Used Curing Chamber for sale (4,351)

Condition: excellent (used), Vötsch shock test chamber Here we offer you a Vötsch shock test chamber. Water cooled Njdpfx Aaon Avcuonodf Temp. range -80C to +220C Hot chamber +50 to +220 Medium chamber -10 to +90 Cold chamber -80 to +70 Mains voltage 400V +-10% 3/N 50Hz Rated current 30.5 A Rated power 13.5 KW Refrigerant VK : R 404A 3.00kg p*: 25bar Refrigerant TK : R23 15bar p* : 25 bar Condition: used / used Type: VT 7012 S3 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Vötsch Type: VTS³ 7027-25 Nedpfx Aastz Rqmonsdf Heraeus Vötsch temperature test chamber, water-cooled Performance data: With temperature change rate of 25 K/min Test chamber dimensions Height 750 mm Width 580 mm Depth 615 mm External dimensions Height 1775 mm Width 780 mm Depth 1895 mm Temperature range -72°C to + 180°C Temperature deviation temporal ± 0.1 to ± 0.5 Temperature homogeneity in space ± 0.5 to ± 2.0 Temperature change rate cooling 25 K/min Temperature change rate heating 25 K/min Heat compensation at -20 °C 8000 W Heat compensation at +20 °C 8000 W Test volume: 270 liters 2x lateral feed-through ∅ 125 cm 1x side feed-through ∅ 50 cm Cabinet is water-cooled Test room lighting: LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal power: 26 KW Rated current: 44 A Refrigerant: R-452A and R-23 Weight: approx. 980 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VC³ 0100 Vötsch climatic test chamber, air-cooled Test chamber dimensions: Height 950 mm x width 1100 mm x depth 950 mm Device dimensions: Height 2000 mm x width 1300 mm x depth 1916 mm Test chamber 990 liters Temperature tests: Minimum temperature -0°C Maximum temperature +90°C Temperature change rate cooling 0.2 K/min Temperature change rate heating 0.5 K/min Temperature deviation in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.0 K Heat compensation at +20 °C 350W Climatic tests: Minimum temperature +10°C Maximum temperature +90°C Dew point temperature range +4°C to +89.5°C Humidity range 10 to 98% r. h. Humidity deviation over time ± 1 to ± 3% r. h. Temperature deviation temporal ± 0.1 to ± 0.3K Temperature homogeneity in space ± 0.5 to ± 1.0K Voltage: 1/N/PE AC 230V±10% 50Hz Rated power: 2.3 kW Rated current: 10 A Refrigerant: R-404A Weight approx. 1400 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components Njdotz T D Aepfx Aanodf 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Vötsch Type: VCS 7034-5 Water-cooled climatic test chamber Test chamber capacity 335 liters Performance for temperature tests Temperature range -70 to +180°C Temperature deviation in time K ±0.1 to ±0.5 Spatial temperature deviation K ±0.5 to ±2.0 Temperature gradient 1 to 4 Rate of change : Cooling 6.7 K/min Heating 6.8 K/min Heat compensation at +20 °C 3000 W / at -20°C 3000 W Temperature calibration values +23 °C and +80 °C Performance for climate tests Temperature range +10 to +95°C Temperature deviation in time ±0.1 to ±0.3 K Spatial temperature deviation ±0.5 to ±1.0 K Temperature gradient 1 to 2 K Humidity range 10 to 98% Humidity deviation in time ±1 to ±3% Dew point range -3 to +94°C Heat compensation 400W Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 580mm Depth 765mm Height 750mm External dimensions: Width 870mm Depth 1595mm Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Sound pressure level: 64dB(A) Cooling water consumption: 1.4m³/h Refrigerant: R-404A / R-23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate Njdpfxjuxq T Do Aansdf 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Espec Nodpfx Aaoxugq Aenodf Type: TSD-100 100 liters usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range hot chamber: +60°C to +200°C Temperature range cold chamber: -70°C to 0°C Test chamber interior dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile design (on castors) 2 stainless steel specimen baskets Cable entry port ⌀ 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon passing inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Vötsch Model: VT³ 4100 Nodpfxowyu H Es Aanjdf Water-Cooled Temperature Test Chamber S!MCON/32.NET (with Touch Panel) Control System Features: - Color touchscreen with intuitive menu navigation (typically 5.7" or larger) - Programming of temperature/humidity profiles with ramps and dwell times - Data acquisition & logging (e.g., temperature profile, alarms) - USB port for data export (CSV, optionally S!MPATI compatible) - Network interface (Ethernet) for remote monitoring and control - User management with password protection - Interfaces: Volt-free contacts, optionally Modbus or Profibus VT³ 4100 – Technical Specifications (Temperature Test Chamber) - Test volume: 990 liters - Temperature range: -40 °C to +180 °C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1.5 K - Temperature gradient: 1 to 3 K - Temperature change rate (per IEC 60068-3-5): • Heating: 4.0 K/min • Cooling: 3.0 K/min - Maximum heat compensation capacity: 4500 W - Calibration values: +23 °C and +80 °C - Internal dimensions (W×D×H): 1100 × 950 × 950 mm - External dimensions (W×D×H): 1390 × 1955 × 1995 mm Feed-Throughs: The chamber is equipped with feed-throughs on both the right and left sides, allowing insertion of measuring cables and test devices into the test space. • 1 × L1 nominal width 50 mm • 1 × R1 nominal width 125 mm • 3 × R1 nominal width 50 mm Electrical connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Noise level: approx. 62 dB(A) Refrigerant: R452A Weight: 920 kg Important information for buyers: For your security, the following measures are carried out on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if needed 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data; information may be subject to alteration!) For any further questions, feel free to contact us by phone.

