Used Cut To The Length Line for sale (55,934)

Condition: used, Manufacturer: Ergonomic 2 Manufacturer: Yung Nien Fa Power: 47.02 kW Press Intermediate feed conveyor Control panel Right-hand splicing machine with glue applicator Intermediate feed conveyor Crodpfjwtc Eisx Aizei Full cycle start/stop panel Moulding start, cycle stop panel Safety grid Left-hand splicing machine

Condition: used, Year of construction: 2007, operating hours: 15,000 h, functionality: fully functional, working range: 4,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, type of input current: AC, input voltage: 400 V, table length: 4,500 mm, table width: 2,000 mm, tank capacity: 8,000 l, pressure: 4,150 bar, operating pressure: 3,800 bar, input current: 84 A, power: 45 kW (61.18 HP), Waterjet cutting system CMS Tecnocut IDRA (predecessor to the Idroline series) 2 x 5-axis cutting heads (only 1 head is fully operational / head 2 is functional but lacks high-pressure/sand feed) Cutting head configuration as a 2D head with a 250 mm Z-axis travel range Cutting head configuration as a 3D head with a 150 mm Z-axis travel range, A-axis travel range +/- 274 degrees, B-axis +/- 62 degrees, full 3D control, not 2.5D like many other machines Cutting area: X-axis: 2,000 mm Y-axis: 4,000 mm Z-axis: 250 / 150 mm A-axis: +/- 274 degrees B-axis: +/- 62 degrees Credpfx Ajzbz Evsizji Details: - 5-axis cutting head with IKC technology (intelligent cutting head control for angle error compensation) - Anti-collision/height sensor for surface scanning - DDX EasyStone Premium software - 60 HP/45 kW Jetpower EVO pump (3-cylinder) with an output of up to 5 L/min / Maximum pressure 4150 bar / Normal operating pressure 3800 bar The machine is still in operation and connected to power until July 31, 2026.

Year of construction: 2008, condition: good (used), Linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis, short-stroke linear axis, linear motion rail guide, linear table, positioning table -Manufacturer: RK Rose Krieger, positioning table flat short-stroke linear axis for manual adjustment -Type: RK C 80/194 Crsdpfx Aisxln N Iszoi -Travel: 50 mm -Number: 3x linear axis available -Price: per piece -Dimensions: 305/80/H45 mm -Weight: 1.6 kg/piece

Condition: good (used), Linear drive, linear gearbox, lifting gear, transfer rail, conveyor rail -Linear drive: with toothed belt -Stroke: 2480mm -Drive shaft: hollow shaft Ø 14 mm Cedpfjii Sdzex Aizori -Note: without motor, can be included for an additional charge -Transport dimensions: 2800/150/H135 mm -Weight: 24kg

Year of construction: 2021, condition: used, Lumacon automatic crate filling line Automatically feeding of 4 crates/ boxes per cycle. When the weight has been reached the conveyor belts will remove the filled crates and prepare 4 empty crates for filling. - Complete with inclined conveyor belts - Buffer belts - Weighing belts - Multiple lines available from stock (Emmeloord) Credpfx Ajv E Irgsizei More photos and full specifications: /

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 94808190, cutting width (max.): 800 mm, overall weight: 2,500 kg, working width: 800 mm, EUROCUTTER 800 TMONITOR SP3 paper cutting machine, CE version. Technical specifications: Cedj Ahpnvepfx Aizori - Year of manufacture: 2024 - Maximum working / cutting width: 800 mm - Minimum cut: 25 mm - Control: 10.4-inch TFT-LCD touchscreen - Serial number: 94808190 - Net weight: 2,500 kg - Gross weight: 2,800 kg Equipment listed in the original supply specification: - 2 HSS blades - 2 TCT blades - 10 cutting sticks

Condition: used, Linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, roller guide rail, guide carriage, guide rail, rail guide for tool dispensing systems -Manufacturer: igus, linear drive type DryLin T from Achterberg Toolbase AK -Actuator: DLG 060-068.03 -Threaded rod: Ø 12 x 980 mm -Number: 8x linear drive available -Price: per piece Codpfxsu Sv Tvo Aizori -Dimensions: 1615/110/H120 mm -Weight: 5.5 kg/piece

Condition: used, Linear drive, linear gear, lifting gear, spindle drive, linear axis -Manufacturer: Festo, linear drive type DGE-25-500-SP -Stroke length: 500 mm -Servo motor: Festo type EMMS-AS-55-S-TM -Number: 5x linear drive available -Price per piece Crsdpfxeitv Dfj Aizji -Dimensions: 765/65/H150 mm -Weight: 5 kg/pc.

