Used Crank Press for sale (12,648)

Condition: used, Technical details: pressure: manuell t stroke: 15 mm machine weight approx.: 8,4 kg dimensions of machine: 600x250x70 mm Gsdpfx Adeu Nfr Nekokd Pneumatic Cable Terminal Press - application: press of cable terminal on electrical cable and air-conditioning lines futher details: - press cylinder: slide Ø 25mm: outer diameter Ø 68mm: maximum extension length approx 15mm - tool fork: width=30mm ; length=70mm - maunal lever Ø 30 x L:300mm equipment - toolbox with div. round and hexagonal tool jaws i.D. *

Condition: used, Year of construction: 1960, Technical details: pressure: 10 t throat: 255 mm max. ram stroke: 400 mm ram speed - reverse: 0,180 m/sec. m/sec. ram speed - forward: 0,080 m/sec. m/sec daylight dimension : table/slide up: 630 mm daylight dimension : table/slide low: 230 mm table clamping surface:: 420 x 400 mm passage opening in table: 220 mm surface area of ram: 200 x 200 x 65 mm total power requirement: 1,6 kW weight of the machine ca.: 1,1 t Godpfxou Nfudo Adkjkd dimension machine xH: 1,1 x 0,5 x 2,1 m

Condition: used, Technical details: Pressure: 2,5 t throat: 155 mm max. ram stroke: 280 mm distance table/ram: 450 mm clamping plate on table: 260 x 1000 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm Godpju Nfv Usfx Adkskd height over floor: 930 mm total power requirement: 1,1 kW weight of the machine ca.: 500 kg dimension machine xH: 0,85 x 1,0 x 17 m The machine is equipped for straightening work. *

Condition: used, Technical details: pressure: 0,9 t Gkjdpfx Aju Nfw Ssdked daylight dimension : table/slide up: 350 mm throat: 295 mm ram diameter: 40 mm Table dimensions: 600 x 330 mm height over floor: 935 mm weight of the machine ca.: - t dimension machine xH: 1,2 x 0,8 x 2,1 m Punch holder with M24x60mm internal thread Hydraulic power unit Röhm-Gamet, type 1E1 HS299, pressure 38bar, tank capacity approx. 50 liters One-hand operation *

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring Gksdpfx Aju R Sxxjdkod of the pressure necessary - New exhibition machine -

Year of construction: 1998, condition: good (used), AMADA PROMECAM ITS2 2512 CNC PRESS BRAKE MAKE AMADA PROMECAM, MADE IN FRANCE MODEL ITS2 2512 YEAR 1998 CONTROL OPERATEUR 2 TONNAGE 25 TONS LENGTH 1250.0 mm NO OF AXES 4 AXIS CNC GUARDING SICK OPERATOR LIGHT GUARD TOOLING FULL SET OF CLAMPS PLUS UPSTROKING HYDRAULIC PRESS BRAKE FOOT CONTROL PENDANT Gkodpfopz Igiex Adksd FULL SET OF MANUALS FULL SET OF CLAMPS SET OF TOP AND BOTTOM TOOLING

Condition: used, functionality: fully functional, Year of construction: 1991, Used 2.5-meter press brake Type: UCK 80 2550 Capacity: 2550 x 80 tons Includes various tools Year of manufacture: 1991 Gkjdj Ahgukopfx Adked NC-adjustable back gauge

Condition: excellent (used), Year of construction: 1960, functionality: fully functional, machine/vehicle number: V-65R, cutting force: 100 t, total width: 1,400 mm, total length: 6,000 mm, total height: 2,100 mm, overall weight: 8,300 kg, pressure: 30 bar, Arnold baling press SP-100 Gkedpfx Adsz Az Exjksd In very good condition. Regularly maintained and in continuous operation until today.

Condition: used, functionality: fully functional, Year of construction: 2000, We offer a used Amada ITS2 103 edge bending press, manufactured in 2000. Edge bending press Amada ITS2 103, 3m, 100t. Fully operational. Worldwide delivery is possible. Price: €10,000. Gksdpfxj Ahg Shj Adked Manufacturer: Amada Promecam Model: ITS2 103 Year of manufacture: 2000 Machine type: Edge bending press If you have any questions or require further information, please send a message or contact us by phone.

