Used Firewood Processor for sale (420)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, sheet thickness (max.): 3 mm, working length: 2,500 mm, TECHNICAL DETAILS Sheet thickness with tensile strength of 410 N/mm² max.: 2.00 mm Sheet thickness with tensile strength of 600 N/mm² max.: 1.25 mm Sheet thickness with tensile strength of 265 N/mm² max.: 3.00 mm Minimum sheet thickness: 0.50 mm Length of the notched plate at the inlet max.: 2,700 mm Width of the notched plate at the inlet max.: 1,500 mm Rotatable diagonal of the notched plate max.: 2,700 mm Bending length max.: 2,500 mm Clearance for bending above the work table max.: 127 mm MACHINE DETAILS Processor: Intel Pentium III, 500 MHz RAM: 128 MB SDRAM Graphics memory: 4 MB SGRAM Hard disk capacity: 9.1 GB CD-ROM drive: 600 MB Floppy disk drive: 3.5 inch, 1.44 MB Network cards: 2 Screen diagonal: 17 inches Voltage: 400 V Frequency: 50 Hz Number of phases: 3 Rated power: 38 kW Rated current: 64 A Switching capacity of the main switch: 40 kA Dkjdpozv Rc Ssfx Aptot Further technical details can be found in the attached documents.

Condition: new, High-performance Log Splitter with 20 Tons of Splitting Force - Brugger SA48 Pro! The Brugger SA48 Pro log splitter is the perfect solution for quickly and effortlessly processing logs with a diameter of up to 48 cm into high-quality firewood. Its well-thought-out yet simple design distinguishes this machine, which not only requires low maintenance but also facilitates repairs. This impressive device is equipped with either a powerful 14 HP Kohler petrol engine or a 9.5 kW 400V electric motor. The SA48 Pro does not rely on electronic control but is operated purely by mechanical components such as hydraulic valves with levers. Specifications: Dkjdpjlu Dc Nefx Aptot Maximum cutting length: 55 cm Maximum diameter: 48 cm Splitting force: 20 tons 55 cm bar Extra-wide 3.2 m conveyor belt Hydraulic feed up to the chainsaw Despite its high splitting force and large diameter capacity, the log splitter remains relatively compact. Equipped with a drawbar, it can be attached to any trailer hitch, allowing for easy transportation. Additionally, two people can easily move the log splitter by hand on a flat surface without the need for a vehicle. The length of the firewood can be adjusted continuously up to 55 cm. The splitting wedge can be manually adjusted in different positions using a lever, allowing for 2-way, 4-way, or even 6-way splitting, depending on the thickness of the wood. Optional equipment such as the log lifter or chain conveyor further facilitates the work process. The chain conveyor allows for loading multiple logs using a forklift, crane, or front loader, eliminating the need to lift one log at a time. Prices: Brugger SA48 Pro: €9,749 6-way knife: €199 8-way knife: €299 Additional PTO drive (for electric or gasoline) : €949 Log lifter: €1,498 Chain conveyor: €1,898

Condition: new, High-performance Firewood Processor with 20 Tons of Splitting Force - Brugger SA48 Pro! The Brugger SA48 Pro log splitter is the perfect solution for quickly and effortlessly processing logs with a diameter of up to 48 cm into high-quality firewood. Its well-thought-out yet simple design distinguishes this machine, which not only requires low maintenance but also facilitates repairs. This impressive device is equipped with either a powerful 14 HP Kohler petrol engine or a 9.5 kW 400V electric motor. Dkjdpepz I Ncjfx Aptjt The SA48 Pro does not rely on electronic control but is operated purely by mechanical components such as hydraulic valves with levers. Specifications: Maximum cutting length: 55 cm Maximum diameter: 48 cm Splitting force: 20 tons 55 cm bar Extra-wide 3.2 m conveyor belt Hydraulic feed up to the chainsaw Pivoting conveyor belt Automatic chain lubrication Despite its high splitting force and large diameter capacity, the log splitter remains relatively compact. Equipped with a drawbar, it can be attached to any trailer hitch, allowing for easy transportation. Additionally, two people can easily move the log splitter by hand on a flat surface without the need for a vehicle. The length of the firewood can be adjusted continuously up to 55 cm. The splitting wedge can be manually adjusted in different positions using a lever, allowing for 2-way, 4-way, or even 6-way splitting, depending on the thickness of the wood. Optional equipment such as the log lifter or chain conveyor further facilitates the work process. The chain conveyor allows for loading multiple logs using a forklift, crane, or front loader, eliminating the need to lift one log at a time. Prices: Brugger SA48 Pro: €9,749 6-way knife: €199 8-way knife : €299 Additional PTO drive (for electric or gasoline): €949 Log lifter: €1,498 Chain infeed log deck: €1,898

