Used Ctx Beta 800 Tc for sale (10,402)

Condition: used, Heavy-duty, 800 mm thick, 4-knife rollers in the table. Gisdpfxezlub Do Ap Ajw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1700x900x1350 mm Weight 300 kg Total power requirement 1,6 kw Godpevz E Idjfx Ap Aoiw

Condition: like new (used), Drills grinder LA PRORA model Beta a.p. 45 for drills diameter 5 to 45 mm Gedpfoivt Rxsx Ap Aoiw

Condition: used, Year of construction: 2001, Demag ergotech concept 800/420-310 (2001) Giedpfx Apsyyzqws Aew

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, total length: 1,300 mm, total height: 2,000 mm, table width: 255 mm, input voltage: 400 V, total width: 1,350 mm, table length: 800 mm, drilling capacity: 40 mm, Equipment: documentation/manual, SERRMAC TCS 40 TC VR DA Drilling and Milling Machine Square column and prismatic guides. Complete with: Automatic feed. Variable speed with delay. Tapping system via reversing gearbox. Lubrication system. Giodpfx Aezkkm Hsp Aow Motorized rapid vertical feed for table and cross slide. Vice. Drilling in steel, diameter 40 mm. Tapping M26. CM 4 spindle connection. Spindle travel 145 mm. Cross slide table 800 x 255 mm. Variable speed with delay 64-2350 rpm. Motor 2.2 kW. Three-phase power supply 400 V. Weight 780 kg.

Year of construction: 1980, condition: used, For sale: a KENSA MASKIN SA 800 automatic coil unwinding unit, designed for narrow strip, steel coil, and wire. The unit is used and features a robust industrial design. It is powered by an electric motor and designed for the automatic feeding of material into a production line. Giedezg Tdmspfx Ap Asw It is ideally suited for profiling, stamping, rolling, wire processing, and other automated production lines. Technical specifications: Manufacturer: Kensa Maskin Model: SA 800 Year of manufacture: 1980 Drive: Electric Maximum coil weight: 500 kg Maximum coil outer diameter: 800 mm Minimum coil inner diameter: approximately 400 mm Maximum coil width: 500–800 mm (depending on the configuration) Automatic material feed Robust industrial design If you have any further questions, we will be happy to answer them.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 861 0250, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,090 g, total length: 9,000 mm, total width: 4,000 mm, total height: 4,000 mm, overall weight: 20,000 kg, input frequency: 50 Hz, input current: 165 A, controller model: ERGOCONTROL, DEMAG ERGOTECH 420/800-2003 SYSTEM injection molding machine - Operating voltage: 3 x 400 V - Metering stroke: max. 315 mm - Nozzle stroke: max. 620 mm - Nozzle immersion depth: 45 mm - Includes the manufacturer DEMAG's loading system with a gripper robot and a conveyor belt - Conveyor belt length: 4000 mm - Conveyor belt width: 640 mm - Also includes various spare parts Gsdpfx Apozlfd No Ajiw Please note: The item must be picked up between September 8th and 10th, 2026, on a date to be determined. FCA D-63128 Dietzenbach - loaded onto a truck.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 40,767 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 570 mm, total height: 1,800 mm, total width: 1,350 mm, overall weight: 2,500 kg, bar diameter (max.): 52 mm, controller manufacturer: SIEMENS, product length (max.): 2,100 mm, workpiece diameter (max.): 280 mm, number of slots in tool magazine: 12, number of axes: 3, This 3-axis SPINNER TC 52 MC was manufactured in 2007. It features a robust design with optional equipment including a bar feeder, parts catcher, and a turret with driven tools. The machine is equipped with a collet chuck for clamping and a dust extraction system for efficient operation. If you are looking to get high-quality turning capabilities, consider the SPINNER TC 52 MC horizontal turning machine we have for sale. Contact us for further details. • Number of Live Tools: 12 • Live Tool Speed: 6,000 rpm • Live Tool Torque: 23.5 Nm • Rapid Traverse X/Z: 15 / 24 m/min • Maximum Turning Diameter: 280 mm • Maximum Swing Diameter: 400 mm • Distance Between Centers: approx. 550 mm • Main Spindle Nose: A6 • Bar Capacity: 52 mm • Main Spindle Torque: 92 Nm • Coolant Tank Capacity: approx. 85 l • Coolant Pressure: 8 bar • Supply Voltage: 3/PE ~ 400 V • Collet Chuck Used for Clamping • Dust Extraction System • Supply Voltage: 3/PE ~ 400 V • Frequency: 50 / 60 Hz • Operating Current (IB): 34 A • Rated Current (IN): 35 A • A collet chuck used for clamping • Turret with driven tools Optional equipment: • Bar feeder • Parts catcher Gedpfezlq I Tjx Ap Aeiw • Chip conveyor • Tailstock Technical Specification Counter Spindle No Driven Tools Yes Taper Size VDI 30

