Used Cut Length for sale (39,633)

Year of construction: 2017, condition: excellent (used), Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specifically designed for the precise and reliable cutting of stainless steel pipes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser marking detection. The control panel allows you to choose whether the cut is triggered mechanically (e.g., on the back of a union nut) or fully automatically via the optical detection of a laser marking applied to the pipe. Thanks to the integrated rotating 3-jaw cutting head and a micro-spraying unit (minimum quantity lubrication), the processing is extremely tool-friendly. The pipes remain almost completely dry and free of coarse contamination. The entire process, from loading to clamping, cutting, and unloading, is highly automated and carried out in a material-saving cycle. Fully integrated labeling & traceability system: The system is designed for modern quality standards (Industry 4.0 / Automotive). After the cutting process, the barcode label is automatically generated, assigned, and printed for complete part traceability (traceability & system logging directly integrated). Due to two separate box output stations (rear sluices with sliding doors), the system automatically switches to the second station when a box is full. The removal of the finished KLT boxes takes place in parallel with the main operating time without machine downtime. Advantages of the Vario cutting head series compared to conventional cutting methods Shortest changeover times in non-cutting separation Material-saving and free of contaminants Chip-free Easy to maintain No cooling and lubricating agents required Short processing times Cuts all common materials Can be combined with common pipe magazines or from a coil Special designs are possible Technical data & capacities Maximum pipe length (feed): 1,000 mm Material specification: Optimized for stainless steel pipes (also with pre-assembled union nuts or crimped ends) Guodpfxezw Ukcs Ap Doh Sensors & positioning: Optical sensors for the automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feed (for manual or automatic loading) Length adjustment: Manually adjustable to different pipe lengths using a mechanical handwheel Cutting method: Chip-removing sawing / Rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant system: Integrated micro-spraying unit (MMS) for minimum quantity lubrication Control: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard and mouse Setup operation: Mobile Siemens Teach-In terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety polycarbonate windows Logistics / output Integrated box placement station 2 separate box output stations for rear removal via protected sluice systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario flex Special features: Pipes with union nuts Diameter Ø 6-76 mm Output length L = 150-1,000 mm Separation based on laser marking Wall thicknesses: 1 to 1.3 mm Condition: The system is in excellent optical and mechanical condition.

Condition: excellent (used), 527 USED Krumbein KSSM V0.1D pastry slicer. TECHNICAL DATA: - max product dimensions: 600 x 400 x 55 mm - adjustable cutting width - two-stage cutting: crosswise and lengthwise - power supply: 400V 3Ph 50/60Hz - weight: 165 kg Guodpfx Aezxrw Aop Dsh EXTERNAL DIMENSIONS (in cm): - W: 85 cm - L: 112 cm - H: 154 cm The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Year of construction: 2025, condition: new, Die-cutting machine ML-1200 NXL Brand new machine. This is the strongest die cutter in this format. Format: 1230 × 850 mm Weight: 5500 kg 380 V power supply Engine: 5.5 kW Guedjzwpxnepfx Ap Dsh Equipment: – electromagnetic clutch and brake – quick assembly frame – 3 operating modes: continuous, time delayed, manual – central lubrication – additional safety covers – operating tools and instructions with CE documentation. The machine is available „on the spot” We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Europe. Possibility of testing in the showroom in Radom.

Condition: excellent (used), CATALOGUE NUMBER 7678 Gjdpfxszulkzo Ap Dsuh TECHNICAL DATA - guide length 1670mm - cutting length 1500mm - automatic lubrication of the cutting system - damping and tensioning system in the head - manual guide feed - 7.5kW electric motor - transport dimensions (length/width/height) 1650x900x2350mm - total weight 240kg ADVANTAGES – Austrian-made – for sawing packs or round timber – unpainted – mobile, on wheels – used saw, very good condition Net price: 25900 PLN Net price: 6023 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Year of construction: 2012, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: G15035-DT -Drive motor: Siemens 2.2 kW Gujdpfx Aez A S Dnop Djh -Funnel opening: 620 x 350 mm -Outlet: 350 x 180 mm -Sieve: Hole size 5 mm -Dimensions: 650/630/H1240 mm -Weight: 192 kg