Condition: new, The Brugger SA38 impresses with an impressive splitting force of 12 tons and is the ideal solution for the quick and uncomplicated transformation of tree trunks into high-quality firewood. Logs up to 38 cm in diameter can be transformed into firewood with ease. The SA38 is characterized by its simple yet sophisticated design, which not only ensures high reliability, but also facilitates maintenance and repairs. Technical data Dksdpfx Apspz I I Hstjt - Up to 38cm diameter - Splitting power of 12 tons - 50cm Oregon sword - Log length from 20 - 50cm - Optional log lifter or chain conveyor - Weight 450kg Depending on your individual requirements, various drive options are available, a powerful 14 HP Kohler gasoline engine, a 7.5 kW 400V electric motor or a PTO drive with three-point linkage. Prices Brugger SA38 - 5.499€ infeed conveyor 100cm - 590€ discharge conveyor 350cm - 895€ 6-way splitting knife - 199€

Condition: excellent (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, XYLOG 800 – The professional log sawing and splitting machine for industrial firewood production The Rabaud XYLOG 800 is the powerful solution for anyone who wants to efficiently and economically produce large quantities of high-quality firewood. As a stationary sawing and splitting machine, it processes logs up to 800 mm in diameter with impressive speed and precision – ideal for forestry operations, timber traders, and commercial firewood producers. Your advantages at a glance: • Highest capacity: Up to 800 mm log diameter – perfect for thick hardwoods such as oak, beech, or ash. • Flexible cutting system: Optional with SUPERCUT chainsaw bar (113 cm, automatic tensioning & lubrication). Dkjdpfxszgwfhs Aptet • Adjustable log length: From 25 to 50 cm – hydraulically adjustable with automatic retraction for maximum efficiency. • Powerful splitter: 16 tons of splitting force with ISO POWER (automatic, continuously variable speed control) and two independent splitting knives. • Safe and precise feeding: 3 independent log clamps, chain feed table (up to 8 m usable length), and V-shaped conveyor belts for safe transport even with crooked or short logs. • High productivity: Saws from bottom to top – saves time with smaller diameters and minimizes waste wood. The XYLOG 800 combines sawing and splitting in a robust, low-maintenance system. It is specifically designed for continuous industrial use and impresses with its durability, low operating costs, and excellent log quality. Perfect for: • Professional firewood production • Forestry companies with high throughput • Wood processors who value uniform, sales-ready logs Significantly increase your productivity – with the Rabaud XYLOG 800, you produce more firewood in less time, with less effort, and higher quality. Request a non-binding offer or a demonstration now! The XYLOG 800 – Powerful performance for strong wood.

Condition: used, Year of construction: 2010, functionality: fully functional, THERMAL processor SIRIO TH 85 with input bridge To connect inline with CTP. Dksdpfx Apjzquq Astjt MACHINE IS READY TO WORK.

Condition: new, Year of construction: 2025, Log deck for firewood production Lenght 4 - 10 m Width 1,5 - 3 m Dodpfxevrchis Aptekt 2, 3 or 4 chainlines Crossrollers sinhronised with firewood processor Adjustable height Hydraylic or electric driven

Condition: new, Year of construction: 2026, Motor power 9.5 kW Splitting force 20 tons Voltage 400 V / 50 Hz Working pressure 16 - 20 MPa Cylinder Ø101.6 x 610 mm Maximum log diameter 480 mm Maximum log length 610 mm Cycle time 6 - 8 s Return time 3 s Splitting wedge 6-arm Oregon guide bar 22" Chain 74 links, 0.375 Saw/splitter drive hydraulic motor/gear pump Ejector length 3.2 m Conveyor belt (outfeed belt) 6800 x 250 x 4 mm Tires 13" Shipping dimensions (W x L x H) 2250 x 1000 x 1200 mm Weight 820 kg Dkjdpfjyx D E Isx Aptst Features: 20-ton splitting force – effective splitting of larger logs. Electric drive – economical, quiet, and clean operation without exhaust fumes. Hydraulic feed and pressure – stable log guidance and improved operator safety. Ejector angle adjustment – ​​modify the direction of split biomass removal. Hydraulic guide and lift adjustment – ​​conveniently adjust the position of the working material. Cutting and splitting function – one tool for two key woodworking operations. Sturdy construction – a durable and stable frame for intensive use. Ergonomy and work comfort – intuitive operation and convenient settings increase productivity. Versatile use – suitable for farms, workshops, and firewood processing. Wedge, 8-piece knife - price €130 (paid additionally). Wedge, 4-piece knife - price €100 (paid additionally). Hydraulic log feeder for firewood processors - price €1,150 (paid additionally).