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,701 h, clamping force: 800 kN, Vertical injection moulding machine manufactured in 1998. This Arburg 1200 TS 800-60-350 features a clamping force of 800 kN and includes two injection units: a vertical unit with a Ø22 mm screw and a horizontal unit with a Ø35 mm screw. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 1200 TS 800-60-350 machine we have for sale. Contact us for further details. • Clamping Force: 800 kN • Number of Injection Units: 2 Gjdpfozlqtcsx Ap Ajiw • Injection Unit 1: Vertical, Ø22 mm screw • Injection Unit 2: Horizontal, Ø35 mm screw • Operating Voltage: 400 V • Phase: 3~ • Frequency: 50 Hz • Connected Load: 55.9 kW • Rated Current: 93 A • Control Voltage: 24 V DC • Protection Class: IP54 • Hydraulic Pressure: 210 bar • Rotary Table: Yes • Safety Enclosure: Yes • Pump Operating Hours: 35,290 h • Automatic Operating Hours: 28,701 h

Condition: used, Altarfalztaschen (Fensterfalztaschen) / Gateway Buckles MBO 76 - 79 - 530 - 800XX124 - Altarfalztaschen (Fensterfalztaschen) mit Steuerung / Gateway Buckles with Control box for MBO KT76 XX047 - Altarfalztaschen (Fensterfalztaschen) mit Steuerung / Gate Giedpjrgbzwjfx Ap Aew Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2004, machine/vehicle number: 15005225, Automatischer Banderolierautomat - Automatic Banding Machine HIMA BA 30/800Baujahr / Year 10/2004 - Serial-No. 15005.225 Beschichtetes Kraftpapier bzw. Kunststoff-Folie Coated paper or plastic filmTechnical specifications: Leistung / Output: up to 23 Takte/min / cycles/min. Produktbreite / Width of banded product: 30 - 310mm Produkthöhe /Stack height: 3 - 200mm Bandbreite / band width 30mmTaktauslösung /Triggering of cycle: – von Hand/Starttaster / manual/start button – über Fußschalter / foot actuator – über Automatiktaster / automatic mode button Online-Video-Inspection by Skype-Video Godsn Aw Ucopfx Ap Aoiw We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 01160007521, turning length: 635 mm, turning diameter: 220 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,700 mm, total length: 3,200 mm, total width: 1,700 mm, overall weight: 4,000 kg, controller manufacturer: GRUNDIG, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, nominal power (apparent): 44 kVA, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, GILDEMEISTER CTX 400 S 2 CNC lathe - Swing diameter over the bed way cover: 570 mm - Swing diameter over the facing slide cover: 420 mm - Facing slide travel: 220 mm - Longitudinal travel: 635 mm - Includes a 12-position tool turret with 6 driven tool stations - Tailstock - Tailstock diameter in the front area: 80 mm - Tailstock travel: 550 mm - Tailstock mounting: MK 4 Note: The item must be collected between October 7th and October 14th, 2026, on a date to be agreed upon. Giedjzlg A Hopfx Ap Ajw FCA D-35576 Wetzlar - loaded onto a truck.

