Used Ctp System for sale (40,672)

Condition: used, Techman Type: Techman Robot TM5-900 The TM5-900 is equipped with an integrated image analysis system, which gives it the ability to "see," allowing it to handle assembly automation and inspection tasks with maximum flexibility. Dsdpfozg Eyaex Aidjwd It works in collaboration with humans, sharing the same tasks without compromising productivity or safety. It offers the highest level of precision and efficiency while operating in the same workspace. The TM5-900 is the ideal cobot for the electronics, automotive, and food industries. Payload: 4 kg Reach: 946 mm Weight: 22.6 kg Perfect for Industry 4.0 Highest flexibility and adaptability Extremely low costs for automation and maintenance The TM5-900 is a true plug & play solution. Connect a monitor, mouse, and keyboard to the control unit, and the TM5-900 will be ready for use in just a few steps. Scope of delivery: Techman Robot TM5-900 Control unit, connection cable Operating device 2 calibration plates for the camera system 1 landmark Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, BÖLLHOFF Type: 9524-640-824-5 RIVSET Punch Rivet System with Punch Rivet Pliers Operating voltage: 400V 50 Hz Rated current: 12A Main fuse: 35 A Control voltage: 24 V Signal voltage: 0-10 V with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 max. permissible riveting pressure: 250 bar max. permissible riveting force: 78 kN Weight of the pliers: approx. 279 kg Year of manufacture: 2012 Djdpfx Aiszgaabsdswd The system was inspected by the manufacturer and is fully functional. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, DSM Type: DS 57 MDW, DS 57 SA + PosiControl + MultiPro TA Fastening system Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) Dodpfszgabfjx Aidowd We will be happy to answer any further questions you may have over the phone.

Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. Dedpezgci Ejfx Aidswd The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, DÜRR Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Dsdpfxjzgckcs Aidewd Technical machine description: Condition of the system: The drum pump, feed hoses, dispensing unit, etc., are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure: Max. 6 bar Dimensions: Approx. 1.5 x 1 x 1.5 meters 1 adhesive control unit DÜRR (110017040) 1 single drum pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: new, 1 brand-new universal milling head system "HURON" with hydraulic tool clamping Manufacturer: EMENA - MTE, Origin: Spain Model: VAR 3 - BF, BM, COMPACT Technical data: Spindle mounting: DIN 69871 ISO 50 Overhang: 358 mm Max. speed range: 3000 rpm Max. drive power: 22 kW Mounting flange: Outer diameter: Ø 306 mm Dimensions L x W x H: 460 x 306 x 360 mm Weight: approx. 150 kg Dodpfxozdbxbs Aidewd Accessories / Special features: • 2 swivel plane system "HURON" • Hydraulic tool clamping • For retrofitting to conventional, NC or CNC milling machines or panel milling machines or drilling machines (e.g.: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) Delivery time: approx. 12-14 weeks after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: new, HAHN-Automation Type: BDE11154003 Resistance welding system The system is designed for the automated resistance welding of the following components: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any other use of the system than that described above is not intended and is therefore not permitted! System layout Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (l x w) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Dwsdpszd Rmgjfx Aidjd Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Controller: ST-T13V2.0 Power supply: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction system TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Condition: unused, machine has never been used in production Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Eos EOSINT P 380 Eos EOSINT plastic laser sintering system P380 The following items are included with the EOS P380 system: Build volume container Powder container Overflow container Cooler: Termo TEK thermochiller, type: 802-18644-3 Unpacking stamp Removal trolley 3DM 8-zone process chamber heater, 250°C Each zone can be set individually, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Dwsdpfx Aiozdywzedsd Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse rating 32 A MAX. laser power 100 W Laser class (open) 4 Laser class (closed) 1 Weight 850 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Desktop Metal Desktop Metal 3D Printer Complete System 3D Metal Printer Studio System from Desktop Metal Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Includes: Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: In contrast to laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods – similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell fillings for lightweight strength. Desktop Metal Studio Debinder (Delamination machine) Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. Desktop Metal Studio Sinter Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305x205x205 mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Dwjdpfx Ajzd Tllsidjd Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles, tailored to each design and material, ensure uniform heating and cooling without the residual stresses that occur in laser-based systems. Condition: used Scope of delivery: (See image) (Changes and errors in technical data, information is subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Iridex Djdpfxjzd Ut Rs Aidswd Type: IRIDEX OcuLight TX Iridex Laser Systems OcuLight TX IRIDEX OcuLight TX Green 2.5 W 532 nm laser system, main console including foot pedal, key, and cables. The OcuLight TX solid-state laser systems emit true green continuous-wave laser light (532 nm) for ophthalmological applications. The OcuLight TX and GLx models are also indicated for otolaryngological applications. Improper use of the laser system can result in undesirable side effects. OcuLight TX Ophthalmology: Retinal photocoagulation Laser trabeculoplasty Iridotomy Iridoplasty Otolaryngology: Stapedectomy Stapedotomy IRIDEX OcuLight TX Green 532 nm Laser Excellent efficiency with a powerful 2500 mW of laser energy provides pulse durations and pulse intervals from 10 to 3000 ms. Offers TrueCW laser pulses for maximum control and precision. Flexible range of delivery devices and a wide selection of handpieces for different surgical procedures. Optional remote control and wireless foot switch to reduce clutter and improve ergonomics and control. Quiet operation eliminates distractions. The lightweight, portable design is easily transported between treatment rooms and offices. IRIDEX OcuLight TX Green 532 nm Laser Green treatment laser: 532 nm Target laser: nominally 632 nm Cooling: On-demand whisper fan 10–3000 ms exposure duration and repetition interval Compatible with EndoProbe, LIO, OtoProbe, and SLA Power output: EndoProbe 0–2000 mW, LIO 0–2000 mW, OtoProbe 0–2500 mW, SLA 0–1800 mW Weight: 6.4 kg Length: 15 mm Width: 30 mm Height: 30 mm Condition: used Scope of supply: (See picture) (Subject to changes and errors in technical data, information provided is without guarantee!) We will be happy to answer any further questions you may have by telephone.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: A25-S5-22-48417, input voltage: 230 V, overall weight: 51 kg, Dear Sir or Madam, We are selling: FARO Quantum S MAX 2.5 m, year of manufacture 2022, fully functional, current calibration available, including CAM2 Probing Edition with an unlimited CAM2 license and USB dongle, complete with all accessories. - Arm reach: 2.5 m - Number of axes: 7 Sale only to business customers; no warranty. Equipment: Dsdozxn E Nopfx Aidswd - Calibration kit - Transport case - Mounting plate - 3 mm and 6 mm iProbes - USB cable - Power cord 230 V - Rechargeable battery - Mount G3+, magnetic holder 150 mm - Measuring software CAM2 Probing Edition 1, unlimited license for CAM2 - USB dongle, single-user license Please contact us if you have any questions.

Condition: new, 1 brand new universal milling head in standard or extended version for retrofitting to conventional, NC, or CNC milling machines or drilling machines of any type, system "HURON", swiveling over 2 levels, every angle adjustable Mounting: ISO 40 Overhang: approx. 360 mm Designed drive power: 10 HP Max. speed: 1,800 rpm Weight in standard version: approx. 82 kg Accessories / Special Features: • Manual tool clamping • The main spindle and all shafts and engagements are made of case-hardened and tempered chrome-nickel steel • 2 axes that can rotate relative to each other, allowing every setting angle! System „HURON“ • Tapered engagements are ground according to the „KLINGELNBERG“ system • The roller bearings of the main spindle consist of tapered high-precision rollers Dedpfjdbny Esx Aidewd • 1 tool clamping screw Delivery time: approx. 12-14 weeks after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, Year of construction: 2025, Compact design Highest reliability High suction power Integrated pre-separator 100% air recirculation, residual dust content < 0.1 mg/m³ Low noise emission Extended filter service life Easy emptying Supplied ready for connection with rotary valve Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Suction nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volume flow: 4,900 m³/h / 6,000 m³/h Nominal volume flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Rotary valve capacity: 15,816 L/h Dwodpohkzu Asfx Aided Weight: 920 kg Location: In stock at warehouse 54634 Bitburg - immediately available - Subject to prior sale

