Used Cup Machine for sale (66,506)

Condition: good (used), Year of construction: 1999, MAKA HC 57 robot, for 5-axis machining Year of manufacture: 1999 Machine in gantry design with rack and pinion drive. Technical data: CNC control BWO 900C, for 5-axis machining. Integrated PC with 1 MB memory and 3.5" floppy disk drive. Mobile control panel. Machine table approx. 6,000 x approx. 1,270 mm. Working areas / machinable cube size with tool D 160 / length 160 mm: Y-axis: approx. 6,000 mm in 3-axis operation, approx. 5,700 mm in 5-axis operation X-axis: approx. 1,050 mm in 5-axis operation Z-axis: approx. 190 mm / travel approx. 420 mm A-axis: 540° B-axis: 360° (swivel axis +/- 180°) Rapid traverse speed X/Y-axis: 45 m/min. Z-axis: 10 m/min. 1 universal head for 5-axis milling, with 50° angled head, power max. 12.5 kW, speed continuously variable, adjustable up to 17,000 rpm. Milling spindle liquid-cooled. Chip extraction system with slat curtain and suction nozzle for room air extraction for 5-axis operation and swiveling extraction for 3-axis operation. Tool interface ISO 40 for automatic tool changer system. 1 chain tool magazine with 24 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: 10 support tubes on linear guides with pneumatic release device for quick positioning. 2 control circuits for stops "Raise / Lower" 2 control circuits for e.g. sliding strip "Raise / Lower" 2 control circuits for pneumatics "Clamp / Release" Laodpfx Aszwk Taspdjg 2 vacuum control circuits with button for clamping and automatic reset via CNC programming. 1 chip conveyor integrated in the table, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Vacuum supply: 1 vacuum pump, including tank with 250 liter capacity for rapid vacuum build-up. Other: 10 vacuum supports with various suction cups. 4 clamping devices for posts / curved parts, with pneumatic clamping. 4 pneumatic stops Automatic central lubrication. Control cabinet with air conditioning unit. Work safety: Moving protective cabin with safety bumpers on the operator side. Any necessary safety measures for the rear of the machine must be provided by the customer. The machine can be inspected in working order in the southern Germany region, near the A81 highway / Black Forest.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Work area 3050 x 1550 mm - Drives with maintenance-free three-phase motors - Stable, easily accessible C-frame - Coordinate guidance - Linear magazine with 25 positions for clamping dies and tools - Follow-up device with programmable pressure clamp - Flap for stamped parts 500 x 500 mm incl. sensor - 2 scrap containers (=> not included with part conveyor belts) - Foot pedal for die closing - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axis - Ejection cylinder for laser parts - Fast flap for laser parts 500x500 mm incl. sensor - Adjustable laser cutting support - Slag cone detection TRUMPF Laser - Laser TruFlow 2700 incl. LensLine and optimized standby mode - High-frequency excitation - Closed beam guidance - Fine filtration of compressed air for beam pipe ventilation Cutting Head Lodpszv Twxjfx Apdoag - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device (UTI) - LensLine with condition monitoring - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable pressure clamp position - Tool length compensation - Scrap extraction - Calculation of filling level in the punching console - Stroke counter for punches - Spray lubrication for punches - Level monitoring for tool lubrication Control System - Open control system based on Bosch Rexroth IntraMotion MTX - Integrated technology data - 160 GB hard drive capacity - External control panel with 15" TFT touchscreen - Programmable cutting gas pressure - Teleservice interface via the internet - Automatic shutdown with wake-up function - Production plan Data Transfer - USB interface - RJ45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Multi-beam light barriers - Rapid shutdown of drives - Warping detection - Protection against stray radiation - Compact dust extraction system Extended Standard Equipment - Hydraulic clamping die (4 pieces) - Ball tables (=> not included with brush tables) - Chip container (=> not included with chip conveyor) - Cooling unit (water-air) + Laser TruFlow 3200 incl. LensLine and optimized standby mode + MultiTool function + Thread forming function + MultiShear function + Roll technology function + Softpunch function + StripLine function + Active die + Height-adjustable clamping die (4 pieces) + Follow-up cylinder - Vibration-damped installation + Chip conveyor with tilting container + Brush tables with loading and unloading assistance SheetMaster N0140A0054 automation: - Suction frame with 36 suction cups (y-axis = 400 mm) - Movable suction bars (v-axis = 170 mm) - Peeling suction cup - Vacuum sensor - Sheet thickness gauge for double-sheet detection - Central lubrication - TRUMPF control system based on Rexroth IndraMotion MTX - Automatic die closing of the machine + Extended guide rail + Table extension (brush design) + Fixed additional support table on the left (brush design) + Automatically adjustable additional support table on the right (brush design) + Large C-frame for processing oversized parts + Parallel loading and unloading of the SheetMaster during main processing time + Unloading monitoring + Lowerable GripMaster for large formats (3000 x 1500mm) + Scissor lift table (3000 x 1500)

