Used Crank Shear for sale (2,100)

Condition: good (used), functionality: fully functional, Size: 25 / 3.25 Cutting length: 2540 mm Sheet thickness at 400 N/mm²: 3.25 mm Cutting angle, approx.: 1.3° Strokes per minute: 50 H/min Prodpfx Aoz Iznmsiroc Drive power: 7.5 kW

Year of construction: 1971, condition: ready for operation (used), Large working width: 2000 mm for sheets up to: 3 mm clear distance between columns: 2050 mm Podpfehy Tqaox Airjrc throat depth: 250 mm Support table size: 220 x 2200 mm electr. Drive: 380 V, approx. 5 kW Weight: 2.7 tons

Year of construction: 1965, condition: used, machine/vehicle number: 4447, working width: 2500 mm metal sheet thickness: 4 mm throat: 70 mm Prjdpfsb H Ibuox Airoc rear stop: 520 mm power: 380 V, 6,3 kW space needed: 3200 x 2300 x 1270 mm weight: 4600 kg

Condition: used, A mechanical crank-operated guillotine shear with a cutting length of 2040mm is offered. Max. sheet thickness: 3mm. Max. sheet material strength: 400N/mm². Equipped with: Foot pedal operation, backgauge with handwheel adjustment, front support arms. Weight: approx. 2300kg. The cutting blades have been incorrectly ground. Reworking is required. Viewing possible by appointment. Preds Agn Nzspfx Airsc

Condition: used, functionality: fully functional, Year of construction: 1976, control type: manual, degree of automation: manual, actuation type: electric, working width: 600 mm, sheet thickness (max.): 3 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness copper (max.): 3 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 3 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 5 bar, pressure (min.): 4 bar, pressure (max.): 5.5 bar, overall weight: 4,500 kg, total length: 3,000 mm, total width: 2,200 mm, total height: 1,800 mm, Equipment: centralized greasing system, MINO GIOVANI BATTISTA Circular Shears for Cutting Steel Sheets 600 mm x 3 mm – used Coil Slitting Line – MINO GIOVANI BATTISTA + Strip Straightener MINO GIOVANI BATTISTA Max. sheet thickness: 3 mm Max. cutting width: 600 mm Knife sets (more than 50 pieces) Prjdpfx Aoyn Shzjirec Inner coil diameter: 400–550 mm Outer diameter: up to 1,500 mm Max. coil weight: up to 5 tons Decoiler and recoiler with spacers Technical Data Drive type: electric Working width: 600 mm Max. sheet thickness: 3 mm Max. steel thickness: 3 mm Power: 22 kW (29.91 HP) Connection voltage: 380 V Frequency: 50 Hz Total weight: 4,500 kg Total length: 3,000 mm Total width: 2,000 mm Total height: 1,800 mm Equipment • Centralized lubrication system • Pneumatic coil removal from decoiler • The machine is powered and currently installed in production Included Free of Charge Along with the circular shears, we provide a sheet metal cold rolling machine free of charge for achieving tight thickness tolerances. MINO GIOVANI BATTISTA – Rolling Machine Model: LAS Power: 6 kW Weight: 4,500 kg Cold rolling machine (for tight tolerances) Max. material width: 130 mm Max. material thickness: 3 mm Decoiler, belt-driven power transmission Prices Circular shears: EUR 11,000 Rolling machine: EUR 3,500 The rolling machine is included in the package at no extra charge, as it was used together with the line. Disassembly and loading costs: EUR 1,800 Delivery Terms Parity: EXW 10290 Zaprešić – Croatia Loading space length: 6 m Width: 2.2 m Total weight approx.: 9 tons Prices are net of VAT – reverse charge Delivery Time The machine is available 10–15 days after payment. The fixed loading date must be announced at least 7 days in advance for organizing forklift and crane.