Condition: good (used), IR thermography system, brand: Thermo Sensorik Model: Thermo Spector Year of manufacture: 12/09 Scope of delivery: 1x InSb 640 SM thermographic camera (serial number 0001983179, format 640x512 pixels) with power supply and temperature display 1x Light box with power distribution unit and vacuum distribution unit on a motorized table, height-adjustable stand with cable winch for the IR camera Crjdpfx Aozcmldeizei 1x Thermal test plate (temperature-controlled solar cells - contact unit) with vacuum suction, temperature control unit and electrical excitation (thermostat and vacuum pump not included) 1x Control system includes: - LED matrix control - power supply for 6 LEDs (Thermo Sensorik LED Control Unit, S/N 000207013) - Power supply (Thermo Sensorik Power Supply + Multi-I/O-Box, S/N 000196029) - Power source (Höcherl & Hackl NL Series Source & Sink Model NL20V20C20) - Hardware includes a PC-compatible computer with camera interface, MPS5 software and Lock_In Suite software - Monitor, keyboard, mouse, manual

Condition: used, Automatic lattice girder welding line TE 30 S made by EUROLLS Model : TE 30 S Maximum stacking height : 500 mm Wire diameter - Upper current (ds -smooth or barbed) : From 4 to 12 mm - Lower current (di- smooth or barbed) : From 4 to 12 mm - Diagonal wire (dg- smooth or barbed) : From 3 to 8 mm Diagonal pitch (P) : 200 mm Beam pitch : 400 mm Maximum speed with hot and cold drawn wire : Max 30 m/min Maximum spool weight in feed : 3000 kg Machine type: TE 30 S Maximum stacking height: 500 mm Wire diameter Upper current (ds -smooth or barbed): From 4 to 12 mm Wire diameter Lower current (di- smooth or barbed): From 4 to 12 mm Wire diameter Diagonal wire (dg- smooth or barbed): From 3 to 8 mm Diagonal pitch (P): 200 mm Beam pitch: 400 mm Maximum speed with hot and cold drawn wire: Max 30 m/min Maximum spool weight in feed: 3000 kg Crodpjvtqacefx Aizji

Condition: like new (used), total length: 1,356 mm, total width: 640 mm, number of shelf rows: 1, frame height: 2,490 mm, support length: 1,300 mm, Technical data for the shelving unit: Shelving system: META Type: CLIP Technical data for installation: Number of shelving rows: 1 Shelving length: approx. 1,356 mm Number of bays per shelving row: 1, each 1,300 mm Number of levels including base level: 6 Included in the scope of supply: 02x shelving uprights, used Material color: blue Frame profile dimensions: 50 x 40 x 1 mm Adjustment grid: 25|25 mm Incl. base plates and partition strip The uprights are pre-assembled 2,490 mm high 640 mm deep 06x shelves, new (2nd choice) Shelf designation: MS150-III Material color: sendzimir galvanized Dimensions: 1,300 x 600 x 40 mm Max. load per shelf: 150 kg with evenly distributed load 04x leveling shims, used Dimensions: 76 x 58 x 2 mm Weight per piece: 0.064 kg Material color: sendzimir galvanized 24x shelf supports, new Weight per piece: approx. 0.014 kg Crjdpfezun N Tsx Aizsi Material color: sendzimir galvanized 01x cross bracing, used Material color: sendzimir galvanized 01x load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 297 x 210 x 2 mm General information about the item: This item is offered for pick-up only. Any further desired transport or shipment of this item will incur additional costs, which can be inquired separately depending on the delivery location or scope of delivery.