Condition: used, Year of construction: 2003, CNC lathe Gildemeister CTX 400 Series 2 with – FANUC i 21 control and Sauter turret with 12 stations, 6 of which have powered tools. The machine is immediately ready for use, is still connected to power and can be inspected. FANUC control 6 powered tool stations Tool measuring arm Extensive accessory package Technical data: Year of manufacture: 2003 Spindle speed: 25 – 5,000 rpm Turning diameter over bed: 570 mm Turning diameter over cross slide: 420 mm Travel X/Z: 220 / 635 mm Spindle bore: approx. 65 mm Main spindle: 21 kW Torque: 240 Nm ⚙️ Equipment: Hydraulic 3-jaw chuck Ø 250 mm (incl. interchangeable jaws, soft and hard) Disc turret, 12-fold VDI 30 Tailstock (550 mm travel, MK4) Coolant system Gijdpfx Aezlhf Aop Aow Chip conveyor Accessories included: Various tool holders (also powered) Documentation Dimensions & Weight: approx. 3250 x 1750 x 2300 mm Weight: approx. 5,300 kg

Condition: new, Year of construction: 2024, Special offer price: €42,500 (instead of €48,500), excluding VAT. Available immediately! Included premium features: - Heidenhain ND5023 3-axis position display - 5-position longitudinal stop for the carriage - SRW-Amestra Multifix C quick-change tool holder with 4 inserts - LED work area lighting - Set of leveling pads from Spinelli Standard features: - Double mechanical clutch - Electromagnetic brake - Rapid traverse gears - Air supply to the tailstock to facilitate movement along the bed - Bed, legs, headstock, tailstock and carriage made of cast iron - Bed guides are induction-hardened and ground - Headstock with induction-hardened and ground gears - Spindle is mounted on high-precision bearings - Friction-free sliding of the carriage - Electrical system in an airtight cabinet with components from Siemens and/or Schneider - Spindle reduction sleeve - 2 dead centers - Chip guard with microswitch, turret plexiglass guard, rear guard along the entire machine length, protection of lead screw and feed rods, emergency stop button - Chip tank on wheels - Cooling system with electric pump - Central lubrication of the guideways with automatic pump - Traveling and fixed steady rest - Service tools and wrenches, test certificate, electrical diagram, operating and maintenance manual - Machine built according to EC standards Optional features: - 3- / 4-jaw chuck Technical data - Center height: 260 mm - Swing over bed: 520 mm - Swing over carriage: 300 mm - Swing over cross slide: 690 mm - Distance between centers: 1500 mm - Bed width: 400 mm - Spindle bore: 105 mm - Spindle nose: 11" Camlock - Spindle speed steps: 12 - Spindle speed: 16 - 1200 rpm - Main motor power (S1 - 100%): 7.5 kW (optional 9.2 kW) - Longitudinal feed: (93) 0.028 - 6.43 / (65) 0.063 - 2.52 mm/rev - Cross feed: (93) 0.012 - 2.73 / (65) 0.027 - 1.07 mm/rev - Metric threads: (54) 0.5 - 224 / (22) 1 - 14 mm - Whitworth: (54) 1/8 - 72 / (25) 2 - 28 tpi - Module threads: (54) 0.5 - 112 / (18) 0.5 - 7 mm - Diametral pitch: (54) 1/4 - 64 / (24) 4 - 56 dp - Cross slide travel: 340 mm - Top slide travel: 150 mm - Tailstock quill diameter: 85 mm - Tailstock quill travel: 200 mm - Tailstock quill taper: MK5 Gedjpq R Rdspfx Ap Ajiw - Total weight: 3200 kg