Condition: good (used), functionality: fully functional, machine/vehicle number: 901, travel distance X-axis: 370 mm, travel distance Y-axis: 470 mm, travel distance Z-axis: 405 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 75 rpm, table length: 500 mm, table width: 380 mm, spindle mount: MK 2, total height: 2,000 mm, total length: 1,590 mm, total width: 1,290 mm, quill stroke: 155 mm, Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill. -Jig boring machine: including tool cabinet with various tools -Table dimensions 380 x 500 mm -Travel: Z 405 mm/Y 470 mm/X 370 mm -Quill stroke: 155 mm -Take: MK2 (plus outer cone for spindle tool) -Speeds: 75 - 2000 rpm -Machine dimensions: 1590/1290/H2000 mm -Machine weight: 1774 kg -Cabinet dimensions: 720/460/H1000 mm Lajdpfxjzrmf Is Apdjg -Cabinet weight: 158 kg Price negotiable Rotary table shown in one of the pictures not included Worldwide shipping can be arranged at additional charges

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 250506-mxa-03, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Raytools, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 1,500 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 4 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 600 mm, working length: 3,000 mm, working width: 1,500 mm, cutting speed: 5,000 mm/min, input voltage: 380 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 2,400 kg, total length: 4 mm, total width: 3 mm, total height: 2 mm, warranty duration: 3 months, air pressure: 16 bar, Equipment: CE marking, centralized greasing system, cooling unit, emergency stop, Fiber laser metal cutting machine — 1500 W MAX Photonics (Senke SKL-1530F) Brand new, unused — still sealed in original factory export packaging (0 operating hours). Immediately available. High-precision, long-term stable and affordable fiber laser cutting for professional sheet-metal work. Ideal for metal fabrication shops and repair workshops. Delivered as a complete, ready-to-run package. Complete package — key features: Lsdpfxjztn N Do Apdeag ● MAX Photonics fiber laser source, 1500 W ● DELTA servo motors & drives (1500 W X/Y, 400 W Z) ● Raytools control system with RayTools BM110 cutting head ● Large 1500 x 3000 mm working area (fits a full standard sheet) ● Open-frame design — easy access and loading of oversized plates ● Reinforced, stress-relieved welded steel bed for lasting dimensional stability ● Taiwan YYC gear rack + HIWIN 25 square rails + TBI ball screw (Z) ● Positioning speed up to 150 m/min · cutting speed up to 7 m/min (material/thickness dependent) ● S&A industrial water chiller ● France Schneider electrics · SMC pneumatics · France Motoreducer · automatic central lubrication ● Included air compressor (15 kW, 1.6 MPa, 340 L tank) — enables low-cost cutting with compressed air, so bottled nitrogen/oxygen is reserved only for jobs that require it. Lower running costs and greater gas autonomy from day one. ● Included 30 kVA voltage stabiliser — stable power supply, protects the electronics ● Included spare consumables: 100 protective lenses + 100 copper nozzles — full starter set of wear parts Materials: carbon steel, stainless steel, aluminium, brass and other sheet metals — sheet-metal processing, auto parts, metal crafts, chassis/cabinets, kitchenware and similar industries. Sales exclusively to commercial businesses. Machine located in Jõhvi, Estonia — viewing by appointment; INCOTERMS: EXW