Condition: used, Year of construction: 1982, machine/vehicle number: 10628, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: hydraulic squaring shear Machine weight: approx. 5 t Working area Sheet metal width: 3,000 mm Sheet metal thickness: 4 mm Frame width: 3,300 mm Back gauge: 700 mm Cutting data Stroke rate: 19–50 strokes/min Motor power: 7.5 kW Total power requirement: approx. 10 kW Predpfx Aij Aa A A Asrjc Dimensions Space requirement: approx. 3.7 × 1.5 × 1.9 m EQUIPMENT 2 stop blocks Digital display Illuminated cutting gap Additional bar with a length of 2.6 m

Condition: used, Year of construction: 1971, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Sheet metal width: 2,000 mm Sheet metal thickness for St 42: 16 mm Passage width: 2,250 mm Overhang: 600 mm Knife and cutting Knife length: 2,005 mm Cutting gap adjustment: 0.05–0.95 mm Cutting angle: 1° 40′ Clamping beam: 10 pcs. Back gauge Gauge length: 1,000 mm Back gauge adjustment: 10–1,000 mm Predsz S Ng Hspfx Airoc Work table Table size: 2,500 × 700 mm Table height above floor: 800 mm Hydraulics and Electrics Oil volume: 900 l Operating voltage: 380 V Machine data Machine weight: approx. 10 t Space requirement: approx. 3 × 2.3 × 2.3 m EQUIPMENT Foot switch Supports Spare knife

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, Colly hydraulic plate shear, type GTS 2 4006 working width 4050 mm Prsdpfxe Af Ivxj Airoc maximum sheet thickness 6 mm motorized back gauge Elgo digital adjustment for the back gauge

Condition: ready for operation (used), functionality: fully functional, controller model: Rexroth CNC-Steuerung, working width: 1,330 mm, sheet thickness (max.): 3 mm, straightening roller diameter: 100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Sheet thickness: 0.7–3.2 mm Working width: max. 1,330 mm Number of straightening rollers: 5 Straightening roller diameter: 100 mm Number of feed rollers: 2 Feed roller diameter: 100 mm Coil inner diameter: 530–610 mm MACHINE DETAILS Control system: Rexroth CNC control (for length and quantity) Drive type: Hydraulic Dimensions & Weight Machine weight: 9,500 kg Installation length: 6,500 mm Installation width: 3,300 mm Prjdpfxe Af Hdzs Airec EQUIPMENT Uncoiler: Metform, 5 t Coil loading cradle Shear: Morgan PG1500-3.2

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, pressing force: 400 t, stroke length: 450 mm, table width: 2,050 mm, table length: 1,500 mm, Weingarten OK 400.21.45 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Weingarten OK 400.21.45press Pjdpfxjv E Rm Hj Airorc A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: ready for operation (used), Year of construction: 2002, Available immediately ex-yard: Hydraulic plate shear Baykal Type HGL 3100 x 6 Year of manufacture 2002 Cutting length 3060 mm Steel 6 mm Stainless steel 4 mm Distance between uprights 3100 mm Hydraulic hold-down clamps 16 pieces Strokes/min 15 Controlled back gauge 6 - 1000 mm Cutting angle 1.6 degrees Drive power 19.5 kW Weight 6300 kg Pedo Afcmljpfx Airsrc Price: EUR 8,500.00 plus VAT, ex-yard.

Condition: ready for operation (used), Year of construction: 1978, Immediately available, free of any bankruptcy claims: Universal profiling steel shear with hole punch, Mubea Type KBL 11 N Year of manufacture 1978 Pressing force 35 tons Reach 320 mm Punching round holes up to 33 mm in diameter Prodpfxo Aa Iqlj Airjc Cutting square sections up to 30 x 30 mm Cutting flat steel 100 x 10 mm Cutting angle iron 130 x 13 mm Cutting T-profiles 60 x 8 mm Various hole punches Weight 2 tons Price: EUR 1,750.00 plus VAT, ex works.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, total length: 3,000 mm, Equipment: CE marking, documentation/manual, foot remote control, • Effective cutting length: 3,050 mm (max 3,100 mm) • Maximum cutting capacity (Fe / Rm = 420 N/mm²): 6 mm - 8 mm • Throat depth (Gooseneck / Throat): 500 mm Prode Afy Ugepfx Airec • Distance between uprights: 3,200 mm • Back gauge stroke: 1,000 mm (motorized) • Installed power (Motor): 11 kW • Voltage / Frequency: 380 V / 50 Hz • Minimum pneumatic pressure: 6 bar • Approximate machine weight: 9,000 kg

