Used Ctx Beta 500 for sale (15,736)

Condition: used, tank capacity: 500 l, GENERAL Equipment: Ball valve Design: Container Remarks: Frame, Fe (painted), ball valves glued Total width: 1,230 mm Total height: 1,150 mm Total length: 1,030 mm Location: Bremen Nameplate: Volume: 500 litres Material in contact with product: V2A 1.4301 (AISI304) Condition: used Previous application: adhesive industry Pgsdeyclqxepfx Aa Djg TANK Stand type: Frame EQUIPMENT Manhole / Dome: in top head (DN 400) Outlet: 75 mm Note: signs of use

Condition: used, tank capacity: 500 l, GENERAL Equipment: Drain valve Design: Container Remarks: Frame made of Fe (galvanized); various manufacturers; manhole cover with dip tubes Overall width: 1,200 mm Overall height: 1,170 mm Overall length: 1,000 mm Location: Bremen Nameplate: Volume: 500 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: chemicals TANK Footing: frame EQUIPMENT Podpfx Ajyclpuea Djgg Manhole / dome: in top head Outlet: available Note: Signs of use

Condition: used, tank capacity: 500 l, GENERAL INFORMATION Equipment: ball valve Design: container Notes: Frame made of Fe (galvanized; slight onset of corrosion, partially slightly bent); minor dents possible; partially light residual adherence inside containers Overall width: 1,030 mm Overall height: 1,300 mm Pjdjycliuepfx Aa Dsgg Overall length: 830 mm Location: 68 x Bremen, 106 x external warehouse Nameplate: Volume: 500 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last intended use: paints (chemicals) TANK Mounting type: frame EQUIPMENT Manway / dome: on top (DN 400) Outlet: 45 mm Note: signs of use

Condition: used, tank capacity: 500 l, GENERAL Design: Container Remarks: Frame Fe (galvanised) Overall width: 1,200 mm Overall height: 1,080 mm Overall length: 1,000 mm Location: Bremen Nameplate: Volume: 500 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: paints / varnishes TANK Pjdpfx Aoyck Tlsa Degg Support type: frame EQUIPMENT Manhole / dome: in top plate (Ø 450) Outlet: 75 mm Note: signs of use

Condition: used, tank capacity: 500 l, GENERAL Equipment: Disc valve Design: Vertical Remarks: Container slightly out of round; parts of the disc valve are lower than the bottom surface (take this into account when positioning the container); outlet slightly bent upwards; tank has dents at the cylinder/bottom transition (see photos) Pgjdpfx Aasyckrbo Djg Internal diameter: 800 mm Total height: 1,070 mm Top cover: open Location: Bremen Nameplate: Volume: 500 liters Cylinder wall thickness: 2.0 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,000 mm Previous use: paint industry CONTAINER Bottom: Flat bottom EQUIPMENT Outlet: 48 mm Note: slight residues TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 2.5 mm

Condition: used, tank capacity: 500 l, GENERAL Design: upright Notes: Slight differences in the design of the containers; Containers slightly out-of-round and with minor dents; Containers have no bottom outlet; Some feet are slightly bent; One of the lids has a round sheet metal cutout (see photos) Inner diameter: 840 mm Total height: 1,250 mm Top cover: open with loose lid Location: Bremen Volume: 500 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 910 mm Previous use: cosmetics (cream) CONTAINER Bottom: flat bottom Support type: feet Number of feet: 4 pcs EQUIPMENT Outlet: not available Pgsdpsycknvjfx Aa Dog MATERIAL SPECIFICATION Feet material: stainless steel

Condition: used, tank capacity: 500 l, GENERAL Equipment: Butterfly valve Design: Container Remarks: Base frame, Fe (galvanised; each with a bolted plastic plate at the bottom; see photos); manhole cover without fastening screws; centrally with 1 connection DN 100 DIN 11851 (see photos); on one container, the nameplate is missing (on this container, two forklift pockets are also slightly bent) Total width: 1,030 mm Total height: 1,280 mm Total length: 850 mm Location: Bremen Nameplate: Volume: 500 litres Product-contacting material: V2A 1.4301 (AISI 304) Condition: used Last intended use: food TANK Footing type: Frame EQUIPMENT Podsyckmxjpfx Aa Dogg Manhole / Dome: in top head (DN 400) Outlet: DN50 DIN 11851 Note: Signs of use