Condition: used, Thread rolling machine UPWS 25. Ljdezd Rf Nspfx Apdjag

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup Lsdsy Samujpfx Apdjag - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: used, Year of construction: 2019, New machine (used only for demonstration purposes in a school) Number of axes: 4 X-axis travel: 4000 mm Y-axis travel: 1670 mm Z-axis travel: 500 mm Spindle power: 12 kW, 24000 RPM Ljdpfx Aezuxi Rspdsag * Number of axes: 4 * X-axis travel: 4000 mm * Y-axis travel: 1670 mm * Z-axis travel: 500 mm Technical specification * Spindle power: 12 kW * Spindle speed: 24000 RPM Additional information * Working area (maximum table size) * X: 3300 mm * Y: 1280 mm * Z distance: 250 mm * Spindle: * Tool interface: HSK F63 * Rated power at: approx. 12,000 RPM * Cooling: Air-cooled * Rotation: CW / CCW * Tool magazine * Linear tool magazine (side-mounted): 12 positions * Additional linear magazine on the portal: 4 positions * Max. tool diameter: 250 mm * Max. tool length: 300 mm * Drilling unit * Model: DH 24 6H 2S * Vertical spindles: 18 (12 in X, 6 in Y) * Horizontal spindles: 6 (4 in X, 2 in Y) * Max. drill length: 70 mm * Max. tool diameter: 10 mm * Nut sawing machines: 2 (X and Y) * Max. saw diameter: 120 mm * Max. speed: 6,000 RPM * Vacuum table * 6 supports (instead of 4) * Two-circuit vacuum system * Height of vacuum suction cups: 100 mm * Pneumatic support locking * Adjustable side stops (Y-axis) * Axis system * X-axis: Rack and pinion drive * Y/Z-axis: Ball screw drive * Linear guides in all axes * Automatic central lubrication * Control and software * CNC control with CAD/CAM software * 3D simulation preview * DXF import function * Parametric programming * Remote maintenance package (internet-enabled)

