Used Ctp Plate Developer for sale (14,461)

Year of construction: 2008, condition: excellent (used), Plate heat exchanger APV H17 7.41 4.8nm2 800kw APV H17 MGJ plate heat exchanger /ct2227/ Manufacturer: APV Type: H17 MGJ 10.1 Year of manufacture: 2008 Heat transfer surface: 4.08nm3 Nominal power: 800kw Width: 340mm Height: 1050mm Connection height: 137mm Depth: 60cm Lhedpfx Ajwx Hz Seabon Pipe connection DN50,EN 1092 Capacity: Primary: 7.41Liter Secondary: 6.86 Max pressure: 10bar Test pressure 15.53 bar Max temperature: 110 °C Stainless steel pipe connections.

Condition: good (used), functionality: fully functional, Year of construction: 1991, sheet thickness steel (max.): 16 mm, cutting length (max.): 6,000 mm, HYDRAULIC SHEAR LVD MVSB 62/16 Serial number 18478 Yom 06/1991 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 6200mm Distance between uprights 6400mm Gap 60mm Range back gauge 1000mm Min. cutting angle 0.5 ° Lhodpfeumhm Aox Aaben Max. cutting angle 2.5° Min. number of strokes/min. 6 Max. number of strokes/min 25 Min. blade clearance 0.05 mm Max. blade clearance 1.6mm Motor power 30kW Approx weight 35000 Kg LxWxH 7100x2400x3000mm Accessories included; ELGO P85 “GO-TO” for back gauge Electrical adjustment of back gauge 1000mm 1 x Front support 2mtr, one with 90° square arm front support L2000mm Foot pedal Ball bearings on table Inclinable back gauge with manual hydraulic pump

Year of construction: 2018, condition: used, Serial number: 1302xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19196 Description: Lhjdpfsvgzv Iex Aabsn Ammann 538 kg vibrating plate for sale. It has stood for less than a year since it was new and not used at all. Everything must work as it should Ready for delivery.

Condition: good (used), Year of construction: 2008, Machine no.: B0623A0001, cutting length 6,050 mm, cutting thickness 4 mm, back gauge 1,000 mm, net weight 20,900 kg, 15 kW, control system, manufacturer Elgo Electric, model P8721, 7 supports Lhedpfxsxl Du Ts Aabsn

Year of construction: 2022, condition: ready for operation (used), General Data Measurements width 1800 mm Measurements depth 5400 mm Measurements height 1950 mm Machine weight 8500 kg Main Drive Spindle motor power 11 kw Additional Equipment Teach-In NC control for automated bending processes (optional) Mechanical auxiliary arm for handling heavy workpieces (optional) Hydraulic side supports for stabilizing long sheets (optional) Infinitely adjustable bending speed (optional) General Data Measurements width 1800 mm Measurements depth 5400 mm Measurements height 1950 mm Machine weight 8500 kg Lodpsxd Ib Isfx Aabohn Main Drive Spindle motor power 11 kw Additional Equipment Teach-In NC control for automated bending processes (optional) Mechanical auxiliary arm for handling heavy workpieces (optional) Hydraulic side supports for stabilizing long sheets (optional) Infinitely adjustable bending speed (optional) This Metallkraft RBM 4 HMS Pro 3050-150 plate rolling machine was manufactured in 2022. It features a robust welded construction, induction-hardened rollers, and a hydraulic drive for the upper roller. The machine includes three digital displays for precise roller adjustments and a hydraulic folding plate for easy workpiece removal. Ideal for heavy industrial use with options for conical bending. Contact us for more information about this machine. Application Types Rolling

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Lhedpfx Aaoxp Nvdjben Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: good (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schröder and a folding machine from the top manufacturer RAS from Sindelfingen. Machine features: - Cuts (see nameplate) up to 2.5 mm steel - Working length: just over 2 meters - Back gauge: 500 mm - Side/angle gauge - Extendable front support - Foot pedal - Reversible blade - Weight approx. 1300 kg This machine comes from the insolvency of an aluminum parts manufacturer who primarily supplied the automotive industry — has been tested, cleaned, can be inspected and tested — warranty excluded. RAS Folding Bench: - Capacity: 2.5 mm steel, more for aluminum - Bending length: just over 2 m - Adjustable depth stop from the front, can also be used as an excellent sheet support - Hand and foot control - Machine comes from a reputable company and has been professionally checked before sale - Weight: see photo - Optional: a segmented rail (segment bar) from RAS is also in stock - Invoice with VAT shown separately - Shipping can be arranged upon request Free loading as shown in the pictures Inspection and testing are possible by telephone appointment — 0175 248 1975. Payment in cash upon collection — if there’s anything else I can do for you, please give me a call. Thank you. Lhjdpfxoxqpiye Aaben Collection should take place within 8 days after the end of the auction. Location: 97261 Güntersleben

