6
.
Technical data:
Roll length 2040 mm
bending capacity 6 mm at 450 N/mm²
Bending capacity approx. 80% of the bending capacity
Upper roll diameter 170 mm
back roll diameter 170 mm
Bottom roll diameter 165 mm
.
Motor power main drive 7,5 PS
Engine power rear roller drive approx. 2 HP
dimensions , W x D x H approx. 3,4 x 1,1 x 1,3 m
Weight approx. 3,4 to
.
Equipment :
Cgwzy7j8g3
3-roller drive
Brake motor
Natural hard rollers approx. 1000 N/mm²
Treadle with off-switch front and rear
Grease...
4
Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet metal rolling machine
Qkvza3k8n
-Max. Sheet width: 1520 mm
-Max. Sheet thickness: 2.5 mm
-Roller diameter below: 88 mm
-Upper roller diameter: 88 mm
11
3-roll round bending machine make SCHÄFER type SRMVS 1500/13/8,5/7
machine # 3522 1500/15/8,5/7 year of construction 1971
Technical data:
bending length 1540 mm
max. sheet thickness 13 mm
bending capacity ST/VA 8,5 / 7,0 mm
roll diameter upper and lower rolls 210 mm
electrical main fuse 50 A
outer dimensions approx. 4000 x 1300 x 1900 mm
weight approx. 5,6 t
with
- 3 rollers driven
- all 3 rollers motor adjustable
- motorized inclined adjustable lower rolls
- suitable for conical bending
- fol...
10
- max. bending length 1500mm
Cgzaf9dcte
- max. sheet thickness 5mm
- additional support bearings on the lower rolls
- pneumatic folding bearing
- 2 pneumatic straightening cylinders
4
Sheet width 1250 mm
sheet thickness 5,5 mm
bending 5,0 mm
roll length 1280 mm
smallest diameter 210 mm
roll diameter - top 140 mm
weight 1365 kg
dimension L-W-H 2.020 x 900 x 1.200 mm
Standard equipment:
- Central rolls driven by electric motor, rotary reduction gear and
gear drive
- Top roller can be swung out to the side
- Main motor with braking device
- Conical bending device
- Mobile control panel and foot pedal
- CE mark/declaration of conformity
Special equipment:
- motorized rear rolle...
1
3 roll plate bending machine (600 x 4 mm)
SMA-REF-7100
Type: roll bending machines
Manufacturer: Jammes
Model: Rollexpress 32.0604
Year: 1997
Working range:
Sheet thickness: 4 mm
3pljk9z9
Bending width: 600 mm
Condition:
ready for action
stored
Location: Western Germany
Availability: on demand
8
UBBDA Three Roll Plate Bending Machine
The three-roll sheet bending machine is designed for the production of cylindrical and conical sheet shells.
Email motors 42 kW, 580 rpm,
750\1500 rpm
Gf0c3lx
Dimensions 12900x5300x5620
Gross weight 166260 t
4
Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet metal rolling machine
-Spare part top roller
-Drawing with the pictures
-Max. Sheet width: 2060 mm
-Max. Sheet thickness: mm
-Roller diameter: 141 mm
Zaxdot3i3
-Bearing diameter: 75 mm
-Transport dimensions: 2690/141/H141 mm
-Weight: 290 kg
6
3-roll round bending machine Ostas ORM 1270 x 140
Technical specifications:
Special equipment included in the price:
motorized lower roll adjustment
hardened rolls
motorized rear roller adjustment
digital display
sheet width 1270 mm
sheet thickness 5,0 mm max.
sheet thickness 4,0 mm bending
roll length 1270 mm
Bj0kpdx2jz
roll diameter 140 mm
weight 1400 kg
dimension L-W-H 2500 x 800 x 1100 mm
Motor: 2.2 KW
Equipment:
upper and lower roller electrically driven
upper roller can be swung out
conica...
5
.
Model RBM
Machine No. 7719004
.
Technical data:
Roll length 2040 mm
bending capacity 12 mm at 40 kp/mm²
bending capacity approx. 80% of the bending capacity
upper roll diameter 225 mm
back roll diameter 225 mm
Bottom roll diameter 225 mm
Motor power main drive 15 HP
Motor power rear roll drive approx. 5,5 PS
dimensions , W x D x H approx. 3,45 x 1,1 x 1,4 m
Weight approx. 4,5 to
.
