Used Cts for sale (658)

Condition: excellent (used), CTS Temperature testing chamber T-55/1000 Li, water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Rated current: 18 A Compressor: TFH2511Z / TFH2511Z, refrigerant R404A/R23 The type designation of the CTS chamber series is as follows: e.g., Type T -55/1000/Li 1) T means: Temperature 2) -55 means: lower temperature -55°C 3) 1000 means: 1000-liter test chamber volume 4) Li means: special equipment for testing with lithium-ion batteries Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for customer-specific control of the test item Test chamber lighting: energy-efficient, bright LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with max. rack load 100 kg 1a Conduit NW50 1b Conduit 2x NW125 1c Conduit 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Thermal compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test item, without thermal compensation and without additional equipment. Options can affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, Width, approx. 860 mm, Depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, Width, approx. 1270 mm, Depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at a distance of 1 m from the front) Weight approx. 1000 kg Heat dissipation to the installation room 10.4 kW Refrigeration unit: water-cooled, low-noise, fully hermetic stepless power adjustment by electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: Ljdpjzg Ty Uofx Abyehl 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature testing cabinet Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific test specimen control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20 °C approx. 2500 W at +0 °C approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Lsdozg Ty Iopfx Abyjhl Weight: 600 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door hinge on the left, one-hand operation, lockable. Insert shelf: stainless steel, support surface 970 x 980 + 500 mm Load per shelf max. 35 kg Total load with max. shelf configuration 100 kg Test chamber lighting: 3x halogen lamp 20 W, 12 V Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text RS 232 interface free switching channels for on-site test specimen control Temperature range: -40°C to +180°C Rated voltage: 400V 3/N 50Hz Rated power: 10.4 kW Rated current: 17.2 A Compressor: TFH2516Z Pipe connection NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test specimen, without radiation and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900, Width 975, Depth 2200 mm External dimensions: Height 1950, Width 1290, Depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain, unpressurized, R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1m from the front) < 55 dB(A) Weight: approx. 1200 kg For your safety as a buyer, here is the following information! Lhodpfezg Twajx Abysl The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), CTS TSS-70/130 Temperature Shock Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Machine Type: Temperature Shock Testing Chamber / Temperature Testing Chamber Test Volume: approx. 130 liters Lhedpfx Abozf Ibksyol For sale is a used temperature shock testing chamber from the manufacturer CTS. The system is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, quality assurance, and research and development. Technical Data Hot Chamber: +50 °C to +200 °C Cold Chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Cycle time: < 10 seconds Temperature adjustment rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min Cooling rate: approx. 4 K/min Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K External dimensions approx.: 2335 x 940 x 1820 mm (W x D x H) Loading dimensions approx.: 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions approx.: 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight approx.: 950 kg Power connection: 400 V 3/N / 50 Hz Power consumption: approx. 16.6 kW Rated current: approx. 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant Pre-cooling Stage: R404A, 4.0 kg Refrigerant Cooling Stage: R23, 0.6 kg / 10 bar Operating overpressure PS: 25 bar Operating Requirements Water-cooled design Cooling water connection required Compressed air connection required Operation possible only with cooling water and compressed air Cooling water inlet: 3 - 6 bar Equipment CTS Control Panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Trolley with lead screw drive Test chamber / trolley made of stainless steel Insert basket made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Scope of Supply 1x CTS TSS-70/130 Temperature Shock Testing Chamber Insert basket / test chamber equipment Existing documentation / files Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The device can be switched on Scope of supply as shown in the pictures. Subject to changes and errors in the technical data, as well as prior sale.