Condition: used, tank capacity: 500 l, GENERAL Design: horizontal Remarks: Handhole diameter: approx. 140 mm with sight glass; Speed: 700 RPM Inner diameter: 796 mm Total width: 800 mm Total height: 1,570 mm Total length: 1,600 mm Power: 0.55 kW Pgsdpfxeyckmls Aa Dog Agitator: propeller type Location: Bremen Volume: 500 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used TANK Stand type: mobile on castors EQUIPMENT Manhole / dome: handhole Outlet: DN25 DIN 11851 AGITATOR Voltage: 380 Volt Agitator arrangement: on the tank

Condition: used, tank capacity: 500 l, GENERAL Design: upright Remarks: Multiple tubes inside the tank; loose flanges made of Fe (galvanized) Internal diameter: 900 mm Total height: 1,850 mm Location: Bremen Nameplate: Volume: 500 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 740 mm Last previous use: biochemistry Podpfxjycixmj Aa Dogg TANK Support type: Height-adjustable legs Number of legs: 3 pcs EQUIPMENT Manhole / access cover: in top head (Ø 430) Outlet: 55 mm MATERIAL CHARACTERISTICS Legs material: Stainless steel

Condition: new, Year of construction: 2025, For crushing marble, sandstone, and quartzite, various types of crushers can be used depending on the properties of the raw materials and the desired final product specifications. Here are some common types of crushers that may be suitable for processing these materials: Pgsdpfx Aajq Nx Nnj Dsg 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing. They are robust machines that handle tough materials, making them suitable for breaking down hard and abrasive stones like marble and quartzite. 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder stones and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials like sandstone. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Crawler Mobile Crusher: - Mobile crushers offer flexibility and mobility, allowing them to be used directly at the quarry or job site. Crawler mobile crushers can handle various types of stones, including marble, sandstone, and quartzite. 9. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 10. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. When selecting a crusher for marble, sandstone, or quartzite, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: used, Year of construction: 1995, Surface grinding machine Manufacturer: Jung Model: JA 500 CNC-C Year of manufacture: 1995 Overhauled in: 2003 Grinding length: 500 mm Grinding width: 200 mm Max. workpiece height: 250 mm Table size X/Y: 600 mm / 200 mm Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Pedpfx Aaowp E Rge Dsgg Speed: 4,200 rpm Machine weight: approx. 2,500 kg

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Machine come without automatic line. Marked equipement with red not come.. Some accesories and machine equipement are also available. Podsxf Iamepfx Aa Dsgg More specs of the machine, check last two pictures.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 150700149, Perfect binder in excellent condition Pgsdsyalvvopfx Aa Dsg

Condition: excellent (used), Year of construction: 2007, clamping force: 5,000 kN, screw diameter: 85 mm, displacement volume: 2,128 cm³, injection pressure: 1,574 bar, injection weight: 1,937 g, mold height (min.): 450 mm, Battenfeld HM 500/3400 Injection Moulding Machine Clamping force: 500 t Year of manufacture: 2007 Shot weight: 1937 g Injection unit .../3400 Screw diameter: 85 mm Specific injection pressure: 1574 bar Injection volume: 2128 ccm Pgedpfx Aeyfpyvoa Dog Shot weight: 1937 g Screw L/D ratio: 22 Clamping system 500/… Clamping force: 500 t Platen dimensions: 1590 x 1470 mm Tie bar spacing: 1000 x 800 mm Mould height: 450 mm Opening stroke: 1150 mm Max platen distance: 1600 mm Ejector stroke: 250 mm General data: Weight: 25,000 kg Dimensions (L x W x H) [m]: 7.3 x 2.5 x 2.6 Equipment: - 1 x pneumatic valve - 2 x hydraulic core pulls - euromap 67 interface - bimetallic injection system

Condition: used, Year of construction: 1991, pressure 500 t distance between columns 1910 mm stroke 500 mm Distance table/ram, max. stroke up, adjustment up 700 mm table surfache without cutting impact cushions 1910 x 1360 mm table surfache with cutting impact cushions 1600 x 1360 mm table height over floor 800 mm ram surface 1600 x 1270 mm Side window 600 mm speed down 400 mm/s speed up 330 mm/s working speed 10 - 28 mm/s oil volume 1200 l power requirement 60,0 kW weight 40,0 t Dimensions (WxDxH) 3,6 x 2,5 x 5,0 m height over floor 4,5 m Podpfx Aevuuiqea Djgg permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, cutting impact cushioning, two-hand operation table size depending on cutting impact devices: - without approx. 1910 x 1360 mm - with approx. 1600 x 1360 mm can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1973, pressure 500 t Pgedpfxsvuk Eus Aa Dsg distance between columns 1620 mm stroke 40 - 160 mm no. of strokes 32 / 48 Hub/min dayligth (stroke and adjustment up) 660 mm column travel -side 400 x 430 mm table surface area 1600 x 1300 mm table height over floor 750 mm ram surface 1400 x 1200 mm power requirement 44,0 / 66,0 kW weight of the machine ca. 56,00 t required space 3,55 x 2,55 x 5,1 m with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation Video of 'sister maschine' available