Condition: excellent (used), Espec Model: PSL-4KPH Espec Temperature and Climate Test Chamber, Air-Cooled There is a minor dent at the upper edge of the door (see photo). The door closes perfectly, the seal is intact, and the climate chamber operates without any technical issues. The dent is purely cosmetic and does not affect function, sealing, or control accuracy. Temperature range: -70°C to +150°C Humidity range: 20 to 98% r.h. Temperature/humidity fluctuation: ± 0.3°C / ± 2.5% r.h. Temperature/humidity stability: ± 0.5°C / ± 3% r.h. Heating/cooling rates & times: Heating rate: 5.0°C/min Cooling rate: 3.0°C/min Test chamber dimensions: Width 1000 mm x Height 1000 mm x Depth 800 mm External dimensions: Width 1410 mm x Height 1983 mm x Depth 1593 mm Feed-through with silicone stopper, 100 mm With RS232 interface Test chamber volume: 800 liters Refrigerants: R-404A, R-508A Stainless steel construction, AC 400 V 3φ, 50Hz, 31 A Net weight approx. 720 kg For your safety as a buyer, please note the following: The following points are carried out in advance on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. New refill with legally compliant refrigerants 3. After successful inspection, the chambers undergo a trial run monitored by calibrated devices. Njdpfxjwz Er Uo Aanedf Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and correction!) We would be happy to answer any further questions you may have by phone.

Condition: used, Liebisch KEA 300 Constanzo Functional condensate water test device for material and coating testing Description: This device is designed for performing condensate water or water vapor tests in accordance with common standards (e.g., DIN EN ISO 6270). It is ideal for testing the moisture and corrosion resistance of coatings, paints, metals, and plastics. The design is robust, low-maintenance, and perfectly suited for research, laboratory, and quality control applications. Technical specifications: Manufacturer: LIEBISCH Model: KEA 300 Constanzo Nominal power: 1,400 W Chamber dimensions: approx. 500 × 450 × 500 mm (W × H × D) Nedpfx Aajxlzm Tenodf Voltage: 230 V / 50 Hz Chamber material: Stainless steel, corrosion-resistant Controls: None / manual operation Important notice: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See image) (Subject to changes and errors in technical data; specifications may be updated!) If you have any further questions, feel free to contact us by phone.

