position tool magazine with 180 mm centre distance • Automatic lubrication system Two Leitz tool sets are available for EUR 22,000 + VAT: • LEITZ IV 68 tool set • LEITZ IV 90 tool set This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, year of last overhaul: 2011, Equipment: CE marking, documentation/manual, Friction welding machine from the manufacturer MTI, equipped for welding turbochargers. The machine is equipped with: - Siemens PLC, CPU 315, - Rexroth hydraulics - German user interface Bwsdpfjv Uzf Eex Abtjt - CE marking Upon request, this machine can also be converted for many other welding tasks. We can also produce your friction welding joints, up to 300 tons of clamping force. Please contact us for further information!

Condition: used, PLC control, central module, main memory, CPU, central device, central processing unit, compact device, compact CPU -Manufacturer: Siemens, Simatic S7-200 CPU 222 compact device Bwodpfoh Di Hvjx Abtst -Type: 6ES7 212-1AB22-OXBO -Number: 1x module available -Price per piece -Dimensions: 90/60/H95 mm -Weight: 0.2 kg/pc.

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter -Manufacturer: INFRANOR -Type: SMD 101/120 Bwjdpfx Asd Dkzrobtet -Servo drive -Number: 1x control cards available -Price: per piece -Dimensions: Servodrives -Weight: 0.4 kg

Condition: good (used), PLC control, central module, RAM, CPU, central device, central unit, compact device, compact CPU, processor, Microbox PC -Manufacturer: Siemens, Simatic Microbox PC Simatic IPC427C -Type: 6ES7647-7BJ30-3XM0 -Dimensions: 320/165/H70 mm Bjdpfx Absuuu Ezjtewt -Weight: 2.7 kg

Year of construction: 1997, condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control, converter, controller, servo line former, drive control device, power supply, AC main spindle drive, spindle controller -Indramat: AC main spindle drive from DMT CD320 cycle lathe -Type: TDA1.3-100-3 API Bwodpfen Tvb Dsx Abtot -Item: 244599 K41/96 -Dimension: 325/150/H390 mm -Weight: 10.8 kg

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control, converter, controller, servo line former, drive control device Bwsdpfjn Tvcdex Abtst -Indramat: AC Servo Line Former from DMT CD320 cycle lathe -Type: NAM 1.2-15 -Item: 246506 K39/96 -Dimension: 325/105/H390 mm -Weight: 21 kg

Condition: good (used), PLC control, central module, memory, CPU, central device, central unit, compact device -Manufacturer: Siemens, compact unit Simodrive -Type: D380/30 Mreg-GdG6V55-3A 6 RA 2718-6DV55-0AA0 -Quantity: 1 piece available -Dimensions: 270/170/H290 mm Bsdpfomrw U Aox Abtjwt -Weight: 7.3 kg

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power pack, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit -Manufacturer: Fanuc, Velocity Control Unit from machining center Matsuura MS-710 V -Type: A06B-6035- H422 H423 -Number: 2x servo module available -Price per piece -Dimensions: 500/260/H155 mm -Weight: 6.6 kg Bjdpfjhtryiox Abtswt

Condition: good (used), PLC controller, central assembly, working memory, CPU, central unit, central processing unit, compact unit -Manufacturer: Siemens, Simatic S5 compact device -Type: 6ES5 095-8MA03 -Number: 2 modules available Bwjdeh A Sb Eepfx Abtet -Price: per piece -Dimensions: 150/145/H135 mm -Weight: 1.2 kg/pc.

Condition: good (used), Year of construction: 1989, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller Bedpsqgi Hvofx Abtowt -Indramat: AC servo controller from Battenfeld injection molding machine -Type: MOD13/1X052-088 -Contr: TDM 3.2-30-300-W1 -Quantity: 2x servo controllers available -Price per piece -Dimension: 450/70/H325 mm -Weight: 8.6 kg/pc.