Used Cut To The Length Line for sale (53,005)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, F45 Pro Drive - Year of manufacture: 2017 - Top control panel Djdpfxoypmqae Aa Nskl - 3200 mm - Saw blade diameter: 500 mm - 5.5 kW - Scorer preparation - Digital display on parallel fence - Cutting width 1100 mm to the right of the blade - Paper template holder - Angle display on cross slide - Duplex mitre fence Price ex-location Transport available at extra cost!

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm Djdpfx Ashzbipoa Njkl - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: excellent (used), maximum cutting width 250 mm feed table length 3 m outfeed table length 3 m Dkedpfxjyudbgo Aa Nel year of manufacture 2003 motor power approx. 2.2 kW power supply 400 V weight 600 kg

Condition: used, Year of construction: 2013, functionality: fully functional, One side scanner for sorting or optimization: Width: 30-200mm High: 13-50mm Dsdpfjv Tlgdox Aa Nokl Length: 2-6m Possible to detect: Knots, wood structure, cracks, end cracks, color variations etc. Scanning speed: up to 200m/min Possible to scan different profiles

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defecting mode. This machine is ideal for precise solid wood cutting, featuring automated detection and elimination of material defects. Dsdpfoyxwyrjx Aa Nekl Technical specifications: Maximum infeed length : 6300 mm ( Pusher ) Minimum cutting length : 50 mm Maximum cutting width : 360 x 30 mm / 240 x 160 mm Maximum feed speed : 60 mtr/min Main engine( Saw) : 7,5 Kw Sawblade diameter : 400 mm Year of construction: 2001 Rotary current: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Nominal output: 11 kW Fuse protection: 25 A Machine measures : Infeed : L 7600 x B 800 x H 1100 mm / Sav : L 1400 x W 1200 x H 1650 mm / Outfeed : L 5200 x W 600 x H 900 mm. Overall working hight : 850 mm Defect Detection: Automated identification and elimination of wood defects (knots, cracks, etc.). Yield Optimization: Software-driven calculation to ensure the best possible use of the raw timber. Manual in English and German / Electric diagram included. Can be examined in working condition Request WHATSAPP video

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, saw blade diameter: 500 mm, cutting height (max.): 89 mm, cutting width (max.): 200 mm, Optimizing cross-cut saw PAUL C11 MKL Year of manufacture: 2014 The machine is equipped with a measuring station and 5 ejectors. Technical specifications: Cutting height: 3 - 89 mm Width: 30 - 200 mm Minimum workpiece length: 300 mm Saw blade diameter: 500 mm Saw motor power: 5.5 kW Dkodpfsx H Uaxsx Aa Nol

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 700 mm, table width: 6,000 mm, OPTIMIZING AND DEFECTING CROSS-CUTTING LINE CURSAL MOD. TRV 2000E 700 SX Line configuration: - Motorized roller conveyor 6000 x 760 mm - Chain feeder with singulator (buffer magazine) for boards from 4500 mm up to 6000 mm, capacity 6 boards - Optimizing and defecting cross-cutting saw Cursal mod. TRV 2000 E 700 SX Dodpfxeywdx Sj Aa Nekl - Roller feed system - Blade diameter 700 mm - Max feed speed 150 m/min - Cutting section 480 x 65 mm - Cutting section 530 x 30 mm - With chalk defect marking system - Year 2015 - Outfeed conveyor belt 5000 x 600 mm - Bilateral overhead ejector - N. 2 transfer conveyors for semi-finished parts (1 right + 1 left) - N. 2 accumulation roller conveyors (1 right + 1 left)

Condition: used, Year of construction: 2019, Year: 2019 Condition: operational - Still in production, inspection possible Configuration: - Automatic pallet exchange - When a pallet is completed, the system automatically ejects it to the side output and feeds a new pallet from the infeed track - Automatic sheet feeding and counting - Automatic jogging and aeration - Automatic air removal from the pile - Automatic feeding into the airboard loader - Automatic loading of airboards - Automatic unloading of the pile onto a pallet, including airboards Basic functions of the BASA system: - Automatically loads materials from a pallet - The transport system allows sequential loading from 2 pallets arranged in line; the empty pallet is automatically ejected - Counts / deducts the exact number of sheets Dedpfx Aasyv Epps Njkl - Jogs, aligns, aerates, and presses the piles - Places jogged piles onto separator cardboard - Subsequently separates piles using an airboard - Unloads piles onto a pallet - The BASA system only requires an operator to input or select a job in the system and to supply full pallets and remove empty ones - In off-line mode, the system can “feed” 2–3 cutting machines depending on the material used and pallet loading quality Technical specifications: - Max. format: 770 × 1070 mm - Min. format: 700 × 650 mm - Sheet counter: GTS