Condition: excellent (used), Year of construction: 1999, overall weight: 40 kg, total height: 105 mm, total length: 580 mm, total width: 110 mm, Metal cutting Tooling GRESSEL - Grefors 100mm Gujdpfx Apoz A Tu Ie Dsh MACH-ID 9709 Make: GRESSEL Type: Grefors 100mm Year: 1999 Length:580mm Width:110mm Height:105mm Weight:40kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), overall weight: 32 kg, total height: 125 mm, total length: 430 mm, total width: 130 mm, Metal cutting Tooling HILMA - TYP 125 MACH-ID 9714 Make: HILMA Type: TYP 125 Length:430mm Width:130mm Height:125mm Gsdpfsz Arhisx Ap Deuh Weight:32kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: reconditioned (used), functionality: fully functional, Usable cutting length: 4000 mm Godsz Dpzyepfx Ap Douh Pneumatic tilting of the saw heads Tilting range: 90-45° Blade diameter: 450 mm

Condition: reconditioned (used), functionality: fully functional, Wood-cutting miter saw with integrated dust extraction system. Gujdpfsz Dp A Rex Ap Doh Blade diameter: 350 mm.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Shanghai BOCHU Electronic Technology Co., Ltd, controller model: FSCUT 2000C, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: RFL-C3000, laser power: 3,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 3 mm, table length: 6,000 mm, table width: 1,500 mm, table height: 850 mm, working length: 6,000 mm, working width: 1,500 mm, working height: 120 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, feed rate X-axis: 128 m/min, feed rate Y-axis: 128 m/min, feed rate Z-axis: 30 m/min, cutting speed: 1,20,000 mm/min, positioning speed: 128 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 1,500 kg, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 4,500 kg, total length: 7,500 mm, total width: 2,500 mm, total height: 1,950 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, fume extraction, Special Offer – 5% Discount Available! CNC Fiber Laser Cutting Machine F6000 × 1500 – 3000 W The Metal Technics Polska F6000 × 1500 CNC Fiber Laser Cutting Machine is a high-performance industrial solution designed for fast, precise and cost-effective cutting of sheet metal. Equipped with a Raycus 3000 W fiber laser source, a WSX automatic-focus cutting head and the advanced BOCHU FSCUT 2000C control system with CypCut software, the machine delivers outstanding cutting quality, excellent repeatability and reliable operation in demanding production environments. Its large 6000 × 1500 mm working area allows efficient processing of long and oversized sheets, making it an ideal choice for steel fabrication, metalworking companies, engineering workshops and industrial manufacturers. The rigid, stress-relieved steel frame minimizes vibration, ensuring exceptional dimensional accuracy and long-term stability. Gujdpezkq S Nefx Ap Djh The automatic-focus cutting head continuously adjusts the focal position according to material type and thickness, reducing setup time, increasing productivity and maintaining consistent cutting quality. High-quality components, including Schneider Electric servo drives, Japanese THK linear guideways and an S&A industrial water chiller, guarantee reliable 24/7 operation with low maintenance requirements. The machine is suitable for cutting carbon steel, stainless steel, aluminium, brass and copper, producing clean edges with minimal finishing required. It combines high cutting performance with low operating costs, making it an excellent investment for businesses looking to increase productivity and expand their manufacturing capabilities. Every machine is supplied with installation, operator training, technical support, warranty service and comprehensive after-sales assistance provided by Metal Technics Polska specialists. Professional transport can be arranged throughout Europe and worldwide. The machine is available from stock and ready for immediate delivery. Contact us for pricing, delivery times or a personalized quotation.

Condition: new, functionality: fully functional, Year of construction: 2025, power: 60 kW (81.58 HP), warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, Laser source – MAX Photonics Table size – 4000x2000 mm Control system – FSCUT 6000 Software – Cypnest + Cypcut Water chiller – Hanli Model: GR 4020 Power: 60,000 W Laser source: MAX Photonics Table size Straight cut: 4100 x 2450 mm Bevel cut: 3750 x 1800 mm Control system Straight cut: FSCUT 8000 Bevel cut: FSCUT 9100 Software: Cypnest + Cypcut Laser head: Boci BLT6/BLT4 Nitrogen proportional valve: SMC Water chiller: Hanli Power stabilizer: 400 kVA Load capacity: Up to 5,000 kg Laser power: 60,000 W X/Y positioning accuracy: ±0.1 mm/m X/Y repeat positioning accuracy: ±0.05 mm/m Maximum travel speed: 80 m/min Maximum acceleration: 0.8 G CNC control: EtherCAT-BUS Power supply: 380V 50Hz three-phase Guodpsw Ix Dcjfx Ap Doh Servo motor power: X: 1.8 kW; Y: 5.5 kW*2; Z: 0.75 kW Power protection: Protection class IP54 External dimensions: 9700 x 4900 x 2350 mm Total machine weight: 12,500 kg Power consumption: 12kW: 78.25 kW/120 kVA 20kW: 112.25 kW/180 kVA Machine frame: welded steel Gantry crane: welded steel

