Used Cranes for sale (4,889)

Condition: used, Year of construction: 2017, operating hours: 12,966 h, lifting height: 4,500 mm, fuel type: diesel, mast type: duplex, motor manufacturer: Volvo, fork length: 2,400 mm, Weights Empty weight: 23.600 kg Functional Lifting capacity: 1.600 kg Maximum passing height: 389,5 cm Number of valves: 3 CE mark: yes Kdedpfswu E Nasx Aadew Condition General condition: average Technical condition: average Visual appearance: average Other information Fork carriage: Fork spreading Production country: SE Additional information Please contact Bas Sindorf for more information

Year of construction: 2025, condition: like new (used), Portalkran 2x125 ton 30 Meter Hubhöhe Baujahr 2014 Kdjdpfx Aegmdnfjadew

Condition: used, machine/vehicle number: W09NTG2385EN1xxxx, Year of construction: 2005, Please contact ATS Norway for more information Please provide reference number upon request: 21587 Specifications: Kdsdpoxp At Nefx Aadew 2 axles Forced steering on 2nd axle Upper deck length: 3.34 meters Decent tires Permitted total weight: 38,000 kg Ready for delivery Technical approved: Yes EU-approved until: 23.11.2025 Own weight: 7220 Total Weight: 38000 Width: 247 Length: 1027 Model: Kransemi

Condition: good (used), machine/vehicle number: 2815, Year of construction: 2016, load capacity: 45,000 kg, lifting height: 15,300 mm, mast type: telescopic, total length: 11,500 mm, total width: 4,150 mm, operation weight: 74,500 kg, additional equipment features: Hydraulic sliding cabin, Dual tread, Front mud guards, Centralized greasing system, Equipment: lighting, SMV KONECRANES 4531 from Uniktruck Kjdpfjquwmvex Aadedw

Condition: used, mileage: 10,350 km, lifting height: 35,000 mm, Year of construction: 2023, operating hours: 994 h, Drivetrain Drive: Wheel Weights Empty weight: 29.900 kg Functional Lifting capacity: 19.640 kg Identification Serial number: 1190603 Kodpfx Aaovbaqgedodw Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 9.99x2.55x3.95 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), functionality: fully functional, STAHL single girder trolley / running trolley with complete hoist Load capacity: 3.2 t Reeving: 4/1 Floor control / pendant control Year of manufacture: 1994 Further data such as hoisting speed fast/slow see nameplate Kodpfx Ajwaflfsadodw Very good condition, complete with all accessories including control panel and pendant control station TOP PRICE!! From large spare parts stock, see also my other offers Info: we have over 20,000 DEMAG items in stock! Over 2,000 DEMAG spare parts in our warehouse! Check out my other offers from my stock as well!

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Type: 1 x LND 230 S 70 - 230 kg, 11.20m x 7.30m, H 4.25m, year 2023 3 x LNED 230 S 70 - 230 kg, 55m x 7+7m, share the same track in the middle - Left+Right, years 2017+2020+2023 1 x LKD 250 S 70 - 250 kg, 14m x 8m, year 2019 Kdjdewzmi Ujpfx Aadew 1 x LKD 500 S 70 - 500 kg, 26m x 8m, year 2019 1 x LKD 500 S 70 - 500 kg, 26m x 8m, year 2022

Condition: good (used), mileage: 17,411 km, color: white, lifting height: 60,000 mm, Year of construction: 2017, operating hours: 2,503 h, Drivetrain Drive: Wheel Make of engine: Daimler AG Weights Empty weight: 48.000 kg Functional Mast length: 6.000 cm Lifting capacity: 84.000 kg CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: W09100440HWG12044 / 41004044 Other information Emission level: Stage IIIA / Tier III Kjdpjxlnayofx Aadodw Delivery terms: EXW Carrier engine: OM470LA.E4-1 Upper hours: 9246 h Counterweight: 26200 Transport dimensions (LxWxH): 13,597x2,75x4,023 Production country: DE Min boom length: 1100 cm Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: new, Year of construction: 2020, functionality: fully functional, power: 320 kW (435.08 HP), Brand new Mercedes-Benz OM 470 engine. Suitable for multiple cranes. Contact for price and other engines available. Kdsdpfsxw R Dxex Aadow