Condition: excellent (used), CTS TS-70/200-5/S Temperature Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Ledpfx Abjzf Hi Heyjhl Type: TS-70/200-5/S Machine Type: Temperature Testing Chamber / Stress-Screening Testing Chamber Test Chamber Volume: approx. 200 liters For sale is a used temperature testing chamber from the manufacturer CTS. The testing chamber is suitable for temperature testing, stress screening, environmental simulation, material testing, quality assurance, as well as development and endurance tests. Technical Data Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 8 K/min Temperature Change Rate (Cooling): approx. 6 K/min Max. Heat Radiation at +20 °C: approx. 3500 W Test Chamber Dimensions (approx.): 650 x 400 x 750 mm (W x D x H) Housing Dimensions (approx.): 920 x 1345 x 1800 mm (W x D x H) Weight (approx.): 550 kg Power Connection: 400 V 3/N / 50 Hz Power Consumption: 10.9 kW Rated Current: 15.7 A Protection Class: IP22 Refrigerant, Pre-cooling Stage: R404A Refrigerant Quantity, Pre-cooling Stage: 2.5 kg Refrigerant, Cooling Stage: R23 Refrigerant Quantity, Cooling Stage: 0.6 kg / 15 bar Operating Pressure PS: 25 bar Test Pressure PT: 20 bar Equipment Touch panel operation Viewing window in the door Stainless steel interior Test chamber lighting Side openings as shown in the pictures Shelves / test chamber equipment as shown in the pictures Over-temperature test specimen protection Eurotherm safety controller RS232 interface Documentation / documents as shown in the pictures Areas of Application Temperature testing Stress screening Environmental simulation Material testing Electronics testing Quality assurance Research and development Scope of Delivery 1x CTS TS-70/200-5/S Temperature Testing Chamber Shelves / test chamber equipment Existing documentation / documents Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.

Condition: excellent (used), CTS TV-70/530 Climate Test Chamber Lhedpfxezd Uq Aj Abyjl Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TV-70/530 Machine type: Climate test chamber / Shaker chamber Test chamber volume: approx. 530 liters For sale is a used climate test chamber from CTS Clima Temperatur Systeme GmbH. The system was developed for combined temperature and vibration tests and is suitable for environmental simulation, material testing, electronics testing, quality assurance, as well as development and stress tests. Note: Shaker/vibration exciter is not included in the offer. Technical data Test chamber dimensions: approx. 850 x 730 x 860 mm (W x D x H) External dimensions: approx. 1450 x 2250 x 2000 mm (W x D x H) Weight: approx. 1,200 kg Temperature range: -70 °C to +180 °C Heating rate: approx. 5 K/min Cooling rate: approx. 5 K/min Refrigerant: R404A / R23 Rated power: 16 kW Rated current: 29.1 A Equipment Shaker chamber for combined tests Test chamber prepared for vibration applications Cascade refrigeration system Temperature testing Accessories as shown in the pictures Application areas Temperature testing Combined climate and vibration testing Environmental simulation Electronics testing Material testing Quality assurance Research and development Scope of supply 1x CTS TV-70/530 climate test chamber Scope of supply as shown in the pictures Condition Used Optical condition as shown in the pictures Shaker/vibration exciter is not included in the offer. Items, machines or other accessories shown in the pictures that are not explicitly described are not included in the scope of supply. Scope of supply as shown in the pictures. Subject to changes and errors in the technical data as well as prior sale.

Condition: excellent (used), CTS Climate Chamber, Climate Testing Cell Here we offer a CTS climate chamber, climate testing cell. Available from mid-January 2023! Water-cooled Height adjustable! Footprint approx. (W x D x H): 3755 x 3470 x 2480 Test chamber approx. (W x D x H): 2500 x 2720 x 2200 Lhodpszd R A Ujfx Abyol Test chamber volume: approx. 15 m³ Temperature range: -40°C to +140°C Temperature deviation 1 K over time Average temperature change rate without heat radiation, measured in the supply air Heating: 2 K/min Cooling: 1 K/min from +110 °C to -35 °C Climate tests: Temperature range: +10 °C to +90 °C Humidity range: +30% to +95% RH in the dew point range: +5°C to 89°C Temperature deviation 0.5 K over time Humidity deviation ±1 to ±3% RH over time Rated voltage: 400V 3/N, PE, 50 Hz Rated power: 53.5 KW Rated current: 92.3 A Compressor: S6J-16.2 + Chilled water unit Refrigerant: R404A Weight: 5500 kg Type: CW-40/16 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2011, condition: excellent (used), CTS Type: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control – 32-bit controller LCD control panel Digital display for set and actual values Numerical input of set values Ljdpfxozd Rzws Abyshl Error messages in plain text RS 232 interface Free switching channels for product-side test specimen activation Temperature Testing: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Thermal radiation: approx. 1000 W at +20°C approx. 200 W at -25°C Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate). The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch. O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air. Afterwards, the gas is returned to the test chamber via a second flame arrestor. The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix. The gas system is currently deactivated! All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10 %, 3/N, 50 Hz Nominal power: 21.6 kW Rated current: 36.5 A Protection class: IP 54 Condensate drain: non-pressurized, R 1/2" inner thread Sound pressure level:

Condition: excellent (used), CTS Climate Testing Chamber C-70/1000-S Device Data: Manufacturer: CTS GmbH Type: C-70/1000-S Design: Climate testing chamber / Environmental simulation chamber Cooling: Water-cooled Description: Used CTS climate testing chamber for precise temperature and climate testing. Suitable for material, component, and reliability testing. Used in industry, research, development, and quality assurance. Temperature and Climate Data: Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 2.5 K/min Temperature change rate (cooling): approx. 2.5 K/min Humidity range: 10 % to 98 % RH Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data: 400 V / 3/N / 50 Hz Power: 9.7 kW Current: 17.9 A Protection class: IP 22 Refrigeration System: Refrigerant: R404A / R23 Pre-cooling stage: R404A, 2.3 kg Cooling stage: R23, 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment: CTS control panel with LCD display Program operation Digital setpoint/actual value display Observation window in the door Stainless steel test chamber Test specimen protection / Temperature limiter Interior lighting Side cable entry points Entry points approx. 50 mm and approx. 125 mm RS232 interface according to documentation Digital outputs for test specimen control Mobile design on rollers Dimensions: Test chamber volume: approx. 1000 liters External (W x D x H): approx. 2245 x 1270 x 1950 mm Installation dimensions (W x D x H): approx. 2350 x 1290 x 2000 mm Weight: Test chamber: approx. 1000 kg Condenser: approx. 120 kg Documentation: Declaration of conformity Test certificates Operating manual Messages and digital channels Installation plan Quick start guide Humidity diagram Lhjdpey Iam Hofx Abysl Scope of supply: CTS Climate Testing Chamber C-70/1000-S Documentation, where available Scope of supply as shown in the images Functional test Refrigerant service Leak test Condition: Used. Condition, see images. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Type: TSS-70/350-A Year of Manufacture: 10/2017 Design: Temperature Shock Test Chamber Refrigeration Unit: Water-cooled Description Used temperature shock test chamber from CTS. Suitable for shock and cycle temperature tests. Application in industry, research, and quality assurance. Application Areas Material testing Aging tests Electronics and component tests Temperature shock tests Automotive and quality control Temperature Ranges Hot chamber: +50 °C to +220 °C Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Refrigeration System Pre-cooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Lhjdpfx Aboy H Hk Aeyel Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Equipment Touchscreen control Microprocessor control Program operation Setpoint/actual value display (digital) 2-zone system Mobile frame for quick changeover Viewing window Integrated control cabinet Cooling water connections Technical Design Separate hot and cold chambers Stainless steel test chamber Industrial design Dimensions Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Documentation Declaration of Conformity Test certificates Operating manual Wiring diagram and piping diagram Spare parts list Service before delivery (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Optical condition, see pictures. Scope of Delivery Test chamber TSS-70/350-A Documentation (if available) Inspection possible by arrangement. Loading and transport can be arranged on request. Subject to change and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), CTS Climate Test Chamber C-70/600 Type: C-70/600 Manufacturer: CTS Klima Temperatur Systeme Ledpfx Aoy I Tdxebyjhl Design: Air-cooled For sale is a CTS climate test chamber for temperature and climate testing in industry, research, development, and quality assurance. Condition / Display: Used unit, optical condition see pictures. Display in manual operation / stop. Temperature actual value: 16.59 °C Temperature setpoint: 5.00 °C Humidity actual value: 39.7 % RH Water supply: 11.0 l Special feature: Extended temperature range up to +210 °C (many standard versions only up to +180 °C) Technical data: Temperature range: -70 °C to +210 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Temperature change rate: approx. 