Condition: used, mileage: 6,37,097 km, power: 375 kW (509.86 HP), first registration: 09/2020, fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Fahrzeugausstattung* 2 Betten * 2x Tank * ABS * ASR * Automatik * Seitenspoiler * Zentralverriegelung * CD * elektrische Fensterheber * Wegfahrsperre * Klimaanlage * hohe Kabine * Scheibenbremsen * Kühlschrank * Zwischenachsspoiler * Nebelscheinwerfer * unabhängige Klimaanlage * unabhängige Heizung * Bordrechner * Zusatzscheinwerfer * Radio * Satellitennavigation Pgsdpjydulhefx Aa Deg * Sonnenblende * Dachfenster * Dachspoiler * Tempomat * getönte Scheiben * Achsentlüftung * Bremskraftverstärker * Sitzheizung * beheizbare Spiegel

Condition: used, Year of construction: 1996, material width 500 mm coil weight 2,5 t material thickness 0,2 - 3,0 mm coil internal diameter 480 - 530 mm coil external diameter 1300 mm material cross-cut 1000 mm² Psdpfjvut Raex Aa Djgg no. of straightening rolls 10 straightening roll diameter 80 mm number of draw-in rolls 2 roll diameter 120 mm speed 20 m/min power requirement 4,0 + 1,1 kW weight of straightening machine 2,3 t dimensions straightener (WxDxH) 1,4 x 2,2 x 2,0 mm weight of decoiler 0,95 t dimensions decoiler (WxDxH) 1,5 x 1,5 x 1,95 mm Straightening machine BRMS 4/500/10 with infinitely variable drive Decoiler BSH 3-500 with main motor for fix speed, ausiliary drive (declutchable), pneumatic snubber roll coil loop control via light guard can be offered without putting into operation or with putting into operation in given condition video at seller's site before dismantling available

Condition: used, Year of construction: 1994, material width 500 mm coil weight 3,0 t material thickness 0,2 - 2,5 mm coil internal diameter 470 - 530 mm coil external diameter 1400 mm no. of straightening rolls 9 straightening roll diameter 40 mm number of inlet and outlet rolls 4 material cross-cut 1200 mm² speed 1,5 - 30 m/min dimensions decoiler (WxDxH) 1,9 x 0,6 x 1,7 m weight decoiler 1,1 t dimensions straightener (WxDxH) 3,3 x 1,3 x 2,7 m weight straightener 3,0 t Pgsdpfx Ajvut Eqsa Djg - Straightening machine RYD 40 x 500 with infinitely variable drive (driven lower straightening rolls), straightening rolls individually adjustable by motor, supporting rolls, outlet roller basket - Decoiler DY 500 x 3000 with hydraulic auxiliary drive, pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, hydraulic insertion aid, hydraulic coil lifting device - coil loop control can be offered without or with putting into operation in given condition

Condition: used, Year of construction: 2006, Dimensions (LxBxH): 217 x 460 x 183 cm Price: On request - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 107402 - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Spindle diameter [mm]: 40 - └ Spindle 2: - - Spindle diameter [mm]: 40 - └ Spindle 3: - - Spindle diameter [mm]: 40 - └ Spindle 4: - - Spindle diameter [mm]: 40 - Feed table length [mm]: 1780 - Feed motor [kW]: 5.2 - Diameter extraction nozzle [mm]: 140 - Voltage [V]: 400 - Transport dimensions: 2170mm x 4600mm x 1830mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Pgedpownig Njfx Aa Dog

Condition: used, Year of construction: 2011, machine/vehicle number: IntNr231315, Technical Data – used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2011 Airflow rate approx. 500 m³/h Motor power approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W×D×H) Filter stages 1. Pre-filter F5 2. Centrifugal separator Pgedsyapruspfx Aa Dsg 3. Post-filter F5 (optional HEPA H13) Filtration efficiency 99% at ≥ 1–2 µm (F9), optionally HEPA 99.95% at ≥ 0.1 µm Noise level approx. 65 dB (WS2 mod. similar) Accessories & Features • Compact design for direct installation on or beside CNC machines • Stand for extraction • Three-stage cleaning for effective oil and coolant mist separation • Cartridge filter can be retrofitted with HEPA kit • Easy maintenance, low noise operation, and long-life filter elements Subject to technical changes, errors and prior sale!