Condition: good (used), Year of construction: 2007, Working area X 4000 mm, Y 2000 mm, Z 115 mm Weight 16000 kg parameters L x W x H: approx: 9800 mm x 5300 mm x 2000 mm Siemens Sinumerik 840 D type of laser TruFlow 4000 W max thickness 20 mm 4000 mm x 1250 mm feed 3400 mm Dismantling, loading, crane is not in price of machine - plus price per all services NC: 88631 - Resonator/HD pump 1: 87603 - Beam on/pump 2: 53667 Technical parameters:- Designation: KNC/H 1500/65- Maximum temperature: 650 °C- Recommended operating temperature range: 300°C – 600°C- External dimensions approx. (wxhxd): 2800x3200*x2100mm * height including structure for door when hydraulically opening- Internal dimensions (wxhxd): 1500 x 1000 x 1000 mm- Number of heating zones: 1- Maximum batch weight: 1000 kg- Melting Kodpfx Aaevtm Szedodw power: 48 kW- Furnace weight: 1300 approx. kg- Voltage: 3/PEN 400/230V AC 50 Hz- The damper is part of the furnace, serves for automatic temperature control in the furnace and is controlled by the program from the controller. - includes technical documentation in Slovak - protocol of measurement and optimization of the temperature field to meet the DIN 17052-1 standard ΔT10°C in the internal working space (in an empty furnace at Tmax) \- Technical documentation is in SJ. Manufacturer: LAC, s.r.o., Czech Republic Year of Production: 2021 This is an electric furnace, the heating system of which consists of heating resistance elements located near the fan unit. Through the heating branches, the fan ensures circulation of the atmosphere in the heating space and thus heating of the working atmosphere and the charge in the furnace. The working chamber of the furnace is equipped with a separately regulated heating unit in the rear wall of the furnace. The furnace is equipped with a radial circulation fan with a horizontal shaft to ensure uniform temperature distribution throughout the working space of the furnace. The circulation fan drives the heated air through the circulation channels of the circulation insert. All rotating parts are located under a cover against accidental contact. The temperature profile of the device is controlled by a PID programmable INDUSTRY controller. This controller allows the creation of up to 30 heat treatment programs depending on the needs of the processing technology and the properties of the processed batch. Dimensions see. appendix.

Condition: ready for operation (used), Chain Hoist, Rema SR Star 090/55, 8 Meters, 3200 kg, Used Machine Manufacturer: Rema SR Model: Star 090/55 Kdjdpfexxiivex Aadow Overall Dimensions: Width: 650 mm Depth: 350 mm Height: 460 mm Electrical Data: 400V; 2.2 kW; 4.8A Load Capacity: 3200 kg Lifting Height: 8 m In the condition shown in the pictures!

Condition: excellent (used), Professional workshop crane with counterweight and hydraulic drive. Very good condition, fully operational, ready for use. • Model: Hydrobull HB 500 GK • Manufacturer: E. Ziegler GmbH, Renningen (Germany) • Year of manufacture: 2004 • Lifting capacity: 500 kg • Lifting height: 280 cm • Jib length: 150 cm • Counterweight: 850 kg • Own weight: approx. 1200 kg (350 + 850 kg GG) • Outreach range: A1–A7 (240–500 kg, according to load chart) • Steel construction, mobile on industrial wheels • Hydraulic lifting and lowering of the jib • Technical and visual condition: very good Kjdpfx Ajxmt H Ijadsdw

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 380 mm, roller (top) diameter: 380 mm, side roll diameter: 300 mm, working width: 3,100 mm, sheet thickness (max.): 25 mm, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT * The lower, upper and side rolls move up and down linearly, operated by hydraulic pistons connected to the frame * Protected against overloading * Upper and side rolls are driven by hydromotors and planetary gearboxes (all three rolls are motor-driven) * The positions of the rolls can be easily read via three digital displays * Rolled parts can be easily removed with hydraulically opening head and automatic lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame Kodoxw Ecvspfx Aadedw * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) to support large-diameter bending * Hydraulic side supports to assist with large-diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending Capacity : 16/20 mm Bending Capacity : 20/25 mm Top & Bottom Roll Diameter : 380 mm Side Roll Diameter : 300 mm Motor Power : 31.5 kW Bending Speed : 1.5 - 5 m/min Length : 5850 mm Width : 2250 mm Height : 2350 mm Weight : 19,200 kg