Condition: used, RS Simulators Water-cooled temperature test chamber New generation rod program controller (SE-702 with touch panel and data logger for measurement recording) Filter dryer, refrigeration oil, and refrigerant (R23/3.25 kg and R452a/12 kg) new upon delivery, including a leak test, oil strainers, and sight glasses replaced The chamber is supplied with an RMS substructure, a frame for holding the test sample, and a separate control panel (Pure RMS housing, NO shaker included!) The special feature: the RMS substructure can be extended like a shaker using a pallet truck. This facilitates a possible test setup outside the cabinet. Measurement lines can also be routed to the outside via a duct in the base plate of the RMS substructure. The system includes a compressed air dryer, also known as a dew protection device, which prevents condensation during the heating phase (commonly found in electronics tests) Application) Test chamber dimensions: Height approx. 1000mm / Width approx. 1400mm / Depth approx. 900mm Temperature range: -70°C to +180°C Current consumption: approx. 100 A Total power: approx. 50 kVA Cooling and heating capacity: 10 K/min Since the chambers are overhauled and converted, the delivery time from the date of purchase is approx. 8-10 weeks!! Type: TS1000/70-10K Njdpfov Rcbajx Aanjdf For your safety, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a test run monitored by calibrated equipment. Condition: Used Scope of delivery: (Temperature chamber TS1000/70-10K, without test chamber contents, without shaker) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), CTS test cabinet climatic chamber Here we offer a CTS climatic chamber. Air cooled Test chamber volume: 200 liters Test chamber dimensions: Height 750, width 650, depth 400 mm External dimensions: Height 1800, width 920, depth 1345 mm Temperature working range temperature range: -40°C / +180°C cooling speed: 4 K / min heating speed: 4 K / min Max. heat radiation at +20°C: 3500 W Temperature constancy, temporal: ≤± 0.3 K. Climate working range Temperature range: +10°C to +95°C. Humidity range: +10%to +98% r.H. Connection: 400 V +6% -10%, 3/N, 50 Hz Rated current 9.4 A Nodpjhwhzwsfx Aansdf Rated power 4,8 kw Weight: approx. 450 kg Refrigerant R404A Type: CTS C-40/200 The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Weiss temperature test chamber Nodpfxsiqk Abj Aanjdf Here we offer a temperature test chamber. Weiss temperature test chamber water cooled Technical data: Test cabinet designation: WT-600/70 Outer dimensions with hinges and door lock height 1995 mm, width 1090 mm, depth 1660 mm Outer dimensions without hinges and door lock height 1995 mm, width 1000 mm, depth 1660 mm Internal dimensions: Height 950 mm, width 800 mm, depth 800 mm Test chamber capacity: approx. 600 liters cold / heat operation -70°C to 180°C Temperature change per time cooling approx. 2.5 K/min Heating up approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Fuse on site: 32 A slow blow Permissible test material weight Total load of grate supports 80kg test chamber floor 80kg, insert grate 40kg Refrigerant: R 404A/R23 Weight: 675kg Type: WT-600/70 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), RS Simulators Here we offer a climatic test chamber. Water cooled 300 liters Temperature range from -75 °C to +180 °C Time deviation +- 0.2 K to +- 0.8 K Average heating rate: approx. 2.1 K/min Average cooling rate: approx. 1.2 K/min Humidity range from 10 % to 98 % rel. humidity Working climate range Temperature: 10 °C to 95 °C Humidity: 25 % to 75 % relative humidity Dimensions: Width 1000 mm 1800 Height mm 1400 Depth mm Voltage: 3x400V/N/PE Current: 40A Refrigerant: R404a / R23 Type: KS 300 / 75 Weight: 630 kg Ndodpfxoiivgve Aanef For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), CTS Type: TSR-30/1000 Water-cooled The type designation of the CTS enclosure series is made up as follows: z. e.g. type TSR -30/1000 1) T means: Temperature 2) S means: stress screening 3) R means: external conditioning 4) -30 means: lower temperature -30 °C 5) 1000 means: 1000 liter test chamber volume Technical performance data: A) TSR-30/1000 basic device without hose connections, i.e. when used as a stand-alone temperature test chamber Temperature tests: Temperature range -40°C to +180°C Final temperature -45°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 6.0 K/min Cooling 5.0 K/min Heat radiation approx. 5000 W at +20°C approx. 4200 W at ± 0°C approx. 