Used Cut Off Saw for sale (18,919)

Condition: ready for operation (used), Year of construction: 2017, Swift Jet Water Jet Cutting Machine Ex University Machine Cutting Area 1525 x 3050mm Z axis Clearance 220mm Tank Depth 840mm Water Pump Hypertherm HyPrecision 30Hp Positional Accuracy + - 0.015mm Traverse Speeds 15m/min Iodpfxjw Rg Sas Aabjbc Advanced nesting and cutting software Collision Protection, heavy duty build that will cut almost any material with no heat distortion. *For sale with Jet Machinery Ltd* Stock No: 78971 Serial No: 1160111 Price: £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2004, functionality: fully functional, cutting width (max.): 400 mm, cutting length (max.): 6,000 mm, total width: 5,400 mm, total length: 13,500 mm, total height: 2,500 mm, saw blade diameter: 800 mm, type of input current: three-phase, rotational speed (max.): 800 rpm, DePauw QCUWSCNC18 Double Cut Cross Saw, manufactured in 2004. Fully functional and well maintained, suitable for immediate use in production. Cutting width: 400 mm Cutting length: 6,000 mm Total machine dimensions: 13,500 mm (length) × 5,400 mm (width) × 2,500 mm (height) Rear saw blades: 800 mm diameter, maximum speed 1,500 rpm Front saw blades: 500 mm diameter, maximum speed 3,000 rpm Saw type: Double Cut Cross Saws Condition: Used, fully operational. Location: Cork, Ireland Ijdpfew Nbhmex Aabebc Delivery available at buyer’s expense. Price: €25,000 Contact for more details or to arrange a viewing.

Condition: not inspected (used), for fast, exact cross-cutting of several timbers at the same time, which can be placed next to and/or on top of each other, max. travel approx. 3.3 m, total table length approx. 4.15 m, total table width approx. 0.85 m, max. clamping height approx. 160 mm, max. timber width approx. 220 mm, positioning drive with 2 electric disc brakes, positioning slide can be swivelled upwards, with 2 pneumatic clamping tongs with 4 spring-loaded clamping fingers each from above, 10 clamping tines from below, for self-assembly on a cross-cut saw Ibsdpoiqn D Dsfx Aabjc

Condition: good (used), Code: 0228 Brand: OMS SALVARANI Model: 300 INVINCIBILE Pneumatic double croscutting machine for cutting wood, frames, fixtures, joinery, furniture, and various other materials Technical data: Working length mm 3000 Blade diameter mm 300 Motor power Hp 2,5 - Rpm 3000 Manual movement of the 2 heads Cutting from 0 to 45° right and left Pneumatic pedal for lowering the heads N° 2 pneumatic clamps for locking workpieces Ibjdpfexnxumex Aaboc N° 2 suction ports diameter mm 50 Compressed air 6 bar Overall dimensions mm 4000 x 700 x 1250 h Weight kg 520

Condition: excellent (used), Double miter saw Pertici Haffner DGS180 Cutting length: 3300 mm Iedpfx Aaoxg Hanobebc Cutting width: 140 mm Two adjustable cutting angles Maximum saw blade diameter: 330 mm Pneumatic material clamps 3 operating modes

Year of construction: 2025, condition: used, comprising: 1 SYSTEMATIC AW-12 infeed system, year of manufacture: 2004, serial no.: 040451; double-end profiler HOMAG Profi FL 20/07/15/S, year of manufacture: 2002, serial no.: ; 1 longitudinal cutting line KRAFT, year of manufacture: 2002, serial no.: 124607600; 1 destacking system KRAFT PM 1800/8 AR-17, year of manufacture: 2004, serial no.: 04046 Isdpfx Aaexnacxjbobc

Condition: new, Year of construction: 2025, Crosscut and Mitre Circular Saws Type ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Precise ball bushing guidance of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard connectable to extraction system Machine mounted on mobile machine base with 1.5 m long roller conveyors on both sides (left and right) Left side equipped with scale and stop slider Technical Data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm (not included as standard) Ibjdpsw Hl Aqofx Aaboc Extraction port 100 mm Weight 490 kg Location: In stock at 54634 Bitburg - Immediately available - On request, we are happy to offer the saw blade as well.