Condition: ready for operation (used), functionality: fully functional, Press line for manufacturing can ends (tops and/or bottoms) Dkjdpfxox Ezuye Aa Nel Comprising: - Bliss 1831 double die press - Bliss double curler - IMC / Grace compound liner - Drying oven - Production capacity: up to 600 ends per minute

Condition: excellent (used), Year of construction: 2013, Cutting line: ERLENBACH mod.ESA 5 (used for less than a month). Year of manufacture: 2013 Packing machine, model PPZA-1300/6 (used for less than a month). Year of manufacture: 2011 Djdpfx Asv Hm A Tea Nskl - For blocks max. L x B x H: 5100 x 1260 x 1260 mm - Horizontal cut: max. 61 oscillating wires - Vertical cut: max. 11 wires - Cutting speed: 1,5 m/min. - Automatic wire setting - Waste grinding (bottom, top, side)

Condition: like new (used), Storti wood cutting line - Italian production - edger with a central disc with a pneumatic jump RM 400 S - crosscut saw TP2 Dkjdomv Ehzspfx Aa Nel - multisaw Multibi R16 - minimum material length 700 mm - maximum element width 500 mm - maximum element height 140 mm - line feed speed 30 m/min - total power 110 kW - space requirement 26 x 5.5 m TECHNICAL PARAMETERS: 1 Strorti RM400 S edger - cutting width max 330 mm - cutting height max 140 mm - element width max 500 mm - maximum element length 5000 mm - engine power 3 x 11 kW - seven steel toothed bottom pulling rollers - two upper toothed pulling rollers - pneumatic material pressure - the jump of the central disc is pneumatic - feed table 5000 mm roll width 500 mm diameter 80 mm - receiving table with edging 5200 mm roll width 500 mm roll diameter 140 mm 2 Storti TP2 crosscut saw - width of the finished element max 1600 mm - width of the finished element min 700 mm - cutting height min / max - 20/140 mm - disc diameter 600 mm - spindle diameter 30 mm - engine power 2 x 7.5 kW - feed roller table 2570 mm width of rollers 500 mm diameter 100 mm - diameter of connections 2 x 160 mm 3 Multisaw Storti Multibi R 16 - material width max 150 mm - material height max 140 mm - engine power 2 x 22 kW - disc diameter max 300 mm - spindle diameter 50 mm - spindle height 160 mm - hydraulically adjustable feed - hydraulic side material pressure - two upper pneumatic clamps - connector diameters 2 x 220 1 x 160 mm - receiving conveyor 2000 mm - cross conveyor table 3200 x 1100 mm

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 467334, Manufacture year 2010 Machine specifications: - Push infeed, max. length 6300 mm - Automatic length measuring and chalk reader - Cutting width 40 – 420 mm - Cutting height 15 – 170 mm - Min. cross section 20 x 10 mm - Max. cross section 270 x 170 / 410 x 30 mm - Motor 13.5 kW - Total electrical load approx. 22 kW -Operating pressure approx. 8 bar - Saw blade diameter 630 mm / bore 30 mm Consisting of: 1. Cross chain infeed system 8 pc. chain transport with 3 latch rows 2. Push infeed system with liftable pusher Infeed length 6300 mm, length detecting and chalk reader 3. OptiCom Direct controller 4. Opticut cross cut saw unit S90 XL Djdpfxoypvdio Aa Nekl With side pusher and waste gate 5. Outfeed transport belt

Condition: excellent (used), Year of construction: 2019, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 8135.44, cutting height (max.): 100 mm, cutting depth: 300 mm, Great saw always cuts to 0.5 for age hardy used Dedpsyngnisfx Aa Nskl