Condition: new, Year of construction: 2026, Engine power: 21 HP Splitting force: 20 tons LONCIN engine Operating pressure: 16 - 20 MPa Cylinder: Ø101.6 x 610 mm Maximum log diameter: 480 mm Maximum log length: 610 mm Cycle time: 6 - 8 s Return time: 3 s Splitting wedge: 6 arms OREGON guide bar: 22" Chain: 74 links, 0.75" Saw/splitter drive: hydraulic motor/gear pump Conveyor belt: 6800 x 250 x 4 mm Tires: 13" Shipping dimensions (W x L x H): 2250 x 1000 x 1200 mm Gross weight: 790 kg Splitting force 20 tons – efficient work with larger logs. Combustion engine – independence from mains power and field operation. Hydraulic feed and pressure – stable material guidance and increased safety. Ejector angle adjustment – ​​precise control of ejected material. Dkodpfx Aoyx D Dweptot Hydraulic guide and lift adjustment – ​​convenient adjustment of the working position. Cutting and splitting function – one device for two key stages of wood processing. Robust construction – durable frame for intensive use. Ergonomic operation – intuitive operation and comfort of use. Universal application – suitable for field use, firewood processing, and heavier work. Wedge, 8-piece knife - price €130 (paid additionally). Wedge, 4-piece knife - price €100 (paid additionally). Hydraulic log feeder for firewood processors - price €1,150 (paid additionally).