Condition: used, Year of construction: 2018, operating hours: 6,442 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X working area: 3000 mm - Y working area: 1550 mm - Z clearance: 250 mm Axis Systems - X-axis: Helical rack and pinion drive - Y-axis: Precision ball screw drive - Z-axis: Precision ball screw drive - Linear guides on all axes - Automatic central lubrication Main Spindle - 5-axis electro spindle - Type: 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Ceramic bearings with air cooling - Full power available at approximately 12,000 rpm - Speed range: 1,000 - 24,000 rpm - Clockwise rotation - Integrated tool changer interface - Liquid-cooled spindle - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System 12-position linear tool magazine - Mounted on the left side of the machine frame - Separate station for tool changers - Maximum tool diameter: 250 mm Laedpjzuw E Rofx Apdeg - Maximum tool length: 240 mm 18-position disc tool magazine - Mounted on the gantry - Suitable for drilling tools and tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Drilling Aggregated Head DH18 6H 1S drilling head - 12 vertical spindles: 7 spindles in the X direction, 5 spindles in the Y direction - 4 horizontal spindles in the X direction - 2 horizontal spindles in the Y direction - Drilling stroke: 70 mm - Maximum drilling depth: 70 mm - Tool holder: 10 mm - Individual control of the spindles - Integrated slotting saw - Saw blade diameter: 120 mm - Maximum slotting saw blade thickness: 5 mm - Speed up to 7,500 rpm Vacuum and Clamping System Console Table - 6 consoles with front and rear stops - Wireless two-circuit vacuum system - Height of vacuum cups: 100 mm - Pneumatic console locking - Programmable pneumatic stops - 4 adjustable side stops - Reinforced support arms - Load-bearing capacity of the support arms: 40 kg each Vacuum Pump Capacity: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz - Additional vacuum connection for template machining - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air switching for all consoles WoodFlash Software Package Control Panel - Complete machine operation via the CNC panel - Program creation and editing - Tool and workpiece management - Manual machine commands - Monitoring of vacuum, compressed air and safety systems Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB connection Operator Device for Feed Rate - Manual feed override potentiometer - Variable feed rate adjustment during machining Safety Devices - CE safety system - Safety mats instead of light curtains - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Sensors to monitor vacuum and compressed air Optional Equipment - External release switch - Protected energy chain system - Additional locking for A and C axes - Saw blade changing station on the gantry - Operating hours: 6442 hrs.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, laser type: fiber laser, laser source manufacturer: Raycus, laser power: 6,000 W, laser wavelength: 1,070 nm, working length: 1,500 mm, working width: 3,000 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.05 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, total length: 2,610 mm, total width: 5,125 mm, total height: 2,128 mm, Equipment: CE marking, The WatMachinery ZMB1530 6kW is a heavy-duty fiber laser cutting machine from the ZMB series, engineered for fast, precise, and reliable sheet metal processing. This model is fitted with a Raycus 6kW fiber laser source and offers a cutting area of 3000 x 1500 mm, making it an optimal solution for workshops and industrial production lines working with steel, stainless steel, aluminum, brass, and other metals. The machine is equipped with a Raytools BS06K auto-focus cutting head, Delta / INOVANCE servo drives, Taiwan-made rack transmission, HIWIN / DTX linear guideways, a French Motovario gearbox, and the Cypcut control system. Its robust construction includes a reinforced machine frame, enclosed safety cabin, automatic lubrication system, industrial control cabinet, integrated smoke extraction, and an industrial-grade PC. Each component has been selected to ensure high positioning accuracy, stable drive transmission, and reliable long-term operation. The ZMB1530 is designed for continuous industrial duty with a 24-hour operating mode, travel speed of 80 m/min on the X and Y axes, and a maximum acceleration of 0.8G. The control system supports multiple file formats, remote operation, and real-time alarms and safety interlocks. An industrial water cooling system guarantees stable performance of the laser source and protects the machine during extended production cycles. As indicated in the material and cutting charts in the product brochure, the machine efficiently processes carbon steel, stainless steel, aluminum, and brass. The ZMB series is ideally suited for industries such as sheet metal fabrication, electrical cabinet manufacturing, automotive component production, general machinery, signage, metal product manufacturing, tooling, and many more sectors. Key Advantages: - 3000 x 1500 mm working area - Raycus 6kW fiber laser source - Raytools BS06K auto-focus cutting head - Cypcut control system - Delta / INOVANCE servo motors and drives - HIWIN / DTX linear guideways - Taiwan YYC rack transmission - French Motovario gearbox - Industrial water chiller - Fully enclosed protective cabin - Automatic lubrication system - Industrial PC with integrated vision system - Designed for 24/7 industrial operation Technical Specifications: Model: ZMB1530 / ZM-Series Laser Source: Raycus Fiber Laser Laser Power: 6 kW Working Area: 3000 x 1500 mm Wavelength: 1070–1080 nm Interfaces: USB, RJ45 X-Axis Travel: 3000 mm Y-Axis Travel: 1500 mm Z-Axis Travel: 100 mm Traverse Speed (X/Y): 80 m/min Positioning Accuracy: ±0.05 mm/m Repeatability: 0.05 mm Maximum Acceleration: 0.8G Power Supply: 380V / 50Hz Operating Mode: 24/7 Machine Weight: 3150 kg Machine Dimensions: 5125 x 2610 x 2128 mm Main Components: * Raycus laser source * Raytools cutting head * WatMachinery machine bed and gantry * Taiwan YYC rack * France Motovario gearbox * Delta / INOVANCE servo drives (X, Y, Z axes) * HIWIN / DTX linear guideways * Cypcut control system * HanLi industrial water chiller * CHNT / Schneider electrical components * CKD / SMC pneumatic components * Integrated smoke extraction system * Automatic lubrication system * HP industrial PC Lodpoyr D Nxjfx Apdoag * Enclosed safety cabin Application Areas Suitable for: * Sheet metal fabrication * Electrical cabinet production * Advertising and signage * Mechanical parts manufacturing * Kitchen equipment production * Automotive industry * General machinery industry * Metal product manufacturing * Tooling and measurement component production Pro

Condition: new, Year of construction: 2017, functionality: fully functional, operating hours: 25 h, input voltage: 380 V, type of input current: three-phase, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, overall weight: 2,500 kg, saw band length: 520 mm, saw band width: 580 mm, New machine. Lajdpfeunia Hox Apdog

Condition: used, • Grinding machine for straight edges. Equipped with two processing stations. Depending on the selected diamond grinding wheel, the desired profile is created and polished. All settings are easily and conveniently adjusted from the front (cup wheel, material removal rate, angle of attack). • Serial number: 84082 • Width – 0.90 m • Infeed – 1.40 m, Outfeed – 1.40 m • Machine length – 1.33 m • Height – 2.05 m Laedpfezr Iyajx Apdeg • Overall length – 4.13 m • Weight 1050 kg • Price: Available upon request.