Condition: good (used), mileage: 44,412 km, color: white, lifting height: 60,000 mm, Year of construction: 2017, operating hours: 4,749 h, Drivetrain Drive: Wheel Make of engine: Daimler AG Weights Empty weight: 48.000 kg Functional Mast length: 6.000 cm Lifting capacity: 84.000 kg CE mark: yes Condition Technical condition: good Kdedpfxexlnate Aadow Visual appearance: good Identification Serial number: W09100440HWG12043 / 41004043 Other information Emission level: Stage IIIA / Tier III Delivery terms: EXW Carrier engine: OM470LA.E4-1 Upper hours: 7184 h Counterweight: 26200 Transport dimensions (LxWxH): 13,597x2,75x4,023 Production country: DE Min boom length: 1100 cm Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: used, mileage: 3,91,200 km, power: 368 kW (500.34 HP), first registration: 06/2019, overall weight: 26,000 kg, fuel type: diesel, axle configuration: 3 axles, maximum load weight: 11,995 kg, empty load weight: 13,930 kg, tire size: 385/65R22,5, wheelbase: 4,200 mm, brakes: intarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 6,100 mm, rear tire size: 315/80R22,5, number of seats: 2, maximum speed: 90 km/h, number of beds: 1, Equipment: ABS, additional headlights, air conditioning, central locking, compressed air brake, crane, cruise control, differential lock, onboard computer, parking heater, truck registration, | MAN TGX 26.500 6x4X4 HydroDrive timber transporter | Palfinger M12Z105 crane with timber grapple 2019 | Pritarder | Leather interior, leather steering wheel, auxiliary air conditioning, | Automatic, retarder, EURO6, adaptive cruise control, | Multifunction steering wheel, cruise control, emergency brake assistant, | Seat heating and seat ventilation, auxiliary heating, air conditioning, navigation, | Loading length: 6.10m | Leaf/air suspension, | Wheelbase: 4200/1350mm | Alloy rims, | 3rd axle steering axle and lift axle, | Trailer coupling 50mm | Rear view camera | Engine new approx. 15000km ago | TRAILER IS ALREADY SOLD | Errors, input and advance sales reserved. Kodpevia Emofx Aadjdw

Condition: good (used), functionality: fully functional, fuel type: diesel, Year of construction: 1995, load capacity: 45,000 kg, machine/vehicle number: 051566, Equipment: cabin, crane, Product Description used Truck Crane machinery Manufactured by KATO Model KR45H-V Truck mounted moving crane with 38 m boom height Machine sold as its condition More information please contact VIJAY Kdedpfx Aaoul Uwredew JPN Industrial Trading Pte Ltd 13A Pandan crescent, Singapore 128478

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 400 mm, roller (top) diameter: 400 mm, side roll diameter: 300 mm, working width: 2,550 mm, sheet thickness (max.): 40 mm, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, STANDARD EQUIPMENT * Upper, lower, and side rolls are linearly moved up and down by hydraulically actuated pistons attached to the frame * Protected against overload * Upper roll and side rolls are driven by hydromotors and planetary reducers (3 roll motor drive) * The position of the rolls can be easily read with three digital indicators * The hydraulically opening head and the automatically lifting shaft allow the bent part to be removed easily * Very easy operation with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) to support large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280-320-350-380-400-460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 25/30 mm Bending: 30/40 mm Upper & Lower Roll Diameter: 400 mm Kdedpfx Asxw Ebxjadsw Side Roll Diameter: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 5350 mm Width: 2250 mm Height: 2350 mm Weight: 17,800 kg

Condition: new, power: 375 kW (509.86 HP), overall weight: 26,000 kg, fuel type: diesel, axle configuration: 3 axles, maximum load weight: 11,085 kg, empty load weight: 14,835 kg, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,480 mm, loading space length: 6,300 mm, loading space height: 900 mm, number of seats: 2, number of beds: 1, Equipment: ABS, air conditioning, central locking, compressed air brake, crane, cruise control, differential lock, fog lights, onboard computer, parking heater, truck registration, | Volvo FH 500 6x2 flatbed with Palfinger crane with radio remote control | I-Shift, Redarter | axle scales | Led headlights | 5 hydr. extensions | automatic, EURO 6 | trailer coupling | heated seats, auxiliary heating, air conditioning, refrigerator | cruise control, el. Tires 385/55/R22.5 | Internal load dimensions: L: 6.30m, W: 2.48m, side wall height 0.90m | Total length 10.12 meters Mass A 10.00 meters | Subject to errors, omissions and prior sale. Kedpfx Aajvh U Tcodsdw