Condition: used, Bystronic Type: ERMM180 Thermoplastic Applicator Application Area The thermoplastic applicator applies a thermoplastic material to rectangular glass panes within a production line for solar modules. The material forms a seal to a second glass pane, which is applied in a later process step. The panes are fed in, the material is applied, and the panes are removed on horizontally running belts/conveyors. The thermoplastic applicator is a highly advanced machine that must meet many requirements with great precision. For this reason, you should only process raw materials (glass, sealant) that meet the specifications on the following pages. This helps to achieve a high-quality and safe production. Performance and Connection Values Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant bead: 0.5 to 1.2 mm Maximum width of the applied sealant bead: 12.0 mm Required constant inlet pressure, pneumatics: 6.5 to 8.0 bar Operating pressure, pneumatics: 6.0 bar Compressed air consumption, normal operation: 10 normal liters/min Compressed air consumption during drum change: 500 normal liters/min Average energy consumption per hour: 10 kWh Operating temperature of the sealant: 110°C to 130°C Ambient Conditions and Emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity: 75% Sound pressure level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material-lid container D18 according to DIN 6644 – with foot (F1) and smooth outer surface (body design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Processable glass panes Glass types Glass panes with a smooth surface (float glass) can be processed. Dimensions and weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastic materials based on poly-isobutylene (butyl) can be processed. The material must be flowable in the range of approximately 110°C to 130°C and have a defined viscosity curve. Only use materials that have proven themselves in practice and have been approved by the manufacturers of these materials and by Bystronic for your intended use. For detailed product descriptions and information on the handling, storage, and Cedpfxszdyh Ho Aizsri disposal of the material used, please refer to the information sheets and safety data sheets, which the manufacturers of the materials will gladly provide. Dimensions of portal robot with glass conveyor Height x Width x Depth: 2800 x 1890 x 2735 mm Weight of the portal robot: 850 kg Weight of the glass conveyor: 1400 kg Dimensions of drum pumps Height x Width x Depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H at drum pump FP1: 4400 mm Height H at drum pump FP2: 4000 mm Dimensions of control cabinet Height x Width x Depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with butyl material. Condition: used From a test laboratory, in new condition, only a few operating hours for testing! Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, electric spindle drive -Manufacturer: Geze, spindle drive type E250/24V-DC EV 1 Ovp -Ident.-No.: 16 473 -Stroke length: 300 mm -Network: 24 V DC -Shaft: Ø 20 mm -Number: 2x linear drive available -Price: per piece -Dimensions box: 670/60/H45 mm Crsdpsvu Rvtsfx Aizji -Weight: 1.8 kg/piece

Year of construction: 2002, condition: used, linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis -Manufacturer: RK Rose Krieger, linear unit -Type: 70230100700 210792 /10 -Travel: 500 mm Cedpeuzn Hmofx Aizsri -Shaft: Ø 8 x 25 mm -Dimensions: Ø 30 x 725 mm -Weight: 1.7 kg

Year of construction: 2002, condition: used, linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis -Manufacturer: RK Rose Krieger, linear unit -Type: 70130100700 210792 /20 -Travel: 500 mm -Shaft: Ø 8 x 25 mm -Dimensions: Ø 30 x 725 mm Crjdpfx Aijuzn Htszji -Weight: 1.7 kg

Condition: good (used), Heidelberg Cylinder SBD 64×89 Automatic Die Cutter The most sought-after machine on the market, in its late 2000s. Crsdpfx Aie Aaw Uaozei The machine is in very good condition and ready for operation. Format: 640x890mm The machine is ready for die cutting. Fully automatic, with smooth speed control, central lubrication, and safety guards. The machine features a quick-change carriage system on the infeed and a convenient cabinet on the side of the machine. Includes two frames, spare parts, a cylinder plate, carriages, and a large set of fillers and locks.

Condition: good (used), Year of construction: 2002, operating hours: 46,928 h, functionality: fully functional, total width: 1,400 mm, total length: 1,500 mm, total height: 1,400 mm, type of input current: AC, overall weight: 1,800 kg, input voltage: 400 V, Technical specifications of the JCP 45 in detail Parameter Specification / Value Rated power 45 kW Crodpfo Agvb Uex Aizsi Maximum pressure 4,000 bar (constant working pressure) Flow rate 4.7 l/min (up to 5 l/min at reduced pressure) Pressure ratio 1:13 to 1:16 (oil to water pressure) Maximum oil pressure 300 bar Pressure stages 2 pressure stages / continuously adjustable Electrical connection 3x 400V / 230V, 50Hz Required air pressure min. 6 bar (maximum 7 bar for control) Cooling system Oil-water cooling or alternatively oil-air cooling Noise level approx. 78 dB Dimensions (W x H x D) 1,500 x 1,400 x 1,400 mm Weight 1,800 kg

Condition: used, empty load weight: 7,000 kg, maximum load weight: 23,000 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/2021, loading space length: 8,100 mm, suspension: air, tire size: 235/75R17,5 --/140J, color: other, gearing type: other, front tire size: 235/75R17,5 --/140J, rear tire size: 235/75R17,5 --/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading platform length approx. 8,100 mm, loading height approx. 890 mm, lashing rings, -- misprints, errors and changes reserved, sample images --, More data at: !, More Details: ! Cedpfs Afcw Rex Aizori