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails 32 adjustable consoles Lodpfjzuwyzsx Apdsag 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Condition: used, BROACHING MACHINE Ledpfot Hr Dfox Apdsag

Condition: used, Year of construction: 2011, AXES Working area X-Y-Z axes * mm 3050-1300-180 Workpiece length in swivel machining mm 1390 Stroke X-Y-Z axes mm 3460-1735-250 Max. travel speed of the X-Y axes m/min 60 WORKING TABLE Number of workpiece supports and vacuum cups 6 / 2 Standard type Standard End stops / Position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles Std/Number/Speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles Std/Number/Speed 1/min 6 (4X-2Y) / 4000 Integrated slotting/sawing unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power Std. / Opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer mounted on the unit carrier in X 4 positions, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction nozzle diameter mm 150+150 (200) Lasdeyymz Uspfx Apdsg Machine weight Kg 3000 * X Distance between the stops - Y Milling center as reference point; Z Workpiece passage GENERAL FEATURES CNC-controlled boring and milling center, in C-frame design and working table with adjustable workpiece supports and vacuum cups, for performing: - Vertical drilling on the surface of the panel - Horizontal drilling on all four sides of the workpiece - Slot milling with disc cutter in "X" direction - General milling operations Self-supporting structure and working table Structure made of a steel welded construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV supports. Movable unit carrier Box construction made of cold-rolled steel with internal reinforcing ribs, protective devices with bumpers. Working unit Consisting of a drilling head with vertical spindles, horizontal spindles, an integrated slotting and sawing unit and an SCM electrospindle with tool quick-change system type HSK 63 F. Travel paths of the portal and the unit carrier Movement in the X, Y and Z axis takes place on linear prismatic ball-bearing guides with the aid of pre-tensioned linear guides. The power transmission of the X-axis (movable stand) takes place via a pre-tensioned, backlash-free rack and pinion drive with diagonal movement. The movement of the unit carrier in Y and Z direction takes place via pre-tensioned linear guides. The positioning of the working units and the control of the machine functions takes place via "Brushless" three-phase servomotors and digital drives. CNC CONTROL The control unit consists of a numerical control for the milling and drilling machines and a pre-connected personal computer with a graphical user interface "XILOG PLUS". PC -Office- operating system Windows XP - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine interface software Xilog Plus Xilog Plus features Programming - parametric, graphical and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation in three axes, linear in space, spiral in the chosen plane - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool changes - cycles - Possibility of plate zero-point shift for performing drilling on inclined or curved plate sides - Complete compatibility with CAD/CAM Routocam (SCM) - AlphaCam Integrated additional functions - Calculator for direct transfer of the calculated data.