Condition: used, functionality: limited functionality, Year of construction: 1992, machine/vehicle number: GM00193, Equipment: cabin, crane, hydraulics, USED KOBELCO HYDRAULIC CRAWLER CRANE MANUFACTURE: KOBELCO MAXIMUM CAPACITY: 45TON GOOD WORKING CONDITION Max. capacity 45 TON Main boom foot pin horizontal offset X 950MM Max. slewing speed 5RPM Max. line speed 70 m/min Max. torque 580 Nm at 1600 rpm Kjdpoul Ukxofx Aadedw Boom erecting up to 80° in - seconds MACHINE SOLD AS IT IS CONDITION FOR MODE DETAILS PLEASE CONTACT VIJAY JPN INDUSTRIAL TRADING PTE LTD 13A PANDAN CRESCENT SINGAPORE - 128478

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 320 mm, roller (top) diameter: 320 mm, side roll diameter: 240 mm, working width: 2,050 mm, sheet thickness (max.): 25 mm, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, STANDARD EQUIPMENT * The lower, top, and side rolls move linearly up and down via hydraulic pistons fixed to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor driven) * Roll positions are easily readable via three digital indicators * Easy removal of the bent workpiece thanks to the hydraulically opening head and the automatically ascending shaft * User-friendly operation with a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) forged or rolled steel shafts, induction-hardened * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Infinitely variable speed control system * Electronic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 2050 mm Pre-bending : 16 / 20 mm Bending : 20 / 25 mm Top & Bottom Roll : 320 mm Side Roll : 240 mm Motor Power : 20 kW Bending Speed : 1.5 - 5 m/min Length : 4350 mm Width : 1800 mm Kodpfexw Eblox Aadsdw Height : 1950 mm Weight : 10,500 kg

Condition: new, empty load weight: 4,400 kg, maximum load weight: 11,600 kg, overall weight: 16,000 kg, axle configuration: 2 axles, suspension: air, tire size: 550/45R22,5, wheelbase: 1,200 mm, Equipment: ABS, additional headlights, fog lights, Steindl Palfinger forestry trailer 16 tonnes | Articulated drawbar with 2 cylinders, gearbox support foot, | 10 stanchion holders welded to the outside of the frame, 4 pairs of stanchions, | LED Stvo lighting system | Tires 550/45-22.5, FLAP-DOWN | Extendable frame, HEXAGONAL FRAME | 4 drum brakes o350mm for 8-hole rim - swing arms with wheelbase 1.20m | Pneumatic brake system with 2 Tristop cylinders and 2 diaphragm cylinders including wheel chocks, | License plate lighting and type approval 25 km/h | Bottom hitch | Support load: 2,000kg Errors, input and advance sales reserved. Steindl Palfinger forestry crane L | Standard equipment 9.5m RW including 4.5 tonnes flange rotator | 4-tab load sling (EPS-LINK), EPSILON crane column | Swivel mechanism with 4 swivel cylinders 2-circuit hydraulics CAN-BUS joystick control with 2 x 4-way control blocks electrically proportionally controlled including high stand, tarpaulin and high pressure filter, including BSZ plus an AUTEC radio remote control Hydraulic oil tank with 100 litres of hydraulic oil Hydraulic oil cooler with thermostat control Lifting cylinder protection Forestry package: Chainsaw, canister and sapling holder Headlight kit with 2x LED (1000 lumens) 2-rotary piston pump with console for universal joint drive and hydraulic oil 2x40 lt/600 rpm including screwed flange universal joint shaft Wood grapple with opening width 157 cm (0.30 m2), with flange rotator, reinforced version Kjdpferm S D Eex Aadodw