3000 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Air volume flow approx.2000m³/h B) TSR-30/1000 basic unit with hose connections, for connection to an external test room provided by the customer Temperature tests: Temperature range -30°C to +170°C Temperature deviation ≤ ±0.1 to 0.5 K in time Average rate of temperature change, measured with short-circuited circuit Heating 4.0 K/min Cooling 4.0 K/min in the range from +150°C to -10°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment, measured with short-circuited circuit Attention: The external test chamber provided by the customer must be absolutely tight and appropriately insulated, any feed-throughs must be optimally sealed on site. Dimensions: Test volume 1000 liters Air circulation connection Ø 200 mm Test chamber dimensions Height 900 mm Width 1000 mm Depth 1100 mm External dimensions Height 1950 mm Width 1270 mm Depth 2245 mm Technical design: Refrigeration unit: water-cooled, low-noise, fully hermetic Infinitely variable capacity adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: Fully opening door, door hinge on the left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 mm Max. load per shelf 35 kg Total load with max. shelf load 100 kg Test area lighting: Halogen lamp 20 W, 12 V Control: - 32 bit controller - LCD control panel Njdpfxsrivfcj Aansdf Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 13.3 kW Protection class IP 22 Sound pressure level < 60 dB(A) Weight approx. 850 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch temperature test chamber water-cooled Temperature range -70°C to + 180°C Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature deviation in terms of time ± 0.5 to ± 2.0 K Temperature change rate cooling 5.0 K/min Temperature change rate heating 6.5 K/min Heat compensation +20°C 3000 W Thermal compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 765 mm Height 750 mm External dimensions: Width 870 mm Depth 1595 mm Height 1775 mm Test chamber volume 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free-field measurement) < 69dB (A) Lateral feed-through 5.5 cm / 12.5 cm Cabinet is water-cooled Refrigerant: R- 404A and R 23 Weight approx. 570 kg Nedpfx Aoun Rv Nsanodf The following information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Keysight / Scienlab Battery Test System SL1001A + Angelantoni Climate Chamber DM500 C 10 ESS SPEEDY BT SP Complete Battery Testing System – For Laboratory Use Incl. PC, software & technical documentation For sale is a professional battery test system, consisting of: - Keysight / Scienlab SL1001A Battery Test System - Angelantoni DM500 C 10 ESS SPEEDY BT SP Climate Chamber - Monitoring/Sampling Unit - Control PC with original software - Technical documentation The system is fully functional, well-maintained, and ideally suited for battery module testing, research, development, and quality assurance. Technical Data – Scienlab SL1001A: - Manufacturer: Keysight / Scienlab - Model: SL1001A - Year of manufacture: 2020 - Voltage / Current / Power: 80 V / 600 A / 24 kW - Dimensions (L×W×H): approx. 1.6 × 0.9 × 3.3 m - Weight: approx. 700 kg - Function: Charging, discharging, and cycling of battery modules - Condition: Very well maintained, laboratory use only Technical Data – Angelantoni DM500 C 10 ESS SPEEDY BT SP: - Manufacturer: Angelantoni Industrie S.r.l., Italy - Model: DM500 C 10 ESS SPEEDY BT SP - Year of manufacture: 2019 - Weight: approx. 1,225 kg - Temperature range: -70 °C ... +180 °C - Humidity range: 10 ... 98 % rH - Refrigerants: R449A + R23 - Pressure ranges (PS Hi/Lo): 28 bar / 8 bar - Wi-Fi integrated - CE certification present - Internal dimensions (L×W×H): approx. 1.6 × 2.3 × 3.3 m - Function: Temperature and humidity testing, ESS (Environmental Stress Screening) - Power supply: 3PH + N + PE, 400 V ±10 %, 50 Hz, full load 54 A - Max. power consumption: 32.5 kW Monitoring / Sampling Unit: - Dimensions: 0.6 × 0.5 × 0.2 m - Measured variables: Cell voltages, current, temperature - Interfaces: CAN, Ethernet - Compatible with Scienlab / Keysight PathWave software PC + Software + Documentation: - Industrial PC with control and measurement software - Enables automated test runs, logging, and data analysis Overall Dimensions / Weight (approx.): Component Dimensions (L×W×H) Weight Scienlab SL1001A 1.6 × 0.9 × 3.3 m 700 kg Njdpfxexuqk He Aanedf Angelantoni Chamber 1.6 × 2.3 × 3.3 m 1,225 kg Monitoring / PC 0.6 × 0.5 × 0.2 m 50 kg Total system L 3.2 m × W 2.5 m × H 3.3 m approx. 1,975 kg Applications: - Development, testing, and lifespan analysis of battery modules (e.g., Li-ion, LFP, NMC) - Fast charging and cycle tests - Environmental simulation for temperature and humidity - Research, industrial, and university laboratories Important Note: "The table shown in the photos is not included in the sale." Scope of Delivery: - Scienlab SL1001A power unit - Angelantoni DM500 C 10 ESS SPEEDY BT SP climate chamber - Monitoring/Sampling unit - Control PC with software - Technical documentation and manuals - Connection cables and accessories (as available) Condition: used Scope of delivery: (see image) (Specifications and data are subject to change and error!) For any further questions, we are happy to assist you by phone.