Condition: new, functionality: fully functional, Year of construction: 2025, Tube laser cutting machine 6m/6m 6000/12000W Laser source: MAX Photonics Tube diameter: 20–350 mm Gedpfx Apowty R Ao Douh Laser head: Raytools BS12K straight 2D head 6000 mm automatic loading, 6000 mm unloading Three vertical chucks Servo-assisted unloading table CNC control: FSCUT5000 EtherCAT-BUS CAD/CAM software: TubesT, Tube Pro Load capacity up to 500 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: OPTIPLEX FIBER II 4020, Manufacturer: Mazak Model: OPTIPLEX FIBER II 4020 Year: 2016 Type: 2D fiber laser for sheet metal cutting Gjdpozg U Akofx Ap Djuh Design: Flying Optics Control: Mazatrol Preview G / Preview 3 CNC Laser source: Fiber IPG YLS/YDS Working area and dimensions of workpiece Maximum sheet size: 4000 × 2000 mm 157.5" × 78.7" Maximum sheet weight: 1600–1920 kg Axis ranges X-axis: approx. 4075 mm (160.4") Y-axis: approx. 2060 mm (81.1") Z-axis: approx. 110 mm (4.33") Number of controlled axes: 3 Speeds and accuracy Rapid traverse X/Y: up to 120 m/min approx. 4724 ipm Positioning accuracy: ±0.05 mm / 500 mm Axis drive: X/Y: rack and pinion Z: ball screw Resonator power: 6 kW Maximum cutting thicknesses For the 6 kW version: Material Max. thickness carbon steel up to 25–26 mm stainless steel up to 25 mm aluminum up to 25 mm copper up to 12 mm brass up to 12 mm Standard / optional equipment Typical equipment: automatic pallet changer (2 tables) Multi-Control Torch automatic nozzle change automatic focus adjustment piercing monitoring automatic head calibration collision sensors dust extraction intelligent cutting process monitoring

Condition: used, clear span: 3,600 mm, total length: 18,600 mm, total height: 5,000 mm, load per truss pair (max.): 4,000 kg, number of shelf rows: 1, Technical data for the pallet racking system: Racking system: Bito Type: PRO Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 18,600 mm Number of bays per racking row: 05 units, each 3,600 mm Number of levels plus base level: 02 units Included in the scope of delivery: 06x Pallet racking uprights, used Material color: sendzimir galvanized Upright profile: 100 x 65 x 2.0 mm Upright type: P3 Incl. cross and diagonal braces, Base plates The uprights are pre-assembled (bolted truss) 5,000 mm high 1,100 mm deep 20x Pallet racking beams, used Material color: blue Box profile: 150 x 50 mm Beam type: PT150S Clear span: 3,600 mm Max. load per beam pair: 4,000 kg with evenly distributed load 40x Locking pins, used Material color: sendzimir galvanized For securing the longitudinal beams against unintentional lifting 24x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 12x Shims, used Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately Gsdpsz Azktsfx Ap Dsuh depending on the delivery location or scope of delivery.