Condition: excellent (used), Weinig Unimat 500 four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Spindle arrangement: 1.Bottom 7.5kw 2.Right 7.5kw 3.Left 7.5kw 4.Top 11kw 5.Top 11kw 6.Bottom 7.kw Total power 56kw Feed speed adjustable on inverter Memory system Pneumatic pressure divided into 3 sections 4 rows of metal material feed rollers 2 rows of rubber drawing rollers 1 roller in the tabletop driven by a cardan shaft Length of input table top 1980mm Worktops made with Marathon Coating technology CE certificate Extraction stubs 6x140mm Machine dimensions 394x185x195cmH Pgjdsthk T Iepfx Aa Djg

Condition: good (used), Year of construction: 1985, Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Steel, electric chain hoist with chassis -Chain hoist: Type T 302 L, load capacity 500 kg -Main stroke: 4 m/min -Fine stroke: 1 m/min -Hook path: 5 m -Crane chassis: Maximum beam width 135 mm -Dimensions: see photo and technical drawing Psdeya Aiyopfx Aa Djgg -Transport dimensions: 600/550/H420 mm -Weight: 49 kg

Condition: excellent (used), mileage: 66,596 km, power: 41.92 kW (57.00 HP), first registration: 01/1996, overall weight: 4,200 kg, maximum load weight: 1,800 kg, empty load weight: 2,400 kg, • Manufacturer: Kramer • Model: TSK500 • First registration: 01/1996 • Kilometers: 66,596km • Unladen weight: 2,400kg • Payload: 1,800kg • Perm. total weight: 4,200kg • Power: 42kw/57HP • Sweeping machine • Minor electrical problem • Leaf blower • Multicar • Winter service • German vehicle • German documents • Ready for immediate use You also can have the description in another language by email • Our service: • • - Export declaration - customs registration - yellow temporary plates - red customs plates. • - Purchase of your used construction machine or commercial vehicle Pjdpfx Aeumxuqsa Djgg • - We help you with financing • - We offer you transport solutions • - Inspection and demonstration of the machines Mon-Fri 9:00 - 17:00 (Saturday by appointment only.) • • Our machine pool is constantly changing and always up to date on our website • This offer is non-binding and subject to prior sale. - Subject to prior sale, - Errors and/or typing mistakes not excluded. - Sale according to our Terms & Conditions.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 620 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC-530, This 5-axis POSmill H 500 U was manufactured in 2018, featuring a vertical machining center with X-620, Y-820, Z-650 travel dimensions, and a 60-space workshop. It includes internal coolant supply plus air cooling and is equipped with a Heidenhain iTNC-530 control for five-axis simultaneous milling. If you are looking to get high-quality milling capabilities consider the POSmill H 500 U machine we have for sale. Contact us for more information about this machine. Podpfx Aasx D Niao Dsgg Additional equipment • Optional chucks and approx. 260 HSK63 holders with rack • CAD-CAM Hypermill OPEN MIND license for 5-axis simultaneous milling not inckluded but for sale • Note: The Y-axis is louder than it should be. We recommend replacing the bearings for the Y-axis. However, the machine is running and is still in production. Machine Benefits Technical Machine Benefits • Workshop 60-space / internal cooling / internal coolant supply plus air cooling Extra Information Milling spindle S = 18,000 rpm, HSK-A 63 Heidenhain - Linear measuring system X, Y, Z/ Air purge for all linear measuring systems/ Active air-to-air control cabinet cooler/ Active cooling for the 4th and 5th axes, controlled Network connection + USB connection/ Spindle cooler, controlled/ Heidenhain iTNC 530 control panel, right-hand side/ Heidenhain rotation measuring system/ POS kinematic module including reference ball/ POS contour lock/ Automatically controlled crane loading hatch External hinged chip conveyor/ Coolant pump on the head via M functions Pump for chip flushing device/ Chip flushing device/ Water gun/ Operating status indicator Air at the spindle/ Electromechanical oil/coolant separator/ Automatic coolant level monitoring/ 3-way media connection in the Table center/ Hydraulic power unit including M-function control Mobile electronic handwheel/ Variants included in the special price/ Through-spindle air/ 60-station HSK-A 63 tool changer/ Internal coolant supply 20 bar with belt filter unit/ Kessler table diameter 500 mm/ Preparation for workpiece measurement/ Infrared workpiece measurement - 3D probe Tool measurement via BLUM laser/ Rotating viewing window/ POS DCM collision module