Condition: excellent (used), Year of construction: 2019, operating hours: 7,000 h, functionality: fully functional, MACHINE CONSTRUCTION: - Cast iron bed, spindle head, and saddle system developed through computer-aided design and analysis (CAD/CAE), ensuring high rigidity and vibration damping - Fully supported table guide in every working position - X-axis (table movement) on 2 precision cylindrical roller guides, supported by 6 runner blocks each - Y-axis with 2 precision cylindrical roller guides - Z-axis with hardened and ground guideways, with TURCITE-B coating - Guideway protection via metal telescopic covers - Hydraulic counterweight / balance system - CE conformity Axes: - Preloaded ballscrews with large pitch for long-lasting precision - Digitally controlled, liquid-cooled ballscrew on the X-axis - Gear-driven ballscrews, ballscrew nuts with centralized lubrication, and lifetime-lubricated bearings CONTROLLER & ELECTRONICS + CAPACITY: - High-speed CNC, 1 ms block processing time - Storage capacity: 120 GB SSD - Technology program memory: 100 GB SSD - Number of processor cores: 4 CNC operating system: - User interface operating system: Windows 10 - Technology program storage: WINDOWS file system Dkjdpszzf Ruefx Aptet - Total storage capacity (system program, PLC, parameters, technology program memory) on a single SSD - New user interface (40-00005216-00w) SCREEN: Color graphical LCD touchscreen COMMUNICATION: USB, Ethernet, EtherCAT MEASURING SYSTEM: - HEIDENHAIN absolute EnDat 2.2 - PROGRAMMING: ISO, myNCT TECHNICAL DATA: - X-travel: 2100 mm - Y-travel: 1500 mm - Z-travel: 1000 mm Distance from spindle nose to table surface: 200~1000 mm Distance between columns: 1650 mm Distance between table and gantry/crossrail: 1710 mm AXES: - Rapid traverse speed X / Y / Z axis: 20 / 20 / 15 m/min - Max. working speed: 10 m/min - Motor power: 4 kW ACCURACY (according to JIS6338): - Positioning accuracy: +/- 0.01 mm (In the entire working area!) - Repeatability: +/- 0.004 mm TOOLING: - Max. tool diameter / with adjacent tool omitted: 125 / 215 mm - Max. tool length: 400 mm - Max. tool weight: 20 kg - Optional tool taper: SK50 Accessories & Equipment: - Angle head (manual) - Chip conveyor - Coolant flush gun - 15 pcs of SK50 tool holders - Machine leveling feet - Manuals The machine is in good used condition and operates accurately.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, workpiece length (max.): 3,048 mm, workpiece width (max.): 1,524 mm, sheet thickness (max.): 3 mm, table load: 5,000 kg, No minimum price – guaranteed sale to the highest bidder! The machine’s control system and software have been renewed! TECHNICAL DETAILS Sheet thickness for circuit boards with a tensile strength of 400 N/mm² max.: 3.5 mm Sheet thickness min.: 0.5 mm Punch head force max.: 4 presses with max. force of 7 t & 4 presses with max. force of 26 t Force of the lower cylinder max.: 6 t Double-punch punching force: 12 t (2 hydraulic punches) Length of the input sheet min.: 370 mm Length of the input sheet max.: 3,048 mm Width of the input sheet min.: 300 mm Width of the input sheet max.: 1,524 mm Diagonal of the input sheet max.: 3,408 mm Length of the output sheet min.: 250 mm Length of the output sheet max.: 3,048 mm Width of the output sheet min.: 60 mm Dedpfx Aezzkt Ujptjkt Width of the output sheet max.: 1,524 mm Vertical travel of the scissor lift table: 550 mm Usable load capacity of the scissor lift table: 5,000 kg Dimensions of the transportable stack of sheets min.: 300 x 100 mm MACHINE DETAILS Electrical data Voltage: 380 V Frequency: 50 Hz Current: 119 A Rated power: 61 kW Cooling capacity of the unit: 32.2 kW EQUIPMENT Scissor lift table TC27155C Motorized roller bed PRL3814F Universal destacking device DUF15 Punch head H2 Oil-dynamic hydraulic unit C1515 (3-part pump unit) Lower cylinder EI09 Double rotating punch P2R36 Water-air cooling unit R121 Refrigerant R407C Software RIO Control and management system MMACHNT-MICROMach Processor PENTIUM INTEL II 400 Mhz WINDOWS NT Documentation The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day or part thereof will be charged. The fee must be paid before collection. The sale is made with the exclusion of any guarantee or warranty. The information on the technical data comes from the original offer. No liability is accepted for typing or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: good (used), Year of construction: 1997, functionality: fully functional, operating hours: 9,350 h, travel distance X-axis: 1,530 mm, travel distance Y-axis: 1,220 mm, travel distance Z-axis: 1,140 mm, workpiece weight (max.): 2,000 kg, number of slots in tool magazine: 90, controller manufacturer: Fanuc 15M, total height: 3,930 mm, total length: 7,760 mm, total width: 4,470 mm, overall weight: 22,000 kg, number of spindles: 1, rotary table diameter: 800 mm, spindle nose: MAS 403 BT50, spindle speed (max.): 5,000 rpm, operating hours of spindle: 9,350 h, Equipment: chip conveyor, documentation/manual, Niigata HN 80 C Fanuc 15M 5-Axis horizontal machining centre whit low hours and EXSTENDED AXIS X Y Z Fanuc 15M control travel distance X-axis: 1530mm travel distance Y-axis: 1220mm travel distance Z-axis: 1140mm Pallet width: 800X800mm / 3 palettes Max load 2000kg spindle speed (max.): 5000 rpm Dkedpfx Apet Rgz Tstot Spindle nose MAS 403 BT50 90 pcs of tools in tool magazine True spindle coolant Oil mist lubrication of spindle bearings Spindle oil cooler Turn table around Y-Axis diameter 800mm Hydraulic spindle box lightening Automatic power off RS-422 Port Electric pulse handwheel Renisaw MP-7 Probe Post processor for Cam for the software "Autodesk Fusion 360"

Condition: excellent (used), Year of construction: 2018, 2500 litre system for cooking and cooling ready meals, soups, broths, fruit preparations, jams and marmalades, traditional and international dishes, sauces and pastes, confectionery. Installed new in 2018 at a cost of over £450,000 Djdpfjw Rn S Uex Aptokt