Condition: ready for operation (used), Year of construction: 2002, operating hours: 35,816 h, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, overall weight: 7,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 16,800 W, number of axes: 3, This 3-axis HERMLE C 800 V was manufactured in 2002. It features a spindle speed range of 20 to 10,000 rpm and a spindle power of 25 kW. The machine has a net weight of 7,000 kg and includes additional equipment such as a cooling unit and a jib crane. If you are looking to get high-quality machining capabilities, consider the HERMLE C 800 V vertical machining centre we have for sale. Contact us for further details. Godjzcylqopfx Ap Aoiw - Control Unit: Heidenhain (Control On: 114,325 hours)- Machine On Time: 111,736 hours- Program Run Time: 40,346 hours- Spindle On Time: 35,816 hours- Drive On Time: 76,783 hours- Axes In Motion: 37,963 hours- Operation Voltage: 400 V / 3 ~- Frequency: 50 Hz- Control Voltage: 24 V =- Total Nominal Current: 63 A- Total Rating: 43 KVA- Spindle Speed Range: 20 to 10,000 rpm- Spindle Diameter at Front Bearing: 70 mm- Tool Taper/Spindle Interface Options: HSK A63 (DIN 69063)- Tool Clamping Retention Force (HSK A63): 18 kN- Spindle Power (40% / 100% ED): 25 / 16.8 kW- Spindle Torque (40% / 100% ED): 159 / 107 Nm- Maximum Spindle Speed with Open Guard Doors: 3,000 rpm- Additional Equipment Included:* Cooling Unit / Chiller (FLKS 170)

Condition: good (used), Euro pallet stacking frames, approximately 1,500 units in stock. Available for purchase in quantities of 100 or more / price per unit: €7.50 net. Available for purchase in quantities of 500 or more / price per unit: €6.50 net. Gjdpfx Apszlfcfj Aeiw Available for purchase in quantities of all 1,500 units / price per unit: €5.50 net. Free loading into truck, pickup from warehouse in Iserlohn.

Condition: excellent (used), load capacity: 2,000 kg, Height-adjustable welding positioner with a load capacity of 2 tons, including infinitely adjustable clamping extensions and clamping jaws. Gijdpfx Apjzk Ra To Aow Condition: very good. Speed, height, and tilt are infinitely adjustable. Hand and foot remote control. Welding current transmission: 600 Amperes. Dimensions: Length: 1940 mm Width: 1200 mm Disc diameter: 1200 mm Height (tilted): min. 700 mm, max. 1550 mm Height (horizontal): min. 900 mm, max. 1700 mm Weight: 1750 kg.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10604 Manufacturer: UNION Gjdszkpv Hspfx Ap Asiw Type: TC 110 Year of construction: 2004 Type of control: CNC-Steuerung Control: SINUMERIK 840 D Powerline Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1250 mm Z-Travel: 1000 mm W-Axis: 550 mm Table Height: 1050 mm Spindle Diameter: 110 mm Table Dimensions (Lengthxwidth): 1600 x 1250 mm Number of T-slots: 10 Max. Workpiece Weight: 6000 kg Clamping Area: 1250 mm T - groove width: 22 mm T - slot spacing: 125 mm Tool Taper: ISO 50 Max. Torque: 1639 Nm Feed Speeds X/Y/Z Axis: 6000 mm / min Rapid Traverse X-Axis: 15000 m / min Rapid Travel Y-Axis: 15000 m / min Rapid Traverse Z-Axis: 15000 m / min Feed Capacities X/Y/Z: 16000 x 16000 x 20000 N swivel angle: 360 ° Further information: Includes angle head 0,001° The machine can be viewed under power.