Condition: refurbished (used), PALLET LINE MULTIBLADE AND CROSSCUTTING MACHINE A.COSTA VOLLMER ARTIGLIO PRIMULTINI STORTI We also have all kind of Sawmill machines Djdpfsqag T Asx Aa Nokl

Condition: like new (used), Fully mechanized line for splitting and cutting (Masterflex+Paul) consisting in: Dedpokt I Uyofx Aa Nokl - transverse conveyor for 2 packages - automatic destacking and singularization installation with slat recovery with conveyor included - transverse conveyor for circular feed piece by piece - trolleys on the rail for circular feeding - circular Masterflex provided with 4 movable blades, axis to axis, free passage width of 1,000 mm, cutting height 100 mm - 2 motors of 50 KW, 4 releases electrically controlled by joystick, provided with a control panel - timber evacuation conveyor provided with a waste separator (edges and hems) - waste conveyor + automatic waste cutting pendulum - parts recovery conveyor with return to the operator for repair - transversal conveyor with singularization for feeding optimizer Paul - optimizer Paul model, passage width of 1,000 mm, cutting height of 100 mm, equipped with marking station for defects, with laser (without chalk) - sorting line by optimizer with 20 ejectors. Installation is in a very good working condition.

Condition: used, Year of construction: 2004, machine/vehicle number: 7441238, Schneidlinie Autotrimm PACE / Cutting Line Autotrimm Polar 137XT-AT PACE Schneidlinie Lift Rüttler Ablader / Cutting Line Lift Jogger UnloaderYear 2004 - Serial-No. 7441238 Schnittbreite / Cutting width max. 1370mm Autotrimm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table große-Luft-Seitentische / large airbed side tables Lichtschranke / Light guards Ersatzmesser / Spare knives CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10AStapellift / Stack Lift Polar LW 1000-4 Dkodpfeiqvbmex Aa Njl Baujahr / Year 2004 - Serial-No. 7493313 Palettengröße / Pallet size max. 800 x 1.200mm Wannengröße / Size of platform 840 x 1.270mm Hub / Stroke max. 850mm Tragkraft / Carrying capacity max. 1.000kgRüttelautomat Luftausstreichwalze / Automatic Jogger air-removing roller Polar RAH-4 Entladung zur Hintertischbeschickung / unloading for rear-table feeding Baujahr / Year 2004 - Serial-No. 7484103 Tischgröße / Size of table 900 x 1.150mm Ausschiebeformat / Pusher size . 750 x 1.140mm Lagenhöhe / Height of ream min. 30mm - max. 140mmStapelregal / Piling-board shelf Polar STR-1000-4 Baujahr / Year 2006 - Serial-No. 7475003 Format min. 420 × 570mm - max. 750 × 1.140mm Größe Regalboden / Size of shelf board 900 × 1.170mm Lagenhöhe / Height of ream min. 30mm - max. 140mm Tragkraft / Carrying capacity max. 600kg Anzahl Pufferplätze / Number of buffer spaces 5Ablader / Unloader Polar TR 130ER-4- Einsatzbereich / Application for Size min. 400 x 400mm - max. 780 x 1.120mm Nutzengröße / Label size min. 105 - 148mm Lagenhöhe / Height of ream min. 40mm - max. 165mm Stapelhöhe / Pile height max 1.300mm Tragkraft / Carrying capacity max. 200kgSpäneförderband / Waste Conveyor Busch Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 2005, saw blade diameter: 800 mm, overall weight: 2,960 kg, 15 kW; 400 V; Djdjygk Haspfx Aa Nokl

Condition: excellent (used), functionality: fully functional, Stainless steel cutting/sorting line (3x) Consists of: - Sieve table: 800 x 1300 mm - Sorting table: Working width: 1500 mm Overall dimensions: 1600 x 1000 mm Dksdpfx Aeyku Hfea Nel - Pump unit: Cornell brand pump Stainless steel tank: 1070 x 1580 x 1320 mm The stainless steel cutting and sorting line is a comprehensive solution dedicated to wet processing and grading of vegetables. The system combines mechanical sorting on a sieve and roller table with advanced water transport. A key component is the high-performance Cornell pump integrated with a dedicated tank, enabling safe product transfer in a water environment and minimizing the risk of mechanical damage to the produce.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Laminated glass cutting line BOTTERO 545 VSX-46 + 100 BLC-J With low-e deletion Year of production: 2008 Maximum laminated glass cutting length: 4600 mm Dksdpfx Aaoxlqzae Nol Maximum laminated glass thickness: 10 + 4.56 PVB + 10 mm Tilting loading table with belts 101 BLC-J is included Very good and clean condition Good working order, tested As is Available immediately

