Used Cross Conveyor for sale (16,239)

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: Cjdpfx Adsu Tg I Dsdjhf The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: ready for operation (used), Year of construction: 1996, For sale: conveyor belt as shown in the photo. Length: 4.4 m, belt width: 0.5 m. I have several identical units available. Possibility of transport. Csdpfoukr H Uox Addshf

Condition: used, Vibro conveyor for wood waste - Total length 15 m, - Divided into two parts 7 and 8 m. - Width 400 mm. Csdpfx Adev D Uh Sodjhf

Condition: excellent (used), REF: MM6212 1 X Large stainless-steel framed swan-neck elevator conveyor with flighted belt. Codpfxoxd U Ino Addjhf Technical specification ⚙️ ✅ Belt width - 365mm. ✅ Infeed height - 550mm. ✅ Outfeed height - 2500mm. ✅ Overall dimensions - 4.3m long x 740mm wide x 2.6m high.

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Chsdpfx Adewfq T Sodof Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container.

Year of construction: 1995, condition: used, Water-based painting system complete with 865 linear meter chain with tracks, Sames reciprocators with rotating cups, generators, painting pumps, chart tables and accessories Cedpoit Rrvefx Addehf

Condition: ready for operation (used), Year of construction: 1996, The subject of my auction is a conveyor belt with a length of 15.5 m and a belt width of 0.65 m. Possibility of transport. Cjdpsukr I Sefx Addehf

Condition: new, Year of construction: 2023, Board separator conveyor IDC000105 Chodpfx Asu E S E Ueddof - with roller system - side covers - new electric motors - for HewSaw

Condition: excellent (used), REF: MM6214 1 X Outfeed stainless-steel framed elevator conveyor. Cjdpfjxd Uplex Addjhf Technical specification ⚙️ ✅ Belt width - 330mm. ✅ Infeed height - 150mm. ✅ Outfeed height - 1050mm. ✅ Overall dimensions - 2000mm long x 600mm wide x 1140mm high. Note 🗒️ Previously used as outfeed from VFFS bagger.

Condition: good (used), Extendable scissor roller conveyor 500x50cm Cjdpfx Adjwundmedehf Very universal, adjustable length (scissor construction), possibility of creating a curve. Adjustable height, each wheel has a brake. Dimensions: max. length 5m roller width: 50cm Weight 90kg

Condition: ready for operation (used), Year of construction: 1996, The object of my auction is a 29m long belt conveyor belt width 0.8m Possibility of transport. Möglichkeit des Transports. Cjdpfx Ajui N Hpsddehf

Condition: used, Year of construction: 2009, Roller conveyor - length: 3 m Chsdpfx Aotrwc Soddof - roller width: 160 mm - electric motor: 0,55 kW

Condition: excellent (used), REF: MM6164 1 x Inclined conveyor with height adjustable feet, single-speed. Previously used as an outfeed conveyor for a VFFS bagging machine.  Technical specification ⚙️ ✅ Belt diameter - 2950mm long x 250mm wide. Chjdpjw H I Agsfx Addsf ✅ Infeed height - 350mm.  ✅ Outfeed height - 850mm.  ✅ Overall dimensions - 2950mm long x 450mm wide x 850mm high. ✅ Electric supply - 240 V / 50 hz / 1 phase.

Condition: good (used), Conveyor belt for scraps from guillotine M-Fordersysteme Production Germany Year of manufacture 2015. Working width 46 cm, conveyor length approx. 250 cm. Chedjwxtdgopfx Addef Discharge of trimmings from under the machine directly to the container. Material pressing roller, upper cover preventing spillage of the excavated material.

Condition: ready for operation (used), Year of construction: 1996, The subject of my auction is a conveyor belt with a length of 3.8m and a belt width of 0.65m. The conveyor has speed adjustment via an inverter. Possibility of transport. Csdpfx Adswhflnodjhf

Condition: used, Chain conveyor IDC000113 - total length: 30 m - width: 1 m - height: 850 mm - electric motor: 11 kW Chodpfx Asvlc Ngeddef

Condition: ready for operation (used), Year of construction: 1996, The subject of my auction is a 12.5m long conveyor belt, 0.5m wide Csdjq Ru Hmspfx Addshf Possibility of transport. Possibility of transport.

Condition: used, Roller conveyor IDL000841 - Length: 5,2 m - roller width: 700 mm - Electric motor: 0,25 kW - air suspension Codjvv Eckjpfx Addshf

Condition: ready for operation (used), Year of construction: 1996, The subject of my auction is a conveyor belt with a length of 4.4m and a belt width of 0.5m Cjdpfx Ajw Alxdoddshf

Condition: used, Length: 7 m, external width 1030 mm, height 530 mm, 4 chain paths. Chedpev Eagvefx Addjf

Condition: ready for operation (used), Year of construction: 1996, The subject of my auction are belt conveyors lengths from 7m to 11m tape width 0.3m On other auctions many other feeders I invite you Chedpfsum Smmjx Addef Possibility of transport. Möglichkeit des Transports.

Condition: used, Chain conveyor IDC000114 - length: 17 m - width: 1000 mm, Cjdpfxevldl Aj Addshf - electric motor: 11 kW - height: 850 mm - used for wood chips and saw dust

Condition: ready for operation (used), The object of my auction is a belt conveyor of length 21m belt width 1 m. Cedpfxjr D N Hkj Addshf Possibility of transport. Möglichkeit des Transports.

Condition: used, Belt Conveyor 000778 Csdpfxetrxd Ss Addjhf - Total Length: 7, 4 m - Work length: 6 m - Total Width: 1, 1 m - Belt width: 290 mm - electric motor: 3 kW

Condition: new, Year of construction: 2024, Board Separation conveyor IDC000104 - New belt - New electric motors - Made in 2024 - After HewSaw Codpeu E R Hwefx Addshf