Condition: new, Year of construction: 2025, Chip extraction unit ASA 2803 Mobile, with a 180° rotatable extraction unit For milling, planing, and sawing chips (not suitable for dust) The 180° rotatable extraction unit enables chip extraction from below or above Robust metal fan impeller Standard equipment includes a high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip bags Fine filter bag, double-woven Dimensions and weights Chip collection volume: 2 x 120 l Outer diameter of extraction nozzle, inlet: 203 mm Outer diameter of extraction nozzle, outlet: 1 x 100, 2 x 120 mm Length approx.: 1500 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 53 kg Electrical data Idle speed: 2950 min¯¹ Power consumption: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2 x 1.92 m² Noise emission Sound pressure level max.: 87.5 dB(A) Volume flow Nominal volume flow: 2800 m³/h Maximum negative pressure: 1900 Pa Scope of delivery: Two filter bags, two chip bags Location: In stock at warehouse 54634 Bitburg Dwsdpfshk S Sdsx Aidod - immediately available -

Condition: used, Fiber laser, fiber laser cutting system with flat bed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer: DURMA Type: HD-F III 3015 III BH-IPG 2kW Serial No.: 822817712 Year of manufacture: 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area: 3000 x 1500 mm Tube cutting device: up to Ø 400 mm Laser power: 2000 watts (fiber laser) Output power: 0.2..2 kW Wavelength: 1070..1080 nm IPG power consumption: 6.4 kW/hour - Polarization random - Collimating focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameter in single mode 50, 100, 200, 300 µm Dodpfjkdnv Tex Aidowd - Max. power consumption 42 kW - Power consumption machine 20 kW - Power consumption filter 4 kW - Power consumption cooler 10+1 kW - Power consumption resonator 7 kW Mild steel sheet thickness max. 12 mm - Stainless steel sheet thickness max. 6 mm - Aluminum sheet thickness max. 6 mm - Copper sheet thickness max. 3 mm - Brass sheet thickness max. 6 mm Working area X-axis 3060 mm Working area Y-axis 1530 mm Working area Z-axis 160 mm Sheet size max. 3048 x 1524 mm Sheet weight max. 200 kg/m² - IPG fiber laser resonator (see separate document) - Water cooling unit for laser source and cutting head (see separate document) - Under-table extraction and extraction filter system (see separate document) - with 2-position shuttle table - Tube laser with 4-jaw chuck and large spindle bore next to the flat bed - Guides for tube laser on linear guides - with CAD software - with nesting software - with tube laser software very good condition

Condition: new, Please choose the desired size: new, galvanized: Depth: 305,381,457,610,762,914 width: 610,762,915,991,1219 Special load: 100-250 kg/Shelf Metric scaling: new, galvanized Depth: 300,400,500,600,700,800 Width: 800,1000,1200 Dwodpfsduz Sqox Aidjd Special load: 120-250 kg/shelv Stand size: new, galvanized 2 m, 2.5 m, 3 m, 4 m Used, RAL 7042: 610 * 915 mm For larger purchases, we offer a discount. Ask our price for Transport cost. We are dealing with rebuying, selling, assembling the shelves. Here you can find pallet racks, cantilever racks etc.

Condition: used, machine/vehicle number: 008245, Max. panel width: 1000 mm Max. panel length: 2500 mm Dwodpfxeywad Rj Aidod Length of conveyor: 11500 mm Introduction system: with pushers