Condition: used, Year of construction: 1968, power: 14 kW (19.03 HP), input voltage: 380 V, type of input current: three-phase, Prasa półkowa OTT JU 60-S niemieckiej produkcji, przeznaczona do prasowania i klejenia płaskich elementów stolarskich oraz oklejania płyt fornirem. Maszyna sprawdzi się przy produkcji elementów meblowych, frontów, drzwi oraz płyt warstwowych. Podgrzewane płyty umożliwiają prowadzenie procesu klejenia na gorąco, przy zastosowaniu odpowiednio dobranego kleju. Masywna stalowa rama oraz hydrauliczny docisk zapewniają stabilną konstrukcję. Dolna płyta robocza jest podnoszona, a mechanizm zębatkowy synchronizuje jej ruch. DANE TECHNICZNE: – producent: Paul Ott KG, – model: JU 60-S, – kraj produkcji: Niemcy, – rok produkcji: 1968, – numer fabryczny: 4792, – typ: prasa hydrauliczna półkowa z ogrzewaniem elektrycznym, – liczba półek roboczych: 1, – liczba płyt prasujących: 2, – napięcie silnika według tabliczki: 380 V, Godpfxj Ahg Hks Adkokd – prędkość obrotowa silnika według tabliczki: 1400 obr./min, – napięcie zasilania ogrzewania: 380 V, – moc ogrzewania: 14 kW. WYPOSAŻENIE I KONSTRUKCJA: – hydrauliczny układ docisku, – podgrzewane płyty prasujące, – ruchoma dolna płyta, – mechanizm synchronizacji ruchu stołu z listwami zębatymi, – panel sterowania umieszczony z przodu maszyny, – analogowe wskaźniki i pokrętła regulacyjne, – wyłącznik główny, – masywna stalowa konstrukcja ramowa, – otwarty dostęp do przestrzeni roboczej. ZASTOSOWANIE: – fornirowanie płyt meblowych, – klejenie płaskich elementów stolarskich, – prasowanie elementów warstwowych, – produkcja frontów, drzwi i elementów meblowych. Wystawiamy fakturę VAT. Możliwość organizacji transportu za dodatkową opłatą. Zapraszam do przetestowania maszyny. Gdzie obejrzysz nasze maszyny? JBS MASZYNY STOLARSKIE WOLICA DRUGA 26 23-310 MODLIBORZYCE

Condition: excellent (used), Year of construction: 2023, Pressing Lines for automatic multi-(2-3)-layer parquet production. Gedpfx Aoggflcsdkskd

Condition: ready for operation (used), Year of construction: 1990, Langzauner LZT 90 Pressing area: 2500 x 1300 mm Opening width: 400 mm Number of press cylinders: 6 Total pressing force: 90 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.0 kW Space requirement (L x W x H): approx. 3000 x 1500 x 1950 mm Weight: approx. 3800 kg Hydraulic heating plate press with bottom cylinder design Gkodpfx Ae Ahyvvsdkjd Pressing pressure can be continuously adjusted by means of a pressure control unit Two-stage hydraulic pump with automatic changeover valve from low to high pressure Central control panel at the front Rack-and-pinion compensation for uniform closing Safety pull cord Opening automation Stroke limitation

Condition: good (used), Year of construction: 2006, Used insertion press HAEGER 824 plus-1H with feed hopper Technical data: Manufacturer: HAEGER Model: 824 plus-1H Year of manufacture: 06/2006 Condition: good, used Press force, min: 2.0 kN Press force, max: 72.0 kN Insertion capacity up to 1800 pieces Adjustable range of ram: 0-220 mm Overhang: 610 mm Connections: 3 phases, 50 Hz, 380 V, 16 A Electronic control / CE: 24 V Motor power: 3.6 kW Oil capacity: 83 l Dimensions (W x D x H): 1100x1650x2400 mm Weight: 1450 kg Fully hydraulic insertion press for manual and/or automatic processing of insertion fasteners from all manufacturers. Fastener range: M2-M10. Standard equipped with a patented safety control system. Due to the integrated fixed stop, the precise pressure build-up, and the low assembly value, the machine is ideally suited for use as an "assembly/riveting press". including accessories: Modular, patented fastener feeding system from Haeger-MAS-9 Advantages: - Fasteners in the size range M2-M8 can be fed - Processing capacity up to 1500 pieces per hour - Very easy tool change without adjustment effort (plug-in tool modules) - Tool change time, e.g. from nuts to bolts or bushings, approx. 2 minutes - Large feed hopper made of wear-resistant, stainless steel Gkedo Ahwkrspfx Adksd The picture shows the same model, but not the machine itself that is for sale.