Condition: ready for operation (used), Year of construction: 1989, Available immediately ex works: Hydraulic plate shear Atlantik Type ATS 3012 Year of manufacture 1989 Cutting length 3050 mm Material thickness up to 12 mm Cutting angle adjustment 0.5 – 3 degrees Hydraulic hold-down clamps, 18 pieces Electric back gauge, 1000 mm Drive power 25 kW Weight 9 tons Prodpfxe Aa Ipbj Airsc Price: Euro 7,000.—plus VAT ex works.

Condition: used, functionality: fully functional, Year of construction: 2001, machine/vehicle number: 10730, control type: manual, degree of automation: manual, actuation type: electric, overall weight: 2,400 kg, total length: 2,310 mm, total width: 1,200 mm, total height: 2,050 mm, Equipment: CE marking, emergency stop, foot remote control, The machine is used but in working condition. On-site testing is possible. I can send more photos and a video. Sold without warranty or guarantee. Prsdpfx Asz Iwh Aoiroc

Condition: good (used), Year of construction: 1983, Sheet metal width: 6200 mm Sheet metal thickness: 8 mm Pjdpe Afwt Ssfx Airerc Overhang: 60 mm Stand spacing: 6400 mm Cutting angle adjustment: 0.5 to 2° Total power requirement: 13 kW Machine weight (approx.): 19 t

Condition: used, functionality: fully functional, Year of construction: 1984, sheet thickness (max.): 6 mm, total length: 3,510 mm, total width: 1,850 mm, total height: 2,030 mm, cutting length (max.): 3,050 mm, We are offering this used Toolmaster TS 306 metal shear, manufactured in 1984, for sale. Type: TS 306 Psdpfsz Sdycsx Airsrc Year of manufacture: 1984 Voltage: 380 V Capacity: 6 mm x 3050 mm Serial number: 65 530 If you have any questions or require further information, please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 1977, Immediately available from site: Universal profile steel shear with punching unit Peddinghaus Model 210 / 16 Year of manufacture: 1977 Pressing force: 60 t Pedpo Aa Iqxefx Airorc Punching: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90 degrees: 130 x 13 mm L profile 45 degrees: 100 x 11 mm T profile 90 degrees: 130 x 15 mm T profile 45 degrees: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Price: €1,500 plus VAT, ex site

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 100 h, Equipment: type plate available, Amada GS II 630 EVO sheet metal shear model year 2018, Working width 3050mm, max sheet thickness steel 40-45kg/mm2/6.35mm Max. sheet thickness stainless steel 60kg/mm2/4mm, aluminum max. sheet thickness 30kg/mm2/8mm. Accessories Side guide front stop beam 1m, Front stop beam 1m 2pcs, Standard lever stop 2pcs, Ball support 1.5m 3pcs. Cutting quantity 15,000 times. Pump operating hours 100h. Very little used Prodoziviwspfx Airoc