Other : asymetric whale arrangement
2-roller-drive
motorized feed of the rear roller
hardened rollers
eme...
6
3-roll round bending machine
Mx2rx8
upper roll 165 mm
bottom rolls 145 mm
passage width 2000 mm
2,2 KW
2
Manual 3-roll plate round bending machine make GEKA type R 6
make # 837, year of manufacture 1991
Technical data:
working width 1540 mm
max. sheet thickness 1,0 mm
roll diameter 65 mm
weight approx. 250 kg
dimensions approx. 1800 x 800 x 1300 mm
H88sykcp
with
- rear roller adjustable with handwheel
- upper roller can be swung out
used, in good condition
2
working width: 1050 mm
metal sheet thickness: 1,5 mm
upper roller-Ø: 70 mm
below roller-Ø: 70 mm
weight: 320 kg
Njw93ychg
space needed: 700 x 1300 x 1100 mm
5
Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet metal rolling machine
-Max. Sheet width: 1030 mm
T077pwo9u
-Max. Sheet thickness: 1.25 mm
-Roller diameter below: 50 mm
-Top roller diameter: 50 mm
-Delivery: via handwheels
-Dimensions: 1600/550/H480 mm
-Weight: 150 kg
8
Fastech 3-roll round bending machine FRS 2050 x 140
Technical specifications:
Special equipment included in the price:
hardened rolls
motorized back roll adjustment
motorized bottom roll adjustment
2 x digital display
sheet width 2050 mm
sheet thickness 4,5 mm max.
B9tnqniglz
sheet thickness 4,0 mm bending
roll length 2050 mm
roll diameter 140 mm
smallest bending diameter 210 mm
weight 1530 kg
dimension L-W-H 3240 x 900 x 1200 mm
Motor:2,2 KW
Equipment:
upper and lower roller electr. driven
uppe...
3
used
fully hydraulic 3-roll profile bending machine STÖLTING
model RP 12
year of construction 1985 / 1999
.
Technical data:
Roll diameter 230 mm
Max. Resistance torque 12
Bending capacity see enclosed data sheet
Bending speed 0 - 5 m/min
Main motor 5,5 kW
Dimensions , W x D x H approx. 1,2 x 1,3 x 1,2 m
Weight approx. 1,25 to
.
Bending capacity according to offer
.
Qwfz7
.....
Other : 3-roller drive
Asymmetric version
1
Hardened rollers (standard) for a wide spectrum of materials
Taper bending fixture
Motorized rear roller adjustment
Syohdjo
Rigid steel construction
High quality steel rollers
2 driven rolls
Top roller swings out
Lower roll with manual feed, motorized feed available as an option
Central lubrication
Separate control panel
Meets CE requirements
1
2030x3,0 mm, with wire insert grooves, manual feed of the
rear roller, foot switch right/left run
Ccpjqwfui0
Machine will be repaired, inspected, cleaned and fully functional by a specialist. Test run will be carried out.
Color: blue/grey
Total power requirement: 32 A
Machine weight: 1400 kg
space requirement: 3000 x 900 x 1100 mm
motor power: 2,2 kW
roll diameter: 110 mm
bending: 2,0 mm
working width: 1030 mm
metal sheet thickness: 1 mm
upper roller-Ø: 60 mm
Iw8bipcy0
below roller-Ø: 60 mm
weight: 170 kg
space needed: 560 x 1570 x 1080 mm
1
3 roll plate bending machine (3.000 x 4 mm)
B9mopbyv2m
SMA-REF-7014
Type: roll bending machines
Manufacturer: Schäfer
Model: SRMN 3000 x 4
Year: 1971
Working range:
Sheet thickness: 4 mm
Bending width: 3.000 mm
Condition:
ready for action
stored
Location: Western Germany
Availability: on demand
6
Fastech 3-roll round bending machine FRM 1250 x 90
Technical specifications:
Special equipment included in the price:
hardened rolls
motorized back roll adjustment
digital display
sheet width 1250 mm
sheet thickness 3,0 mm max.
sheet thickness 2,5 mm bending
roll length 1250 mm
roll diameter 90 mm
smallest bending diameter 130mm
weight 500 kg
dimension L-W-H 1950 x 900 x 1130 mm
Motor:1.1 KW
Equipment:
upper and lower roller electr. driven
upper roller can be swung out
conical bending device
asy...