Condition: excellent (used), Year of construction: 2002, We are offering this very well-maintained Heidelberg Quickmaster DI 46-4 offset printing press, manufactured in 2002, for sale. In addition, printing inks, printing plate rollers, and additives can be purchased. Sale due to company closure. The machine is still in production and can be inspected at any time. A video can be provided upon request. Manufacturer: Heidelberg Model: Quickmaster DI 46-4 Year of manufacture: 2002 If you have any questions or require further information, please send us a message or call us. Gksdpfxoz H Unde Adkod

Condition: new, Year of construction: 2025, Capacity: 25 and 40 kg/h Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Container size: 0.38 m³ Power consumption: 4 kW Gksdpfxspfatpe Adked Machine length: 1860 mm Machine width: 890 mm Machine height: 1100 mm Weight: 400 kg

Condition: new, Year of construction: 2024, Pressing area: 3000 mm x 1800 mm Design: Freestanding Working area: 1460 mm x 2900 mm Gkjdjxzfw Uepfx Adkod Number of manual hydraulic cylinders: 4 Pressing pressure per cylinder: 2000 kg Cylinder stroke: 70 mm Pressure clamps: 1 Machine length: 2900 mm Machine width: 900 mm Machine height: 2000 mm

Condition: as good as new (ex-display), Year of construction: 2025, Pressing area: 3000 mm x 1500 mm Gedpfx Adju Egp Iokskd Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Noise level: 70 Db Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1750 mm Weight: 950 kg

Condition: new, Year of construction: 2025, Performance: 40 and 60 kg/h Automatic start: yes Oil cooler: Yes Briquette size: 50 mm diameter Briquette length: 35 mm Container volume: 0.38 m³ Power consumption: 5.5 kW Machine length: 1860 mm Machine width: 890 mm Machine height: 1100 mm Gsdewhuulepfx Adkokd Weight: 400 kg

Condition: excellent (used), Year of construction: 2003, Mini-dovetail press from the manufacturer LÖWER for compressing mitered mini-dovetail and softline joints. The right table half is pressed against the left using the press cylinder. Available with 4 clamping cylinders and two press cylinders. Working area: 1000 x 400 mm Working height: 800 mm Godpfs Ah Dyyjx Adkokd Cylinder stroke length: 25 mm

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, pressing force: 70 t, stroke length: 400 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, cylinder diameter: 70 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press drive: Hydraulic Total pressure: 70 t Working pressure: 2 kg/cm² Total stroke: 400 mm Number of working stations: 1 Number of levels: 1 Plate material: Mounted plate Number of cylinders: 6 Cylinder diameter: 70 mm Workpiece length: max. 3,000 mm Workpiece width: max. 1,300 mm Workpiece height: max. 400 mm Heating type: Oil-heated Temperature: max. 120 °C MACHINE DETAILS Main motor power: 2.1 kW Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,100 x 2,050 mm Unladen weight: 4,020 kg Number of transport packages: 1 EQUIPMENT Documentation Heating boiler CE marking Gedpfx Ade Af Hn Hjkokd CE certificate