Condition: excellent (used), Weiss Model: WKL 34/40 Weiss Climate Chamber, Air-Cooled -40°C to 150°C Chamber volume: 34 litres Feedthroughs included as standard: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm, Width 324 mm, Depth 300 mm External dimensions: Height 1740 mm, Width 630 mm, Depth 970 mm Specifications for temperature testing: Temperature range: -40 to +150 °C Temperature deviations at steady state (according to IEC 60068-3-5): Temporal fluctuation in centre of usable space: ± 0.3 to ± 1 K, ± 1 to ± 2 K Spatial deviation (temperature gradient): 2 to 4 K Rate of temperature change (according to IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3.5 K/min Max. heat compensation: 800 W Specifications for climate testing: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % RH Ndedpfxexvpp Rj Aanef Temperature and humidity fluctuations (at steady state, according to IEC 60068-3-5): Temperature fluctuation (temporal, centre of usable space): ± 0.3 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K (temperature gradient): 1 to 3 K Humidity fluctuation (temporal, centre of usable space): ± 3 to ± 5 % RH Operating data: Test chamber lighting: Halogen bulb 12V, 20W Rated voltage: 1/N / PE AC 230 V ± 10 %, 50 Hz Rated power: 1.8 kW Rated current: 8.0 A Protection (on site): 16A slow-blow Heat output (air-cooled test chambers): Max. heat emission to environment: 800 W Refrigerant: R-404A Weight: 110 kg Important notice: “The table shown in the photos is not included in the sale.” For your safety as a buyer, please note the following: The following procedures are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see photo) (Technical data and specifications subject to change and error!) If you have any further questions, we will gladly answer them by phone.

Condition: excellent (used), Here we offer a temperature test cabinet. Water cooled Temperature range: -45°C to +180°C External dimensions: Width 1300 mm x height 2100 mm x depth 2250 mm Test chamber dimensions: Width 840 mm x height 840 mm x depth 840 mm Unit part : width 2300 mm x height 2000 mm x depth 1300 mm Average heating rate: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Ndedemn Rciopfx Aanef Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Type: VTS 600/45 RS Refrigerant: R452 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a temperature shock test cabinet. Ndsdelgux Aepfx Aanof White Temperature Shock Test Cabinet Air Cooled Specification: Temperature range hot chamber +60°C ... +220°C Temperature range cold chamber -10°C ... -80°C Change hot/cold chamber 10 s Temperature constancy ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width ( without and with door hinge ) without....approx. 1820 mm with....approx. 1850 mm Depth ( without and with test room door ) without....ca. 900 mm with....ca. 1155 mm Dimensions of the lifting basket ( test chamber ) height 450 mm, width 500 mm, depth 600 mm volume 130 liters Test space load max. 20 kg Test chamber floor load max. 20 kg Cooling water pressure min. 2 ... max. 6 bar Max. Backup fuse 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of unit approx. 65 dB(A) Cooling cascade water cooled Connected load: 3/N/PE/AC 400V ±10% 50Hz /14,0 kW nominal current 26,0 A Refrigerant R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Zwick / Roell Temperature chamber for AllroundLine Here we offer you a Zwick / Roell temperature chamber for AllroundLine. Nodpek Rutpjfx Aanodf Description: Zwick / SFL Severn Furnaces Limited Zwick/Roell temperature chambers for tests in the temperature range - 80°C to + 250°C Traceable test results and perfect integration of the temperature chamber into the test system. External dimensions: Depth 1050 mm Width 600 mm, Height 800 mm Internal dimensions: depth 530 mm width 450 mm, height 650 mm Temperature chambers for the AllroundLine Cooling by means of LN2(liquid nitrogen) -80°C connection to external, is not included) Type: EC75A-1-0-1-0 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Feutron Type: 3702/06 Water-cooled climatic test chamber Technical data: Nedpfxjk E Hnqo Aanjdf Test chamber nominal volume 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width 2970 mm Height 2370 mm Depth 1530 mm Rear wall Minimum insertion dimensions: Width 2970 mm Height 2390 mm Depth 1550 mm Test chamber: Width 2000 mm Height 1000 mm Depth 1000 mm Double-leaf door, clear width Width 2000 mm Height 1000 mm Heated viewing window, 2 pieces Width 500 mm Height 600 mm Feed-through opening, 1 side panel left ∅ 75 mm Temperature range: -40...100°C Climatic range: 10...95°C Temperature difference, temporal ≤ ± 0.5...