Condition: new, Year of construction: 2021, machine/vehicle number: 212288, Equipment: documentation/manual, type plate available, We offer this new GOM ATOS Q measuring system with a measuring volume of 270, manufactured in 2021. Dwsde Agv Irepfx Aided Manufacturer: GOM Model: ATOS Q Measuring volume: 270 Year of manufacture: 2021 Measuring volume 270 for ATOS Q Rotary/swivel head (Bento/Balsu) Column stand 1.8m with 0.9m cantilever Motorized rotary table – GOM ROT 350 Transport track on rollers with work surface Image processing computer 5820 24" TFT monitor with monitor case Dongle, external Condition: new If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, ✅ Professional parts cleaning machine RESY – buy now at a great price! Are you looking for a powerful and robust parts cleaning machine for larger batches? Then our RESY series is just the thing for you! All models are made entirely of stainless steel – including the special pump. This new development offers the highest quality and durability for industry and trade. Available in three sizes: RESY 1250 – Rotating table 1150 mm – AVAILABLE FOR IMMEDIATE DELIVERY RESY 1500 – Rotating table 1350 mm RESY 1650 – Rotating table 1500 mm (Other sizes available upon request!) Features & Benefits: ✔️ Material: Stainless steel – corrosion-resistant & durable ✔️ Rotating table: 1150 / 1350 / 1500 mm, depending on the model ✔️ Spray capacity: 500 l/min ✔️ Spray working pressure: 2x 2 Hp (RESY 1250) or 2x 2.2 Hp (RESY 1500/1650) ✔️ Heating power: 2x 7.5 kW – fast heating Dwjdpfx Ao Agnx Ajided ✔️ Temperature control up to 60 °C ✔️ Basket capacity: 300 kg ✔️ Programming of the working time ✔️ Loading trolley included ✔️ Glass window included (for RESY 1500 & 1650) or optional (for RESY 1250) ✔️ Voltage: 380 – 400 V ✔️ Weight without liquid: 400 kg (RESY 1250/1500) or 500 kg (RESY 1650) Perfect for: – Workshops – Industrial companies – Job shops – Maintenance Other systems available from us: ✅ Immersion tank ✅ Paint stripping tank ✅ Mobile extraction systems ✅ Washing systems ✅ Powder coating oven ✅ Spray booth ✅ Extraction system + make-up air system ✅ Mirroring technology Delivery & Warranty: Our parts washing systems are custom-made – delivery time approx. 7 – 14 working days. Delays may occur in case of high order volume. 1 year manufacturer's warranty included! Contact: Do you have any questions or would you like a customized offer? Our support team is available for you at any time! Request now – we look forward to hearing from you!

Condition: used, Used Sterling Fluid Systems Liquid Ring Skid Mounted Compressor Skid: Comprises Sterling Fluid Systems Model KPHY 65112 1.4408 Stainless Steel Two Stage Liquid Ring Vacuum Compressor. Rated 265m3/h (154cfm) capacity with 1013mbar (14.7psi) input and 3.5bar (50.8psi) maximum over pressure. Direct driven by 36/40kW 400/690 volt 3/50 1484/1480 rpm motor rated EEX E II T3/T1&T3. Mounted on skid with Sterling 240 Litre Stainless Steel Vertical Receiver rated 4.5 bar maximum working pressure. Also includes (2) GSD Waermtechnik 4.9m2 Horizontal Stainless Steel Heat Exchangers rated 19kW capacity each. Tubes 12 litre capacity rated 4.5 bar design pressure at -20/+50 degC. Shell 42 litre capacity rated 4.5 bar design pressure at 90 degC. Specifications: Capacity: 156.1 ft³/min. Motor Power: 48.2 hp Material Of Construction: 1.4408 Stainless Steel Vacuum Rating: 1013 mbar input, 3.5 bar max overpressure Speed: 1484/1480 rpm Dodo Agv Taspfx Aidowd