Condition: used, Briquetting Press RUF RB 440 Hydraulic briquetting press made in Germany (RUF GmbH & Co KG). It presses sawdust and other wood residues into rectangular briquettes without binders. The machine is dismantled and in working condition. Gedpfx Ao Afxccjdkokd Technical data: Manufacturer: RUF GmbH & Co KG (Germany) Type: RB 440 Year: 1991 Capacity: 450 kg/h Compression pressure: max. 1700 kg/cm² Sawdust moisture: max. 14% Motor power: 30 kW Briquette size: 150 × 60 mm Voltage: 400 V, 50 Hz Dimensions (L × W × H): 1800 × 1800 × 1900 mm Transport height: 2200 mm Weight: 3000 kg

Condition: used, Briquetting Press UMP BP 420A Hydraulic briquetting press made in Lithuania (UMP). It presses sawdust and other wood residues into briquettes. The machine is dismantled and in working condition. Technical data: Manufacturer: UMP (Lithuania) Type: BP 420A Gkjdo Afxkmspfx Adkod Year: 2004 Motor power: 35 kW Hydraulic pressure: 300 bar Voltage: 380 V, 50 Hz Current: 100 A Weight: 3000 kg

Condition: good (used), functionality: fully functional, Robust hydraulic press, type HES 16MP, manufactured by Hydraulische Pressen und Maschinenbau GmbH (HYPREMA). Gkjdpoumk Najfx Adksd Depending on the tooling and permissible load, the machine is suitable for typical pressing and straightening operations, such as aligning, pressing in, and pressing out components. The model designation HES 16MP indicates a nominal pressing force of approximately 16 tons. The installed pressure gauge has a display range up to 25 MPa (25 tons). Model: 7092513 Type: HES16MP General: - Pressure gauge display, pressing force: 0–25 MPa (0–25 tons) - Pressure gauge display, hydraulic pressure: 0–400 kp/cm² (approx. 0–392 bar) - Design: Hydraulic single-column press - Operation: Hand lever actuation

Condition: excellent (used), functionality: fully functional, pressing force: 3 t, Force 32 kN, stroke 100 mm Gkedpfx Ade Aiv Rcskod

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, control type: CNC control, actuation type: electric, controller manufacturer: Lenze, bending force (max.): 80 t, working width: 2,550 mm, throat depth: 1,000 mm, distance between stands: 2,700 mm, operating speed: 75 mm/s, number of axes: 6, table height: 1,000 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 6,900 kg, total length: 3,950 mm, total width: 1,820 mm, total height: 2,650 mm, input voltage: 400 V, input frequency: 50 Hz, number of support arms: 2, warranty duration: 6 months, pressing force: 80 t, Equipment: CE marking, documentation/manual, foot remote control, safety light barrier, SafanDarley press brakes are innovative and highly efficient sheet metal processing machines from the Dutch manufacturer. Their bending precision and reliability have been highly appreciated by users in Poland and worldwide. The SAFANDARLEY E-Brake press brake features an electric drive. Lenze servomotors, controlled by frequency inverters from the same company, ensure fast and reliable operation of the system for many working hours. Additionally, the machine consumes electrical energy only during the downward stroke of the ram. The ram returns to its initial position using the force generated by springs. Even during idle time, the machine consumes virtually no electrical energy, as there is no pump in the system, unlike hydraulic presses. We estimate that the electrical energy consumption is 70% lower than in conventional hydraulic presses. SAFANDARLEY servo-electric press brake, model E-Brake Pressing force: 800 kN (80 tons) Ram stroke: 300 mm Opening: Q=590 mm Upper beam travel speed: 90 mm/s Upper beam accuracy: +/- 0.01 mm Max. speed of backgauge fingers: 350 mm/s Max. backgauge finger reach (third point of reference, reach in the X-axis): 1000 mm Backgauge range in the R-axis: 150 mm Connected power: 11 kW Weight: 6900 kg Machine width: 3,950 mm Machine depth: 1,820 mm Machine height: 2,510 mm Power supply: 3/N/PE 50Hz – 400/230V Servo-electric drive (without a hydraulic system) Power transmission via belts CNC-controlled axes: Upper beam: CNC axes: Y1-Y2 Backgauge: 5 CNC axes: X-R-Z1-Z2-deltaX Upper clamping beam: Hydraulic WILA Lower clamping beam: Hydraulic WILA Gkedpfjr Ndxqox Adksd Machine inspection and testing are possible.