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 7312 - 3089 - FA, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,200 mm, total height: 350 mm, type of input current: AC, total width: 550 mm, total length: 850 mm, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,200 mm, overall weight: 10 kg, input voltage: 220 V, Equipment: documentation/manual, type plate available, HEXAGON ROMER Absolute Arm 7312 + PolyWorks 2025 Inspector Probing™ + HP ZBook For sale is a very well-maintained and lightly used HEXAGON ROMER Absolute Arm 7312 portable measuring arm, manufactured in 2015. The system was used exclusively in a metrology laboratory and is in excellent technical condition. Included in the sale is a fully configured HP ZBook industrial workstation laptop with current PolyWorks Metrology Suite 2025 / Inspector Probing™ software including transferable dongle license. The measuring arm is ready for immediate operation. Last calibration was performed on 12.01.2022. Technical specifications: * Model: RA7312 * Measuring range: 1.2 m * Arm weight: 10.2 kg * ISO 10360-2 * MPEp: 8 µm * MPEE: 5 + L/40 ≤ 18 µm Technical equipment / scope of delivery: * HEXAGON ROMER Absolute Arm 7312 * Absolute Encoder technology * Integrated digital camera and work light * Haptic feedback * Ergonomic handle * Zero-G counterbalance * Mounting plate * TESA TKJ * Probes with 3 mm / 6 mm ruby ball and 15 mm steel ball * Certified reference bar for 1.2 m measuring range * Total length 305 mm * Including certification * Calibration sphere * Magnetic mount * Transport case * Dust cover * B89 certificate Software / system environment: Djdpfx Asy Ta A Esptekt * PolyWorks Metrology Suite 2025 IR10.2 * Inspector Probing™ * Installed and fully operational software environment * Dongle-based license * Transferable license * Pre-configured measurement system * Ready for immediate use * ROMER arm fully integrated and operational Notebook / hardware: * HP ZBook Workstation * Intel Core i7 processor * 16 GB RAM * NVIDIA graphics card * SSD storage * USB 3.0 * WiFi / Bluetooth Transport / dimensions: * Portable measuring system * Total weight including transport case approx. 20 kg * External dimensions of transport case approx. 850 x 550 x 350 mm * Heavy-duty original transport case included Special features: * Used exclusively in metrology laboratory * Lightly used * Complete package * Ready for immediate use * Current software environment * Portable coordinate measuring technology * Precision measuring arm according to ISO 10360-2 * Ideal for quality assurance, reverse engineering, tool and mold making Inspection and functional test possible by appointment. Sale preferably to commercial buyers. Subject to prior sale and errors excepted.

Condition: like new (used), Hydraulic log lifting device for the Uniforest 40/20 log splitter. Djdpfxozun Rwo Aptskt A telescoping hydraulic lifting table, up to 4 m in length, makes the work easier for the operator. It can be powered by a power take-off, an electric motor, or a combination of both.