Condition: used, Belt line cutting device, cut-to-length line, cut-to-length shears, lever cutting machine, lever cutter -Cut-to-length system: with additional lever cutter, made from slats/blinds production -Cutting width: max. 210 mm Dkodpfxeqh Efio Aa Njl -Cutting thickness: max. 0.5 mm -Lever cutter: IDEAL 2035 -Transport dimensions: 1025/500/H1240 mm -Total weight: 122 kg

Condition: used, functionality: fully functional, travel distance X-axis: 3,650 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, total height: 3,300 mm, total width: 8,800 mm, total length: 6,600 mm, table width: 2,200 mm, table length: 4,000 mm, overall weight: 10,500 kg, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, CNC cutting line with two interpolated 5-axis spindles, mounted on two opposing independent beams, with a belt table, for full-depth or incremental cuts on marble, granite, engineered stone and similar workpieces. Dksdpexdi Agjfx Aa Nol

Year of construction: 1993, condition: ready for operation (used), A complete cutting line for sheet metal processing is available. 1) Decoiler Schleicher H-B4-1250, year of manufacture: 1983, power: 11kW, max. load capacity: 12500kg, strip thickness range: 0.5mm-1.25mm, max. strip width: 1100mm. 2) Straightening machine Schleicher RM 8-53/160, year of construction: 1980, power: 7.68kW, strip thickness range: 0.5mm-1.25mm, strip width range: 300mm-1000mm. 3) Trimming shears. 4) HSK HSKW/SF shears, year of manufacture: 1993, max. strip thickness: 1.5mm, max. material width: 1280mm. 5) Stacking line Schleicher, year of manufacture: 1980, max. load capacity: 1000kg, strip width range: 300mm-1000mm, strip thickness range: 0.5mm-1.25mm, feed length range: 200mm-1250mm, power: 1.5kW. On-site inspection is possible. Djdow Az Rpjpfx Aa Nokl

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Shape float glass cutting line LISEC baseCUT-37/26 + BASE TABLE BREAK With low-e grinding Year of production: 2015 Maximum glass size: 3700 x 2600 mm Djdpoxlq Nwefx Aa Nokl "4 in 1" - with tilting, cutting, breaking and low-e grinding Includes 2 pcs. free-fall racks LISEC LBS-37/26FF Glass thickness: 2 - 19 mm Glass cutting speed: up to 140 m/min In very good and clean condition Good working order, tested Good working order, tested As is Availability immediate

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 98125446, saw blade diameter: 500 mm, cutting height (max.): 75 mm, positioning accuracy: 1 mm, cutting width (max.): 180 mm, CNC full optimization cross-cut sawline PAUL 11MKL for soft and hard wood. Line include : infeed conveyor with length 11525 mm, double side table for marking wood defects, measuring station with luminescence and light barrier for wood start and end detection, sawing station and outfeed conveyor 11500 mm sorting line with 5 side pushers to sorting table. Wood input length 2000-6000 mm Wood width 30-180 mm Wood thisckness 6-75 mm Min cross-section 30x15 mm or 45x6 mm Max cross-section 130x75 mm or 180x45 mm Saw blade diameter 500 mm Saw motor 5.5 kw , saw stroke pneumatic, saw cycles 0.4 sek Dkjdpfx Aasxrr S He Nel Feed speed max 200 m/min Power consumption 11.4 kw Control software CNC MAXI 5 Premium Line is in full working condition

Condition: ready for operation (used), Maximum saw blade diameter: 550 mm Motor power: 5.5 kW Maximum cutting length: 5 m Djdpjxx Scfjfx Aa Njkl Discharge table with four ejectors Control via touchscreen panel with inPush software Loading table with chains Length: 7800 mm Depth: 1600 mm Weight: 1500 kg Saw blade speed: 2800 rpm Year of manufacture: 2014 CE marking