Condition: used, Year of construction: 2017, machine/vehicle number: LC623, Used Thermoforming Packing water cup line - 11500 BPHTechnical Specifications & Performance DataThis used bottling line is a complete cup filling and packaging solution engineered for beverage production in water applications. The centerpiece is the TR-ALP 10 cup form-fill-seal machine, designed to thermoform, fill, seal, and cut PET cups with high efficiency. With a 5x2 format (10 cavities per cycle) and a working capacity of 17–20 cycles/min, the system achieves up to 12,000 cups/hour, ideal for second hand industrial packaging lines seeking reliable output. The integrated end-of-line equipment includes a robot cartoner, a case erector, a case sealer, and conveyors for smooth downstream handling.Production speed: up to 12,000 cups/hour (10,200–12,000 cups/hour typical)Cycle rate: 17–20 cycles/minCavity configuration: 5x2 (10 cavities per cycle)Punch size: 71 x 71 mmSupported cup formats: 100 ml and 200 mlBase material: PET film, 500–700 micronLid materials: Aluminum 40 µm or 12 µm / APET + 12 µm / HSL heat-sealable, peelableProduct contact parts: Stainless steel AISI 316Maximum film width: 390 mm (base), 375 mm (upper)Reel diameters: lower 800 mm, upper 300 mmMain machine weight: approx. 2,500 kgCase sealer model: GEM F470Case erector model: F2000Advanced Automation & Control SystemsThe line features robust automation for consistent cup forming, accurate dosing, and reliable sealing. The TR-ALP 10 employs a time-controlled gravimetric dosing system with 10 control valves for uniform fill volumes. Electrical architecture is industrial-grade with clear protection ratings and safety circuitry.Power supply: 3 x 380 V ACInstalled power: 25 kWCurrent: 40 AFrequency: 50 HzControl voltage: 24 V DCDosing system: time-controlled gravimetric, 10 valvesFilling temperature: 15–25 °CSafety hardware: integrated emergency and safety switching (industrial components)Production Line Integration CapabilitiesEngineered for seamless industrial packaging, the line integrates cup production with end-of-line case handling. A vacuum pick-and-place robot cartoner manages multiple cup sizes, with packing recipes for both 100 ml and 200 ml formats. Automatic case erecting, sealing, and three conveyors enable inline or modular operation in diverse layouts.End-of-line: robot cartoner, case erector F2000, case sealer GEM F470, conveyorsPacking configuration: 30 cups/carton (200 ml: 2 layers 15x2; 100 ml: 3 layers)Format flexibility: 100 ml and 200 ml tooling setsContainers: PET cups; secondary packaging in cartonsMachine Condition & Maint... Lodpfxjy Icp Ds Apdsag

Condition: used, optional equipment: Machine table in 2 support systems – left table half with TVN supports, right table half with ALU table and its own vacuum circuit. Travel ranges: X = 4400 mm, Y = 1720 mm, Z = 400 mm Tool holder HSK 63 F Motor 7.5 kW, 900 - 20,000 rpm Inverter 18 kW for spindle unit – increased power output up to 11 kW Tool changer RAPID 24 = 24 tool positions Drilling unit with 18 spindles Equipment for door processing (H = 110 mm) - for processing left and right doors - with 4 pneumatic positioning aids, each with a capacity of 20 kg - 6 reference stops with veneer overhang Ledpozxzgmefx Apdeag Laser positioning for TV system Central extraction connection above the CNC unit Vacuum pump 250 m³ Control system/control cabinet: - NUM Series 1000 with Office PC - XILOG-PLUS - Cable remote control - Analog modem with software for teleservice Swinging machining standard for 2 work areas LED display / suction cup positioning Motorized chip conveyor 3-part floor mat / front Large accessory package with vacuum suction cups, stops, etc. Machine from a carpentry business closure due to retirement Machine is still in operation and in very good condition available at location