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (top) diameter: 180 mm, side roll diameter: 150 mm, working width: 1,550 mm, sheet thickness (max.): 9 mm, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, STANDARD EQUIPMENT - Highly suitable for bending light and medium sheet metal, as well as aluminum or stainless steel materials - Ideal for rolling materials into round shapes and various diameters - Lower roll and side rolls operate via direct linear hydraulic up/down movement - Protected against overloading - Upper roll driven by electric motor and planetary gearbox. Lower roll driven via cardan coupling system. Two rolls feature powered rotation - Roll positions easily read via three digital indicators - Rolled part can be easily removed thanks to hydraulically opening head - Very easy operation with mobile control panel - Welded steel construction body - SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts - Cone bending device - Hydraulic balancing system for parallel movement of the rolls - Conforms to EU safety standards and CE marked - User manual OPTIONAL EQUIPMENT - Remote assistance via NC control - Upper crane (elevator) for supporting large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Dual-speed adjustment system - Infinitely variable speed adjustment - Rotation powered by hydromotor - Extraction system Kdodpfoxw Eanex Aadew TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Pre-bending: 5/7 mm Bending: 7/9 mm Upper & Lower Roll: 180 mm Side Roll: 150 mm Min. Bending Diameter: 270 / 900 mm Motor Power: 4 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 3350 mm Width: 1350 mm Height: 1290 mm Weight: 2900 kg

Condition: new, Year of construction: 2025, number of rollers: 4, roller (top) diameter: 180 mm, side roll diameter: 150 mm, working width: 2,050 mm, sheet thickness (max.): 8 mm, STANDARD EQUIPMENT - Ideally suited for bending light to medium gauge steel, aluminum, or stainless materials - Perfect for bending round and various diameter materials - Lower roll and side rolls move up and down hydraulically with direct linear motion - Protected against overload - Top roll driven by electric motor and planetary gearbox; lower roll driven by cardan shaft coupling system; two rolls are power-driven - Roll positions can be easily read via three digital displays - Hydraulically opening head allows for easy removal of bent parts - Movable control panel ensures very easy operation - Welded steel construction frame - SAE 1050 (CK45) induction-hardened forged or rolled steel shafts - Conical bending system - Hydraulic balancing system for parallel movement of the rolls - Compliant with EU safety standards and CE certified - Operating manual included OPTIONAL EQUIPMENT - Remote assistance with NC control - Top crane (elevator) for supporting large diameter bending - Hydraulic side supports for assisting large diameter bending - Ground and polished rolls - Dual speed adjustment system - Infinitely variable speed control - Rotation driven by hydraulic motor - Extractor system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 4/6 mm Bending: 6/8 mm Top & Lower Roll: 180 mm Side Roll: 150 mm Kdodpoxw Eahsfx Aadow Min. Bending Diameter: 270 / 900 mm Motor Power: 4 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 3850 mm Width: 1350 mm Height: 1290 mm Weight: 3300 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 150 mm, side roll diameter: 130 mm, working width: 2,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by electric motor - Hydraulic up/down movement of rear and lower roll - Precision bending with main motor equipped with brake - Conical bending and pre-bending system - Upper and lower roll driven by planetary gearbox - Rear roll ball support system for easier plate handling - Compliance with EU safety directives - High-strength forged steel rolls made of SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 pcs) Kedpfxoxw D Udj Aadsdw - Operating manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for support during large-diameter bending - Hydraulic side supports for large-diameter bending - Ground and polished rolls - Wire grooves on roll ends - NC control unit - Dual-speed operation - Stepless speed adjustment - Ejector system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Bending: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Condition: new, Year of construction: 2025, control type: NC control, degree of automation: automatic, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 180 mm, side roll diameter: 150 mm, working width: 2,550 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, warranty duration: 12 months, Equipment: documentation/manual, emergency stop, foot remote control, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulic up/down movement for rear and lower rolls Precision bending with braked main motor Cone bending and pre-bending system Lower and upper rolls driven by planetary gearbox Rear roll ball system for easy sheet movement Compliance with EU safety directives High-strength forged steel rolls made from SAE 1050 (CK45) certified steel Hardened shafts Digital indicators (2 units) User manual OPTIONAL EQUIPMENT Top crane (elevator) for support in large diameter bending Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves on journal ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydromotor option TECHNICAL SPECIFICATIONS Kdsdpfx Aoxw D Tmjadew Bending Length: 2550 mm Pre-bending: 3/4 mm Bending: 4/6 mm Upper & Lower Roll: 180 mm Side Roll: 150 mm Min. Bending Diameter: 270 / 900 mm Motor Power: 4 + 1.1 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4350 mm Width: 1100 mm Height: 1290 mm Weight: 3070 kg