2.5 K/min (heating/cooling) Test chamber volume: approx. 600 liters Electrical data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.0 kW Rated current: approx. 14.6 A Protection class: IP 22 Refrigeration system: Refrigerant: R452A / R23 Cascade refrigeration system for low temperatures down to -70 °C Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Test chamber: Internal dimensions: approx. 850 x 850 x 830 mm Dimensions: approx. 1900 x 1115 x 1850 mm Weight: approx. 800 kg (depending on equipment) Equipment: Observation window Stainless steel test chamber Digital setpoint/actual value display Test specimen protection / temperature limiter VE water connection Condensate drain Pipe penetrations RS232 interface Digital outputs for test specimen control Scope of supply: CTS Climate Test Chamber C-70/600 Scope of supply as shown in the pictures Service / Preparation: Functional check and replacement of necessary components Refilling with legally compliant refrigerant (if necessary) Leak test with certificate Documented test run Other: Inspection possible by arrangement Loading can be organized Commercial sale (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), CTS Climate Testing Chamber C-70/600 Device Data Manufacturer: CTS GmbH Type: C-70/600 Model: Climate Testing Chamber Cooling: Air-cooled Ledpfx Abey H H D Ajyohl Description Used climate testing chamber from CTS. Suitable for temperature and climate testing. Application in research, development, and quality assurance. Operating Status Display: Manual operation / Stop. Temperature: 16.59 °C (Actual) / 5.00 °C (Set). Humidity: 39.7 % RH. Water supply: 11.0 l. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection class: IP 22 Refrigeration System Refrigerant: R404A / R23 Cascade refrigeration system Low-temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber Digital setpoint/actual value display Test item protection / Temperature limiter Water connection (demineralized water) Condensate drain Pipe penetrations RS232 interface Digital outputs Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1115 x 1850 mm Weight approx. 600 kg Scope of Delivery CTS Climate Testing Chamber C-70/600 Documentation (if available) Functional Test Refrigerant service Leak test Test run with protocol Condition Used. Condition as shown in the pictures. Inspection possible by appointment. Loading and transport can be organized upon request. Subject to change and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), CTS Climate Testing Chamber C-70/600 Device Data Manufacturer: CTS GmbH Type: C-70/600 Design: Climate testing chamber Cooling: Air-cooled Description Used climate testing chamber from CTS. Suitable for temperature and climate tests. Used in industry, research, and quality assurance. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection class: IP 22 Refrigeration System Refrigerant: R404A / R23 Cascade refrigeration system Low-temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Equipment Ledpfxjy H Hl Ho Abyehl Observation window Stainless steel test chamber Digital setpoint/actual value display Test item protection / Temperature limiter Water connection (demineralized water) Condensate drain Pipe penetrations RS232 interface Digital outputs Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1115 x 1850 mm Weight approx. 600 kg Scope of Delivery CTS Climate Testing Chamber C-70/600 Documentation (if available) Service prior to delivery (optional) Functional test Refrigerant service Leakage test Test run with protocol Condition Used. Visual condition, see pictures. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: new, customizable design Lsdpfez Dbiiex Abyohl