Condition: used, EOL Type: EOL EMP 242 Active cooling system Condition: used Scope of delivery: (See image) Djdpfjzd Uuzjx Aidewd (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), mileage: 6,62,902 km, power: 324 kW (440.52 HP), first registration: 05/2007, fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: other, gearing type: mechanical, Equipment: crane, = Additional options and accessories = - PTO = Remarks = WMAH39ZZ87M481962 = More information = General information Year of construction: 2007 Registration number: 1FJQ308 Axle configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels Weights Empty weight: 16.610 kg Carrying capacity: 15.390 kg GVW: 32.000 kg Functional Crane: HIAB 166 E-3 HIPRO Make of bodywork: HIAB 166 E-3 HIPRO Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Dsdpfx Aoymrmnsidowd Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), mileage: 6,46,006 km, first registration: 10/2014, fuel type: diesel, axle configuration: 6x4, wheelbase: 3,200 mm, fuel: diesel, fuel tank capacity: 600 l, brakes: engine braking, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, navigation system, parking heater, power mirror, soot filter, spoiler, = Additional Options and Accessories = - Power brake booster - Roof spoiler - Low noise - Speed limiter - Tipping hydraulics - Air suspension - Air horn - Particulate filter - Sleeper cab - Sun visor - Stability control - Parking heater - Power take-off (PTO) = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 10,300 kg Transmission Transmission: I-SHIFT, automatic Axle Configuration Front axle: Steered Rear axle 1: Dual tires Rear axle 2: Dual tires Condition Technical condition: Very good Visual condition: Very good Financial Information Price: On request VOLVO FH 500 6X4 Tractor Unit Dwedpfxjx Up Aqe Aidsd EURO 6 L PACKAGE 500 HP DRIVE 6X4 PLANETARY AXLE AIR SUSPENSION WHEELBASE 320 CM FH GLOBETROTTER CAB OPTIONS: - AIR CONDITIONING (CLIMA) - NAVIGATION SYSTEM - FRIDGE - MICROWAVE I-SHIFT AUTOMATIC TRANSMISSION ALUMINUM FLOOR LED HYDRAULIC CONNECTIONS LARGE DIESEL TANK 600 LITERS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: good (used), mileage: 6,53,000 km, power: 170 kW (231.14 HP), first registration: 07/1995, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 4,050 mm, fuel: diesel, fuel tank capacity: 300 l, color: orange, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro2, suspension: steel, permissible axle load (axle 1): 7,100 kg, permissible axle load (axle 2): 11,500 kg, Equipment: ABS, differential lock, = Additional Options and Accessories = - 6-speed manual transmission - Heated exterior mirrors - Leaf spring suspension - Comfort driver's seat - Differential lock - Speed limiter - Hydraulic system - Radio/CD player - Rotating beacon - Power Take-Off (PTO) - Power Take-Off (PTO) = Notes = GOOD CONDITION M.A.N. 17.232F (F90 / 6-CYLINDER ENGINE) 4x2 FULL STEEL CHASSIS WITH CONTAINER SYSTEM & MANUAL GEARBOX!! 230HP, EURO 2, 6-CYLINDER ENGINE (MECHANICAL PUMP & INJECTORS)!! 6-SPEED MANUAL GEARBOX!! FULL STEEL SUSPENSION!! LOCKING DIFFERENTIAL!! P.T.O.!! HYDRAULIC KIT!! ETC.!! CONTAINER BODY!! SIZE OF CONTAINER SYSTEM; LENGTH x WIDTH x HEIGHT Approx.: 4.70 m x 2.50 m!! TRUCK IS IN GOOD WORKING CONDITION, READY FOR THE JOB!! MORE M.A.N. 4x2 / 6x2 / 6x4 / 6x6 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE; SHIPMENT, STACKING, TRANSPORT, OR LOADING? NO PROBLEM FOR US, WE ARE AN "ONE-STOP SHOP" COMPANY!! YOU CAN ALSO CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( / ) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" Dodozu R Rgspfx Aidowd = Further Information = General Information Year of construction: 1995 Technical Information Number of cylinders: 6 Engine displacement: 6,587 cc Transmission Transmission: ZF 6 GEARS MANUAL, 6 speeds, manual transmission Axle Configuration Tire size: 315/80R22.5 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Max. axle load: 7100 kg; Steered; Tire tread depth left: 40%; Tire tread depth right: 40% Rear axle: Twin tires; Differential lock; Max. axle load: 11500 kg; Tire tread depth left inside: 20%; Tire tread depth left outside: 20%; Tire tread depth right inside: 20%; Tire tread depth right outside: 20%; Reduction: single reduction Weights Unladen weight: 8,180 kg Payload: 8,820 kg GVW: 17,000 kg Functional Body brand: MEILLER CONTAINER BODY Height of loading area: 100 cm Condition Technical condition: very good Optical condition: very good Further Information Please contact the Sales Department for further information.

Condition: excellent (used), mileage: 3,76,777 km, power: 132 kW (179.47 HP), first registration: 04/2011, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: automatic, emission class: euro5, Equipment: ABS, electric window regulation, fog lights, power mirror, = Additional options and accessories = - Air horn - Air suspension - Leaf spring - Power take-off (PTO) - PTO - Radio/Cassette player - Radio/CD player - Speed limiter - Sun visor = Remarks = Dwodpeymripefx Aidod ZCFA1AD0402579456 = More information = Year of construction: 2011 Front axle: Steering Empty weight: 5.410 kg Carrying capacity: 4.590 kg GVW: 10.000 kg Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A