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, sheet thickness steel (max.): 16 mm, cutting length (max.): 4,000 mm, HYDRAULIC SHEAR LVD MVSB 40/16 Serial number 24159 Yom 1997 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 4050 mm Distance between uprights 4250 mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.0 ° Min. number of strokes/min. 7 Ledpfx Ajuipu Eoabehn Max. number of strokes/min 26 Min. blade clearance 0.5 mm Max. blade clearance 1.6 mm Motor power 22 kW Approx weight 20500 Kg LxWxH 4800x2170x2750mm Accessories included; Electrical adjustment of back gauge 1000mm with Go-to controller blade clearance and cutting angle adjustable. 1 x Front support 1500mm, one with 90° square arm front support 1 x Front support of 1500mm Foot pedal

Condition: used, Please contact ATS Norway for more information Lhedowrl T Topfx Aaben Please provide reference number upon request: 20721 Specifications: S70 mount, but a little wider For excavator Works as it should Weight: 645 kg 172 Bar Ready for delivery

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table Lhedpfxewclcio Aabjn -Clamping plate: with support ribs, on a solid base frame -Clamping surface: 800 x 800 mm -Table height: 930 mm -Plate thickness: 25 mm -Transport dimensions: 800/800/H930 mm -Weight: 235 kg

Condition: good (used), Year of construction: 2009, sheet width 3050 mm plate thickness 6.0 mm cutting angle adjustment 0.5 - 3.0 ° down holder 18 Stück no. of strokes 8 - 14 Hub/min back stop - adjustable 750 mm Ljdpfoxmakgox Aabohn work height max. 770 mm Control SP 8 total power requirement 7.5 kW weight of the machine ca. 4800 kg. range L-W-H 3650 x 2100 x 1750 mm very little use (!!) from a maintenance workshop Features - Guide-railed electro-hydraulic guillotine shear - HACO control model NC SP 8 * Easy operation directly at the cutting table * Adjustment of cutting angle + backgauge * Retraction function from rear stop * Electric cutting length limitation * Emergency stop button, locking - Motor-adjustable and programmable rear stop - Electric/hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front - 1x side stop - 1,000 mm, with scale & T-slot - Front finger guard - 1x freely movable foot switch - Rear safety guard + sheet metal chute - Operating instructions (PDF)

Condition: good (used), Year of construction: 2001, Bending length: 4000 mm Bending strength: 45 mm Anbiegung (kalt) / Pre-bending (cold): 38 mm Antriebsleistung / Drive power: 100 kW Anzahl Walzen / Number of rollers: 4 Adjustable rollers / Adjustable rollers: 3 Verstellungsart der Walzen / Adjustment type of rolls: hydraulisch Oberwalzendurchmesser / Top roll diameter: 710 mm Unterwalzendurchmesser / Bottom roll diameter: 640 mm Seitdwalzendurchmesser / Side roll diameter: 520 mm Arbeitsgeschwindigkeit / Working speed: 2+4 m/min (up to 8m/min) Gewicht Maschine (mit Walze) / Weight of machine (with roller): 78 t Zusatzausrüstung / Additional equipment: Elektronischer Gleichlauf / Electronic synchronization Luftgekühlter Öl-Kühler / Air-cooled oil cooler Obere Stützvorrichtung / Upper support device Seitliche Zylinderabstützvorrichtung (10t) / Lateral cylinder support device (10t) Ledpfjxp Ntpex Aabehn Infeed table (20t) / Infeed table (20t) hydr. Bladder accumulator / hydr. bladder accumulator Konusbiegenvorrichtung / Cone bending device

Year of construction: 2000, condition: used, Della Toffola NF5 mobile kieselgur plate filter 5 m², Aisi 304 - condition: used - location: Bremen - total height: 1.890 mm - total length: 1.200 mm - total width: 2.100 mm - remarks: - Working pressure: +6 Bar; - material in contact w/ medium: Aisi 304; Lsdet Ebizepfx Aabohn - filter medium: diatoms; 240 l tank with agitator for preparing the diatoms; - agitator arranged eccentrically in the upper bottom; - Agitator element: anchor agitator; - mobile frame on rollers with brake; - Weight: 510 KG

Condition: new, Year of construction: 2025, Schnittbereich quadratisch (B x H): 2600 x 100 mm Kürzeste Länge des abgeschnittenen Stücks : 1100 x 20 mm Kürzeste Reststücklänge im automatischen Betrieb*: 400 mm Kürzeste Reststücklänge im Einzelschnitt: 40 mm Electrical connected load: 34 kW Leistung des Sägemotors: 18,5 kW Leistung hydraulischer Motor: 7,5 kW Schnittgeschwindigkeit stufenlos regelbar: 20-100 rpm Saw feed speed: 1-700 mm / min Höhe der Materialauflage: 720 mm Sägeblattdurchmesser: 425 mm Lsdpfx Aajxlcausbehn Sägeblattbohrung: 50 mm Sägeblattdicke: 2,7 mm Length: 12000 mm Breite inkl. Späneförderer : 6300 mm Height: 3000 mm Weight of machine approx.: 28000 kg Standard configuration Variable blade speed controlled by inverterPrecision feed pressure & feed rate dual valve systemServo feeding motor with precision ball screwCombined guides with bearingsOil mist cooling de anti-vibration deviceP.L.C. control for all electric and hydraulic raulic pump with three-phase motorTwo sets of horizontal and vertical clamping devicesAdjustment baseRoller table