5
Bending length: 1,600 mm
Sheet thickness: 2.8 mm
Wire thickness: 8 mm
Roll diameter: 100 mm
Bysnb7gk
Equipment: wire bending device
Mode of operation: manual
Footprint: 1.800 x 700 mm
Dimensions: 2.500 x 700 x 1.050 mm
Weight: 0,69 t
7
Technical data:
-Manufacturer: Binmak
Bhgmgf3hqe
-Type LBS 1050x130
-Country of origin: Turkey
-Year 2020
-Working area approx. 1050x5,5mm
-round rolls up to 5,5mm possible
-the rollers are hardened
-with digital display
-with electric back roller
-suitable for conical rolling
-with foot pedal
-electric approx. 2,2 kw
-own weight approx. 1220Kg
-roller diameter: approx. 130mm
-Machine with cast iron housing
-Sideways swiveling top roller
-Mobile control panel and foot pedal separate from the mac...
6
ABKANTBANK-Technik Halver,
YOUR competent partner for round bending machines, press brakes and impact shears.
We are your partner for high quality sheet metal working.
As a distribution partner of the Polish manufacturer PROD-MASZ for many years, we respond to the needs of our customers on site and see ourselves as an extended arm of the production.
Appropriate machines can be demonstrated if required, in addition to competent advice and professional instruction.
We advise you individually - acc...
working width: 1030 mm
metal sheet thickness: 1 mm
upper roller-Ø: 60 mm
Zxy8p9m
below roller-Ø: 60 mm
weight: 170 kg
space needed: 560 x 1570 x 1080 mm
7
Fastech 3-roll round bending machine FRS 1550 x 140
Technical specifications:
Special equipment included in the price:
hardened rolls
motorized back roll adjustment
motorized bottom roll adjustment
2 x digital display
sheet width 1550 mm
sheet thickness 5,0 mm max.
sheet thickness 4,0 mm bending
roll length 1550 mm
roll diameter 140 mm
smallest bending diameter 210 mm
weight 1420 kg
dimension L-W-H 2320 x 900 x 1200 mm
Motor:2,2 KW
Equipment:
upper and lower roller electr. driven
upper roller ca...
8
Technical data:
-Manufacturer: Binmak
-Type 3-LBS 1250x140
-Country of origin: Turkey
-Year 2020
-Working area approx. 1250x5,5mm
-Round rolls up to 5,5mm possible.
-the rolls are hardened
-with electric hiner roller
-with digital display
-for conical rolling
-with foot pedal
-electric approx. 2,2 kw
Cqqdeovd8
-own weight approx. 1220Kg
-roller diameter: approx. 140mm
-Machine with cast iron housing
-Sideways swinging out upper roller
-Main motor with braking device
-Mobile control panel and foo...
6
ABKANTBANK-Technik Halver,
YOUR competent partner for round bending machines, press brakes and impact shears.
We are your partner for high quality sheet metal working.
As a distribution partner of the Polish manufacturer PROD-MASZ for many years, we respond to the needs of our customers on site and see ourselves as an extended arm of the production.
Appropriate machines can be demonstrated if required, in addition to competent advice and professional instruction.
We advise you individually - acc...
8
Fastech 3-roll round bending machine FRM 1050 x 90
Technical specifications:
Special equipment included in the price:
hardened rolls
motorized back roll adjustment
digital display
sheet width 1050 mm
sheet thickness 3,3 mm max.
sheet thickness 3,0 mm bending
roll length 1050 mm
roll diameter 90 mm
smallest bending diameter 130mm
weight 475 kg
F32nwlb
dimension L-W-H 1750 x 800 x 1130 mm
Motor:1.1 KW
Equipment:
upper and lower roller electr. driven
upper roller can be swung out
conical bending de...
6
Ostas 3-roller round bending machine SBM 1270 x 95
Special equipment included in the price:
Svhrzg
Hardened rollers
Motorized rear roller adjustment
Digital display
Features:
- Asymmetrical 3-roller round bending machine with motorized drive
- Hardened rolls
- Motorized rear roll adjustment
- Digital display
- Upper roll can be swung out
- Conical bending device
- foot switch
Technical details:
- sheet width: 1270 mm
- sheet thickness: 3,0 mm
- roll length: 1270 mm
- Roll diameter: 95,0 mm
- Sma...