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: Cybtouch 8, working width: 4,060 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, overall weight: 9,500 kg, number of support arms: 4, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, Used Very Clean / Modern Morgan Rushworth 4metre x 6mm hydraulic industrial sheet metal guillotine machine for sale The Morgan Rushworth HSGS 4100/6 (also designated as the 4100.6) is a heavy-duty NC Hydraulic Swing Beam Guillotine designed for industrial sheet metal cutting. The nomenclature indicates its primary capabilities: a maximum cutting length of 4100mm and a maximum cutting thickness of 6mm in mild steel. Technical Specifications • Cutting Length: 4100 mm / 4metre • Max Material Thickness: 6 mm (Mild Steel) • Stroke Capacity: 12 strokes per minute • Hold Downs: 23 hydraulic hold-downs to secure the sheet metal during shearing • Main Motor Power: 11 kW Key Features & Operation • Swing Beam Design: The upper blade travels in an arc, providing efficient cutting action and preventing the material from jamming against the lower blade. • NC Control Panel: Equipped with specialized controllers like the SI Touch 8 or Cybelec CybTouch series. This system automates the X-axis backgauge distance, tracks material thickness settings, and stores user-programmed multi-stroke cycles. • Blade Gap Adjustment: Rapid blade gap calibration can be adjusted via a manual lever or programmed dynamically through the touchscreen interface to align with the material's thickness. Psdpfx Aie Agu R Dororc • Material Support: Standard operational features include shadow line lighting for quick visual alignment, a powered backgauge with precise digital entry, and *optional pneumatic rear sheet supports to prevent thin materials from sagging. * to be confirmed • Integrated Safety: Features structural fixed front guards with viewable high-visibility windows, multi-point emergency stops, rear safety fencing, and an optional advanced infrared or finger light guard detection system.

Condition: used, Year of construction: 2009, operating hours: 15,600 h, functionality: fully functional, cutting force: 800 t, total width: 6,400 mm, total length: 18,500 mm, total height: 4,600 mm, overall weight: 1,53,000 kg, year of last overhaul: 2024, Hydraulic scrap shear Taurus In very good condition. Pedpfx Aozudwaeirerc

Condition: good (used), Year of construction: 2015, machine/vehicle number: 3131151803, Offer 26255 Technical specifications: - max. working width 1350 mm - max. cutting capacity St 40 3 mm - cutting angle 2.30° - motorized back gauge 20 - 750 mm - sheet metal lifting, pneumatically assisted - rear guard with light curtain - front angle stop + support arms - stroke rate depending on cutting length up to 42 strokes/min - pneumatic connection 6 bar - drive 400 V / 7.5 kW - table height approx. 850 mm Prsdps Af Igxefx Airjc - electric foot pedal - space requirement including back gauge and rear guard, without front support arms - approx. W 1950 x H 1250 x D 1950 mm - weight approx. 1800 kg

Condition: ready for operation (used), Year of construction: 1990, Available immediately ex-yard: Hydraulic plate shear Durmazlar Type AGH 3 M 20 Year of manufacture 1990 Cutting length 3020 mm Material thickness up to 8 mm Hydraulic hold-down clamps, 16 pieces Drive power 20 HP Electrically controlled back gauge, 1000 mm Weight 8 tons Psdpfxe Aa In Do Airsrc Price: EUR 5,000.00 plus VAT, ex-yard.

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, A mobile scrap shear in new condition is for sale. Pedpfx Aiozlqgvororc Inspections can be arranged at any time.

Condition: good (used), functionality: fully functional, FS Frank Schäffler Used Machines You are bidding on a branded sheet metal shear from the well-known German manufacturer Schechtl. Pjdpjz Ig Aiofx Airerc Features of the machine: Cuts materials up to 2 mm thick, such as iron and aluminum (see nameplate) Usable length: slightly over 1.5 m Rear stop: 500 mm Side/angle stop Manual and foot operation See pictures; the machine has not been overhauled and comes from a school workshop. Good condition. You will receive an invoice according to §25a UStG; the value-added tax is included in the invoice amount. Optionally, a matching bending brake, as well as a manual shear, are available. I can arrange transport with a shipping company if desired. Free loading as shown in the pictures. Inspection and testing are possible after scheduling an appointment by phone. Payment in cash upon collection or by bank transfer. If I can do anything else for you, please call me briefly. Thank you. Collection should take place within 8 days after the end of the auction. Location: 97261 Güntersleben Article number 260908 Schechtl 1.5 m