Condition: used, cutting width max. 250 mm Cutting height max. 80 mm Saw blade diameter 400 mm Motor output 3,0 kW turning speeds 2800 U/min Required air-pressure 6-8 bar work height max. 900 +-20 mm mm Dimensions (L/W/H) 530x869x1217 mm SALVAMAC Legend 400 – The semi-automatic chop saw ----- - Maximum cutting area: 220x80/ 250x50 mm. (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Motor power of the saw motor 3.0 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to minimize vibrations and ensure worker safety to improve. HM circular saw blade, diameter 400 mm, Z=96. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: ----- Saw cross section max. 220x80/ 250x50 mm Saw blade motor power: 3.0 kW Saw blade diameter: 400 mm Saw blade type: HM Z=96 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 ----- Total price ex works: on request! ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) - Movable front protection and more on request! Ibjdpfx Aasxmk Ddobsc ----- (technical data according to the manufacturer without guarantee!)

Condition: good (used), Original – Stop system with coupling element for an LTS 400 / 460!! and stop extension for cutting short pieces --- Roller width 400 mm --- Heavy-duty stop, can be swung up ---- 1 piece for measuring or part lengths up to 2000 mm and 1 piece for measuring or part lengths up to 3000 mm in stock Isdpfoxlufcsx Aabebc

Condition: good (used), Code: 0370 Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Technical data: Blades diameter mm 500 F 30 N° 2 motors each Kw 2,2 - Rpm 2800 Cutting length max mm 3400 Cutting length min mm 230 Blades inclination 45° - 90° Electronic positioning cutting length of left cutting unit Isdpfxouiwqhe Aabebc Hydropneumatic saw feed Pneumatic workpiece clamping Control panel double buttons Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

Condition: excellent (used), functionality: fully functional, cutting height (max.): 100 mm, cutting width (max.): 150 mm, cutting length (max.): 352 mm, total width: 800 mm, total length: 4,150 mm, total height: 1,300 mm, saw blade diameter: 330 mm, overall weight: 600 kg, type of input current: three-phase, disc diameter: 330 mm, rotational speed (max.): 2,800 rpm, BLITZ 330-L double mitre saw for wood, aluminium Specification: • Condition – used, after inspection/service • Manufacturer – BLITZ Isdexl Eadopfx Aabsbc • Model – 330-L • Main motors – 2 x 1.5 kW and 2,800 rpm • Pneumatic head control • Max. cutting length – 352 cm • Min. cutting length – 38 cm • Max. cutting cross-section – 100x150 mm (at right angle) • Max. blade diameter – 330 mm • Spindle axis – 20 mm • Miter cutting range – from -45 to +45 degrees (right, left) • Vertical workpiece clamps • Weight – approx. 600 kg • Overall dimensions – 415 x 80 x 135 cm (L x W x H) Additional information: • Very good, factory technical condition • Photos shown reflect the actual condition of the item for sale • Possibility to power up and test the machine on site

Condition: good (used), Saw blade Ø 500 mm, cutting height approx. 160 mm, cutting width approx. 550 mm, saw motor 3 kW, upper saw section swivelling for bevel cuts with locking mechanism, cutting depth adjustment via spindle ratchet, with new 500 mm Ø CV saw blade Ibodpfxsvl E Nij Aabsc

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 5613, panel saw with diamond blade in good condition Isdpsxnm U Uefx Aabobc

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Storage location: Nattheim Isdjw Sy T Hepfx Aabsbc

Condition: used, Parts for PMC 12 - or - for LKH 310 - Clamping elements Iodpfxsxf H Ucj Aabsbc - Saw blade guiding elements

Condition: good (used), Code: 0065 Brand: STOERI MANTEL - CZECH REPUBLIC Model: KP 500 OPTIM - CE Standard Electronic pusher cut-off line with optimisation and defection of wood, suitable for joinery workshops, wooden joinery, semi-finished wood products, furniture, wooden packaging, garden furniture, parquet, and various - CE Standard Blade diameter mm 500 F30 Max revolutions 5000 Motor power Hp 7,5 Adjustable displacement speed Adjustable blade height Max precision tolerance +/- 0,5 mm Frontal pneumatic workpiece holding pressure Integrated control panel Control software SM OPTIMAL Working table height mm 850 Max cutting height mm 130 Loading device Table loading capacity up to mm 6000 Working table inclination 8° Ijdpev Rf Agefx Aabjbc Movement speed mt/min 0-15 Return movement speed mt/min 0-100 Control unit AC SERVO Linear axis with integrated toothed belt Outfeed table Outfeed table length mm 2500 Workpiece ejector Suction ports N° 2 diameter mm 120 Compressed air 8 bar Overall dimensions of assembled machine mm 8300 x 1000 x 1700 h Overall dimensions for transport : Machine mm 1100 x 1150 x 1700 h - Pusher mm 6800 x 800 x 1200 h - Outfeed table mm 2550 x 550 x 900 h Weight kg 1500