Condition: used, mileage: 4,05,000 km, Year of construction: 2006, Serial number: YS2R6X2000201xxxx Please contact ATS Norway for more information Ledpfx Aajw Raf Hobehn Please provide reference number upon request: 21128 Specifications: 2012 model Km: approx. 405,000 6x2 Euro 3 Axle distance: 350/132 cm Snowplow mount Engine brake Suspension: steel Underslung blade Box (see pictures) Tires (see pictures) New heater radiator New engine hoses VBG tow hitch AC/climate Radio/DAB Ready for delivery Description:2006 Scania R500 6x2 tipper truck with snowplow setup, including mount and underslung blade.The owner has a custom start button installed by Scania; sometimes the key won’t turn.The start button works every time.See video.Ready for delivery. Km: 405000 HK: 500 Technical approved: Yes EU-approved until: 09.06.2026 Own weight: 12810 Total Weight: 29000 Payload: 16115 Width: 255 Length: 740 Euro: 3 Model: R500 6x2 brøyterigget tippbil

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-slot plate comes from: a WOTAN drilling machine Lhedpfx Aaod E Hk Hjben -compatible with: Linear actuator ID 22786 -Travel: 1110 mm -Clamping plate: 1000 x 1260 mm (rotatable) -Plate is: Solid -Groove width: 21 mm -Dimensions: 2470/1070/H885 mm -Weight: 2200 kg

Condition: ready for operation (used), Year of construction: 1988, Immediately available ex-location: Hydraulic guillotine shear Fasti, type 509 25/6, year of manufacture 1988. Cutting length 2550 mm, material thickness 6 mm, electric backgauge 750 mm, drive 7.5 kW, weight 4 t. Price: EUR 5,500 plus VAT ex-location. Ljdpfx Aexqbnnjabohn

Condition: good (used), functionality: fully functional, Asymmetric 3-roll bending machine Plate roll-flanging machine BOMBLED - Model: 317 S Year: 1971 Maximum rolling thickness: 4 mm Maximum working length: 2050 mm Maximum flanging thickness: 3 mm Roll diameter: 153 mm Control: motorized Motor: 3 kW / 4 HP Approximate weight: 2100 kg Dimensions: 3100x1100x1400 mm Lhodpfxjxn Tgwo Aabsn

Condition: used, Padovan Green Filter 18 m² mobile Kieselgur stainless steel plate filter, Aisi 304 - condition: used - location: Bremen - total height: 2.950 mm - total length: 2.250 mm - total width: 1.500 mm remarks: - Filter medium: diatoms; Lhjdpfx Aajt Eb Azsben - tank with agitator for the preparation of diatoms; - Underbody opening diameter: approx. 400 mm;

Condition: ready for operation (used), Plate size: 2000 x 2500 mm Ledsxlg T Sspfx Aabshn Plate height incl. ribbing: 250 mm Weight:

Condition: good (used), Year of construction: 1991, machine/vehicle number: 120622, Offer 25305 Technical Data: - Max. working width: 2520 mm - Max. material thickness: 2.5 mm - Cutting angle: 2.2° - Strokes per minute up to: 25 1/min - Rear gauge with ELGO positioning control up to: 750 mm - Table height: 850 mm - Front angle stop: 2000 mm - Extendable front sheet support up to: 920 mm - 2 front support arms: 1000 mm each - Pneumatically assisted sheet holder, including front sheet chute - Electric foot switch - Inch/Single stroke selectable - Drive: 400 V / 3 kW - Space requirement approx. W 3450 x H 1150 x D 1700 mm - Weight approx.: 1600 kg Lodpfxexqd H Te Aabehn

Condition: used, Year of construction: 1980, Hydraulic guillotine shears, Kramer type TM III HY 2500 Cutting capacity 2500 mm Cutting thickness 12 mm elketr. backgauge Cutting gap adjustment Lodpsrfwyrofx Aabjhn

Condition: ready for operation (used), Year of construction: 1978, Available immediately from location: Lhedpfx Aaexqbnhjben LVD Hydraulic Guillotine Shear Type MVS 62/4 Year of manufacture 1978 Cutting length 6200 mm Material thickness 4.0 mm Digital backgauge 750 mm Drive 12.5 kW Weight 7500 kg Price: €5,500 plus VAT, ex location

Condition: used, functionality: fully functional, 11 leveling feet Thread made of galvanized steel / thread size: M20 x 150 mm Total height including foot: 150 mm Max. load capacity: 100 kg, suitable for floor anchoring Lodpfoxqmvdsx Aabehn Base plate: PA polyamide plastic, glass fiber reinforced, black, threaded spindle: galvanized steel, incl. nut. Compensation for uneven floors without the need for complex concrete foundations.

Year of construction: 1991, condition: ready for operation (used), Available immediately from location: Technoimpex hydraulic guillotine shear Lhsdpfxoxqbfme Aabjn Type HS 5 / 2550 Year of manufacture 1991 Cutting length 2550 mm Material thickness 5 mm Digital backgauge 1000 mm Drive 5.5 kW Weight 4 tons Price: EUR 4,500 plus VAT, ex location