Condition: used, clear span: 2,700 mm, total length: 14,040 mm, total height: 4,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 1, Technical data for the pallet racking system: Racking system: Bito Type: Pro Gedpfxoz Aztho Ap Dsuh Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 14,040 mm Number of bays per racking row: 05 units, each 2,700 mm Number of levels including base level: 02 units Technical data for volume: Pallet spaces per bay: 09 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: not specified Weight per pallet (max.): 1,000 kg Included in the scope of delivery: 06x Pallet racking uprights, used Material color: Sendzimir galvanized Type: P 2 Profile dimensions: 90 x 65 x 1.75 mm Including cross and diagonal bracing, Base plates The uprights are pre-assembled (bolted framework) 4,500 mm high 1,100 mm deep 20x Pallet racking beam, used Material color: blue Box profile: 120 x 50 mm Beam type: PT120M Connector: 5 hooks Clear width: 2,700 mm Max. load per beam pair: 3,000 kg, with evenly distributed load 40x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal members against unintentional lifting 06x Upright protection, used Material color: yellow Overall height: approx. 715 mm Overall width: approx. 99 mm Internal width: approx. 92 mm Leg dimensions: approx. 65 x 65 mm Material thickness: approx. 3.5 mm Weight per unit: 4.96 kg Quantity: 01x / Pallet racking upright 24x Bolt anchor, new Manufacturer: Hilti Type: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 12x Shimming plate, used Material: Fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign With information on bay and shelf loads, Manufacturer and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), clear span: 2,775 mm, total length: 17,350 mm, load per truss pair (max.): 1,023 kg, Technical data for the pallet racking system: Racking system: Jung Heinrich Gujdpfx Apjz A D Dge Dsh Type: Esmena Technical data for the installation: Number of racking rows: 1 Length per racking row: approx. 17,350 mm Number of bays per racking row: 6, each 2,775 mm Number of levels including the base level: 6 Technical data for the capacity: Pallet spaces per bay: 21 Pallet spaces per racking row: 126 Total pallet spaces: 126 Based on: Load unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: not specified Weight per pallet (max.): approx. 341 kg Included in the scope of supply: 07x Pallet racking uprights, used Material color: RAL 5019 blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System hole pitch: 50 / 50 mm incl. cross and diagonal bracing, Base plates The uprights are pre-assembled (bolted truss) Height: 9,000 mm Depth: 1,100 mm 72x Pallet racking beams, used Material color: orange Box profile: 85 x 40 mm Beam type: GN85x41 Connector: 5 hooks Clear width: 2,775 mm Max. load per pair of beams: 1,023 kg, with evenly distributed load. 144x Locking pins, used Material color: Sendzimir zinc-plated For securing the longitudinal members against unintentional lifting out. 28x Bolt anchors, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, zinc-plated Approved for: cracked concrete 14x Shims, used Design: completely zinc-plated For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 37,000 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Laser power: 3,200 watts Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,250 mm Travel range, Z-axis: 115 mm Sheet thickness, structural steel max.: approx. 20 mm Sheet thickness, stainless steel max.: approx. 15 mm Sheet thickness, aluminum max.: approx. 8 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Total connected load approx.: 88 kVA Machine hours: 74,000 h Beam hours: 37,000 h Dimensions & Weight Footprint: 8,660 x 6,110 x 2,700 mm Machine weight: approx. 7,300 kg EQUIPMENT Closed machine frame with integrated laser unit Automatic pallet changer TFT color screen Positioning laser diode Spray device Motion unit for high-precision machining Additional high-dynamic Yp axis Drives with maintenance-free three-phase servomotors Closed beam guidance Conveyor for small parts and waste TRUMPF laser CO2 laser TruFlow 3200 High-frequency excitation Low-maintenance turbo radial blower Gas mixer (integrated) Laser power control Laser logbook function Laser cutting head with 5" lens Laser cutting head with 7.5" lens Universal quick-change device ControlLine Gsdpfxoz A D Irs Ap Douh Control system SINUMERIK 840D Automatic shut-off ContourLine SprintLine Teleservice Microweld RJ45 network connection Network connection via telediagnostics CE marking Light barriers Multi-chamber extraction system Compact dust collection system

Condition: used, Year of construction: 2015, Bystronic BySprint Fiber 4020 – Laser cutting machine Working area: 4064 x 2024 mm Laser power: 6000 W Gujdpfx Ajz Da Iqjp Djh - Bystronic ByVision CNC control system - 15" TFT-LCD control panel - Operating hours: 25,076 h - Cutting hours: 10,728 h - Year of manufacture: 2015 Technical data - Laser source: Fiber laser - Laser power: 6000 W - Working area: 4064 × 2024 × 70 mm - X-axis travel: approx. 4000 mm - Y-axis travel: approx. 2000 mm - Z-axis travel: 70 mm - Maximum sheet thickness steel: 25 mm - Maximum sheet thickness stainless steel: 30 mm - Maximum sheet thickness aluminum: 30 mm - Maximum sheet thickness copper: 12 mm - Maximum sheet thickness brass: 12 mm - Electrical connection rating: 22.7 kVA - Machine dimensions (W x H x D): 13700 x 2565 x 6670 mm - Machine weight: approx. 15,000 kg