6
Ostas 3-roll round bending machine ORM 1070 x 110
Technical specifications:
Special equipment included in the price:
Bshs9rskga
hardened rollers
motorized rear roller adjustment
digital display
sheet width 1070 mm
sheet thickness 5,0 mm max.
sheet thickness 4,0 mm bending
roll length 1070 mm
roll diameter 110 mm
weight 1000 kg
dimension L-W-H 2250 x 800 x 1100 mm
Motor: 2.2 KW
Equipment:
upper and lower roller electrically driven
upper roller can be swung out
conical bending device
asymmetric ro...
8
Cesurbend 3-roll round bending machine MRS 1550 x 140
Technical specifications:
Special equipment included in the price:
B7nr30odsk
motorized lower roll adjustment
hardened rolls
motorized rear roller adjustment
digital display
sheet width 1550 mm
sheet thickness 5,0 mm max.
sheet thickness 4,0 mm bending
roll length 1550 mm
roll diameter 140 mm
weight 1360 kg
dimension L-W-H 2320 x 850 x 1200 mm
motor: 2.2 KW
Equipment:
upper and lower roller electr. driven
upper roller can be swung out
conical...
7
Cesurbend 3-roll round bending machine MRS 1050 x 110
Technical specifications:
Special equipment included in the price:
motorized lower roll adjustment
hardened rolls
motorized rear roller adjustment
digital display
sheet width 1050 mm
sheet thickness 5,0 mm max.
sheet thickness 4,0 mm bending
roll length 1050 mm
roll diameter 110 mm
weight 1080 kg
dimension L-W-H 1820 x 850 x 1150 mm
Motor: 2.2 KW
Equipment:
upper and lower roller electr. driven
upper roller can be swung out
B7nrcaejhq
conical...
6
Fastech 3-roll round bending machine FRS 1250 x 140
Technical specifications:
Special equipment included in the price:
hardened rolls
motorized back roll adjustment
motorized bottom roll adjustment
2 x digital display
sheet width 1250 mm
sheet thickness 5,5 mm max.
sheet thickness 5,0 mm bending
roll length 1250 mm
roll diameter 140 mm
smallest bending diameter 210mm
weight 1365 kg
dimension L-W-H 2020 x 900 x 1200 mm
Motor:2,2 KW
Equipment:
upper and lower roller electr. driven
upper roller can...
5
Ostas 3-roll round bending machine SBM 1070 x 95
Features:
Asymmetric 3-roll round bending machine with motor drive
Special equipment included in the price:
Hardened rolls
Motorized rear roller adjustment
Digital display
Top roller can be swung out
Bshtmcdwpk
Conical bending device
Foot switch
Technical details:
sheet width: 1070 mm
sheet thickness: 3,0 mm
roll length: 1070 mm
Roll diameter: 95,0 mm
Smallest bending diameter: 140,0 mm
Motor power: 1,1 kW
Dimension L-B-H: 1350 x 760 x 1250 mm
Wei...
10
Cesurbend 3-roll round bending machine MRS 1250 x 140
Technical specifications:
Special equipment included in the price:
hardened rolls
motorized back roll adjustment
digital display
sheet width 1250 mm
sheet thickness 5,5 mm max.
Cscjsl00m
sheet thickness 5,0 mm bending
roll length 1250 mm
roll diameter 140 mm
weight 1150 kg
dimension L-W-H 2020 x 900 x 1200 mm
motor: 2.2 KW
Equipment:
upper and lower roller electr. driven
upper roller can be swung out
conical bending device
asymmetric roller ...
10
Fastech 3-roll round bending machine FRS-S 2050 x 190
Technical specifications:
Special equipment included in the price:
hardened rolls
motorized back roll adjustment
motorized bottom roll adjustment
2 x digital display
sheet width 2050 mm
sheet thickness 7,0 mm max.
Gfzq9d9
sheet thickness 6,0 mm bending
roll length 2050 mm
roll diameter 190 mm
smallest bending diameter 285 mm
weight 2.695 kg
dimension L-W-H 3600 x 1100 x 1200 mm
Motor:4 KW
Equipment:
upper and lower roller electr. driven
upper...