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. Laodpfx Aozzlhaopdjg The main difference between the MTRent MTcut v60 and the MTRent MTcut v60D lies in the inclusion of an additional rotary axis ("D" stands for rotary table or integrated 4th axis for extended machining capabilities). TECHNICAL DETAILS Travel in X-axis: 600 mm Travel in Y-axis: 420 mm Travel in Z-axis: 450 mm Distance from spindle nose to table: 120–570 mm Spindle speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/Air Tool interface: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Rotary table or integrated 4th axis Heidenhain iTNC 620 CNC control Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with dual gripper Central lubrication Large access door to the work area Loading option from above using an overhead crane Two waterproof work area lights CE certification • The height and weight of the asset must be considered when selecting the transport vehicle. • A forklift is available for loading. • If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. • The sale is made without any warranty or guarantee. • The information on the technical specifications comes from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: used, Year of construction: 2012, - Machining area: 5300x1400 mm - Main spindle replaced 3 years ago - 18-position tool changer Technical data Machining area - In the X direction: 5300 mm - In the Y direction with main spindle + WZ-0: 20 mm: 1400 mm - In the Y direction with drilling unit: (all vertical drills) 890 mm - Single-position machining: X = 2 x 2550 mm - Free space in the center: X = 200 mm Ledpfx Aszuw Rtjpdsag - Alternating field machining: X = 2 x 2250 mm - Free space in the center: 800 mm 1 automatic tool/adapter changer magazine - Arrangement: mounted on the support, moving in the X direction - Disc changer with 18 magazine positions Guidance system - All axes are equipped with pre-tensioned, surface-hardened precision roller guides. Central lubrication - Manual central lubrication for all main axis linear guides and Z ball screw. 1 vacuum pump, 90 m3/h Console table consisting of: - 2 work piece stops fixed on the right and 2 on the left in the X direction, for movement in the Y direction - 10 adjustable support arms in the X direction, each with a rear stop - All stops are controlled by the program - The suction plates are fixed via the patented 2-circuit clamping system, eliminating the need for hoses. - 8 smooth support rails, automatically retractable - 2 push buttons for the workpiece clamping/releasing function Additional 2nd vacuum pump, 90 m3/h 1 additional central stop row, for centering workpieces Chip conveyor 1 main spindle - Drive power: 10.0 kW in S-6 operation - 7.5 kW in S-1 operation - Tool holder: HSK F63, taper diameter = 38 mm, similar to DIN 69893 - Speed range: infinitely variable RPM, programmable 1 centrally integrated CNC axis, rotating 360 degrees - for all adapter units, with torque support on the main spindle and pneumatic interface 1 vertical drilling unit l14 with 6 spindles, horizontal and attachment unit for a dado cutter - Horizontal drilling units with 2 outputs each Attachment unit for a dado cutter - Swivel range: 0 or 90° Control system ICOS CNC Modern, powerful PC-based control system with: - User-friendly interface with Windows standards - Trajectory control of all servo axes - Job list / order processing - IMA backup and recovery system on two hard drives - Uninterruptible power supply (UPS) IMAWOP software package - for dialog-oriented creation of CNC machining programs - - 3D view and basic simulation of the programmed workpiece, the suction cups and consoles including tool and adapter display.

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Vacuum fryer used for vegetable chips. In very good condition. Located in The Netherlands. Lasdpfxexg Tfqj Apdsg

Condition: good (used), Year of construction: 2004, operating hours: 24,500 h, functionality: fully functional, machine/vehicle number: 23940014, color channels: 3, resolution (max.): 320 dpi, paper width (min.): 82 mm, paper width (max.): 305 mm, paper height (max.): 914 mm, number of feeding trays: 4, total length: 2,200 mm, total width: 900 mm, total height: 1,700 mm, space requirement length: 2,360 mm, space requirement width: 1,100 mm, space requirement height: 1,900 mm, counter reading (color): 12,04,236, year of last overhaul: 2023, type of input current: AC, input current: 24 A, input voltage: 400 V, working width: 960 mm, Equipment: documentation/manual, For sale is a professional digital photo lab – complete system – ready for immediate use. Location: VISP, SWITZERLAND Highlights: - S4 Digital ICE scanner, - Original Noritsu CS-2 controller - Original EIZO ColorEdge CG21 color monitor, - Software version 5.02S.003, - Original installation CD and documentation available, - Automatic film transport carrier AFC (135/240), - 9 paper magazines. Inspection and test prints are possible by appointment. Technical data: - Exposure: RGB laser system (3 lasers) - Resolution: approx. 320 dpi - Print capacity: up to approx. 1600 prints/hour (10x15 cm) - Speed: approx. 15-17 prints/minute - Supported film formats: APS, 135 and 240 negative films/slides, 120 films 4.5x6 cm, 6x6 cm, 6x7 cm - Paper widths: 89/102/127/152/203/305 mm - Image formats: JPEG, TIFF - Original dongle available - Power supply: 3N-380/400 V, 50/60 Hz - Power consumption: approx. 10 A per phase Laodozmh Awepfx Apdsg - Weight: complete with scanner unit 620 kg. - Dimensions: 1170 x 760 x 1120 mm Scope of delivery: - Noritsu QSS 3202 SD - S4 Digital ICE scanner - CS-2 controller - EIZO ColorEdge CG21 - Automatic film carrier - 7 paper magazines - Original installation CDs - Original manuals - Chemical racks: 5 x 1 l RA-4 developer starter, 6 x 10 l Enviroprint replenisher (paper developer) MP 60, 9 x 2 l RA-4BX-VR bleach-fix/regenerator - Accessories available upon request. Condition: The system comes from a well-known photo shop specializing in high-quality lab work and photos. It was used until the business closed (April 2026) and regularly serviced (most recently in 2023). It is in well-maintained condition. A total of 1,204,236 images have been printed, including 11,255 black and white and 7,367 index prints. According to the technical service of Noritsu-Veritec, the operating hours cannot be read from the system. They are estimated at 24,500 hours. The machine is being sold because of the owner's retirement and the closure of the business. Loading can be supported if required and by arrangement. Transport and installation must be arranged by the buyer. If you have any questions or are interested, please do not hesitate to contact us. Inspections are possible at any time by appointment. The machine is ideally suited for photo labs, dealers in used lab systems, spare parts dealers, universities and training centers, and collectors of professional Noritsu systems.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Working area X: 3110 mm Working area Y: 1620 mm Working area Z: 180 mm 3-axis electro-spindle, 9.5 kW Vertical drilling bits: 13 Horizontal drilling bits X: 6 Lasdpfx Aszltgrspdjg Horizontal drilling bits Y: 4 Grooving blade in X direction 14-position tool changer on the machine side Approximately 14-position tool changer on the machine side Work table with 6 rows of supports Laser positioning device for suction cups with Maestro CNC and Xilog Plus Panel Mac Touchscreen operator console SCM eye-M PRO-SPACE safety system 1 vacuum pump, 90 m3/h Weight approx. 3800 kg Includes door mortising unit Available June 2027