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, CNC waterjet cutting machines PB-C 4020 COMBI X working area max.: 4000 mm Y working area max.: 2000 mm Control system: TCI CNC 4.0 Operating hours: 13,859 hours Laser beam on: 2938 hours Sheet metal thickness max.: 60 mm Workpiece weight max.: 3000 kg The waterjet cutting machines from TCI Cutting combine state-of-the-art European technology with individual further developments, based on many years of experience in the industry, both nationally and internationally. The PB-C COMBI combines the advantages of waterjet cutting technology with those of HD plasma cutting in a single machine. This offers our customers cutting precision, versatility, and speed, as well as the quality typical of HD plasma. In short: a complete solution that guarantees the highest surface quality for cuts of varying complexity, material thickness, and material type. Cedpfx Aij Afm Hiszori The machine enables the cutting of workpieces with pure water or with water and abrasive, even with very hard and thick materials. As a result, it covers a broad spectrum of cutting processes, which can be adapted to the needs of the customer and the respective industry. In waterjet cutting, the workpieces are cut cold, which avoids changes in the chemical composition and deformations – especially in metals. - Plasma source Hypertherm XPR300 - Various nozzles for the cutting head - High-pressure pump KMT SLVI 50 STD Maximum pressure: 3800 bar Power: 37.5 kW - Water treatment system - Silo and dosing system for abrasive sand - Slurry flushing and filter system

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Berg und Schmid Model: PERFECT 275 Machine number: 55.025 ELECTRICAL DATA Operating voltage: 380 V Frequency: 50 Hz SAWING DATA Codpfxo Adzkys Aizori Speed: 1,425 RPM Saw blade diameter: 275 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 900 mm Width: 600 mm Height: 1,600 mm Weight: 200 kg

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 253800 € 6 kW Wechseltisch 25 mm 15 mm 20 mm 10 mm 12 mm 6100 x 2070 mm 6100 mm 2070 mm 125 mm 6096 x 2032 mm 240 (für 3 - 12kW) / 400 kg/m² 5800 (für 3 - 12kW) / 960 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 42 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. Csdpfx Aiox U Elnjzjri The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software Lantek for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Air condition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 6 kW 12 kW 15 kW 20 kW Mild steelS235 25 30 35 40 Stainless steel(304) 15 25 35 40 Aluminium (5083) 20 30 35 40 Copper 10 15 15 15 Brass(CuZn39 Pb3) 12 20 20 20 OPTIONS: Suction unit with filter Automatic nozzle change

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2024, suspension: air, tire size: 385/65 R22,5, front tire size: 385/65R22,5, rear tire size: 385/65R22,5, KRONE Cool Liner 3-axle refrigerated semi-trailer, SDR 27 eL4-DS, Krone axles. 1st axle: lift axle, LED taillights, 2 roll-compression buffers (4 rollers per side), pallet box, 36-piece tool box, Duoplex floor. Body length overall: 13,311 mm, body width overall: 2,490 mm (=flower width), internal height: 2,630 mm. 1 row of slotted-hole lashing rails at 780 mm, double-deck rails. Refrigeration unit: Thermo King SLX i 300-50, diesel/electric. Total refrigeration hours (diesel + electric): 2,470 h. Sale exclusively to commercial enterprises, with all warranties excluded. Errors and prior sale excepted. Cedpo Af Ipnjfx Aizsri

Condition: good (used), Perfecta 92 Paper Cutting Guillotine The machine is in very good condition, serviced and ready to use. Technical Specifications: Cutting width: 920mm Codps Af E Hnefx Aizori Stack height: 120mm Minimum scrap: 18mm Weight: 2300kg Power supply: 400V Equipment: – Brand new programmer and complete control system – New photocells – Air table – Hydraulic clamp with variable force adjustment – Side tables – Tool kit – Spare blade

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: Bilz, Thread cutting chuck MK3 mount -Type: DSPL 3 Codpfxo Af Igbo Aizjri -Cutting range: M 9 - M 24 -Bore: Ø 19 mm -Dimensions: Ø 92 x 282 mm -Weight: 5.4 kg

Condition: excellent (used), Max. workpiece diameter: 50mm Crsdpfx Ais Af U Hxozoi Max. workpiece length: 600mm