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, Technical Specifications Year of manufacture: 2007 Cutting rate: 350 cuts per minute (with a single-blade knife) Magazine (height x width): 160x264mm Cutting thickness: 1-30mm Power: 6 kW Lodjzkm R Iopfx Abyohl Weight: 950 kg Dimensions (length x width x height): 3380mm x 1100mm x 1500mm The machine has undergone a major overhaul and is ready for operation (new bearings and seals on the main gearbox). High-performance HOLAC Sect 28 CT slicer with loading and unloading conveyors. Capable of slicing fresh, frozen, and bone-in meat! – Continuous product loading thanks to the loading belt and pressure belts! – Various belt speeds and product thicknesses – Possible separation of cut pieces – Option for grouping cut pieces – Quick and easy disassembly for cleaning – easy to maintain hygiene – Option to use a double-blade knife to increase efficiency

Condition: used, Year of construction: 2016, operating hours: 1,015 h, If you are interested, please call or send a message via WhatsApp, Telegram, or Viber. Lhedpjz Effwjfx Abysl

Condition: used, Year of construction: 2007, operating hours: 2,000 h, power: 283 kW (384.77 HP), Equipment: air conditioning, cabin, * Engine manufacturer: John Deere Lsdpfoil Hadjx Abyshl Equipment: Air conditioning, straw chopper, cutterbar carriage, hillside compensation, onboard computer/monitor, throughput control, yield measurement, reel horizontal adjustment, hydrostatic drive, reversing device, cutterbar, loss measurement Shaker with JD625R cutterbar with a working width of 7.60m, transport trailer, and rape seed table ENGINE IS MAKING NOISE.

Condition: good (used), Year of construction: 2000, For sale is a used carton sealing machine (tape sealer) from Cyklop. The machine is ideal for automatically sealing cartons with adhesive tape (top & bottom) and can be easily integrated into existing packaging lines. Typical applications: * Shipping / Logistics * Warehousing & Fulfillment * Production / Packaging lines ⸻ ⚙️ Technical Information * Suitable for tape width approx. 50 mm * Carton size adjustable (width & height) * Integrated conveyor belt * Robust industrial-grade construction * Suitable for continuous operation 👉 Comparable models operate at approx. 20–23 m/min conveyor speed in newer versions Lhjdey Hf Sljpfx Abysl ⸻ 📦 Condition * Used, reflecting its age * Visual condition as shown in photos * Function: (insert here: running / untested / tested) ⸻ 📐 Advantages ✔ Fast and clean carton sealing ✔ Time savings compared to manual work ✔ Ideal for medium to high volumes ✔ Proven industrial quality by Cyklop

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, overall weight: 600 kg, plate width: 60 mm, plate length: 80 mm, resolution (max.): 2,540 dpi, TECHNICAL DETAILS Exposure method: Direct laser exposure (computer-to-screen) Resolution: up to 2,540 dpi Maximum screen size: 600 × 800 mm Suitable for: common CTS emulsions Plate width: 60 mm Plate length: 80 mm MACHINE DETAILS Input voltage: 240 V Dimensions & Weight Dimensions (L x W x H): 1,670 x 820 x 930 mm Total weight: 600 kg EQUIPMENT Computer Keyboard Monitor Mouse Machine software with configuration and adjustment options Ledpfxozy Inte Abyshl Accessories and maintenance tools

Condition: new, Type: Operator Interface P Brand: Krones B&R Lsdpfx Aoh Rulpebyohl

Condition: used, functionality: fully functional, fuel type: diesel, color: yellow, operation weight: 2,927 kg, Year of construction: 2026, operating hours: 300 h, Equipment: additional headlights, air conditioning, cabin, rubber tracks, JCB 8029 CTS Year 2021, 300 operating hours, operating weight 2,927 kg. Compact mini excavator with enclosed cab, equipped with air conditioning and heating, joystick controls, rubber tracks. Front leveling blade, quick coupler, auxiliary lines for hydraulic breaker, 1 tilting ditch-cleaning bucket with hydraulic cylinder, 2 digging buckets. PERKINS engine, 24 hp. MASON TRUCKS Lhsdpfeyy U Sbox Abyol Via Vicenza, 31 Vedelago (Treviso)