Year of construction: 2007, condition: used, functionality: fully functional, The ELDAN FG952 is an industrial, high-speed, single-shaft granulator designed to further reduce the size of materials after primary shredding, down to a specified granule size. The material is fed into the cutting chamber, where a rotating rotor with moving blades interacts with stationary blades. The granulated material passes through a replaceable screen, allowing for the selection of the desired final fraction size. The unit features an adjustable blade gap, multiple blade sharpening options, easy blade replacement, and a hydraulic opening for the feed hopper, which facilitates access to the cutting chamber during maintenance. Replaceable wear parts and screens with different hole sizes are used. Electric motor power: 75 kW / approximately 100 HP Rotor length: 950 mm Rotor speed: 475 rpm Moving ("flying") blades: 12 pcs. Stationary blades: 4 pcs. Capacity up to 3,500 kg/h Guedpfxjz Dgrve Ap Dsh Approximate weight 4,400 kg Length: 1,940 mm Width: 1,960 mm Height: 2,800 mm Motor rated speed: 1,480 rpm Standard electrical grid: 3 phases, 400 V, 50 Hz The FG952 can be used to granulate various materials, including: tires and rubber; electrical and other cables; aluminum scrap; plastics; various secondary raw materials after primary shredding.

Condition: used, Used Urschel cutting machine, built entirely in stainless steel This Urschel cutting machine stands on castors and is built in stainless steel. Product travels from the hopper into the cutting section; whatever has been cut leaves the machine on the other side through the discharge chute. Drive is by electric motor and belts, and the controls sit in their own box on the machine. The type plate is missing, so the year of manufacture and the exact type are not known. Testing with your own product can be arranged. Located in Emmeloord, the Netherlands. Immediately available, price on request. Guedpfxoz Ndk Hs Ap Deh More photos and full specifications: / Type: Cutting machine Infeed: Hopper Drive: Electric motor with belt drive Controls: Own control box on the machine Construction: Stainless steel, on castors

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, total length: 8,200 mm, total width: 3,800 mm, overall weight: 5,250 kg, Tiltable automatic float glass cutting table for jumbo sizes : 6000 x 3210 mm Gsdpfoz N Dquex Ap Douh min. glass size : 350 x 180 mm glass thikness : 2,3 - 19 mm This table has NO option for low e deletion

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 76-1302, overall weight: 7,900 kg, input voltage: 380 V, input frequency: 50 Hz, Schneider CNC die-cutting machine, Type 2032, with vibrating table, Type 3041 For sale is a high-performance CNC die-cutting machine from the Swiss quality manufacturer Schneider Maschinenbau AG, including a vibrating table, Type 3041. The system is ideally suited for processing and die-cutting cardboard, corrugated cardboard, and packaging materials. Thanks to its robust industrial design, the precise NUM-750 CNC control system, and the automatic material handling, the machine still offers an economical solution for many packaging and display applications today. Technical data, Schneider Type 2032 Year of construction: 1992 CNC control: NUM 750 Power: 28 kW Voltage: 380 V / 50 Hz Operating pressure: 100–240 bar Machine weight: approx. 7,900 kg Swiss Made Vibrating table, Type 3041 Year of construction: 1986 Power: 3 kW Weight: approx. 1,600 kg Equipment CNC-controlled die-cutting system Hydraulic clamping system Automatic material feed Pneumatic hold-down devices Includes vibrating table Extensive conveying and feeding system Condition The machine comes from industrial use and can be inspected by appointment. Sale includes all existing system components as shown in the photos. Total weight of the system: approx. 9.5 tons Gjdoz R Dncjpfx Ap Douh Inspection possible at any time by arrangement. Loading and transport are the responsibility of the buyer.

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 6,000 W, Maximum laser power: 6 kW Cutting area: 3,060 x 1,530 mm Gsdpfx Ajz Iqb Asp Dsuh Positioning accuracy: 0.03 mm Maximum travel speed: 115 m/min Maximum acceleration: 0.8 G

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 200 h, laser type: fiber laser, laser hours: 200 h, laser power: 12 W, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 16 mm, Equipment: CE marking, cooling unit, documentation/manual, fume extraction, safety light barrier, Laser source power: 12 kW Maximum sheet size: 3000 x 1500 mm Maximum sheet thickness (carbon steel): 35 mm Gedpoz H Nybsfx Ap Dsuh Maximum sheet thickness (stainless steel): 30 mm Maximum sheet thickness (aluminum): 25 mm Maximum sheet thickness (brass): 16 mm Machine components: voltage stabilizer, 12000W laser resonator, light curtain safety barrier, compressor, extraction system. The machine can be viewed and tested in Komárno, Slovakia.

Year of construction: 2002, condition: used, Offered for sale is a CNC foam cutting machine. CNC control system with display, movable material table with guide rails, conveyor unit, electrical control cabinets with Lenze drive technology as well as safety fencing with safety light curtains. Inspection possible by arrangement. Gjdpfsz Rn D Uox Ap Douh