± 1.0 ΔN/K Change rates measured in the supply air without load Cooling up to 2.0 on average K/min Heating up to 2.0 on average K/min Humidity range: 10...95 %r. F. Humidity difference, temporal ≤ ± 3.0 %r. F. Dew point range, temporary down to -5... 95°C Refrigeration system: water-cooled semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Air conditioning and dryer refrigeration system air-cooled /hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical mains connection: 400V 3/N/PE.AC,50Hz Mains plug: CEE 5-роlig, 32 A, with 5.0 m cable Max. simultaneous power requirement 10.0 kW Supply line fuse: 3x 25, Char, C A Degree of protection IP20 Weight: 1300 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: C-40/350 CTS air-cooled temperature test chamber Test chamber volume 350 liters Test chamber dimensions: Height 750 mm Width 650 mm Depth 720 mm External dimensions: Height 1800 mm Width 850 mm Depth 1640 mm Design: Floor-standing appliance Temperature working range: Temperature range -40°C/+180°C Cooling speed: 4.0 K/min Heating speed: 3.0 K/min Electrical connection: 400V +6-10 %, 3/N, 50Hz Connected load: 5.5 kW Rated current: 8.3 A Condenser refrigeration machine: Air-cooled Refrigerant: R-404A Weight: 550 kg Ndjdpjg Sr Egefx Aanof The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), RS simulators Here we offer a temperature test cabinet. Air cooled Temperature range: -50°C to +100°C Test chamber dimensions: Width 520 mm x height 520 mm x depth 500 mm External dimensions: Width 820 mm x height 1750 mm x depth 1300 mm current consumption: 13,5 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 800 kg Type: TS 150/45 (50) Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, information are reserved!) Ndsdpfx Aajgl Acrenjf Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer shock test chamber. Temperature shock test chamber water cooled Two-chamber design Warm chamber: Temperature control of the warm chamber ranges from +50°C to +220°C Temperature deviation temporally in useful chamber center ± 1 K Temperature deviation spatially ± 2 K Temperature change rate Ndjdpfx Aaji Az Egonef heating 11 K/min cold chamber: the cold chamber from -65°C to +70°C Temperature deviation temporally in useful space center ± 1 K temperature deviation spatially ± 2 K Temperature change rate heating 2 K/min cooling 3 K/min Test chamber volume 125 liters Temperature range hot chamber +50°C to +220°C Temperature range cold chamber -80°C to +70°C Test chamber dimensions width 470mm depth 650mm height 410mm Outer dimensions width 930mm depth 2115mm height 1970+mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant R404A / R23 Operating hours: 27.903 hrs. Weight: 1000 kg For you as a buyer, the following information for your safety! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: HT 7012 S2 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), White temperature shock test chamber Here we offer a temperature shock test chamber. Weiss Temperature Shock Test Cabinet Water Cooled Specification: Temperature range hot chamber +60°C ... +220°C Temperature range cold chamber -10°C ... -80°C Change hot/cold chamber 10 sec. Temperature constancy ±1 K Dimensions and further data: External dimensions: Height 1990 mm Width ( without and with door hinge ) without....approx. 1820 mm with....approx. 1850 mm Depth ( without and with test room door ) without....ca. 900 mm with....ca. 1155 mm Dimensions of the lifting basket ( test chamber ) height 450 mm, width 500 mm, depth 600 mm volume 130 liters Test space load max. 20 kg Test chamber floor load max. 20 kg Nsdpfxsm Ak H Hj Aansdf Cooling water pressure min. 2 ... max. 6 bar Max. Backup fuse 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of unit approx. 65 dB(A) Cooling cascade water cooled Connected load: 3/N/PE/AC 400V ±10% 50Hz /14,0 kW nominal current 26,0 A Refrigerant R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a Köhler salt spray chamber. Salt spray chambers: diverse testing possibilities from salt spray test to fully automatic alternating test Ndjdponr Hi Sofx Aanof easy operation by graphical menu guidance customized versions for many applications easy operation via touch panel internal dimensions W x D x H (without hood) 1080 x 675 x 580 mm external dimensions W x D x H 1940 x 900 x 1220 mm Test chamber capacity 500 liters Chamber temperature Rt +5 - 60°C Humidifier temperature Rt +5 - 75°C Mains connection 230V 1P 50/60Hz 2000W Compressed air 4,5 - 8.0 bar / 3Nm³/h Brine supply 140 liters Stainless steel version Refurbished and converted to Comfort control - Renewal of all electrical components - Renewal of all hose connections Type: HK 500 400 Kg Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.