Condition: used, Year of construction: 2008, total length: 15,000 mm, total width: 3,100 mm, total height: 3,150 mm, overall weight: 15,000 kg, Equipment: CE marking, No. 04553 Drum dryer / firewood drying system S&Ü SHT 50 Used, year of construction 2008 Suitable for drying firewood as well as other bulk and piece materials, e.g. wood chips, sawdust or compost Container volume 58 m3 Filling volume approx. 50 m3 of bulk material Drum diameter 2500 mm Overall length approx. 15000 mm Overall width approx. 2900 mm Empty weight approx. 12530 kg Loading via filling hopper, e.g. by wheel loader or conveyor system Internal conveying spiral for transporting and turning the drying material Drum drive via electric geared motor and multiple-chain drive Drum speed adjustable via frequency converter Automatic drying operation with timer control Fan speed adjustable via frequency converter Hydraulically liftable filling hopper for unloading Unloading by reversing the direction of drum rotation Drying time depending on initial moisture content, type of material, hot air volume and temperature Typical drying time for firewood approx. 5 - 7 days at approx. 200 kW heating capacity Heat exchanger: Max. heating capacity approx. 250 kW At 90 °C water supply temperature Medium flow rate approx. 12 m3/h At 15 °C outside temperature Hydraulic unit 3 kW Fan 7.5 kW Drum drive 8 kW Noise emission approx. 98 dB(A) with optimum filling level Current consumption 45 A Djdpfjztrpzsx Aptjkt Fuse protection 63 A Voltage 400 V, 3L/PEN Frequency 50 Hz Hydraulic oil capacity 10 l Transport dimensions approx. 15000 x 3100 x 3150 mm LWH Weight approx. 15000 kg Sale on behalf of customer, ex location near 63452 Hanau, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: refurbished (used), Year of construction: 2003, operating hours: 15,000 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 534 mm, feed length X-axis: 762 mm, feed length Y-axis: 305 mm, feed length Z-axis: 534 mm, torque: 45 Nm, controller manufacturer: Haas, total height: 2,700 mm, total length: 2,200 mm, total width: 1,750 mm, table width: 267 mm, table length: 1,213 mm, rotational speed (max.): 6,000 rpm, overall weight: 1,315 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, spindle nose: CT40/ISO/BT40, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Three-axis vertical CNC milling machine Haas TM-1HE, numerically controlled, with a 6000 rpm spindle. The machine is being sold by Haas service technicians with 10 years of experience. The machining center has undergone a complete, comprehensive inspection; it has been refurbished and is ready for operation. The mill is equipped with a range of additional options: - Higher-speed spindle up to 6000 rpm - Rigid tapping - Rotation & scaling - M19 spindle orientation - Macro programming - HSM (High Speed Machining) - IPS (Intuitive Programming System) - Possibility to activate 4th axis after adding servo amplifier and wiring; can be sold separately (fourth axis option) - Air coolant system Machine Information: - Machine type: Three-axis vertical milling machine Haas TM-1 Dsdpfxoyanlaj Aptekt - Serial number: 33515 - Manufacturing date: 12/03 - Spindle speed: 6000 rpm - X-axis travel: 762 mm - Y-axis travel: 305 mm - Z-axis travel: 534 mm - Minimum spindle-to-table distance: 102 mm - Maximum spindle-to-table distance: 636 mm - Table size: 1213 × 267 mm - T-slots: 3 slots, 16 mm wide - Overall dimensions (W × D × H): 220 × 175 × 270 cm - Weight: 1315 kg - Spindle motor power: 5.6 kW - Maximum torque: 45 Nm - Spindle taper: CT40 / ISO / BT40 - Voltage: 366/425 V - Phase: 3 - Full load current: 13 A - Frequency: 50/60 Hz - Largest load current: 16 A The machine has undergone a full, comprehensive inspection. All of the following components have been checked and verified: - Ballscrews - Linear guides and ways - Lubrication system - Spindle assembly - Spindle motor - Encoder - Vector drive - Servo amplifiers - I/O board - Processor board - All electrical cabinet components - Axis drives - Tool change system - CNC controller - Additional subsystems and components The machine is fully refurbished and ready for immediate operation.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, We have a Buhrs - W+D BB700 16K S1 year 2011 servo envelope inserting system available. The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2011 Configuration: - 6 station base - 4x RF2 rotary feeder - 2x HF vacuum friction feeder - Divert bin 1 - On-edge conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm Dkjdpfx Apeyxm Hzotet 16,000 cycles per hour

Condition: like new (used), Year of construction: 2023, machine/vehicle number: 320539B, functionality: fully functional, power: 1.7 kW (2.31 HP), type of input current: three-phase, workpiece width (max.): 1,250 mm, workpiece height (max.): 50 mm, number of axes: 3, number of slots in tool magazine: 4, actuation type: electric, total height: 1,890 mm, total length: 2,900 mm, total width: 1,650 mm, overall weight: 1,400 kg, table length: 99,999 mm, table width: 1,300 mm, Equipment: CE marking, We are offering this virtually new Vitap K3 throughfeed machining center, manufactured in 2023. Additional equipment: 20" LCD TFT monitor Industrial PC WSC user interface with Lister, parameter tools, and parametric settings Graphical CAD programming TPA EDI32, basic version USB port Storage of all files Macro programming DXF file import CE compliant Advantages of the machine: Qualitative machine advantages Technical advantages of the machine: Feed rate: 25 m/min Automatic 4-position tool changer Max. Horizontal tool Ø: 12 mm Max. Vertical tool Ø: 35 mm Motor: 1.7 kW Number of independent vertical axes: 12 // number of independent horizontal axes on the X-axis: (2+2) Max. Horizontal drilling depth on X and Y axes: 35 mm // max. Vertical drilling depth: 43 mm // number of horizontal drilling spindles on the Y-axis: (2+2) Electrospindle: 5 kW with ISO30 taper (rpm 12000-24000) Max. Workpiece dimensions: Y 1250 mm, Z 50 mm Min. Workpiece dimensions: X 270 mm, Y 150 mm, Z 3 mm Additional information: Axes: 3 controlled axes (X, Y, Z) X-axis: DDT feeding system Y-axis: drilling head movement Z-axis: drilling operations Optional upgrades (at an extra cost): Tool set for production start Tool holder ISO 30 / ER 32 Lubricant cartridges PC with more powerful processor Extra pneumatic top pressure Nesting system Barcode scanner Post-processor for MPR files License for TPA office software Front and rear roller support Narrow part guides Optional clamping opening for 60 mm thickness Options for angular transmission CAD design software for furniture construction *There may be differences between the displayed data and the actual values. *There is no warranty on this machine; the price is an "as is" price. If you have any questions or would like more information, please feel free to send us a message or call us. Available for pickup in Enkhuizen around the beginning of October 2026. Dodpjzv U Ncsfx Aptjkt