Condition: new, Year of construction: 2019, functionality: fully functional, I am offering a new, originally packaged saw for sale. Ibedpfx Aewxr Dxeabec

Condition: new, cutting diameter 240 mm saw band length 2730 mm cutting width 270 mm cutting speed 37 + 74 m/min dimensions of saw-band 2730 x 27 x 0,90 mm 240 mm 230 mm 270 x 230 mm 210 mm 200 mm 200 x 210 mm 130 mm 130 mm 130 x 160 mm total power requirement 1,2 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 1,6 x 1 x 1,7 m high-quality processed metal band saw with 2 band speeds, miter up to Ibodohhzl Hspfx Aabsc 60°, automatic cooling and AutoCut feed system - for sawing solid material and profiles execution * High-quality processed and equipped metal band saw for saw cuts best quality * For sawing solid material and profiles made of steel, stainless steel and aluminium * Miter cuts up to 60 degrees left * Saw band speed adjustable in 2 stages * Frame and gearbox made from one piece, very quiet and low-vibration cut * Easy, clear miter adjustment with scale * Quick release vice with quick release lever for easy handling * Length stop * Carbide saw band guide * Electrical monitoring of band tension, band breakage and saw band cover. The saw only runs if there is no fault in the monitoring system. * Ergonomic industrial handle * Electric automatic coolant control * AutoCut system with hydraulic cylinder, feed control, spring pack and limit switch * Large machine bed * Machine base in sheet steel construction with front door AutoCut system * Automatic saw frame lowering via the hydraulic cylinder continuously adjustable feed and limit switch at the end of the cut. * High-speed lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed (e.g. for scribing). * Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for release). Due to the brake cylinder, the saw can be moved in any Position to be positioned.

Condition: used, cutting width max. 610 mm Cutting height max. 150 mm Saw blade diameter 600 mm Motor output 9,2 kW turning speeds 2750 U/min Required air-pressure 7 bar work height max. 900 +- 20 mm Dimensions (L/W/H) 770x1385x1370 mm SALVAMAC Legend 600 the semi-automatic chop saw ----- - Maximum cutting area 420x150/520x100/610x30 mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 9.2 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to minimize vibrations and ensure worker safety to improve. HM circular saw blade, diameter 600 mm, Z=132. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: ----- Saw cross section: 420x150/520x100/610x30 mm Saw blade motor power: 9.2 kW Saw blade diameter: 600 mm Saw blade type: HM Z=132 Saw blade rotation speed: 2750 rpm Air consumption per cycle: 7 Nl Intake nozzle: 2 x 140 mm Air pressure: 6 - 8 bar Ibsdpfx Aasvnv U Ujbec Voltage: V 400/50 Hz 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 ----- Total price ex works: on request! ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) - Movable front protection and more on request! ----- (technical data according to the manufacturer without guarantee!)

Condition: good (used), Code: 0206 Brand: CMS SCARPARI - ITALY Model: MI 120/EL Cut-off machine for wood parcel, trimming and sectioning timber bundles, used by packaging companies, pallets, crates, sawmills, timber merchants, framers, carpenters, window frames and various materials Cutting width mm 1200 Cutting height mm 1200 Motorised right loading roller conveyor length mm 4700 - width mm 1400 - height mm 1570 - controlled by inverter Ibedpexdcwdsfx Aabjc Central cutting unit with motor Hp 12,5 Lifting and lowering with self-braking gear motor Hp 1,5 Chain lubrication with hydraulic power unit Motorised unloading roller conveyor on the left - length mm 5300 - width mm 1400 - height mm 1570 Barrier unit for measuring and programming the measurements to be cut, with max stroke mm 2000 Belt for transport and evacuation of trimming scraps Compressed air 6 bar Suction mouth diameter mm 140 Overall dimensions of mounted machine mm 10000 x 2100 x 3300 h