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece length (max.): 4,600 mm, workpiece width (max.): 1,935 mm, overall weight: 6,200 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, This 5-axis BIESSE ROVER C9.5 Conf.3 was manufactured in 2010. Machine is still working in it original, first-time installation place here in Norway. All yearly services done by Biesse support. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), 5 vertical and 2 horizontal spindles, 5-axis electric spindle 11 kW HSK F63 4-axis electric spindle 11 kw HSK 63 3 units for storing of the tools. ETS system for positioning of 8 support beams and 32 vacuum cups 250 m3 Busch vacuum pump. Central lubrication Biesse Work Advantage version . It boasts high travel speeds (X/Y: 100 m/min, Z: 30 m/min) For all technical specification please read included data sheet below. If you are looking to get high-quality woodworking capabilities, consider the BIESSE ROVER C9.5 machine we have for sale. Please contact Rekman Maskin & Service for future information. Rekman Maskin & Service work with Biesse machine since 1986 Lasdsz Arvtspfx Apdog

Year of construction: 2004, condition: good (used), Rotary 2-head automatic packaging machine for filling and sealing Laedpehpt Nxofx Apdsg pátes and meat stuffing into aluminium cups intended to sterilisation.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1984, machine/vehicle number: 12.873, throat depth: 300 mm, punching force: 100 t, overall weight: 2,250 kg, cutting width (max.): 600 mm, TECHNICAL DETAILS Punching force: 100 t Stroke: 300 mm Punching speed: 28 strokes/min Shearing width: 250 mm Max. sheet thickness: 16 mm Ljdpfx Aezxdquopdoag Round material cutting capacity: 50 mm Cutting width: 600 mm Max. sheet thickness: 20 mm MACHINE DETAILS Control: Conventional Drive: Hydraulic Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,250 x 2,100 mm Weight: 2,250 kg Shipping packages: 1 unit

Condition: ready for operation (used), Year of construction: 2011, operating hours: 16,140 h, functionality: fully functional, machine/vehicle number: 111214, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Heidenhain 530, overall weight: 7,800 kg, TECHNICAL DETAILS Travel range X-axis: 1,100 mm Lasdpjz Apdzofx Apdog Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Number of positions in tool changer: 30 Table dimensions: 1250 x 610 mm MACHINE DETAILS Control system: Heidenhain 530 Operating hours: 16,140 h Machine weight: approx. 7,800 kg