Condition: used, Leica Reichert Lynx Microscopy Tissue Processor Dedpfx Asxzidfsptskt

Condition: used, This listing is for Stratec Gemini 6280 Compact Microplate Processor The unit is in full working condition and ready for immediate use The Stratec Gemini 6280 is a fully automated microplate processor optimized for low to mid-throughput ELISA assays. It seamlessly integrates sample pipetting, incubation, washing, and photometric reading into a space-saving, walk-away platform. Equipped with barcode tracking and intuitive software, it ensures exceptional process safety and reproducible results for clinical and research laboratories Transparency Report and Technical Audit: • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform full diagnostic assay validation • Source Pedigree: Biotech / Research Facility Djdjzavi Tjpfx Aptekt • Condition: Direct-from-Bench (Decontaminated/Original)

Condition: used, Tepla Tepla 400 SC 230 Volt, 13A, 50/60Hz Pressure: 4-6 bar Scope of delivery: (See images) Dkjdpfxezh Drqs Aptot We are happy to answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, We have a Buhrs - W+D BB700 16K S1 year 2011 servo envelope inserting system available. The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2011 Configuration: - 6 station base - 4x RF2 rotary feeder - 2x HF vacuum friction feeder - Divert bin 1 - On-edge conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: Dkodpfowml S Esx Aptet - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15066, 1 x Atwell Labellers Ltd inline 3-head side-apply labelling machine with ICE Zodiac ES 8.4 Clarity thermal transfer printer. Mounted on height-adjustable frame. It is designed to apply labels to a variety of containers including bottles, jars, cans, and tubs, making it suitable for diverse packaging needs. The label dispensers are run by a servo / stepping motor and is controlled by a micro-processor. Manufacturer - Atwell Labellers Ltd and EME etiketteringsmaskiner ApS. Models of Labelling Heads - 2 x EME Series 4000 and 1 x EME Series 2000. Model of Conveyor Section - EME MO-3000-S4-S2. Serial Number - 15066. Date of manufacture - 2015. Dodpfxjy Hkqyj Aptokt Belt - slatted, 85mm wide. Overall dimensions - 3000mm long x 1500mm wide x 1300mm high (adjustable - can go higher).

Condition: as good as new (ex-display), functionality: fully functional, type of input current: three-phase, total width: 770 mm, total length: 1,030 mm, total height: 1,100 mm, input voltage: 400 V, saw blade diameter: 700 mm, working height: 700 mm, overall weight: 93 kg, Description: • Enclosed and secure saw area for increased safety, complying with legally mandated saw blade guard • Anti-twist device for logs thanks to punched-in retaining claws in the rocking table • Stable, torsion-resistant steel frame • Transport wheels for easy mobility • Impact, scratch, and weather resistant due to high-quality powder coating • Phase inverter Technical Data: Dimensions and Weight: Length (product) approx.: 1030 mm Width/Depth (product) approx.: 770 mm Height (product) approx.: 1095 mm Net Weight approx.: 92.5 kg Working height: 700 mm Rocking table support: 740 mm Drive: Drive type: Electric motor with direct drive Electrical Data: Connection voltage: 400 V Mains frequency: 50 Hz Output power: 3.835 kW Input power: 5 kW Noise emission: Djdpfxjyddm Us Aptokt Sound pressure level Lp: 101 dB(A) Sound power level Lw: 115 dB(A) Saw blade: Saw blade circumferential speed: 51.3 m/s Saw blade diameter: 700 mm Cutting capacity: Max. cutting capacity, rocking table round timber: 250 mm Scope of delivery: 1 x carbide-tipped saw blade Ø 700 mm