Condition: new, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW Speed 2.800 U/min. Required air-pressure 6-8 bar Working height 900 +/- 20 mm Dimensions (L/W/H) 10645x1000x1300 mm SALVAMAC COMBO 500 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider ----- - Pos. 1: Legend 500 under table miter saw ----- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ----- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Iodevu Hd Tspfx Aabsbc Colour: Ral 7035 - Ral 1007 Pos. 2: Salvastop 100 electronic length stop ----- - - Working method: 2 modes 1 x stop (length stop moves to the specified length) and 1 x slide (several lengths are processed one after the other at the push of a button) - with servo drive - Ram speed: up to 60 m/min - slider length 600 mm - with a 7'' touch display - maximum weight of logs that can be pushed - up to 100 kg - USB connection COMBO_500 - 6400/7000 - Roller conveyor with guide to the right of the saw. Painted steel frame with galvanized castors. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT PROTECTION Movable instead of rigid front protection. The guard rises during cutting to ensure safe working conditions. Loading and unloading wood is simplified with the downward-facing guard. The system has another special, secured pneumatic system with linear guidance, which impresses with top quality and cutting-edge technology. SOFTWARE LINK FILES Preparation for data import via a Salvamac file template in CSV format. ----- Total price demonstration machine from stock 73447 Oberkochen: on request! ----- More options like longer/shorter inlet/outlet, Stop systems on re...

Condition: good (used), Code: 0323 Ibjdpfetu Hy Eex Aabjc Brand: SML - ITALY Model: SILVER P 35/EL - CE Standard Electronic double mitre saw for cutting wood, frames, pvc, aluminium, plastics and various materials - CE Standard Technical data: Oleo-pneumatic head lowering Max cutting length mm 5200 Min cutting length mm 50 Cutting height mm 100 Max cutting width mm 170 Blade diameter mm 350 F30 Motor Hp 3 each - Rpm 3000 Electronic head positioning programmer Bimanual blade lowering control Pneumatic pressures for workpiece clamping N° 2 suction ports diameter mm 60 Working pressure 7 bar Overall dimensions mm 6300 x 1000 x 1600 h Weight kg 1100

Condition: used, cutting width max. 330 mm Cutting height max. 150 mm Saw blade diameter 550 mm Motor output 7,5 kW turning speeds 2800 U/min Required air-pressure 6-8 bar work height max. 900 +- 20 mm Dimensions (L/W/H) 530x869x1217 mm SALVAMAC Legend 550 the semi-automatic chop saw ----- - Maximum cutting area 220x150/330x50 mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 7.5 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to minimize vibrations and ensure worker safety to improve. HM circular saw blade, diameter 550 mm, Z=96. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: ----- Saw cross section: 220x150/330x50 mm Saw blade motor power: 7.5 kW Ibodpfjvnv T Rox Aaboc Saw blade diameter: 550 mm Saw blade type: HM Z=96 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 ----- Total price ex works: on request! ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) - Movable front protection and more on request! ----- (technical data according to the manufacturer without guarantee!)

Condition: used, cutting width max. 375 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW turning speeds 2800 U/min Required air-pressure 6-8 bar Dimensions (L/W/H) 530x869x1217 mm SALVAMAC Legend 500 fast semi-automatic chop saw ----- - Maximum cutting area Option A: 220x125/310x50mm Option B: 350x80/375x50mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 5.5 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to minimize vibrations and ensure worker safety to improve. HM circular saw blade, diameter 500 mm, Z=108. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: ----- Saw cross section: Option A: 220x125/310x50mm Option B: 350x80/375x50mm Ibedpfsvnv U Isx Aaboc Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 ----- Total price ex works: on request! ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) - Movable front protection and more on request! ----- (technical data according to the manufacturer without guarantee!)

Condition: used, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw ----- ----- Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm. When sawing stacked boards h max. 100 mm. The structure is made entirely of thick-walled and reinforced throughout painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cutting control in ergonomic position. Isdov Uq Tlspfx Aabebc Engine power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balance and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different Types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. The CE models must come with it as standard At least 1 meter long support plates/roller tables must be provided at the inlet and outlet. Technical data: ----- Saw cross section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz, 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 Machine additionally equipped with: ----- 2 m infeed table (right of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. load capacity 230 kg, Diameter 60 mm, distance 250 mm, width 320 mm. The space between the roles is enclosed in painted steel. Including lateral guidance. 2 m outfeed table (left of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. Load capacity 230 kg, diameter 60 mm, distance 250 mm, width 320 mm. The space between the rollers is of enclosed in painted steel. Includes side guide, stop guide and millimeter scale. 2 pieces of strong pneumatic stops with a width of 200 mm ----- Total price ex works: on request! ----- Image and video not original, show identical model Further options such as longer inlet/outlet, stop systems on request! (technical data according to the manufacturer without guarantee!)