Condition: used, Year of construction: 2002, turning diameter over cross slide: 260 mm, turning diameter: 200 mm, spindle speed (max.): 500 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,377 mm, total length: 4,165 mm, total width: 1,594 mm, overall weight: 3,200 kg, bar diameter (max.): 50 mm, For sale is a CNC turning machine with 6 driven tool positions, manufactured by Gildemeister, model CTX 310, from the year 2002. The machine is in good condition; of particular note are the low spindle hours and the measuring system. Technical data: Year of manufacture: 2002 Max. spindle speed: 5,000 rpm Gedpfx Aozkr Skop Aoiw Speed at constant power: 833-3890 rpm Spindle power: 7.5 kW Chuck diameter: 210 mm Spindle bore: 68.5 mm Distance between centers: 581 mm Center height: 190 mm Diameter over machine bed: 330 mm Diameter over slide: 260 mm Swinging diameter: 200 mm Bar capacity: 50 mm Z-axis travel: 450 mm X-axis travel: 160 mm Rapid traverse Z: 30 m/min Rapid traverse X: 20 m/min Rapid traverse C1: 100 rpm Torque C1: 112 Nm Feed force Z: 4500 N Feed force X: 4500 N Number of axes: 2 Turret with tool drive from Sauter Tool positions: 12 Driven tool positions: 6 Cross-section of tools: 20*20 mm Speed of driven tools: 4200 rpm Power of driven tools: 4.2 kW Footprint (installed): 4,165 * 1,594 * 2,377 mm Footprint (transport): 3,190 * 1,600 * 1,700 mm Weight: approx. 3,200 kg Upon request, transport and loading can be arranged throughout Europe for an additional charge. Prices are plus VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Year of construction: 2016, condition: repair required (used), functionality: unexamined, HS 800 basic package Gsdpjvm Uqrefx Ap Ajiw Spiral shaft screen deck AA209-150 Special paint finish: Green

Condition: excellent (used), fuel type: electric, Year of construction: 2024, Drivetrain Drive: Track Weights Empty weight: 500 kg Functional Lifting capacity: 1.200 kg Dimensions of cargo space: 140 x 80 x 42 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Gjdpfx Apjzlrcfs Ajiw Other information Delivery terms: EXW Production country: NL Additional information Please contact Vink Machinery for more information Hoeflon TC 1 with turntable * 2024 * Battery drive * 360-degree turntable * Remote Control * One-hand operation * 1200 kg lifting capacity * 500 kg own weight

Condition: used, Year of construction: 2000, Gildemeister CTX 400 S2 Year of manufacture: 2000 Gisdjzgupkopfx Ap Aew 2-axis machine (X and Z) 12-tool turret, VDI30 Fanuc 21iT control system Tailstock Chip conveyor included Very good condition, machine comes from a school Operating hours: 14,000

Condition: excellent (used), fuel type: electric, Year of construction: 2019, Drivetrain Drive: Track Weights Empty weight: 500 kg Functional Lifting capacity: 1.200 kg Dimensions of cargo space: 140 x 80 x 42 cm CE mark: yes Condition Technical condition: very good Gjdpfx Aezlqy Njp Asiw Visual appearance: very good Other information Delivery terms: EXW Production country: NL Additional information Please contact Vink Machinery for more information Hoeflon TC 1 with turntable * 2019 * Battery drive * 360-degree turntable * Remote Control * One-hand operation * 1200 kg lifting capacity * 500 kg own weight

Condition: new, Dough rounder Dough rounders are devices that are used to shape the dough They are used in the bakery and confectionery industry They can be banded and spiral Godpjuuc Nzofx Ap Aoiw The spiral rounder uses a spiral to shape the dough The machine shapes the dough thanks to the aluminum cone and aluminum sleeves around which it spirals The dough that comes from the dough compartment falls into the aluminum inlet groove All surfaces over which the dough moves are coated with Teflon Thanks to the system with flour and optional blowing of hot or cold air on the grooves, the dough does not stick to the drum Working range: 100 - 800 gr Dimensions: 950 x 950 x 1520 mm Weight: 175kg Electrical power: 1.1kW

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 100cm Width: 185cm Height: 160cm Gisdpfx Ajf Sabyop Ajw Electric power: 2.2kW Delivery time: After the payment, from the stock