Condition: excellent (used), LDS / CTS Vibration Testing System Type: V850-440 LPT 750C + CTS CV-70/1100-5 Manufacturer: LDS / CTS / IMV For sale is a complete electrodynamic vibration testing system consisting of an LDS shaker system, an LDS SPA30KCE power amplifier, an IMV K2+ vibration controller, and a CTS climate chamber. Ledpfxey Sy Npe Abyjhl Suitable for combined vibration and climate testing in the automotive, aerospace, electronics testing, research & development, material testing, and industrial quality assurance fields. The blue hall crane / portal crane visible in the pictures is not included in the scope of supply. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: V850-440 LPT 750C Air-cooled electrodynamic vibrator. Armature diameter: 440 mm Frequency range: DC – 3000 Hz Resonant frequency: approx. 2200 Hz Sine force: approx. 22.2 kN peak Random force: approx. 22.2 kN RMS Shock force: approx. 66.7 kN peak Max. velocity: 2.0 m/s Displacement: 50.8 mm pk-pk Internal load capacity: approx. 350 kg Compressed air supply required: Load support: approx. 5.5 bar Air isolation: approx. 6.9 bar Shaker weight: approx. 1,300 kg Power Amplifier Manufacturer: LDS Type: SPA30KCE Class-D high-performance switching amplifier. Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 / 520 V Current setting: 400 V Max. input power: 38.14 kVA Max. output power: 21.0 kW Output voltage: 100 V RMS Amplifier weight: approx. 550 kg Controller IMV K2+ Vibration Control System Multi-channel vibration controller including Dell Precision PC system. Functions: Sine Resonance dwell Limit control Random Sine-on-random PSD limit control Shock Scheduler System monitor CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: CV-70/1100-5 Year of manufacture: 10/2019 Temperature range: -70 °C to +180 °C Humidity range: 10 % to 95 % RH Rated voltage: 400 V / 3/N / 50 Hz Power: 15.9 kW Refrigerant: R452A: 6.8 kg R23: 2.1 kg Equipment Combined climate and vibration testing Slip table / Fixturing table included Completely wired testing system Service and maintenance documentation available Slip table: Mounting area: approx. 760 x 850 mm Threaded insert spacing: approx. 100 mm Dimensions / Weight Large industrial system / heavy-duty system. Total system weight: approx. 6,000 – 7,000 kg Transport exclusively via a suitable heavy-duty transport company. Dimensions, weights and technical data are partially estimated or not completely known. Condition Used industrial system from industrial use. Optical condition, see pictures. Inspection and testing on site possible by arrangement. Scope of supply LDS V850-440 LPT 750C shaker system LDS SPA30KCE power amplifier IMV K2+ vibration controller Dell Precision PC system CTS climate chamber CV-70/1100-5 Slip table / Fixturing table Accessories and documentation as shown in the pictures Not included in the scope of supply: Blue hall crane / portal crane. Loading possible by arrangement. Commercial sale without warranty. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Glass tempering machine for thicknesses from 3.8 to 19 mm. Maximum glass dimensions: 2440 x 4500 mm. Ljdpfx Absx Trg Aeyohl

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 50 h, functionality: fully functional, DROP AG is selling a demonstration machine from its demo center: a digital laser exposure system, Phoenix 1213V CtS, with a maximum screen size of 1200 x 1300 mm. 2540 dpi with PDF vector option – 12700 DPI. 30-watt laser with 405 nm laser. 4° DMD technology with TILT software. Lsdpfxjw T Sfko Abyehl Inline option; the system can also be loaded manually. Suitable for screens with a frame thickness of up to 60 mm.

Condition: excellent (used), Year of construction: 1997, turning diameter over bed slide: 1,240 mm, turning diameter over top slide: 980 mm, turning length: 3,000 mm, DBC Turning Length: 3000mm Swing over bed Ø: 1240mm Swing over cross slide Ø:980mm Swing in the gap Ø: 1980mm Lhodpex Di Rqjfx Abyjl Gap length: 1500mm Spindle bore: 130mm Spindle power: 30kW Bed width: 500mm Stroke pinole: 300mm Spindle taper: 5Mk Speeds / ranges: 800Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Workpiece load: 4000 Length: 7000mm Width: 2200mm Height: 2300mm Weight: 12400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!